Help configuring OS X Server for use with SuperDuper!

Hi, I am trying to configure my Mac Mini running Mavericks and OS X Server and my MBP so that I can make SuperDuper! backups from the internal drive in the MBP to an external drive connected to the Mac Mini. I would like to be able to make a connection wirelessly over the LAN so that I can configure automatic scheduled backups. Can anyone help me with this? I am inexperienced with Server and have not been able to get SuperDuper to locate the external drive. Any help would be greatly appreciated. Thanks!

You can't do that. "SuperDuper" doesn't work over a network. "Carbon Copy Cloner" does.

Similar Messages

Problem-Starting InDesign Server for use with CORBA / Java and IOR file not generated

I'm trying to start Indesign Server cs3 for use with Corba, as per the document the server should generate the start-up message like this..
InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
[server] Writing IOR to ... and it should generate the IOR file
but I'm getting the usual start-up message and the IOR file is not generated, I hope IOR file is required for Java component interaction with IDS, kindly help me to solve this.
Thanks in advance.

[From Susan Doan, who is having trouble posting to the forum today}:
It looks like the example command line in the "Intro to InDesign Server" pdf is using curly quotes instead of straight quotes. If you copy the command from the pdf and paste it in your command shell, it won't work because of the curly quotes.
You can run the command without the quotes as Rich has said, but, as will all command lines, if your path contains a space, you will need to put quotes (straight ones!) around the path.
Thanks,
Ole

Cannot configure wrt54gs v6 router for use with filezilla FTP client

I am new to working with FTP and very rusty on networking in general. I just downloaded filezilla to create a FTP client on my desktop. When I run their wizard, it says the connection is tainted by my router. All the forums for filezilla say I need to configure my router to allow traffic on either port 21 (ftp) or a range of ports ( they suggest 50000 to 50100).
Please let me know what I need to do to make this work
thanks in advance
ldygunner

To answer your other questions, the tutorials have it all wrong. What they really need to explain, but fail to do so, is that the only situation where a FTP client would need to use active mode (the PORT command) is where the FTP server can't accept inbound connections on arbitrary port numbers. But that's a pathological case anyway: the FTP server can always accept connections on some well defined set of port numbers, to keep its own local firewall or NAT router happy. Consequently, there is really no need at all for a FTP client system to open up any ports to support active mode, rather than always operate in passive mode (as browsers do.)
The fact of the matter is that if passive mode works in a browser for you, it will work for Filezilla also.
And the configuration tests it runs are brain damaged. Even though the wizard recommends passive mode, it never tests for it. And it doesn't really test active mode either. What it really tests is whether anything between the client and the server is "transparently" translating IP addresses and port numbers. Such a test is broken, because the mere fact of port numbers being rewritten in TCP packets is irrelevant to whether PORT (active mode) will succeed or fail.
For completeness, in case someone decides to get pedantic, there is a case where a FTP client system would need the active mode PORT command to work, but that case is now of historical interest only. It's a scenario that FTP servers no longer support, for security reasons. (What is it? When the FTP client is operating as a controller to remotely transfer files between two servers: it tells one server to use passive mode, and sends the address/port it gets to the other server in active mode, which in theory would make the second server open a connection to the first. This, in fact, is why two modes, active and passive, were originally defined in the FTP standard!) And it still wouldn't need open ports on the client system.
Message Edited by arayq2 on 10-19-2008 09:12 PM

Where to locate HTTP Server for use with Oracle Express 10g and Apex?

Hello,
Im a newbie and I downloaded oracle express 10g and Apex 3.2.1. The Apex install is referencing "choosing a HTTP Server" specifically "Oracle HTTP Server and mod_plsql and the embedded PL/SQL Gateway". My question is do the HTTP server or PL SQL embedded Gateway come with the 10g install or do I need to download them seperately? If so where can I locate them?
Thank you!

user12027813 wrote:
If using Oracle XE, then which APEX install scenario would I used if I downloaded both the XE and apex from the OTN?Oracle XE includes APEX 2.1 and uses the PL/SQL Gateway for HTTP service work. No separate HTTP Server is required.
If, after you install XE, you want to upgrade to APEX 3.x, you would select the PL/SQL Gateway for the upgrade.
If the PL/SQL Gateway (EPG) does not provide the full set of services you need, you could put a regular Apache in front and redirect to APEX for those specific issues.
If that is to complicated, then you could license Oracle Application Server Standard Edition 1 (for a fee) to get an Oracle HTTP Server and it's mod_plsql to replace the internal EPG.

