Help configuring system for media system and work

Hello All,
First thanks for your help
Basically I have an outline of what I would like to do and with your help I can get rest figured out. Going to get a Mac Pro 2.66 Ghz 2Gb ram to start with then eventually upgrade to 4g ram, ATI 1900 XT Card,bluetooth and airport,2 superdrives,2 monitors hooked up and 1 hard drive of 750g Thats my starting point
I want to buy 3 seagate drives of 750g each to fill up to max
So question 1. is how do I set up the hard drives I have heard about raid 0 and raid 1 but not sure how to go about it?also want the safest set up have noticed sum people on forums sumtimes lose info so I am concerned
Sum info for the above question is that my plan was to connect the 3 seagate drives into 1 and add my itunes folder to this drive basically a giant media drive plan to have all my music and over 600 and adding movies that i am converting via handbrake so when Itv is realesed I can view all my media on the tv and box all originals up and 1 extra hard drive use that simply for files documents etc.So with this info my next question is
2.Once leopard is realesed what will be best way to back up info?and how using this configuration or different one?
Thank you again I know I probly missed sumthing and will ask as info comes in or I remember
P.s will be doing video editing
PowerBook, soon to be Mac Pro   Mac OS X (10.4.8)  

Your questions have been asked and answered in the Mac Pro forums. I suggest you take some time to search these forums for information. You will find information on RAID performance at http://www.barefeats.com.
For information on backups visit The XLab FAQs and read the FAQ on backup and restore.
RAIDs do not provide any data security. If you need to maintain a backup of your system and data then you will need to provide additional storage sufficient to backup your main storage array. Given your indicated configuration you would need an external RAID system made up of three 750 GB drives that would be used to backup your internal array.

Similar Messages

  • Logical Systems for client 000 and 001

    I've just install solman 7.0 ehp1 sr1 and am going to create a new client from 001.
    Do I need to create logical systems for clients 000 and 001?
    Do I need to creat rfc's for these?
    Thanks,
    Daniel

    no, no need.
    you will create a logical system name for the copied client (such as 100)

  • Give me the Configuration steps  for intercompany billing and third party s

    Hi Gurus,
    Give me  the Configuration steps  for intercompany billing and third party sales and give me a brief description with examples.
    Regards,
    YSR

    Dear YSR
    Check the links
    [Cross Company Configuration|http://help.sap.com/bp_bblibrary/500/Documentation/J62_BB_ConfigGuide_EN_DE.doc]
    [Third Party Without Shipping Notification|http://help.sap.com/bestpractices/BBLibrary/html/J55_ThirdPartyWOSN_EN_US.htm]
    Third party order processing is as follows:
    Assume three companies X, Y and Z
    X - The company,
    y - The customer
    Z - Vendor
    When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
    If he is procuring the goods, there are two methods that are generally followed:
    Method 1)
    After receiving the PO from Y, X creates a sales order against Y.
    Now at the same time he also creates a PO to a vendor Z to produce the goods
    Z produces the goods and supplies to X
    X receives the goods from Z
    Then X delivers the same goods to Y.
    After that X invoices Y and Z invoices X.
    Note : Here there is no direct/ Indirect relation between Z and Y.
    This process is known as Trading Process. and the Material here is created  with Material type HAWA.
    The other method is a Third party order processing method:
    Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
    X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
    Now Z supplies the material to Y and acknowledges the same to X.
    Z  will send a copy of delivery acknowledgement and invoice to X.
    After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
    The next step for X  is to create an invoice and submit to Y
    Only after the invoice verification document is posted  then only X can create an invoice for Y.
    This is the business flow that is followed for third party order configuration.
    There are few steps that have to be configured to enable the system to function as mentioned above.
    Step1)
    If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
    The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
    if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
    Step 2)
    the item category in the order should be manually changed as TAS.
    For that you need to confugure the item category determination
    ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
    OR + NORM +      +       = TAN . + TAS
    OR + BANS +       +       = TAS
    Step 3)
    make sure that during the item category configuration for TAS  you need to mark relevnat for billing indicator as F
    Step 4)
    The schedule line cateogry for this type should be CS.
    make sure that you mark  subsequent type as NB - purchase requisition  in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
    thanks
    G. Lakshmipathi

