Help configuring dashboard editor to be read-only for shared dashboards

Hi,
Can someone help me configure my Oracle BI user group permissions so that...
my dashboard developers to be able to see the reports and prompts make up our shared dashboards (ie. use the "Page Options>Edit Dashboard..." menu option). But I'd like to stop them from being able to save changes to shared dashboards.
Thanks,
Darcy

Not quite.
I want my users to be able to use the "edit dashboard...." menu option so they can see the reports, prompts,... that make up the dashboard. My challenge is I don't want them to be able to use the "save" button and make changes to the dashboard though.
Darcy

Similar Messages

Can a Column in a Project Plan be set to Read Only for everyone except Admins

At my company the Project Server Admins create the initial project plans. We want to add a new column that will designate each task in the plan as Capital or Operational. We do not want anyone to have the ability to change these.
When the Project Managers need additional tasks on their plans they will need to copy an existing one in order to have this piece of information pre-populated on their new tasks, since we do not want them deciding what the task should be themselves and populating
the field as they create tasks.

In addition to Dale's excellent answer, I'd mention that it is possible to make a column "read-only" for certain security groups in MS Project Pro with VBA code.
That being said, I'd suggest to follow Dale's advice using a "soft" solution.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Howto make created folders/ files from one teacher, read only for other teachers?

Hello there,
as an admin @ school I was wondering how to make created folders/ files from one teacher, read only for other teachers?
- In a 2008domain, created a group "teachers"
- created a folder "teacher data" where all teachers have read/write permissions
ideal,a teacher who make's a folder in "teacher data" should be the only oen who is able to add file's to that folder and dele that folder or files. Other teachers may be able to read the content of the folder.
Is this possible to set up and how?
many thanks.
Nico.
rds

Hi Nico,
You could set the permissions below to resolve the issue:
For the root folder "teacher data": give the full control permission to CREATOR OWNER – "Subfolders and files only" and give the read/write permissions to the group "teachers"– "This folder only".
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Dynamically making read only for a field in get_data(CL_EHHSS_INC_BINFA_UI_FRM)

Hi Experts,
I am making read only for a field based on condition in get_data method of class CL_EHHSS_INC_BINFA_UI_FRM.
But it is not working. Pls find the code for the same.
LOOP AT CT_FIELD_USAGE INTO lw_field WHERE NAME = 'OC_INC_TYPE'.
   lw_field-read_only = ABAP_TRUE.
   MODIFY ct_field_usage FROM lw_field TRANSPORTING read_only.
   ev_field_usage_changed = 'X'.
ENDLOOP.
Pls help me what is wrong in this coding.
Regards,
Reny Richard

Hi Richard,
Please check if   this loop is executing for the correct desired event(say on click or from the start ). & the field name specified is correct or not through debugging. And check by placing the parameter ev_field_usage_changed = 'X'. after the loop statement.
Below is a sample code for making the field read only.
field-SYMBOLS: <fs_field> like line of CT_FIELD_USAGE.
   loop at CT_FIELD_USAGE ASSIGNING <FS_FIELD>.
     case <FS_FIELD>-NAME.
     when 'OC_INC_TYPE'. " name of the field
         <FS_FIELD>-READ_ONLY = 'X'.                " ' ' for editable
     ENDCASE.
CV_FIELD_USAGE_CHANGED = abap_true.
Regards,
Harsha

Possible to make an item editable for certain users and read only for other

Is it possible to make an item editable for certain users and read only for others?
I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?

Thank you, your suggestion worked.
It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.

How to make form field read only for users with certain permissions

We need to make two form fields read only for users with certain permissions. Kindly guide me on how to do this in Infopath. I searched and there is an option to disable to the column, but no option to select user permissions.
Please give your suggestion on this.
thanks.

Hi,
See the link below:
http://info.akgroup.com/blog-0/bid/69277/InfoPath-Restrict-visibility-to-users-in-a-SharePoint-Group
Here you can add the fomatting action on the field to disable the field if those users belong to certain Sharepoint group (does not matter the permission levels though). Hope it helps.
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

How to make a column as read only for update integrator.

Hi All,
i came across one issue while creating integrator.
for update integrator i have column rowid.rowid is a parameter. by using this(rowid) i'am updating.i want to make rowid column as read only .
if i enable read only for rowid,then it is passing null as parameter and inserting new row instead of updating the row.
If any one came across this problem you can help me in fixing this issue.

Hi Sanket,
Thanks for reply.
i have created a dummy column and passed the value of the orginal column values to dummy cloumn. and hided the orginal column.
in this process i have come across same issue. it is not passing the value as parameter and instead of updating the row it is inserting an new row.
Any alternate for this scenario.
Thanks in advance.

