Help configuring Audition with Virtual Audio Cable and Skype

I'm using the latest version of Audition, along with Virtual Audio Cable and Skype for my PC (Windows 7). While I'm able to properly configure my own microphone (Edirol UA-25), to be captured by Audition on track 1, I can't seem to get track 2 configured properly to capture and record.
I seem to be missing a step.
Is there anyone that can help me properly configure or offer an alternative that will allow me to record my microphone and the Skype call on two separate tracks?
Thanks in advance for your expertise!

Others may have made it work but I've never persuaded Audition to record a mic in one channel and line out (Skype) in the other. Since Audition it designed to work with a single ASIO audio interface, this makes sense.
My solution is to use a little utility called the iFree Skype recorder: Record Skype Calls with iFree Skype Recorder - Your FREE Skype call recorder software
It works well for me, keeping the outgoing part of the call and the incoming separate for easy editing later. It works fine with an external audio interface and good mic as long as Skype is set up to work that way.
The only drawback is that it records in MP3 not wave but, given the quality of most Skype calls, this isn't really a deal breaker.

Similar Messages

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver. This only occurred on the rented video and on recorded shows on my cable DVR. previews and other content on Apple TV are fine. Any ideas??

Previews and trailers do not contain 5.1 audio.
If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

Disable Driver Enforcement for Virtual Audio Cable?

Hi, I'm trying to get this thing called "Virtual Audio Cable" Working, but It is apparently not signed, so I cant even use it. Is there a fix to this? I've tried to use bcdedit -set. I have tried to use DSEO Too, but I dont know what file it wants
me to sign, so I'm confused. So if anyone has any idea what to do with this, it will be very helpful.
(PS, Not really the best with computers. But if you guide me through what you want me to do. It'll be easy.)

Hi,
Do you mean that you're unable to install the unsigned driver for Virtual Audio Cable? If so, you can choose “Disable Driver Signature Enforcement” during boot, this allows unsigned drivers to load for this boot only.
You can refer to workarounds mentioned in blog below
How to install unsigned drivers
http://blogs.msdn.com/b/matthew_van_eerde/archive/2014/04/05/10211068.aspx
And there's a security policy to configure the Unsigned driver installation behavior in previous Windows versions, but removed since Vista
Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options\Devices: Unsigned driver installation behavior
while you can refer to this KB to re-add this policy option, this KB is for Windows Vista, but I have tested in my Windows 7 enterprise, it also works.
http://support2.microsoft.com/?kbid=947250
Add: as Rick mentioned, Eugene Muzychenko should be more familiar with this product
Yolanda Zhu
TechNet Community Support

Virtual-Audio-Cable for Arch linux

Hello guys,
I'm quiet new to Arch-Linux and I love Arch-Linux (even if I sometimes hate it ).
I wont to have and virtual audio-device where I can put some Out-Put of any program (for examble VLC) to an input device like a Microphone used by any application for example Teamspeak.
In Windows I have the program Virtual-Audio-Cable for this and I already read that pulse-audio should serve this functionality, but when I install pulse-audio I don't get this sound-redirecting to work and I get Bugs like my music is stopping when I start Teamspeak or any application with sound output.
So I wan't to have it (if possible) without using pulseaudio (I already removed it from my system).
I'm thankful for any hints.
Sincerely Basti
Last edited by basti890 (2015-04-23 12:59:28)

pulseaudio comes with the module module-virtual-source. You can load it with pacmd and then use it like a virtual audio cable in pavucontrol.
pacmd load-module module-virtual-source source_name=loop_source uplink_sink=loop_sink
Then send sound to loop_sink and record from loop_source.
Edit: If you want to listen and record at the same time, then you should be able to use module-virtual-sink I think and record from the monitor channel for the virtual sink.
http://pulseaudio-discuss.freedesktop.n … ce-modules
With pure alsa it should be possible with the aloop driver.
Otherwise you'll have to learn JACK.
Last edited by progandy (2015-04-30 19:17:08)

New iPod nano, comes with a USB cable and CLIP? Whats it for?