  • Distribution system for logical system not correctly maintained

    Im logged in into SAP R/3 system. When starting transaction POIT I chose "production orders for".
    I fill in the fields for
    Plant -> 001
    Material -> T-HV200 (Ice Mix)
    At the top I have to enter a "optimization system".
    I chose the logical system I created (CE6CLNT850) from a list.
    After I hit the execute button it says:
    "Distribution system for logical system CE6CLNT850 not correctly maintained."
    The distribution model for CE6CLNT850 (transaction: BD64) looks like this:
    Componentsystem CE6 SAP R/3 4.6c----
    CE6CLNT850
         NX7CLNT800----
    NX7CLNT800,No Short text exists
               LOIPRO----
    Production order
    What is the problem here?
    And by the way, WHY DO I HAVE 479 entries in my list of logical systems when I'm trying to chose the "optimization system"???
    best regards,
    Lunatikk

    Thanks for your answer,
    the RFC destination is configured correctly. It says that the connection works when I run the test.
    I'll post it in an other forum as you suggested but I have another question:
    You said that it is possible to have 474 logical systems configured on the system.
    1. Who defined those systems and why?
    I am the first one in my company using this system.
    We ordered to a SAP system through RAC Service.
    I thought we would get a "fresh installation" of the SAP system -
    2. please correct me if I'm wrong.
    For example there are logical systems with names like "boon software" and "camstar", which are real companies.
    There aren't just logical systems configured, there are also additional RFC destinations, distribution models and ports that were there from the beginning.
    3. Is it possible that those logical systems interfere with the sending of the IDOC. Could it be possible?

  • Business system for legacy system

    hi guys,
    Can we create  business system for legacy system ?If yes what is the use?
    satya reddy

    Hi,
    Yes you have to create Business system for legacy systems..
    It may be the Standalone java . or Third party system..
    When you are doing some POC or such type of things create Business Services
    also..
    A business service represents an abstract unit for addressing message senders and message receivers. You can use a business service to group interfaces.
    It is useful to use business services when configuring cross-company processes. Usually, the interface descriptions of the business partners involved are made publicly available. The system landscape is only partly known, however.
    See the below links..
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
    Regards
    Chilla..

  • CHARM activation check failing on "consolidation system for development system SSA-200 in project ZTEST2

    Hello,
    We are implementing Charmlite and want to activate in project landscape.
    We are Solution Manager 7.1 SP11 and testing this scenario in sandbox.
    Steps completed:
    1. in sandbox domain controller, created two virtual systems and made 3 system landscape, where, I can release the transport and see it in QA system (Virtual system buffer)
    2. The LMDB has been updated with Virtual system and in SMSY, the entries of virtual system shows up. The logical components have the client information.
    Issue:
    in /nsolar_project_admin ->System landscape -> change management, When consistency check is performed, we get error message saying
    Virtual RFC is miising (I am guessing, it should be okay)
    The logical component is incosistent (This might be the reason the CHARM is not getting activated.
    "No consolidation system for development system SSA-200 in project ZTEST2
    No track for project ZTEST2 with log. system SSA/200"
    For me, when i look in satellite system, the consolidation system is a virtual system and it should be fine.
    Please advise
    Regards,
    Durga PK Saitana

    Thank you Karthik. Still the problem persists
    I went through the blog earlier. I created l ABAP instance manually in SLD and moved into LMDB and can see the entry in SMSY. (I did not see any option of putting  virtual flag)
    We were trying harmonization of RFC from note 1384598 and since we had virtual systems, went with domain links.
    After domain links, the virtual systems are read. the Dev ABAP system is not able to find the consolidated system. In the satellite system, I can release transport and move the transport.
    Not sure, why this issue is persistent.

  • I downloaded GarageBand to Ipad2 for $4.99 and worked fine. When I updated Ipad2 to Iso5 it automatically took Garageband off my  iPad2 and downloaded it to my Iphone4. So I removed it from iPhone4 and when I go to download again at app store onto my IPad

    I downloaded GarageBand to Ipad2 for $4.99 and worked fine. When I updated Ipad2 to Iso5 it automatically took Garageband off my  iPad2 and downloaded it to my Iphone4. So I removed it from iPhone4 and when I go to download again at app store onto my IPad it says it is downloaded but when searching for icon on Ipad2, it won't show up at all.  I have tried hard reset and all.  Help!!!

    I'm not sure, but you might get better luck posting the same question in the iPad forum:
    https://discussions.apple.com/community/ipad/using_ipad

  • Changing the data in DataSource in R/3 System for Project System

    Can we change the data of DataSource which is extracted from R/3 sYSTEM for Project System Module?

