Help configuring ports 3283 5900 on client and administrator for ARD

Hello:
I think I'm understanding the concept of configuring these ports to be opened so that I may use ARD over the internet. I'm sure any Apple Techhead would know where to find these and how to change them, but unfortunately I'm not one of those techheads. . . can anyone suggest where I find them and how to open those ports up?
G5   Mac OS X (10.4.2)  

It depends where you want to open them. If you have the Mac firewall turned on go to the Sharing Prefs and enable ARD in the Firewall settings. If you are behind a router, you may need to alter the NAT settings to allow access.If you have Netbarrier installed you may need to create a custom set allowing ARD across the internet (both UDP and TCP protocols).

Similar Messages

  • Configure port channel between IO Module and FI

                       Hi,
    I have the current setup
    UCS chassis (4 uplinks) --> FI --> (Port channel) --> N5K --> (port channel) --> VSS 6500
    I configure port channel between IO Module and the FI by changing to policy to "Port Channel" and set the link to 4
    FI has created a portchannel under "Internal" containing all the FI interfaces that are connected to the IO module.
    I have installed ESXI on a blade but i was unable to reach it, even the esx was unable to ping the gateway.
    VLAN tagging is enabled from the ESX server.
    I have issued the command "show mac address-table | inc <mac address of the vnic assigned from thre service profile> on both the N5K and thr 6500 and the mac is there.
    I have allowed all the vlans on the vNIC from the service profile.
    am I missing anything?
    thanks

    Hello,
    Can you please check whether your ESXi vmkernel interface ip address learned on right VLAN on FI / upstream switch or not.
    connect nxos
    show mac-address-table | inc 
    Padma

  • How to configure full tunnel with VPN client and router?

    I know the concept of split tunnel....Is it possibe to configure vpn client and router full tunnel or instead of router ASA? I know filter options in concentrators is teher options in ISR routers or ASA?

    I think it is possible. Following links may help you
    http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080819289.shtml

  • Help configuring Audition with Virtual  Audio Cable and Skype

    I'm using the latest version of Audition, along with Virtual Audio Cable and Skype for my PC (Windows 7).  While I'm able to properly configure my own microphone (Edirol UA-25), to be captured by Audition on track 1, I can't seem to get track 2 configured properly to capture and record.
    I seem to be missing a step.
    Is there anyone that can help me properly configure or offer an alternative that will allow me to record my microphone and the Skype call on two separate tracks?
    Thanks in advance for your expertise!

    Others may have made it work but I've never persuaded Audition to record a mic in one channel and line out (Skype) in the other.  Since Audition it designed to work with a single ASIO audio interface, this makes sense.
    My solution is to use a little utility called the iFree Skype recorder:  Record Skype Calls with iFree Skype Recorder - Your FREE Skype call recorder software
    It works well for me, keeping the outgoing part of the call and the incoming separate for easy editing later.  It works fine with an external audio interface and good mic as long as Skype is set up to work that way.
    The only drawback is that it records in MP3 not wave but, given the quality of most Skype calls, this isn't really a deal breaker.

  • Email client and calender for StarOffice

    Just purchased StarOffice 8. Was puzzled to discover that there was no email client and calender, as there was in Star Office 5. What to do, what email client and calender shall I use? Is Sun recommending Thunderbird, or anything else? How do I get it?

    Thanks to the folks at the Microsoft Outlook for Mac Community who solved my problem!
    While I am unsure what causes this problem, once I added the user who is receiving spam from me to my Macbook Address Book App, then emails sent using whichever mail client are no longer tagged as spam.
    To me this points to a Mac/OS X problem because both email clients - Outlook for Mac and Apple Mac Mail have the same challenge, regardless of the email delivery method used- Exchange or POP.
    Shame on the rude folks at the Apple Support line who told me to reinstall the OS before anything else.

  • Please help me to find the sample code and schema for GetDBDateTime.zip fil

    Please help me to find the GetDBDateTime.zip and Guest_Book.zip files.
    Tks!

    Does this Help?
    http://www.oracle.com/technology/sample_code/products/ias/files/psp/GetDBDateTime/Readme.html
    Did you install Oracle9iAS ?

  • I need help with 845 pro MS-6529 Mainboard and drivers for sound!! PLZ HELP

    I have a 845 Pro MS-6529 Mainboard and i recently just scrubbed my computer and reinstalled windows ME. But i need to re-install the driver for sound because i can't hear anything    but when i downloaded it , the files did not work and i've tried redownloading and etc and any other way possible the computer says there is no new driver software on the computer for it. I could swear though that it seems like the download is missing a file or something? could someone possibly download the software quickly for windows ME 845 Pro MS-6529 Mainboard sound driver and check for me in any way? i would b greattttlyyyy thankfull to anyone who could help!!! thanx!

