Help configuring AVR to accept Apple TV

Help. Trying to get my Apple TV3 configured to play with my Harmon Kardon 354 AVR (HK 354 AVR).
TV is a Nuvision. HK 354AVR is connected to Nuvsion via HDMI. A BD player is connected to the HK 354 AVR on HDM1. TV and BD player audio output is connected to 7.1 speakers. Everthing works. BD player is connected to HDMI1 on the HK AVR354. BD and TV audio is output to 7.1 speakers. To get the BD to play I select DVD on the HK AVR and HDM1 on the TV, BD player works, audio is thru 7.1 speakers.
When I connect HDMI out from AppleTV directly to Nuvsion TV onto HMDI 2 port. Select HDM1 2 on TV and the Apple TV works fine.
Sound and video are fine. Sound is from TV speakers.
...But now I want the Apple TV sound connected/driven thru HK 354AVR.
When I connect the Apple TV HMDI out directly to the HK 354AVR using its HDMI 2 connection, nothing works when I select HDMI 2
Do I need to connect the Apple TV TOSL link to the HK AVR 354 port 2 to have audio driven thru HK? Can the TOSLink be 100' cable? (The TV and AVR are in seperate rooms)
How do I tell the HK AVR 354 that the Apple tv is on HDMI 2?

a bad crash could have caused a hardreset of sorts
but you can just sync and get them back and if you only had them on
the atv then that was your first misstake as they then will be gon forever

Similar Messages

Configure postfix to accept inbound mail only from Google

I like to host my own email on a Mac Mini running OS X Server. I’ve also looked for solutions that allow filtering out SPAM before the mail gets sent to my server. For many years I used Postini’s spam filtering service to clean incoming email before Postini forwarded the mail on to my server. I now use Google mail, part of Google Apps service to remove spam and to archive all the mail.
The approach of letting Google clean emal before sending the mail on to my OS X Server uses two domains, one a “public” domain for incoming email and another a “private” domain used only for forwarding the filtered email to OS X server.
All went well with the defult Postfix configuration that came with OS X Server for a few months, then SPAM started creeping into my “private” domain as various spammers discovered my private email address and started sending mail directly to the Mac Mini, bypassing Google.
Whenever I had spare time I would search the web looking for how to configure Postfix on OS X server so that email from Google and my other machines would be accepted and all other email would be blocked. There were lots of write-ups on how to relay outgoing email to Google, but I couldn’t find straightforward configuration instructions for configuring Postfix to only allow incoming email forwarded by Google or coming from my machines and block all other sources.
With a Google apps account you get telephone support so I gave Google a call and within a few rings got a very pleasant guy who listened to what I wanted to do and didn’t have the configuration setup, but did offer to send me a document showing the blocks of IP addresses used by Google for sending email.
I’ve posted several requests for help doing this type of configuration and never received responses that made sense. So in the interest of helping anyone else that wants to configure Postfix to accept connections from a set of specific IP addresses and refuse connections from all other connections for inbound email, here is what will get you going:
Use your favorite text editor to edit the Postfix configuration file (I use BBEDIT) but use whatever you like.
On the OS X Server open this file:
/Library/Server/Mail/Config/postfix/main.cf
Immediately do a “save as…” to make a backup copy with a different name, such as …mail.df.back1 in the same directory so you can revert to the backup if necessary.
substitute your domain names in the following commands:
public.com   - change to your publicly advertised routable domain
hidden.com - change to your OS X Server routable domain
lan.com - change to your OS X Server lan domain, should be registered to make things clean and shouldn’t be .local
10.6.18.0/24 - change to your LAN subnet
host - change to your host name
Your Postfix configuration file should contain these commands (and probably more). Each situation varies so do what you have to for your situation….
Have Postfix add your public domain name in the email header
myorigin = public.com
mydomain_fallback = localhost
message_size_limit = 41943040
biff = no
aaa.bbb.ccc.ddn - Your publicly routable IP addresses provided by your ISP
Let Postfix know your LAN network, the routable addresses you have from your ISP, and the Google networks where the Google email servers live. Get the latest list of Google networks hosting email at this address: https://support.google.com/a/answer/3070269
mynetworks =
          10.6.18.0/24,
          127.0.0.0/8
# ISP provided routable IP Addresses, individually or cidr aaa.bbb.ccc.0/24 notation if possible
          aaa.bbb.ccc.dd1,
          aaa.bbb.ccc.dd2,
          aaa.bbb.ccc.dd3,
          aaa.bbb.ccc.dd4,
# Google networks
          64.18.0.0/20
          64.233.160.0/19
          66.102.0.0/20
          66.249.80.0/20
          72.14.192.0/18
          74.125.0.0/16
          173.194.0.0/16
          207.126.144.0/20
          209.85.128.0/17
          216.239.32.0/19
smtpd_client_restrictions =
          permit_mynetworks
          permit_sasl_authenticated
# Comment out the spam blacklist sites since Google does spam filtering for you
#          reject_rbl_client bl.spamcop.net
#          reject_rbl_client zen.spamhaus.org
#          permit
# If you get this far, reject because the IP address isn’t one of yours or Google’s
          REJECT
The rest of the config file should be pretty much what you already have in place
recipient_delimiter = +
smtpd_tls_ciphers = medium
inet_protocols = all
inet_interfaces = all
config_directory = /Library/Server/Mail/Config/postfix
smtpd_enforce_tls = no
smtpd_use_pw_server = yes
relayhost =
smtpd_tls_cert_file = your cert file path here
mydomain = hidden.com
smtpd_pw_server_security_options = cram-md5,digest-md5,login,plain
smtpd_sasl_auth_enable = yes
smtpd_helo_required = yes
smtpd_tls_CAfile = your file path here
content_filter = smtp-amavis:[127.0.0.1]:10024
smtpd_recipient_restrictions =
     permit_mynetworks,
     permit_sasl_authenticated,
     check_policy_service unix:private/policy,
     reject_unauth_pipelining,
     reject_invalid_hostname,
     reject_unauth_destination,
     reject_unknown_recipient_domain,
     reject_non_fqdn_recipient,
     permit
header_checks = pcre:/Library/Server/Mail/Config/postfix/custom_header_checks
myhostname = host.hidden.com
smtpd_helo_restrictions = reject_non_fqdn_helo_hostname reject_invalid_helo_hostname
smtpd_use_tls = yes
smtpd_tls_key_file = your path here
enable_server_options = yes
recipient_canonical_maps = hash:/Library/Server/Mail/Config/postfix/system_user_maps
virtual_alias_maps = $virtual_maps hash:/Library/Server/Mail/Config/postfix/virtual_users
virtual_alias_domains = $virtual_alias_maps hash:/Library/Server/Mail/Config/postfix/virtual_domains
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, ipv6.$mydomain, public.com
mailbox_transport = dovecot
postscreen_dnsbl_sites = zen.spamhaus.org*2
maps_rbl_domains =
This config file should do the job of keeping out everyone but the Google email servers and devices on your WAN and LAN.
Any suggestions to make this better or more efficient welcomed!

