Help configuring webdav permissions

Hopefully an easy one to answer.
I want to enable access via webdav to a folder on our 10.6 OS X Server. We use it for wiki, iCal and AB Server services, and host files for general download etc.
The download files are in a folder within the site and are accessed normally via anonymous web browser download (e.g. https://<url>/folder/file.jpg).
Currently we manage the files within the folder using FTP connections. We want to change to using WebDAV to manage the files in the folder.
I tried enabling WebDAV on the site, and then setting a realm (based either on the Folder, or the Location) that limited read / write access to a specific group of users. But we found if we did this, any user could get full read / write access to the entire server without authentication at all... So we added a second realm for the entire site (/) giving no access to anyone who wasn't authenticated. Then if you try to download a file you have authenticate to get the file...
Could someone explain how we need to set these permissions so that:
people can download files from the server anonymously, but otherwise not browse the folders of the site
nominated users (i.e. a user group) on our server can access the folder containing the files via webdav, but not otherwise browse the site files
normal web services on the system are not affected by these changes.
Thanks in advance for your help.

Hi everybody!
I hope you are still following this post in hope to find a solution. Today you will be rewarded. Solution was plain simple as all things Apple. It was on the surface and I was searching in the deep and obviusly failed.
So lets get to work. You know that SLS comes with SquirrelMail which is piece of crap. Every time you click on mail link in Wiki Server it will take you to SquirrelMail login screen. This screen is login.php file.
So in order to redirect Wiki Mail to any URL of your choice you just need to edit or substitute login.php file which is located in /usr/share/squirrelmail/ like this
<?php
/* Redirect browser */
header("Location: http://your_preffered_url/");
exit;
?>
Enjoy!

Similar Messages

Configuring webDAV

Hello,
I am trying to install MaxDB to configure webDAV.
I have already installed Apache Tomcat and MaxDB 7.7 SP06 Build 10. But I am not able to find the WebDAV-Servlet in the currently installed software components.
Guess the software components depends on the version and the build . Can anyone please tell me the MaxDB 7.7version which will contain the WebDAV-Servlet?
Thanks in advance!
Abhilash

> I have already installed Apache Tomcat and MaxDB 7.7 SP06 Build 10. But I am not able to find the WebDAV-Servlet in the currently installed software components.
You don't seem to have used the SDN download for that (as here in SDN version 7.7.06 SP 9 is the most current available version).
Please use this one.
Also, you may want to check whether you've actually installed the WEBDAV component.
Apart from that, I tend to believe that reading the documentation ([here|http://maxdb.sap.com/doc/7_7/bb/b71170c286429da51c346bbb4e9d2e/content.htm]) could help to a large extent...
> Guess the software components depends on the version and the build . Can anyone please tell me the MaxDB 7.7version which will contain the WebDAV-Servlet?
regards,
Lars

Problem in Application Help Configuration in Solution Manager

Hi Experts,
Here I facing one problem during Application Help configuration..
When I am going through application help for Solman Configuration it's taking me to standard erp help..
Where as in SR13, under PlainHtmlHttp,
In path tab I had given <b>saphelp_sm40/helpdata</b> for solution manager document.
But for other standard t-code it's giving actual application help.
where for SMSY,SOLAR01 etc i am not getting the application help.
Looking for advices.
Thanks & Regards,
Sumanta Chatterjee

Dear Sumanta,
This depends on how you want to (or how you can) use this http://help.
sap.com site.
At first you must be aware of the different areas on this site, these
areas have different URL structures, for example:
- http://help.sap.com/saphelp_erp2004 <<< for mySAP ERP
- http://help.sap.com/saphelp_47x200 <<< for R3 Enterprise
- http://help.sap.com/saphelp_nw04    <<< for SAP NetWeaver 04
- http://help.sap.com/saphelp_sm32    <<< for SAP Solution Manager 3.2
The main problem is that in the area "http://help.sap.com/saphelp_sm32"
there is only online documentation for the Solution Manager
functionality.
Can you please check the table SBAON_CCHK with transaction SE16.
The following record must exist:
MANDT COMPONENT                NAME_EN
xxx   ST                       Solar Help
If this record does not exist, please create this record manually.
This should help resolve the issue.
Regards
Amit

Need Flash Help - configuring AIrtight Simple Viewer Pro

I need some help configuring the Airtight Interactive simple viewer pro, which requires flash. I am a complete beginner with flash, and I am reluctant to undertake the learning curve, though I am very tech saavy.
My ideal would be to locate someone who could do this FOR me, though resources are very limited for this project. Any suggestions of where I might connect with someone interested in doing this?
Alternately, I could undertake it myself, with someone qualified to coach me rather thouroughly through the whole process. That could be offline, or here where others could benefit from the thread. If someone offers this, I will post the precise details of what I need. The project is medium challenging, not extremely complex, but more than very basic.
Many Thanks.