    Hello Rajesh,
    You can modify it in PSA. Or write the routines or rules logic as per your requirement.
    Could you please elaborate more on what kind of changes you are interested for.
    San.

  • Link for Cost Center And Work Center.

    Dear Experts,
    Can you Provide me the Link for Cost Center And Work Center.
    Regads,
    Jyoshna

    Dear Experts,
    I got the answer for the Link Between Cost Center And Work Center.
    By using CR03   T Code we can see the Display Work Center : Cost Center Assignment Screen will appear.
    we need to select the costing tab, We can find Cost Center .
    Thanks & Regards
    Jyoshna

  • Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

    Hi
    Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

    Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
    There are two situations where you can use this depending on the type of client:
    1. To keep inventory reports on a client (that is not an MP), create the following file:
    %systemroot%\ccm\inventory\temp\archive_reports.sms
    2. To keep inventory reports on a MP (that is also a client), create the following file:
    <x>:\sms_ccm\inventory\temp\archive_reports.sms
    The XML file will be saved in the inventory\temp folder.
    More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

  • [svn] 4534: Add configuration tests for flexclient, destination and services

    Revision: 4534
    Author: [email protected]
    Date: 2009-01-14 16:02:42 -0800 (Wed, 14 Jan 2009)
    Log Message:
    Add configuration tests for flexclient, destination and services
    checkintests: passed
    Added Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/erro r.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/serv ices-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/dest-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/e rror.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/s ervices-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/error. txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/servic es-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/error. txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/servic es-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/error.tx t
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/services -config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/er ror.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/se rvices-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/e rror.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/s ervices-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/erro r.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/serv ices-config.xml

    Revision: 4534
    Author: [email protected]
    Date: 2009-01-14 16:02:42 -0800 (Wed, 14 Jan 2009)
    Log Message:
    Add configuration tests for flexclient, destination and services
    checkintests: passed
    Added Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/erro r.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/serv ices-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/dest-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/e rror.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/s ervices-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/error. txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/servic es-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/error. txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/servic es-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/error.tx t
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/services -config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/er ror.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/se rvices-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/e rror.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/s ervices-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/error.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/services-config.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/erro r.txt
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/serv ices-config.xml

  • Help systems for Win, Linux, and Solaris

    Is there a flavor of RoboHelp that can generate
    cross-platform help? I would like to create a single Help system
    for Windows, Linux Redhat 4 ES, and Solaris 10.

    See http://forums.adobe.com/thread/1417974
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Risks when maintain only one SolMan system for DEV, QAS and PRD systems

    What are the risks involved when maintaining only one solution manager system for entire client landscape(Small size).
    Or No risks are involved?
    Or Is this the SAP rrecommended approach for small size landscapes?
    One SolMan system -> DEV and QAS and another SolMan system -> PRD.

    >
    Sanjai Prabu Govindan wrote:
    > What are the risks involved when maintaining only one solution manager system for entire client landscape(Small size).
    > Or No risks are involved?
    Anand: Risks Involved depends on what all aspects\Scenarios the Solution Manager System is used for. It Could be used for the following purposes
    1) Service Desk
    2) Solution Monitoring
    3) System Monitoring
    4) Change Management
    How do you propose to use the Solman system ?
    >
    > Or Is this the SAP rrecommended approach for small size landscapes?
    > One SolMan system -> DEV and QAS and another SolMan system -> PRD.
    Anand: This is the most idealistic and SAP recommended way of using Solman....it always better to have it this way no matter in how many scenarios you intend to use Solman for....
    Regards,
    Anand.....

  • One PI system for Dev, QA and Prod..possible?

    Hello Experts,
    I have been told that there will be just one PI system, for development and the same has to be used as QA in IST and for Production...
    I have 4 scenarios , 2 are JDBC to Proxy and 2 are file to proxy..
    Hence, I have to connect to ECC as well for the proxy...
    Is it possible????
    please put  forth ur views on this...
    Regards,
    Teja

    Hi Guys,
    Thank you for ur reply
    I believe this is a temp solution before the real hardware arrives...
    Hence, dev can be ready by then  but the point is that ther is ERP for dev, ERp for QA and ERP for Prod...
    How can i connect the same Pi system to three different erp s??
    as all scenarios have proxy...
    Can u pls throw light on this?
    Regards,
    Teja
    Edited by: Ravindra Teja on Sep 29, 2009 7:42 AM