Help installing Allegro in Arch for use with Code::Blocks

I've tried to find the solution to my problem on the code::blocks wiki and the allegro sites and even on the ubuntu forums, but to no avail. I've installed Allegro from AUR and I've linked the libraries in codeblocks like this:
'allegro-config --libs'
But when I run an allegro .c or .cpp file this happens:
obj/Debug/main.o||In function `main':|
/home/glenn/Desktop/testing/main.c|3|undefined reference to `_install_allegro_version_check'|
/home/glenn/Desktop/testing/main.c|4|undefined reference to `set_gfx_mode'|
/home/glenn/Desktop/testing/main.c|5|undefined reference to `install_keyboard'|
/home/glenn/Desktop/testing/main.c|6|undefined reference to `font'|
/home/glenn/Desktop/testing/main.c|6|undefined reference to `screen'|
/home/glenn/Desktop/testing/main.c|6|undefined reference to `textout_ex'|
/home/glenn/Desktop/testing/main.c|7|undefined reference to `key'|
/home/glenn/Desktop/testing/main.c|8|undefined reference to `allegro_exit'|
||=== Build finished: 8 errors, 0 warnings ===|
Key words: undefined reference. I think this may have something to do with improper linking or something. But I'm a noob and I need help.

Well, I just got back from the Allegro IRC room and it turns out that
'allegro-config --libs'
is incorrect. It's actually:
`allegro-config --libs`
Forgive me for not noticing!
The problem is fixed.
Last edited by ac3raven (2010-02-26 05:51:30)

Configuring Cisco Router for use with Syslog Server

Configuring Cisco Router for use with Syslog Server:
Does anyone know of a good doc for this?
-Ashley

Start with that one: http://security-planet.de/wp-content/uploads/2008/12/logging-ios.pdf
And if you need more informations, just ask what you want to achieve.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Doesn't play songs, "itunes is not configured for use with mac-formatted"??

Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
Thanks for any thoughts!

Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
If there is anyone out there that can help please do!
Windows XP

Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOA

Can anyone help figure out why the Catalyst 6509 is not able to assign an IPv6 address? Thank you.
Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOADDRS-AVAIL(2). My configuration on the 6500 for the DHCPv6 server is:
ipv6 dhcp database disk0://DHCPV6-DB
ipv6 dhcp pool VLAN206IPV6
prefix-delegation pool VLAN206IPV6-POOL
dns-server 2620:B700:0:1001::53
domain-name global.bio.com
ipv6 local pool VLAN206IPV6-POOL 2620:B700:0:12C7::/65 65
interface Vlan206
description *** IPv6 Subnet ***
ip address 10.2.104.2 255.255.255.0
ipv6 address 2620:B700:0:12C7::2/64
ipv6 nd prefix 2620:B700:0:12C7::/64 14400 14400 no-autoconfig
ipv6 nd managed-config-flag
ipv6 dhcp server VLAN206IPV6
standby version 2
standby 0 ip 10.2.104.1
standby 0 preempt
standby 6 ipv6 2620:B700:0:12C7::1/64
standby 6 preempt
I'm getting a result from my debug as follows:
Apr 10 16:28:02.873 PDT: %LINK-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.873 PDT: %LINK-SP-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.877 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Received SOLICIT from FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: dst FF02::1:2
Apr 10 16:28:03.861 PDT: type SOLICIT(1), xid 8277025
Apr 10 16:28:03.861 PDT: option ELAPSED-TIME(8), len 2
Apr 10 16:28:03.861 PDT: elapsed-time 101
Apr 10 16:28:03.861 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.861 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.861 PDT: option IA-NA(3), len 12
Apr 10 16:28:03.861 PDT: IAID 0x0FF01FAF, T1 0, T2 0
Apr 10 16:28:03.861 PDT: option UNKNOWN(39), len 32
Apr 10 16:28:03.861 PDT: option VENDOR-CLASS(16), len 14
Apr 10 16:28:03.861 PDT: option ORO(6), len 8
Apr 10 16:28:03.861 PDT: DOMAIN-LIST,DNS-SERVERS,VENDOR-OPTS,UNKNOWN
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Option IA-NA(3) is not supported yet
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Sending ADVERTISE to FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::21D:E6FF:FEE4:4400
Apr 10 16:28:03.861 PDT: dst FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: type ADVERTISE(2), xid 8277025
Apr 10 16:28:03.861 PDT: option SERVERID(2), len 10
Apr 10 16:28:03.865 PDT: 00030001001DE6E44400
Apr 10 16:28:03.865 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.865 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.865 PDT: option STATUS-CODE(13), len 15
Apr 10 16:28:03.865 PDT: status code NOADDRS-AVAIL(2)
Apr 10 16:28:03.865 PDT: status message: NOADDRS-AVAIL

Hello,
maybe hitting the following bug.
Pv6 Address Assignment Support for IPv6 DHCP Server
CSCse81385
Hope this helps

This driver is locked for use with embedded applications - SQL Server

Hello guys,
Background:
I developed an application using JSC2 with MS SQL Server 2000 as the database and Sun Application Server PE 8 as App Server. During development, I am able to deploy and test it. But as soon as I've installed Sun Application Server PE 8 on our Production Server, exported my app there and tried to execute it, I get the error
"This driver is locked for use with embedded applications".
I just wanna ask, though I've seen other threads saying that the only solution is to buy the EE or SE of Sun App Server, isn't there really any work-around with this?
Thanks very much for your help.