Hi:
When you create the simpleviewer slideshow with iPhoto's plugin there should be a folder created on your HD that contains the items seen in the screenshot below:
The folder was named simpleviewer because that's what I named it during the export from iPhoto. That's the same folder as I refer to as "Slideshow folder". It can be whatever you name it when exporting from iPhoto. Upload that folder to your iDisk/Web/Sites folder as shown below:
In the iFrame code use the following URL to the index.html file inside the simpleviewer folder:
http://web.me.com/YourMMe_AccountName/simplerviewer/index.html
That should do it.

Need help configuring VPN on RV120W Router (WiTopia VPN)

Hello Cisco Community,
I need some help configuring a VPN from WiTopia on my RV120W router. I am trying to make it so that if any device connects to the router it can automatically connect to the VPN from WiTopia.
Please note that the VPN plan includes PPTP, L2TP, & IPSEC VPN types.
Is this possible? And if so, how?
Thanks in advance!

Hello,
If WiTopia is providing only client to gateway VPN, where WiTopia is the gateway allowing connections to clients, than you will not be able to configure RV120 to connect to it. RV120 in its VPN configurations cannot be configured to be a client.
The only tunnel where can play the role of the connecting part is IPSec gateway to gateway, when in the IKE policy the Direction type is Initiator and the Exchange mode is Aggressive. And you will need to receive all additional configuration parameters from WiTopia -the Encryption, Authentication Algorithm, PFS, SA lifetime and so on. But this means that WiTopia have to provide gateway to gateway VPN connection.
Regards,
Kremena

Need some Help configuring sip

Hi all ! ,
Im kind off new to sip calling and cisco telephony , but here goes ,: i have a 2821 router with CME installed
IOS : C2800NM-IPVOICEK9-M
Sofware version : 15.1(4)M4 / CME 8.6
Attached to GE0/0 is a CISCO 3750 switch
GEO - consisfts of 3 VLANS , the native
172.22.1.X
172.22.100.X VOICE
172.22.101.X DATA
my tftpserver = 172.22.1.150
i need some help configuring a sip trunk , i have 10 testing phonenumbers from vodafone , but i do not know where to start to get this working
i have tried
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml
but im getting stuck with what to fill in where .. is there anyone form NL whom has the same setup ? or similar ? or can give me some guidance on how to make the test calls