After a few telnet tests I can answer my own question: It makes an open relay server to spammers! But to solve the former issue with the connection refuse, I had to switch to virtual hosting in the advanced tab of the mail service and add my own domains.

Ghostscript configuration problem: configure: error: no acceptable C compil

hi
I'm having a problem in configuring ghostscript.
When I run "Configure", I get this message:
+Last login: Thu Jun 24 09:04:52 on ttys001+
+/espgs-8.15.4/configure ; exit;+
+iMac:~ timgeers$ /espgs-8.15.4/configure ; exit;+
+checking for gcc... no+
+checking for cc... no+
+checking for cc... no+
+checking for cl... no+
+configure: error: no acceptable C compiler found in $PATH+
+See `config.log' for more details.+
logout
I seem to need to change the path, but I have no idea how to do that. Can anybody help?

bertvtvt wrote:
no, I haven't tried this. I don't know much about these things. How do I change that root and what command do I have to use?
Is this in "terminal"? I haen't worked with this yet...
My Ghostscript-folder is located in my Macintosh HD folder
Yes, you will have to use Terminal. Sorry but I assumed you were already using Terminal. I guess you simply double-clicked on a file within the GS folder...
Anyway, after you open Terminal you will see information similar to what you provided previously, for example:
Last login: Thu Jun 24 09:04:52 on ttys001
iMac:~ timgeers$
This shows that your Mac is called iMac and it also shows the account name you logged in with. The ~ in front of the account name indicates you are in the Users directory. To change to the root, after the $ symbol, if you type cd followed by a / you can then press ENTER and this should the view to:
Last login: Thu Jun 24 09:04:52 on ttys001
iMac:/ timgeers$
The slash after iMac: indicates you are now located at the root of the Mac, aka 'Macintosh HD' for your Mac.
If you now enter cd "My Ghostscript", this should change you to the Ghostscript folder. The last step is to then enter the command you tried previously (if this is what the document tells you to do). Note you should add the leading period before the slash
./espgs-8.15.4/configure ; exit;
If your Mac is correctly configured then you will be prompted to authenticate. However if your Mac does not have the C compiler installed, such as the GNU gcc which was part of the Developer Tools, then you may still get a message about no C compiler being present. Does the supporting documentation mention any prerequisites like having GCC?