  • Help configuring PulseAudio for 2.1 on laptop [SOLVED]

    Hello
    I've been trying to figure out how to properly configure PulseAudio for my laptop for the past couple of nights, but haven't had much luck.  I'm may be misunderstanding my laptop's audo setup correctly.  Seeing stuff like True 5.1, Dobly Home Theater, and Virtual SurroundSound confused me, but right now I think 5.1 is only for HDMI output (which I don't use).  My laptop has a so-called subwoofer and in alsamixer I have controls for front and lfe.
    By default, pulseaudio chooses stereo, which sounds fine for anything that stereo or mono, but if I play a DVD in VLC I can barely hear voices and but hear parts of music and background sounds.
    Also, for some reason if I run speaker-test -c 2 -t wav.  Front-left is loud and somewhat distorted while Front-right is really soft.  Yet it still sounds fine (to me) when listening to non-surround content.
    Everything worked perfectly before pulseaudio was pulled in.
    I tried following this post on manually loading the alsa sources and sink modules, but it didn't work.
    Running pulseaudio in verbose mode showed that hw:0 doesn't support 3 channels and then defaults to stereo.
    default-sample-channels = 3
    default-channel-map = front-left,front-right,lfe
    I also just tried the above in daemon.conf just to see what would happen but, it ignored it... 
    What am I doing wrong?  Am I going about this the wrong way?
    Any help would be much appreciated.
    More information:
    My laptop series/specs:
    http://support.acer.com/acerpanam/noteb … 0sp2.shtml
    uname -a
    Linux archlaptop 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 12:14:48 UTC 2011 i686 AMD Athlon(tm) X2 Dual-Core QL-62 AuthenticAMD GNU/Linux
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    default.pa
    ### Load audio drivers statically
    ### (it's probably better to not load these drivers manually, but instead
    ### use module-udev-detect -- see below -- for doing this automatically)
    #load-module module-alsa-sink
    #load-module module-alsa-source device=hw:1,0
    #load-module module-oss device="/dev/dsp" sink_name=output source_name=input
    #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
    #load-module module-null-sink
    #load-module module-pipe-sink
    load-module module-alsa-source device=hw:0
    load-module module-alsa-sink device=hw:0 channels=3 channel_map=front-left,front-right,lfe
    ### Automatically load driver modules depending on the hardware available
    #.ifexists module-udev-detect.so
    #load-module module-udev-detect
    #.else
    ### Use the static hardware detection module (for systems that lack udev/hal support)
    #load-module module-detect
    #.endif
    Last edited by Vortalex (2011-11-14 05:20:52)

    Update.
    I got vlc to work right.  Yay!
    I deleted my .vlc directory
    Then, manually set the output to alsa (and set Device to Default) which then ungrayed the Audio > Audio Device menu to select Stereo
    edit:
    I noticed I loose audio in VLC if I pause or seek around too much...   Work around for now is to disable and reenable the audio.
    looking with pavucontol vlc is still there, it just doesn't do anything.
    anyway, this new problem is probably for a different thread
    Last edited by Vortalex (2011-11-14 06:34:33)

Maybe you are looking for

  • Creation of Hash Partitioned Global Index

    Hash Partion Index creation Hi friends, Could you suggest me whether we can create a hash partitioned index by using syntax as below in 9i. CREATE INDEX hgidx ON tab (c1,c2,c3) GLOBAL PARTITION BY HASH (c1,c2) (PARTITION p1 TABLESPACE tbs_1, PARTITIO

  • Tri-folds

    Have just installed Adobe Photoshop Elements 10 and Adobe Premiere Elements 10. How do I get to Adobe's tri-fold creative page?

  • Please hep me , struggiling to install adobe photoshop

    Good day! I bought adobe photoshop elements 10 and adobe premiere elements 10 at a istore for my macbook pro and know i cant install my disc on my macbook please help me ! thank you ....

  • Iphone cannot be synced a file was specified

    I dont have quartz nor do I have itoner, but my iphone 4s will not sync to my imac. What do I do? And please, I am old, so please give me step by step.(ha ha)

  • X-Fi2 - no Tags are updated on resync? Is it really true?

    Hi, I already posted a thread considering the star rating - but another even more shocking Issue appeared: The X-Fi2 doesn't update Tags if you re-sync? I tried under XP/Win7 with Creative Central, WMP, Media Monkey... no matter what kind of synchron