ok.. here goes
Building configuration...
Current configuration : 9721 bytes
! Last configuration change at 15:26:14 CET Thu Jan 2 2014
! NVRAM config last updated at 15:26:14 CET Thu Jan 2 2014
! NVRAM config last updated at 15:26:14 CET Thu Jan 2 2014
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
no aaa new-model
clock timezone CET 1 0
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-select 1 E1 0/0/0
network-clock-select 2 E1 0/0/1
dot11 syslog
ip source-route
ip cef
ip dhcp pool VOICE
network 172.22.100.0 255.255.255.0
option 150 ip 172.22.1.150
default-router 172.22.100.1
ip dhcp pool DATA
network 172.22.101.0 255.255.255.0
default-router 172.22.101.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-net5
voice service voip
ip address trusted list
ipv4 172.22.1.50
ipv4 172.22.1.51
ipv4 172.22.100.1
ipv4 172.22.101.1
ipv4 62.140.159.225
callmonitor
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
registrar server expires max 3600 min 3600
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice register global
voice translation-rule 1
rule 1 /5123781291/ /601/
rule 2 /5123781290/ /600/
voice translation-rule 2
rule 1 /^112$/ /112/
voice translation-rule 3
rule 1 /^.*/ /0262610290/
voice translation-rule 4
rule 2 /600/ /5123788000/
rule 3 /601/ /5123788001/
rule 4 /^2(..)$/ /51237812\1/
voice translation-profile CUE_Voicemail/AutoAttendant
translate called 1
voice translation-profile PSTN_CallForwarding
translate redirect-target 4
translate redirect-called 4
voice translation-profile PSTN_Outgoing
translate calling 3
translate called 2
translate redirect-target 4
translate redirect-called 4
voice-card 0
crypto pki token default removal timeout 0
controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-31
controller E1 0/0/1
framing NO-CRC4
pri-group timeslots 1-31
ip ftp username cisco
ip ftp password cisco123
ip tftp source-interface GigabitEthernet0/0.1
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
no keepalive
interface GigabitEthernet0/0.1
encapsulation dot1Q 1 native
ip address 172.22.1.51 255.255.255.0
interface GigabitEthernet0/0.20
encapsulation dot1Q 20
ip address 172.22.101.1 255.255.255.0
interface GigabitEthernet0/0.100
encapsulation dot1Q 100
ip address 172.22.100.1 255.255.255.0
interface GigabitEthernet0/1
no ip address
shutdown
duplex full
speed 100
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface Serial0/0/1:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http max-connections 16
ip http path flash:gui
ip route 0.0.0.0 0.0.0.0 172.22.1.50
tftp-server flash:7941/apps41.8-4-1-23.sbn alias apps41.8-4-1-23.sbn
tftp-server flash:7941/cnu41.8-4-1-23.sbn alias cnu41.8-4-1-23.sbn
tftp-server flash:7941/dsp41.8-4-1-23.sbn alias dsp41.8-4-1-23.sbn
tftp-server flash:7941/jar41sccp.8-4-1-23.sbn alias jar41sccp.8-4-1-23.sbn
tftp-server flash:7941/cvm41sccp.8-4-1-23.sbn alias cvm41sccp.8-4-1-23.sbn
tftp-server flash:7941/SCCP41.8-4-2S.loads alias SCCP41.8-4-2S.loads
tftp-server flash:7941/term41.default.loads alias term41.default.loads
tftp-server debug
control-plane
voice-port 0/0/0:15
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/0/1:15
voice-port 2/0/0
voice-port 2/0/1
voice-port 2/0/2
voice-port 2/0/3
voice-port 2/0/4
voice-port 2/0/5
voice-port 2/0/6
voice-port 2/0/7
voice-port 2/0/8
voice-port 2/0/9
voice-port 2/0/10
voice-port 2/0/11
voice-port 2/0/12
voice-port 2/0/13
voice-port 2/0/14
voice-port 2/0/15
voice-port 2/0/16
voice-port 2/0/17
voice-port 2/0/18
voice-port 2/0/19
voice-port 2/0/20
voice-port 2/0/21
voice-port 2/0/22
voice-port 2/0/23
mgcp profile default
dial-peer voice 1 voip
description **Incomming Call from SIP Trunk**
translation-profile incoming CUE_Voicemail/AutoAttendant
session protocol sipv2
session target ipv4:172.22.1.50
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 2 voip
description **Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9........
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 3 voip
description **Outgoing Call to SIP Trunk **
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[2-9]..[2-9]......
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 4 voip
description **Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[0-1][2-9]..[2-9]......
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 5 voip
description **911 Outgoing Call to SIP trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 911
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 6 voip
description **Emergency Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9911
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 7 voip
description **911/411 Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[2-9]11
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 8 voip
description **International Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9011T
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 9 voip
description **Star Code to SIP Trunk**
destination-pattern *..
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 10 voip
description **CUE Voicemail**
translation-profile outgoing PSTN_CallForwarding
destination-pattern 600
b2bua
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 11 voip
description **CUE Auto Attendant**
translation-profile outgoing PSTN_CallForwarding
destination-pattern 601
b2bua
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay sip-notify
codec g711ulaw
no vad
sip-ua
authentication username 0262610290 password 7 15020A1F173D24362C realm 62.140.1
59.225
authentication username 0262610290 password 7 021605481811003348
no remote-party-id
retry invite 2
retry register 10
timers connect 100
registrar ipv4:62.140.159.225 expires 3600
sip-server ipv4:62.140.159.224
host-registrar
telephony-service
max-ephones 58
max-dn 192
ip source-address 172.22.100.1 port 2000
calling-number initiator
system message testing
cnf-file location TFTP tftp://172.22.1.150/
load 7960-7940 P00307020200.loads
load 7941 SCCP41.8-4-2S.loads
load 7941GE SCCP41.8-4-2S
time-format 24
dialplan-pattern 1 26261029.. extension-length 3 extension-pattern 9..
voicemail 600
max-conferences 12 gain -6
call-forward pattern 9.T
moh music-on-hold.au
web admin system name admin password password
dn-webedit
time-webedit
transfer-system full-consult
secondary-dialtone 9
directory entry 1 101 name 101
create cnf-files version-stamp 7960 Jan 02 2014 08:40:49
ephone-dn 1
number 290 secondary 0262610290
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 291 secondary 0262610291
name phone 2
hold-alert 30 originator
ephone-dn 3
number 292 secondary 0262610292
name Phone 3
hold-alert 30 originator
ephone-dn 4
number 293 secondary 0262610293
name Phone 4
hold-alert 30 originator
ephone-dn 5
number 294 secondary 0262610294
label Phone 5
hold-alert 30 originator
ephone 1
mac-address 0019.E88F.3BDD
button 1:1
ephone 2
mac-address 001E.4A92.0A27
type 7961
button 1:2
ephone 3
mac-address 0012.43F5.03AF
button 1:3
ephone 4
mac-address 000F.F7AC.502A
button 1:4
ephone 5
mac-address 0019.E851.090A
button 1:5
line con 0
line aux 0
line vty 0 4
login
transport input all
scheduler allocate 20000 1000
ntp master
end