My new ipod 2gb nano comes with a usb cable and a little clip or stand type thing that the nano can sit in and at the bottom has a hole that the usb wire sort of fits through but it isn't made to sit on the desk, its more like a clip of something, any ideas what this is or how to use it?

The extra piece is the adapter for the Universal Dock. The dock has a well in it and there's an adapter for each size of iPod that goes into it.

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

I found that the Thunderbolt input accepts the mini-DVI (in my case converter to VGA for a tutorial use monitor)
BUT, you have to really oush it in 'til it clicks. I thought it too loose until I tried it. works just fine!!
i get a solved for my own LOL
Ed

Macbook came with an AC cable and an AC plug, is one better for charging than the other?

Macbook came with an AC cable and an AC plug, is one better than the other for charging?

The 3-prong AC cable provides for proper gorunding, and will alleviate any "vibration/electrical" sensation on the casework.

HT1476 i plug in my phone to the charger and i tried with two different cables, and it seems like it is not making connection to the clable?

i plug in my phone to the charger and i tried with two different cables, and it seems like it is not making connection to the clable. but it is not charging. what are some possible ways o fix that?

When you plug in your charger and attach it to the MBP, initially the light will turn green. If the MBP needs charging, a few seconds later the light will turn amber. That is normal. If your symptoms are different, then they may or may not be a problem.
Ciao.

Any experience with tep pocket WiFi and skype while traveling

Anyone had any experience with tep pocket WiFi and skype while traveling. Seems like a good solution in the UK

Did you ever get an answer to this or take the plunge? I'm curious what you found out...

Help with M-Audio interface and GB

First time with any kind of audio interface and GB. I just got a M-Audio Mobile Pre USB and am a little confused by the monitor settings. Been to the web site and read the manual and they said turn the monitoring off in garageband so I don't hear double monitoring. My question is, is it possible to record and hear the effect I have chosen as well. With monitor off all I can hear is the dry signal.I never had to worry about this before since I was going directly into the Mac, no interface. Is there a FAQ or web site that can help a newb like me with these most basic questions?

Sounds like good advice Christoph. I have been only recording bass thus far, very few effects and no latency yet. I was puzzled by the M-Audio manual that says to turn off the software monitor but on the M-Audio web site forum an expert says to turn on the monitoring in garageband. This will all makes sense to me soon I hope.

I want to use my Macbook Air 2011 as an external disk for my iMac 2011. I connected the two with a Thunderbolt cable and when starting the MacBook Air I pressed "T" and it worked except with Office documents. Can anybody help?

I want to use my MacBook Air as an external disk to my iMac. I talked to Apple care and we solved it by connecting a Thunderbolt cable between the two computers. I then turn on the MacBook Air while pressing the "T" and it works. I can sit and work on my iMac and grab/change/save the files that are in my MacBook Air EXCEPT for the Microsoft Office files. I called Microsoft and they can't solve it. They say it might be a problem with the Thunderbolt cable. Has anybody have this problem?
Both computers are 2011 and they both have Office 2011.
Thanks in advance,
Alejandra

For Word it says "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example, /)"
For Excel it says "the file could not be found. Check te spelling of the filename, and verify that the file location is correct. If you are trying to open the file from your list of most recently used files on the File menu, make sure hat the file has not been renamed, moved or deleted.
I tried this with many different documents, and I always get the same message.

TS3744 I updated I Tunes today and now I cannot open my I-Pod I Touch. The screen only shows the I tunes icon with the USB cable and an arrow pointint to the icon and I can't get it off of my screen or access my home screen Help!