    Hi,
    On-Board sound is enabled in bios?????
    Also, you will need to update Direct-X for all features too work........
    Del

  • Please help me :How to set the width and height for my View page "test.htm"

    Hi,
        I have controller class. When i call the view[test.htm]from this controller class ,i am getting the view with output tableview..it is fine.
    My requirement:
                 the output view window is showing full browser window. I want the view output like showModeldialog. I want to set the width and height for the output view window. How is possible?
                 or
    i want to call the test.view in the window.showModelDialog..
    Please help me .. Urgent requirement.

    Yes you can set the width & Height of the view as follows..
    <div style="width:580px; height:750px; margin-top:15px; overflow:auto;">
    <htmb:form......>
    </htmlb:form>
    </div>
    <i>*Reward each useful answer</i>
    Raja T

  • Help in identifying best available development framework and language for native app development for Windows and mac osx desktops through single code base

    Hi Guys
    i am try to identify the right development framework and technology for developing GUI application which can run on windows and mac osx. 
    i am sure that there will be specific handling for both of these os, but at the same time there could lot of code can be same.
    is it possible to fulfill requirements of both these OS's through single code base. As of now i am more experienced with Dotnet C# on windows.
    Regards
    Mukesh Vashisth

    Just wanted to quickly confirm
    before i dive into xamarian.
    Is Xamerian can be Used to build applications for MAC and Windows PC along with mobile devices.

  • Configure PIX to use both TACACS and RADIUS for VPN

    PIX 506E using ver 6.3: Whenever I add the command "crypto map mymap client authentication PARTNERAUTH" it removes the current TACACS+ client authentication. I need to have both until I've finished testing the radius server. Can I add an additional crypto map designation command to accomodate and use both the current TACACS+ (ACS) and RADIUS?

    Hi,
    Unfortunately what you want to do cannot be done on the pix, let's say that you have
    multiple vpn groups on your firewall, as soon as you apply the following command:
    crypto map mymap client authentication partnerauth
    where parnerauth can a radius, tacacs, tacacs+ or an ACS server:
    aaa-server partnerauth protocol radius
    aaa-server partnerauth (inside) host 172.18.124.196 cisco123
    As soon as you use "crypto map mymap client authentication partnerauth" the authentication
    is applied globally on the crytpmap, thus affecting all the vpn groups configured.
    You can have multiple vpn groups running on your firewall (dynamic crypto maps) but you
    need to associate them to a static crypto map ( crypto dynamic-map dynmap 10 set
    transform-set myset).
    You can only have 1 crypto map applied to one interface, when you apply this line:
    "crypto map mymap client authentication partnerauth"
    The authentication is applied to ALL the clients, we cannot separate the extended
    authentication based on the vpn group or ip address.
    Please rate if that helps !
    Regards,
    ~JG