Help configuring dashboard editor to be read-only for shared dashboards

Hi,
Can someone help me configure my Oracle BI user group permissions so that...
my dashboard developers to be able to see the reports and prompts make up our shared dashboards (ie. use the "Page Options>Edit Dashboard..." menu option). But I'd like to stop them from being able to save changes to shared dashboards.
Thanks,
Darcy

Not quite.
I want my users to be able to use the "edit dashboard...." menu option so they can see the reports, prompts,... that make up the dashboard. My challenge is I don't want them to be able to use the "save" button and make changes to the dashboard though.
Darcy

Help With Repair Permissions!

Hi All,
I have a June 2009 17" 2.8 UMBP. I keep getting regular Spinning Beach Balls, Lock Ups, Delays and a whole host of Trackpad Issues much like many people are experiencing with the 1.7 Firmware Update which only is supposed to affect the 13" & 15" UBMP Models. I read on another post that Apple recommended to "Verify & Repair Disk Permissions" which I done. The problems still remain and the report in "Verfiy Permissions" is exactly the same (it seems) as that of the "Repair Permissions" and where it says "Repair Permissions Complete" at the end. The "Repair Permissions" Report still says that "Permissions Differ" on all lines - how can they have been repaired if they still differ? I am a novice and not technically aware about Macs so I hope someone can help me. Here is a copy of the report:
2009-07-17 15:10:11 +0100: Verify permissions for “Macintosh HD”
2009-07-17 15:10:23 +0100: Reading permissions database.
2009-07-17 15:10:23 +0100: Reading the permissions database can take several minutes.
2009-07-17 15:13:50 +0100: Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:52 +0100: Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:52 +0100: Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:52 +0100: Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:52 +0100: Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:53 +0100: Permissions differ on "System/Library/QuickTime/AppleProResDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:53 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:53 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:53 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:53 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:14:31 +0100:
2009-07-17 15:14:31 +0100: Permissions verification complete
2009-07-17 15:14:31 +0100:
2009-07-17 15:14:31 +0100:
2009-07-17 15:14:38 +0100: Repairing permissions for “Macintosh HD”
2009-07-17 15:15:07 +0100: Reading permissions database.
2009-07-17 15:15:07 +0100: Reading the permissions database can take several minutes.
2009-07-17 15:18:32 +0100: Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:33 +0100: Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:34 +0100: Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:34 +0100: Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:34 +0100: Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/QuickTime/AppleProResDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-07-17 15:19:13 +0100:
2009-07-17 15:19:13 +0100: Permissions repair complete
2009-07-17 15:19:13 +0100:
2009-07-17 15:19:13 +0100:
How do I fix things so things do not differ? I am hoping that will then fix the issues I am experiencing with my UBMP!
Thank You,
Suave!