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond I do not understand how a company like Apple puts experts to help users Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help?

My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help? Any other suggestions other than going to an Apple Store?

Back to life**
Oh I know there are many other vocabulary mistakes but never mind them I was just too excited when I wrote all of that while typing very quickly
P.S: if you have any question then ask and please do tell me if it works or not with u but I'm definitely sure it'll work so tell me this and we'll get excited together
Also if you have an experience to share then do share it as well please.
Peace

Problem in Application Help Configuration in Solution Manager

Hi Experts,
Here I facing one problem during Application Help configuration..
When I am going through application help for Solman Configuration it's taking me to standard erp help..
Where as in SR13, under PlainHtmlHttp,
In path tab I had given <b>saphelp_sm40/helpdata</b> for solution manager document.
But for other standard t-code it's giving actual application help.
where for SMSY,SOLAR01 etc i am not getting the application help.
Looking for advices.
Thanks & Regards,
Sumanta Chatterjee

Dear Sumanta,
This depends on how you want to (or how you can) use this http://help.
sap.com site.
At first you must be aware of the different areas on this site, these
areas have different URL structures, for example:
- http://help.sap.com/saphelp_erp2004 <<< for mySAP ERP
- http://help.sap.com/saphelp_47x200 <<< for R3 Enterprise
- http://help.sap.com/saphelp_nw04    <<< for SAP NetWeaver 04
- http://help.sap.com/saphelp_sm32    <<< for SAP Solution Manager 3.2
The main problem is that in the area "http://help.sap.com/saphelp_sm32"
there is only online documentation for the Solution Manager
functionality.
Can you please check the table SBAON_CCHK with transaction SE16.
The following record must exist:
MANDT COMPONENT                NAME_EN
xxx   ST                       Solar Help
If this record does not exist, please create this record manually.
This should help resolve the issue.
Regards
Amit

Hi dear my apple id has been disable what do i do please help me too enabel my apple id

hi dear my apple id has been disable what do i do please help me too enabel my apple id
all of my app downloded with this apple id and i'm just use this apple id for purches in clash of clans games plese help me

Read here:
http://support.apple.com/kb/ts2446

Please help me with this error: "Apple application support was not found... Error 2"

Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank you

iTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it.

HT200241 Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?

Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?

Did you follow the instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.
Also some microUSB leads don't seem to work - try another if you can. Disconnect superfluous USB device/hubs too if possible.
AC

Help! i have an apple id problem

Help! i have an apple id i created a while ago in Malaysia...so recently when i bought my iphone4s 16gb i used that account to purchase apps and all....later i realized that some feature is not available for me as my account is valid to purchases in Malaysia....but im currently in UK....WHAT SHOULD I DO NOW? CAN I CREATE A NEW ACCOUNT TO GET AND GET ALL THE APP I PURCHASED BACK?

You could re-purchase your old Apps with your new Apple ID account or you could switch back to the Malaysia iTunes Store and update your Apps with your old ID. You can't transfer Apps from one account to the other. Hope this helps.

Need Flash Help - configuring AIrtight Simple Viewer Pro

I need some help configuring the Airtight Interactive simple viewer pro, which requires flash. I am a complete beginner with flash, and I am reluctant to undertake the learning curve, though I am very tech saavy.
My ideal would be to locate someone who could do this FOR me, though resources are very limited for this project. Any suggestions of where I might connect with someone interested in doing this?
Alternately, I could undertake it myself, with someone qualified to coach me rather thouroughly through the whole process. That could be offline, or here where others could benefit from the thread. If someone offers this, I will post the precise details of what I need. The project is medium challenging, not extremely complex, but more than very basic.
Many Thanks.

Hi:
When you create the simpleviewer slideshow with iPhoto's plugin there should be a folder created on your HD that contains the items seen in the screenshot below:
The folder was named simpleviewer because that's what I named it during the export from iPhoto. That's the same folder as I refer to as "Slideshow folder". It can be whatever you name it when exporting from iPhoto. Upload that folder to your iDisk/Web/Sites folder as shown below:
In the iFrame code use the following URL to the index.html file inside the simpleviewer folder:
http://web.me.com/YourMMe_AccountName/simplerviewer/index.html
That should do it.

Is there anyone who can help me to contact the apple customer service? Because i want to know why they are diducted mt credit card more than the amount which is written on there apple store price? They are taken more!