  • Oracle instant Client and unixODBC for Linux has Error

    Hi experts,
    I have two Redhat EL 5. On the first Rehat(xxx.xxx.xxx.121 --> called Redhat1) I have installed Oracle 10g database server. On the second Redhat(xxx.xxx.xxx.123 --> called Redhat2) I want to connect to Oracle database server on xxx.xxx.xxx.121 via ODBC. But it does not work. Pls help me!
    I have done steps as following:
    Login to Redhat2 as root and type commands:
    1)Install Instant Client + sqlplus
    # rpm -ivh oracle-instantclient-basic-10.2.0.4-1.i386.rpm
    # rpm -ivh oracle-instantclient-sqlplus-10.2.0.4-1.i386.rpm
    2)Setting environment variable
    # LD_LIBRARY_PATH=/usr/lib/oracle/10.2.0.4/client/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
    # SQLPATH=/usr/lib/oracle/10.2.0.4/client/lib:${SQLPATH}; export SQLPATH
    3)Testing connection to Redhat1(Oracle DB server) using sqlplus
    # sqlplus abc/[email protected]:1521/lab2
    Connected.
    5)Begin to install unixODBC
    # rpm -ivh oracle-instantclient-odbc-10.2.0.4-1.i386.rpm
    # rpm -ivh unixODBC-2.2.11-7.1.i386.rpm
    # rpm -ivh unixODBC-devel-2.2.11-7.1.i386.rpm
    # rpm -ivh unixODBC-kde-2.2.11-7.1.i386.rpm
    6)After installation above packages I check for existing of odbc.ini and odbcinst.ini in /etc --> ok
    # ls /etc | grep odbc
    odbc.ini
    odbcinst.ini
    7) Tar unixODBC-2.2.14-linux-x86-32.tar.gz and copy file to /usr/local/bin, /usr/local/include, /usr/local/lib
    # tar -xzf unixODBC-2.2.14-linux-x86-32.tar.gz
    # ls /usr/local/bin/
    dltest isql iusql odbc_config odbcinst
    # ls /usr/local/include
    autotest.h odbcinstext.h odbcinst.h sqlext.h sql.h sqltypes.h sqlucode.h unixodbc_conf.h uodbc_extras.h uodbc_stats.h
    # ls /usr/local/lib
    libboundparam.la libgtrtst.la libodbccr.la libodbcinst.la libodbc.la
    libboundparam.so libgtrtst.so libodbccr.so libodbcinst.so libodbc.so
    libboundparam.so.1 libgtrtst.so.1 libodbccr.so.1 libodbcinst.so.1 libodbc.so.1
    libboundparam.so.1.0.0 libgtrtst.so.1.0.0 libodbccr.so.1.0.0 libodbcinst.so.1.0.0 libodbc.so.1.0.0
    # NLS_LANG=AMERICAN_AMERICA.UTF8; export NLS_LANG
    # TNS_ADMIN=/root; export TNS_ADMIN
    # ODBCINI=/etc/odbc.ini; export ODBCINI
    7)Retest sqlplus to Redhad1(Oracle database server) with local tnsname
    # sqlplus vonphoto/vonphoto@lab2
    SQL*Plus: Release 10.2.0.4.0 - Production on Sat Mar 27 03:20:55 2010
    Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    8) Edit odbc.ini and odbcinst.ini
    ---odbcinst.ini
    # Included in the unixODBC package
    [Oracle 10g ODBC driver]
    Description = Oracle ODBC driver for Oracle 10g
    Driver = /usr/lib/oracle/10.2.0.4/client/lib/libsqora.so.10.1
    Setup =
    FileUsage =
    CPTimeout =
    CPReuse =
    ---odbc.ini
    [ora_dns]
    Driver = Oracle 10g ODBC driver
    DSN = ora_dns
    ServerName = xxx.xxx.xxx.121
    UserID = vonphoto
    Application Attributes = T
    Attributes = W
    BatchAutocommitMode = IfAllSuccessful
    BindAsFLOAT = F
    CloseCursor = F
    DisableDPM = F
    DisableMTS = T
    EXECSchemaOpt =
    EXECSyntax = T
    Failover = T
    FailoverDelay = 10
    FailoverRetryCount = 10
    FetchBufferSize = 64000
    ForceWCHAR = F
    Lobs = T
    Longs = T
    MetadataIdDefault = F
    QueryTimeout = T
    ResultSets = T
    SQLGetData extensions = F
    Translation DLL =
    Translation Option = 0
    DisableRULEHint = T
    TraceFile = /backup/sql.log
    Trace = Yes
    9)Testing the driver and the data source
    # odbcinst -q -d
    [Oracle 10g ODBC driver]
    # odbcinst -q -s
    [ora_dns]
    10) Test connection via ODBC from Redhat2(xxx.xxx.xxx.123) to Redhat1(xxx.xxx.xxx.121)
    # isql -v ora_dns
    isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directory
    I have spent 4 days to search on the internet. But it still error.
    Pls help me.

    Apologies - thought it was a database to database connection that you were trying to create.
    isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directoryThe readline library is in package readline-4.3-13 on RHEL4 and in readline-5.1-1.1 for RHEL5 on my servers (minor version number are of course dependent on the kernel version used).
    This is also not an ODBC or Oracle issue. It seems that isql is using rlwrap or similar - this requires the readline library. And possibly LD_LIBRARY_PATH to be set too.