Hi
I think you will find that many people are suffering this very same problem with permissions, it is nothing to be too concerned about and will in all probability disappear after a system update sometime in the future.
There was a similar problem when I had a PowerBook G4 every time you repaired permissions it showed a whole raft of errors which would not go away. Eventually Apple released a system update and they all vanished.
It is not broken and it is not going to impact on the running of the computer in anyway.
I have just got a new MBP and have the same permission problem but my trackpad is functioning perfectly and I don't suffer any spinning beach ball.
I would contact Apple, or go into an Apple Store and seek advice about the trackpad and spinning beach ball as these are probably caused by other problems than permissions being wrong.
Phil

Need help configuring Aiport Extreme A1034 to optimize network signal.

Greetings, I am a very loyal mac user from back in the days of the Quadra 650. I have torn apart and fixed most macs for the last 13, but I must say configuring this wireless network has got me stumped. Any help would be gladly appreciated.
I went from a ibook 1 Ghz with a plastic case to a aluminum powerbook g4 1.67 to find out that the metal case greatly diminished the computers ability to receive a wifi signal from my Rv park. I then decided to buy an Airport Extreme A1034 that has the antenna port and then bought a Hawking 15db directional antenna. My intention was to have the Airport Base station receive the 802.11b wifi signal sent out from the office of the RV park through the Hawking antenna, and then have the base station take that signal it received and send that high speed wifi signal to the airport card in my Powerbook G4. Sounds simple enough, I thought it would be. I have found that using Airport set up assistant doesn't give me that option. I then proceeded to get into the workings of the Airport Admin Utility. I have found myself ready to pull my hair out trying to configure the 6 different tabs being, Airport , Internet, Network, Port Mapping, Access control, and WDS.
I do know that everything in the Airport tab is correct. The big problem I think is between the Internet, Network and WDS tabs. It seems that the Airport base station was basically made to have a high speed connection plugged into it via ethernet and then the base station broadcasts to host computers such as my PowerBook G4. My initial thought was to connect via Airport WDS in the internet tab and then set my powerbook to connect directly to the base station through the airport card. I read up on this via Apples Designing Airport networks that came on the Airport installation CD. It talked in detail about setting up the WDS tab to do something like I want but it still involves a hard wired ethernet connection at the start of it. I have also played around extensively with the Network control panel and the sharing control panel , I thought about turning the airport card inside my powerbook into a software or virtual base station and then try some sort of WDS relay. Through all this I had the Airport extreme go none responsive on me and not letting me log in. That's another story of 10 hours of **** fixing it, but i did. Even the reset button stopped working for a while. As of now I can access everything everywhere. I also have ALL the IP addresses Hardware(MAC) address, subnet masks and router addresses for every location in this proposed wireless chain. I just need someone to end this stressful nightmare. They say you learn through trial and error, that is how I learned most of my computer skills over the decades, that and Applecare certified tech training many years ago, But it doesn't help anyone if I stick a large knife through my base station. I can provide a phone number if your willing to call. My email is [email protected] . If your in the San Diego area, I can get ya free passes to the nudist colony where I live, if your in for a new adventure in turn for setting up this network for me. Check out http://www.deanzasprings.com . its where I live.
Rich

1. First, can someone confirm that the Extreme card be used as a WDS main base?
Sorry, but no you cannot use the AirPort Extreme card in a WDS as either a main, relay or remote base station. It does not support this function.

Need help configuring Cisco/Linksys wireless router to extend wi-fi signal to living room

My U-verse wireless gateway is in the back of our house. We live in an old 1920's home with solid wood walls. For our macbooks, we get a pretty decent signal, but my wife's iPad 2 get's poor wi-fi speeds. I bought a Cisco/Linksys WRT160N wireless N broadband router. I have a wired connection in my living room (going to a 4 port switch) then connected to my DVR. I tried hooking up the new router but ended up getting no signal on the iPad. In fact, it caused other issues. I ended up disconnecting it and re-booting my gateway. All came back fine. This wireless router replaces a similar unit that went out in after a power failure, so I know this can be done, but I forget exactly how I confiured the old one. I would like it to "extend" my signal to the living room, but I am also willing to create a new network (different SSID). Do I need to turn of DHCP? Are there any web sites that can assist me in configuring the router? I wish I didn't have to deal with this. The signal from the RG is great when you are in the back room (20+ down). But my wife gets about 3 down on her iPad in the living room. Thanks in advance.