Lion administrator setting changed to read only for file sharing. Now hung machine

I was trying to network my Mac with a WIndows 7 machine and tried to have my name in the file sharing read write instead of other users such as administrator when I changed the administrator to read only for file sharing rights and could not add my name as a file sharing user with read write permissions Really silly move
I have performed a repair of disk permissions however still hung.
Whats worse is that my time machine for the last three days has been disconnecting when backing up leaving a partially complete backup. Backup failed. I also left a apple support community message a few days ago to solve it.
So its critical
Timely HELP is needed.

This same problem happened to me, all the sudden one day my mac decided to revert to the original standard root username and password which I obviously did not know. In order to change this:
1) Activate single user mode on reboot as by pressing cmd + s as your computer starts up. Make sure you do it right away, and keep the keys pressed down.
2) Where the cursor pops up, type exactly
+/sbin/mount - uw/+
3) When the next cursor pops up type exactly
passwd
4) Then you can type any password you want (now changing the root password to be what you want)
Note you will not be able to see what you type, but the text is being recognized
5)The computer asks for you to retype the password, retype it
6) Type reboot
Once the computer restarts you can navigate to system preferences>accounts> and then unlock the account (lock is located on the bottom left corner) using Username: root and the password you just set. Henceforth, you can appoint your account as the administrator. Hope it works!

All USB drives mount as read only for user

I have searched a bunch and thee results I find seem to be irrelevant to my situation. Most relate to a single USB media that is a problem and won't read or write.
On a new Arch install on a new computer (my third base system install). Running Gnome.
All USB mass storage devices mount as read only for the logged in user. Root has write permissions and I can mkdir no problem. It is not an issue with the USB drive itself as this occurs with multiple USB media (I've tested several SD cards on a reader and at least two drives, all the media works correctly on my existing installations)
I'm posting the contents of my /etc/group file in case there's an obvious error there I don't see, and my dmesg output upon plugging in the drive. User name is changed in the group file posted to "archie"
This is a single-user system.
/ect/group
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin
adm:x:4:root,daemon
tty:x:5:
disk:x:6:root
lp:x:7:daemon
mem:x:8:
kmem:x:9:
wheel:x:10:root,archie
ftp:x:11:
mail:x:12:
uucp:x:14:archie
log:x:19:root
utmp:x:20:
locate:x:21:
rfkill:x:24:
smmsp:x:25:
http:x:33:
games:x:50:
lock:x:54:
uuidd:x:68:
dbus:x:81:
network:x:90:
video:x:91:
audio:x:92:
optical:x:93:
floppy:x:94:
storage:x:95:
scanner:x:96:
power:x:98:
nobody:x:99:
users:x:100:archie
systemd-journal:x:190:
archie:x:1000:
avahi:x:84:
polkitd:x:102:
rtkit:x:133:
gdm:x:120:
brlapi:x:999:
kvm:x:78:
ntp:x:87:archie
dmesg output
[ 968.044188] usb 4-3: new high-speed USB device number 4 using ehci-pci
[ 968.170628] usb-storage 4-3:1.0: USB Mass Storage device detected
[ 968.171435] scsi7 : usb-storage 4-3:1.0
[ 969.174450] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 969.175068] scsi 7:0:0:1: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 969.939417] sd 7:0:0:0: [sdb] 15572992 512-byte logical blocks: (7.97 GB/7.42 GiB)
[ 969.941028] sd 7:0:0:0: [sdb] Write Protect is off
[ 969.941037] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 969.944664] sd 7:0:0:1: [sdc] Attached SCSI removable disk
[ 969.945509] sd 7:0:0:0: [sdb] No Caching mode page found
[ 969.945517] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 969.952682] sd 7:0:0:0: [sdb] No Caching mode page found
[ 969.952693] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 969.956396] sdb: sdb1
[ 969.965003] sd 7:0:0:0: [sdb] No Caching mode page found
[ 969.965011] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 969.965015] sd 7:0:0:0: [sdb] Attached SCSI removable disk
I'm sure I'm just missing something in user management, but I can't find what.
Last edited by hooya (2014-04-27 03:10:49)

I am also having the same problem. Root can read and write to automounted drives, but my user cannot. I've tried with a variety of drives, I am assuming they are being automounted by root instead of the logged-in user somehow. (I am running x directly, and am not using a display manager, if that has anything to do with it).
When I look at how it is mounted it is as follows:
/dev/sdc1 on /run/media/myuser/drivename type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2)

Make UDF Read-only for all users

Hi
Can i use any script to make a UDF read-only for all users?
i am looking at CPRF and CUFD Tables
thanks

Hi,
You should never try updating system table directly. That will against supporting policy by SAP.
Thanks,
Gordon

Read Only for "Group" and "Others" via SMB

I see when Windows vista users of my OS X 10.5.8 server save a file to the server, the permissions show on the server as Read & Write for the owner and Read Only for 'Group' and 'Others'.
Is there a way I can make the OS X server always make 'Group' and 'Others' always be Read & Write?
Thanks!