  • Oracle instant Client and unixODBC for Linux not work

    Hi experts,
    I have two Redhat EL 5. On the first Rehat(xxx.xxx.xxx.121 --> called Redhat1) I have installed Oracle 10g database server. On the second Redhat(xxx.xxx.xxx.123 --> called Redhat2) I want to connect to Oracle database server on xxx.xxx.xxx.121 via ODBC. But it does not work. Pls help me!
    I have done steps as following:
    Login to Redhat2 as root and type commands:
    1)Install Instant Client + sqlplus
    # rpm -ivh oracle-instantclient-basic-10.2.0.4-1.i386.rpm
    # rpm -ivh oracle-instantclient-sqlplus-10.2.0.4-1.i386.rpm
    2)Setting environment variable
    # LD_LIBRARY_PATH=/usr/lib/oracle/10.2.0.4/client/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
    # SQLPATH=/usr/lib/oracle/10.2.0.4/client/lib:${SQLPATH}; export SQLPATH
    3)Testing connection to Redhat1(Oracle DB server) using sqlplus
    # sqlplus abc/[email protected]:1521/lab2
    Connected.
    5)Begin to install unixODBC
    # rpm -ivh oracle-instantclient-odbc-10.2.0.4-1.i386.rpm
    # rpm -ivh unixODBC-2.2.11-7.1.i386.rpm
    # rpm -ivh unixODBC-devel-2.2.11-7.1.i386.rpm
    # rpm -ivh unixODBC-kde-2.2.11-7.1.i386.rpm
    6)After installation above packages I check for existing of odbc.ini and odbcinst.ini in /etc --> ok
    # ls /etc | grep odbc
    odbc.ini
    odbcinst.ini
    7) Tar unixODBC-2.2.14-linux-x86-32.tar.gz and copy file to /usr/local/bin, /usr/local/include, /usr/local/lib
    # tar -xzf unixODBC-2.2.14-linux-x86-32.tar.gz
    # ls /usr/local/bin/
    dltest isql iusql odbc_config odbcinst
    # ls /usr/local/include
    autotest.h odbcinstext.h odbcinst.h sqlext.h sql.h sqltypes.h sqlucode.h unixodbc_conf.h uodbc_extras.h uodbc_stats.h
    # ls /usr/local/lib
    libboundparam.la libgtrtst.la libodbccr.la libodbcinst.la libodbc.la
    libboundparam.so libgtrtst.so libodbccr.so libodbcinst.so libodbc.so
    libboundparam.so.1 libgtrtst.so.1 libodbccr.so.1 libodbcinst.so.1 libodbc.so.1
    libboundparam.so.1.0.0 libgtrtst.so.1.0.0 libodbccr.so.1.0.0 libodbcinst.so.1.0.0 libodbc.so.1.0.0
    # NLS_LANG=AMERICAN_AMERICA.UTF8; export NLS_LANG
    # TNS_ADMIN=/root; export TNS_ADMIN
    # ODBCINI=/etc/odbc.ini; export ODBCINI
    7)Retest sqlplus to Redhad1(Oracle database server) with local tnsname
    # sqlplus vonphoto/vonphoto@lab2
    SQL*Plus: Release 10.2.0.4.0 - Production on Sat Mar 27 03:20:55 2010
    Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    8) Edit odbc.ini and odbcinst.ini
    ---odbcinst.ini
    # Included in the unixODBC package
    [Oracle 10g ODBC driver]
    Description = Oracle ODBC driver for Oracle 10g
    Driver = /usr/lib/oracle/10.2.0.4/client/lib/libsqora.so.10.1
    Setup =
    FileUsage =
    CPTimeout =
    CPReuse =
    ---odbc.ini
    [ora_dns]
    Driver = Oracle 10g ODBC driver
    DSN = ora_dns
    ServerName = xxx.xxx.xxx.121
    UserID = vonphoto
    Application Attributes = T
    Attributes = W
    BatchAutocommitMode = IfAllSuccessful
    BindAsFLOAT = F
    CloseCursor = F
    DisableDPM = F
    DisableMTS = T
    EXECSchemaOpt =
    EXECSyntax = T
    Failover = T
    FailoverDelay = 10
    FailoverRetryCount = 10
    FetchBufferSize = 64000
    ForceWCHAR = F
    Lobs = T
    Longs = T
    MetadataIdDefault = F
    QueryTimeout = T
    ResultSets = T
    SQLGetData extensions = F
    Translation DLL =
    Translation Option = 0
    DisableRULEHint = T
    TraceFile = /backup/sql.log
    Trace = Yes
    9)Testing the driver and the data source
    # odbcinst -q -d
    [Oracle 10g ODBC driver]
    # odbcinst -q -s
    [ora_dns]
    10) Test connection via ODBC from Redhat2(xxx.xxx.xxx.123) to Redhat1(xxx.xxx.xxx.121)
    # isql -v ora_dns
    isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directory
    I have spent 4 days to search on the internet. But it still error.
    Pls help me.