Hi ,
I was doing some research on how this can be done. It does not appear there is an option in the Cisco router to set it up as an access point, but there are several options you can do to extend your network.
The first thing you can do is just set it up as a router behind router setup, and you will just have two separate networks. Make sure the DHCP pool does not conflict with the U-verse's gateway of 192.168.1.x.
The second thing you can do is connect the Ethernet cable to one of the LAN ports on your Cisco router instead of using the internet port. This should make it work like a smart switch.
With both setups, you want to probably change the SSID, network key, and wireless security settings to the same thing for wireless roaming abilities. That way, anyone that configures their wireless connection will be connected to both networks. Just make sure the wireless channels are not the same, and I would suggest having them at least 5 apart.
Hope this helps.
-ATTU-verseCare

Help needed with permissions problem in new Aperture 3.5.1

Hello and thank you for helping me with my first question to this wonderful support center. I have been using Aperture for many years. I recently upgraded my Mac to Mavericks, now running 10.9.2. and then upgraded (by necessity) to Aperture 3.5.1. I am working on a big project for a client and have an assistant in another city. I live outside the US so mailed my library to my asst. on an external drive. She updated to 10.9.2 or .3 and Aperture 3.5.1. No problems. She modified the library and sent the library to the client in another city in the US on an external drive who has also upgraded to Mavericks and is running Aperture 3.5.1. So we are all in Mavericks with recent Apertures. When client tried to open the sent library client got a message that stated:
"Aperture cannot access this library. To use this library, make sure its file permissions are set correctly.”
Clientʻs Tech assistant at her office is a PC specialist but apparently did try on Friday and did try to repair permissions but I am told that it did not work. I wish I had more specific info on what Tech assistant did but I do not at this time.
On Monday I would like to give them very specific instructions about what to do to open the library
For recent discussions I have found only this
https://discussions.apple.com/message/23600132#23600132
Oct 30, 2013 3:35 PM by Frank Caggiano
about repairing permissions.
I am sure that we are all running Mavericks and new Aperture, that does not seem to be at the root of the immediate problem. As we are in two different countries and three different cities and communication is hard, please tell me if this is a common problem with an easy fix and if it should be fixed by Repairing Permissions, please tell me exactly what I should tell them to do on Monday. They can at least see this discussion from their city!
Many thanks!! This is an urgent project so I very much appreciate your help.

Have your collegues check the file system of the drive and the "Ignore Ownership on this volume" flag.
To check the filesystem and "Ignore ownership" flag select the drive in the Finder and use the command "File > Get Info ⌘i"
In the panel unlock the padlock in the "Sharing & Permissions" brick and set the "Ignore ownership" flag at the bottom of the panel.
Also, check the "General" brick of the panel. The format should be showing as "Mac OS Extended (Journaled)". Aperture checks for the correct formating before opening a library and may refuse to open a library on a drive formatted for Windows.
If the format is wrong, it would be best to move the library to a different drive with the correct formatting.
Once the "Ignore ownership" flag is set, try again to repair the permissions and see, ifyou now can open the library.

DNS Help: Configure for local and extenal services using same domain name?

Hello all. I'm setting up a 10.5 server, have scoured these great forums and gotten close, but am still stuck. Any help would be greatly appreciated.
My network setup is as follows: Internet (2xT1) > modem > router/firewall/NAT device > XServe > switches > rest of network, clients, etc. Pretty standard, I believe.
I'd like to use this XServe on our local network/intranet/LAN only for OD, networked home directories, AFP, iCal, Time Machine, Print and Software Update.
My website is hosted on an external server.
My email is also hosted on a (different) external server.
Domain is school.edu
XServe name is xserve.school.edu
XServe is 10.0.0.25
I've gone through Apple's recommended DNS setup (supplemented by some great info found here on the forums....), and am able to connect to other Internet sites (with client's DNS server set as 10.0.0.25), but unable to connect to www.school.edu, or send/receive mail to/from mail.school.edu.
In short, connecting to external domains that are NOT related to my school are fine, but I'm unable to connect to any domain that IS related to my school.
If anyone out there can shoot me some notes on how to configure the DNS settings, zones, forwarding, etc. to accomplish this, I'd be VERY appreciative.
Thanks, in advance, to anyone who can help me out.
Cheers,
Tim