It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
1 Display=Yes, Return=Y
2 Display=No, Return=N
The settings in the LOV section on the item iteself:
Named LOV: LOV_YN
Display Extra values: No Dynamic translation: Not translated
Number of columns: 2 Display null: No
Null display value is blank as is null return value
Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
Rgds/Mark M.

MY Hard Drive says_"YOU CAN READ ONLY" for the OWNERSHIP AND PERMISSSIONS!

I cannot add anything to my EXTERNAL (SimpleDrivePS) hard drive. When I try to copy something to it, it says "The item cannot be moved because SimpleDrivePS cannot be modified."
Upon control-clicking this external hard drive's icon, under "Get info" it says "You can read only" for it's "Ownership and Permissions."
I have used this hard drive with Windows-based computers, but not with this new Apple yet.
What do I need to do so that I can move or copy things to this external hard drive?
Also, is there a discussion room for just general questions? - There are many little things that I wonder how to do from time to time as I am trying to become accustomed with Apple, like shortcut key for desktop, or where is control panel or link to "my computer" or other shortcut keys - things like that.

Hi newsppler;
Since I have never had a disk that was formatted NTFS, I am not absolutely sure exactly how you can discover how it is formatted. I think if you look at the disk with Disk Utility that should tell you.
Yes. If you reformat you will lose everything that is currently on that disk.
To reformat open Disk Utility and then select the disk. You then click the partition tab. This will allow you to select what format you wish to use. I would suggest Mac OS Extended +
Allan

How to make the OAF page Read-Only for one Responsibility?

I have a requirement to make the entire OAF page to Read-only for particular Responsibility.
Is there any direct option to make page Read-only ?
Can anyone suggest some solution?

Hi,
Check one article on
http://www.applikast.net/technical/oa-fwk/misc/making-an-oa-framework-page-readonly
or you can do Personalization for each item on page.
Thanks,
Abhi

Urgent :need help to setup Master to snapshot(read only) environement

Hi,
I need your help urgently. I don't know much about master to Snapshot configuration. I need to do prototype of master to snapshot(read only) as soon as possible. I need replication setup/configuration scripts.
DB1 is master database (8i) and DB1 is Snapshot site db.
both dbs are identical except they have different Global_name.
I want to replicate table from DB1---> DB2 unidirectional.
Global name for DB1 is DB1.world and for DB2 is DB2.world
TNS names are DB1 and DB2 respectively and TNSNAMES.ORA file is same on both server.
Schema owner of Mster site (who owns the tables that I want to replicate) is user 'SYNAPSE'. On DB2 I have also same schema with same tables. Lets say table called 'TEST' that I want to replicate from DB1 to DB2.
for simplicity I want to have only one account(user) on both site who can do administration and take care of all other task including replication.
I need scripts to do setup for the replication environment described above.
In short please provide me script to replicate DB1 to DB2 (Master to snapshot).
I appreciate your help very much.
You can reach me at [email protected] as well.
Thank you.
Pravin

Finally I figured out how to setup/configure master to Snapshot environment but I have to say that Oracle documents are very confusing.
The problems I ran into are:
User Repadamin can't create MV in schema owner other than repadmin. Work arround I used is let that schemema owner allow to create MV.
Other proble ran in is Constraint(FK) violation when trying to do using refresh group. To resolve this problem either disable constraints on snapshot site or create constraints usinf deferred option.
Pravin

Editor stuck in read only mode

Am able to connect to a 9i database, but am unable to edit any code. Logon appears successful, connection made, and am able to query the database. However, when I open stored procedures for editing, the edit window doesn't respond to any keystrokes.
The editor behaves as though I were in some kind of read-only mode. However, when I exit the procedure, I am prompted to save "changes".
James Brockman

Logged this as a SR on Metalink and the problem seems to be down to use of colons in my connection names.
I was using a naming convention of
host:SID for accounts connecting as system and
host:SID:schema for accounts connecting as specific schema
Which nicely groups and orders my connections by host. Sadly this prevents edit of stored pl/sql units (package, procedures, functions)

Help configuring dashboard editor to be read-only for shared dashboards

Similar Messages

Maybe you are looking for