OK, that is the same setup we have (Creator built application running with MS SQL Server).
I wrote a tutorial talking about integrating Creator with Spring. In it you will find out how to use SQL Server with a Creator built app running on the Platform Edition. That tutorial can be found here: http://swforum.sun.com/jive/thread.jspa?threadID=52657&tstart=15
In short, look to jTds.
Hope this helps.

Where do I download a Windows Server 2012 R2 .iso from, for use with Hyper-v?

Hello,
Where do I download a Windows Server 2012 R2 Standard .iso from, for use with Hyper-v?
The only official download I can find is the evaluation version from here:
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-r2
Is it recommended to use the evaluation version and then license it to make it a full version, or is there a better official download?
Thanks
Paul

Hi Brian,
I don't personally have an MSDN subscription.
So using the evaluation versions is ok?
With a Windows Server 2012 R2 license, you can have two
Windows Server 2012 R2 virtual
machines, so I assume I can turn evaluation version VMs into full fledged servers?
Thanks
Paul
How did you acquire a Server 2012 R2 license without any installation media? Can you get the installation media from the same source? How did you install 2012 R2 on the host?
Bill

Is there a plan to update Configurator for use with InDesign CC?

Hi all,
When will Configurator be available for use with InDesign CC... Is there a plan to update it in the near future to be compatible with ID CC?
Thank you so much:)
Christine

shane.daley wrote:
I have recently purchased an iPad Air 2 and to increase useability purchased a Logitech +type bluetooth keyboard. I'm very happy with both but disappointed in the lack of autocorrect function between the bluetooth keyboards (not a logitech deficiancy) and iOS.
Is there a plan to fix this please?!
Is that because you also ask the same question to Logitech and that was their response, since you're using a 3rd party software

Configuration of XSQL for use with non-Oracle dbs

If anyone has positive experiences with configuring XSQL for use with non Oracle databases I'd like to hear how they did it, see tutorials, configuration files, etc.
Specifically setting up to use MySQL or Postgresql on Linux/FreeBSD would be very interesting.
Also, does anyone use this without setting mime types? How would you go about this so you could point to the relevant servlets in the page?
Josh

I don't understand how setting up for Non-Oracle DB's is related to not setting up the servlet as an extension-mapped servlet.
It might work, but would you run JSP's
that way? XSQL behaves very similiarly
inside to how a JSP runner works, which
wants to be servlet-mapped.
However, OAS 4.0.8.1 does not support
extension mapping and XSQL works there
so i'm assuming it would work on other
servers set up that way. It's not
a configuration we test/certify.
null

Help with taffybar installation for use with xmonad

I discovered nice project https://github.com/travitch/taffybar recently. It's another statusbar like xmobar or dzen2 intended for using with xmonad. It integrates with the latter using dbus instead of stdin.
Anyone had successful experience installing and running it?
I installed taffybar with cabal (cabal install gtk2hs-buildtools taffybar). But I totally confused with dbus integration. I have dbus daemon in my rc.conf, but taffybar raises the error on start: Connection Error "connectSession: DBUS_SESSION_BUS_ADDRESS is missing or invalid.". Than I tried to add eval `dbus-launch --auto-syntax` to my .xinitrc (as suggested in installation instructions http://pages.cs.wisc.edu/~travitch/taff … ybar.html), but it taffybar freezes on start. I hope someone more experienced will help me with it.

The solution was simple. I should just add dbus-launch at the bottom of the .xinirc:
exec ck-launch-session dbus-launch bash -c "taffybar & xmonad"
Topic can be marked as solved.

Creative Zen Micro Photo not tested for use with Windows so cant install it! Please help

Heya! Basically when installing the software for Microphoto it stops saying that as my device hasn't been tested for use with windows it cant install for fear of corrupting my laptop! Can anyone help me overcome this because i installed it aagges ago and it let me have the option of continuing the installating, but i had 2 uninstall it and upon reinstalling it it does not give me the option to continue. It just cancels the installation. Can someone please help me as this is driving me nuts!! Y is it that technology is continuosly mucking up grrrrr!
Lucy

Are you runnning Win XP SP2? If so, this is a standard warning about unsigned drivers, but it should still give you the option to "continue anyway" to complete the installation.
Also, make sure you have Windows Media Player 0, as this is needed for Windows XP (drivers) to recognize your MicroPhoto.

Pls help on error on ereader "this document is protected by DRM ( adobe digital rights management ) and is not currently authorized for use with your adobe id

how do i solve this in order for the e reader to open the file?“this document is protected by DRM ( adobe digital rights management ) and is not currently authorized for use with your adobe id
thnaks

This is something you will need to talk to the publisher of the document. They might have to do something to allow you to open the file. (If you changed Adobe ID since buying the file, for instance, they might have to allow for that).

Help configuring OS X Server for use with SuperDuper!

Similar Messages

Maybe you are looking for