Why the apple store taken more amount more than the amount written on their prices? Is there any one who can help me to contact the apple customer services. Thanks!

Some country's might not include tax in their prices, and if you changed or added your credit card details whilst making the purchase then a small temporary holding charge may also have been placed - in which case that should disappear within a few days (http://support.apple.com/kb/HT3702). Some apps also then allow you to make in-app purchases (though you can disable that via Settings > General > Restrictions)

HT2589 I created an id prior to having tech. assistance and now the non payment option is not available. How to I get past this stage? Help! Already frustrated with Apple.

I created an id prior to having tech. assistance and now the non payment option is not available. How to I get past this stage? Help! Already frustrated with Apple.

Already frustrated by jumping in and not getting some needed information before hand, hmm k
Create a new apple id - OR
create a new free web base email - sign into the apple id you have now edit the primary email address with the just newly created email save [you justs freed your email address from being an apple id]
Once you have all the4 correct information/data etc needed to be able to then chose option None
use that email to create apple id

Help configuring Mac Pro for Photoshop CS3

Hi all, this will be my 1st Mac and I'm hoping to get the proper configuration for using the Mac Pro with Photoshop CS3.
Since I'm working with large photos (20" X 24" and even larger) and layers my main concern is speed. The Apple store lists five items in their suggested configuration, any suggestions for what upgrades I need to make will be greatly appreciated!
Start building your Mac Pro with our suggested configuration:
* Two 2.66GHz Dual-Core Intel Xeon “Woodcrest” processors
* 1GB memory (667MHz DDR2 fully-buffered DIMM ECC)
* NVIDIA GeForce 7300 GT graphics with 256MB memory
* 250GB Serial ATA 3Gb/s 7200-rpm hard drive1
* 16x double-layer SuperDrive
thanks!!

Well, with a $US5K budget you should be able get a decent configuration. From the Apple Store I would order…
Mac Pro 2.66GHz 1GB RAM / 250GB HD
ATi Radeon X1900 XT
Apple 23" Cinema Display
Bluetooth & Airport Extreme
… which will cost $US3,726 leaving you plenty for your RAM and drives. I would add AppleCare although you can buy and activate this any time within your standard 1 year warranty period so by buy later you spread your costs.
Now, with RAM I would either buy 4 x 1GB (giving you 5GB and costing approx. $US400) from the manufacturer of your choice else 4 x 2GB (giving you 9GB and costing approx. $US850). The most cost effective is probably the 4 x 1GB as you'll most likely not want more than 8GB RAM in any case.
For your drives you have quite a bit of choice although you need to decide if you want to go RAID and what you're going to do with your backup and/or clone. Photoshop users require fast, small file, disk access which the Maxtor MaxLine Pro excels at and at $US99 each they're quite the bargain. Even though Seagate has chosen to discontinue this drive they're still the best boot/Photoshop drives in the 500GB size.
However, looking larger (750GB or more) such as the Hitachi Deskstar/UltraStar, Western Digital SE16/RE2 or Seagate Barracuda 7200.11/ES.2 You'll find better performance overall simply through their larger sizes. Not to mention you'll be buying current model drives. Be aware that you should buy drives specifically for RAID use if you wish to go that way. It's not a good idea to use desktop class drives in RAID sets hence the two model choices for each manufacturer.

Messages and Face Time stopped accepting Apple ID password

I'm running Mavericks with the latest update on iMac. Both Messages and FaceTime no longer accept my Apple ID password and therefore no longer work.
1. Reinstalled OS X from Recover mode.
2. Changed Apple ID password successfully
3. No issues with Messages and FaceTime on other devices, (MacBook Pro running Mavericks, next to last update, iPad mini, iPad, iPhone 4.)
Both before and after I successfully changed my Apple ID password, Messages brings up an error message that my Apple ID can't be used at this time and to contact support with the code 1598-4649-2012. When I call Support, the automated message says my iMac is out of warranty and I have to pay $59 for support.
Is there any other way to restore Messages and FaceTime which were working properly until around the time I updated Mavericks?

I'm having a similar problem.
Messages will not accept Apple ID and Password
Every time I try to use Messages on my MacBook Pro a window pops up asking for my Apple ID and Password. After entering my Apple ID and Password I keep getting a window
I can log In to iCloud, and iTunes with the same Apple ID and Password on my MacBook Pro, Mac Mini, & iPhone 5S. All are updated, OS X Mavericks 10.9.4on Macs & IOS 8 on iPhone and changed my password.

Help configuring AVR to accept Apple TV

Similar Messages

Maybe you are looking for