I updated I tunes today , now I am unable to open my I Pod I Touch, the screen shows the I Tunes logo with a USB cord and arrow pointing back up to the icon, can't access my Home page

The screen indicates that your device is in recovery mode. It has to be restored by connecting it to a computer with itunes. Restore to factory settings.
This happens sometimes. Hopefully you have a backup.
HTH

Adobe Audition with M-Audio Fast Track Pro mic input

I must be missing a setting somewhere. I have two mics going into the M-Audio Fast Track Pro (XLR inputs). Mic 1 works fine but no input from Mic 2 although I have audio coming through my headsets when speaking into Mic 2 - it just doesn't register in Adobe Audition. I have switched mics and cables and all are fine. The issue is with Mic 2.
Again, Mic 1 is working fine and Mic 2 is picking up audio and feeding to my headphones but not to Adobe Audition. I have all the latest drivers installed.
I am on a Win7 (32bit) system. Microphones are Shure PG-42's (phantom powered condenser microphones).
I contacted M-Audio support and phone-verified that all Fast Track Pro settings were proper. Seems to be a setting or driver issue in Audition. I've spent hours trouble-shooting to no avail. In the meantime, I'm using a Y-splitter running both mics into Mic Input 1 on the Fast Track Pro which works fine but I really need seperate control over each microphone. I have interviews coming up soon and would like to find a resolution quickly. Can anyone help? Thanks!

Archie! Good stuff! I'm almost there...
I've got my Adobe Audition set up with the settings you gave me - everything is armed and good-to-go... but then...
When I hit record Tracks one and two look like they're recording but there is no level (no audio) going into the tracks.
If I go back to the Edit view and try to record the entire fills with green as if I'm filling it 100% with sound. This has never happened before.
I suspect I've got something hosed-up in my "Audio Hardware Setup" under the Edit section.
My selections for Audio Driver Setup are:
1) M-Audio USB ASIO
2) ASIOforALLv2
3) Audition 3.0 Windows Sound
If you could give me some direction as to the settings in "Audio Harware Setup" I feel I've almost got it.
Thanks!

Connecting apple tv with optical audio cables

I have a new apple tv and need to connect via dvi to hdmi on my tv. problem is the audio. I am supposed to connect via option audio but don't know which cables to purchase and where it needs to be connected to FROM apple tv.

Due to the limited number of HDMI connections on my TV I upgraded my home theater receiver to one with 4 HDMI inputs. I use it for all video and audio switching and the TV stays on one input. Much cleaner cabling as well. An HDMI switch is also an option to look at too. Be aware an automatic switching HDMI switch probably will not work due to the way the ATV sleeps (not sure with the ATV2's). You'll probably need a manual one with push buttons or a remote.
For the problem at hand, first you need to know what audio input you need with the DVI in on your TV before we can help. To start with you are going to be using optical audio out from the ATV, a Toslink cable out of the ATV to be precise. If your TV's DVI connection matches up to a Toslink digital input that's all you need.
More than likely it has a single RCA jack which would be a Digital Coax in. In this case you will need a Digital Toslink to Digital Coaxial converter as well as a Digital Coax cable. The Coax cable can be a simple audio cable with RCA jacks.
If the DVI on the TV matches up with an analog in, usually red and white RCA jacks, you are going a Digital Toslink to an analog L/R stereo converter. And of course the RCA stereo cable.
MonoPrice.com is a great resource for cheap cables and converter boxes. Link to digital converters http://www.monoprice.com/products/subdepartment.asp?c_id=104&cp_id=10423

Newbie trying to configure xfi with virtual

hi,i'm trying to configure my soundcard with virtual dj so that i can monitor through the headphones one track whilst another is playing thru the speakers. I'm not sure how to do this - have selected Asio in 'soundcard' on virtual dj - am then able to select between running master thru channels and 2, with phones thru 3 and 4 or vice versa.How do i effect this in the console launcher please?Am in audio creation mode but having no luck!?thnaksBArry

anyone? technical support is ringing out.thanks

Help configuring Audition with Virtual Audio Cable and Skype

Similar Messages

Maybe you are looking for