    I don't understand your step 7 (the first step 7, actually).
    What is that unixODBC-2.2.14-linux-x86-32.tar.gz, where did it come from, and why are you doing all that?
    unixODBC should be installed after step 5.
    I guess that that is the cause of your problem.
    isql is not linked against readline at all on my RHEL 5 system.
    Do you notice any improvement after removing the files from that tar.bz file?
    Yours,
    Laurenz Albe

  • VPN Client and Setup for RV042

    Is there a definitive setup for a small VPN using the RV042?
    Situation is 2 remote users wish to get access to a non server (W7P) pc to access files.
    The end point doesn't have a static IP but I've put in a DYNDNS.org so it reports back the IP and I can access the router at least from outside.
    I can setup VPN users but is there more to do?
    Wish to use QVPN client or advise alternative.
    Appreciate all input.
    Thanks
    Bruce

    Bruce,
    QuickVPN normally works well for what you wish to do. Make sure that the Windows Firewall is ON in Windows 7 and Windows Vista clients. Turn off all antivirus and third party firewall software as well at least until you have verified that you have a successful connection. It is very easy to set up, just create a username and password in the router. If you run into trouble, post here or call your local Small Business Support Center:
    http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

  • A case for porting the organizer to Mac - and suggestions for alternatives

    I think that Adobe has really missed a market opportunity in not porting/including the organizer with the mac version of elements.  After a week of intermittent searching, I have found that I am far from the only person in my situation, and there does not seem to be a simple, relatively inexpensive, and at least somewhat automated solution.
    I was a longtime PC user, decided a year ago to try a mac (macbook pro) and have been generally happy with the decision (a few complaints like lack of a real maximize button, no easy way to tile windows, lack of the snap feature ... and sorry fanboys, but just because apple did not decide to implement something does NOT mean that the feature carries no merit).  My wife retains her PC laptop, and I have them networked through wi-fi at the house.  We have been longtime users of elements and back when we both had windows (and elements on each), keeping the library on a NAS was fairly easy.  Initially the folder on the NAS was simply set as the location for the originals uploaded from either laptop, with that folder set as a watch folder in both copies of elements and photos imported to each laptop/copy of elements.  This lead to different libraries on each laptop (ie the crops/edits/tags were different) but at least the core library of originals on each computer was the same.  I then tried keeping the library for both laptops on the NAS (they were sharing the same file) and this worked fair, but did not like that if you took one laptop on vacation, that laptop would only be able to show thumbnails as the full library was not stored locally.  I believe it is/was possible to keep a master library on the NAS and have mulitple copies of elements sync to the same file - but I was never able to achieve this...and then I got the mac and stopped trying.
    So now I have a multiple OS network, and trying to keep the photos organized is proving near impossible.  My current solution is to TRY to bring all the photos into the system through iphoto on the mac, export the keepers to a file on the NAS which has been set as a watch folder on my wifes PC/elements.  This does not set well with my wife, as she does not like having to find my mac to get photos off the camera, and besides it is really irksome to have to do 2 full sets of tagging/editing, and the automation in this system is essentially nil.  The only fairly elegant solutions I have found involve $200-500 digital asset management software.  Having the organizer on the mac would be a large step toward a solution as the database of metadata (beyond simple exif data) would be in the same format across platforms.  The number of people with multiple OS home networks is only going to to continue to grow, and an elegant, relatively inexpensive solution to the above problems would find a large market.
    Soooo... after all that, what have others done in the same situation?  I am not particularly interested in cloud solutions, as so far the speed issues seem prohibitive and I am still somewhat concerned about privacy.
    Thanks

    The MacPro is not a small tower. I don't think it will fit in a standard 19" rack case on it's side, even if you hack-sawed off the feet and handles (and who'd want to do that?!)
    You can rack your Mac vertically with this deal: (it says G5 but I think the case is the same size for MacPro?)
    http://www.redco.com/shopexd.asp?id=876
    And there are up to 5 rackspaces vertically for your outboard gear. This thing is the converter only and you still need to get a 12 space rack.
    3ghz MacPro   Mac OS X (10.4.8)   2g ram, 1900xt, digi002

  • How to find out the host, client and sid for jdbc connection

    I've just registered at oracle application express and would like to test my java programm from my pc
    I need the connection string in form: "jdbc:oracle:thin:@host:port:sid";
    where can I found out my host, port and sid?
    Thanks!
    Edited by: 1009284 on 01.06.2013 14:42

    Hi "1009284",
    If you registered at http://apex.oracle.com, then you are not able to connect directly to the database.
    Joel

Maybe you are looking for