In short, connecting to external domains that are NOT related to my school are fine, but I'm unable to connect to any domain that IS related to my school.
If your server thinks it's authoritative for 'school.edu' then you have to add records for every host in the school.edu zone.
For example, if you want to be able to resolve 'www.school.edu' then you have to have a 'www' record. If you want to send/receive mail you have to add an MX record, and so on.
It doesn't matter that you're not responsible for those servers, it's just that since this machine thinks it 'owns' school.edu it will only respond with records in its own zone and won't care about what any other name server says, even if that other name server is authoritative for the zone.
FWIW, that's often why people running stub servers like this choose a separate subdomain (like 'dept.school.edu') so they can leave the main school.edu records on the main server and have full control over a subdomain.

Need help configuring Excel Services

I've configured both the Excel Serives and Secure Store Target applications and continually receive the following error message when trying to view the Simple Projects List sample report:
An error occurred while accessing application id ProjectServerApplication from Secure Store Service. The following connections failed to refresh:
Project Server - Simple Projects List
The Server Logs show the following errors:
Access Denied: Claims stored in the credentials did not match with the group claim for a group app.
The Microsoft Secure Store Services application Secure Store Service failed to retrieve credentials. The error returned was 'Access Denied.' ...
Access is denied. (Fault Detail is equal to Microsoft.Office.SecureStoreService.Server.SecureStoreServiceFault)
SSS has failed with the following exception: Access is denied.
Unable to esablish a connection using credentials retrieved from SSS. This could be because the Unattended Service Account is not configured or because the credentials retrieved from SSS are not valid.
I've repeated the steps to create these configurations a few times, and continue to get the same errors. Any help would be appreciated!
Thanks

Hello,
I need help setting up excel services.
Excel service is already running on sharepoint server.
I have one reporting file which is generated by DBA with database connection. i want to upload that file under document library and i want whenever user open it through document library, it gets updated through database connection
This is my first time, so pls guide me
Reporting file has authentication set to --> None
Do i require any specific settings for authentication? like unattended account ? which username should i use
Connection String -->
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=True;User ID=ExcelServices;Initial Catalog=SurveyData;Data Source=jdb1;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RSTKW7W-06709;Use Encryption for Data=False;Tag
with column collation when possible=False
http://../training/sptestsite/Medication_Audit_Report
http://../training/sptestsite/Medication_Audit_Data_Connection_Library/
Trusted File Location - is this place do i need to upload that reporting file?
Trusted Data Connection Libraries - is this place do i need to save connection file .odc ?
If i am not wrong, should i put
Trusted File Location = http://../training/sptestsite/Medication_Audit_Report
Trusted Data Connection Libraries = http://../training/sptestsite/Medication_Audit_Data_Connection_Library/
http://../training/sptestsite/Medication_Audit_Report -- Here only reporting file will be uploaded right?
http://../training/sptestsite/Medication_Audit_Data_Connection_Library/ -- Here only database connection .odc file will be uploaded?
what other settings are required. please correct me
my email address - [email protected]
Harsh

Need help configuring VPN - problems accessing the networks

Hi everyone, hope someone can help me out here.
I'm administering the network for our small company. We basically have two sets of machines - public ones with fixed net addresses (mail, web, dns servers, etc), and private ones behind a wireless router/nat.
Our main need here is to be able to VPN in to the public side, in particular, the mailserver, so that we can get around all the stupid things that get done to SMTP when we connect at the BedBug Inn ("Free wifi, administered by gibbons").
Secondarily, it would be nice to be able to connect to and browse some of the internal machines.
So here is what I did:
* Installed 10.4.10 Server on a machine with two ethernet interfaces, one that has a public IP address, the other connects into the private network. When I'm actually at that machine, things work fine - I can browse the private network shares, connect to the net, etc.
* Configured VPN. I have no problems getting a VPN connection, both sides are happy. The VPN assigns incoming clients IP addresses in the private network IP range, but outside those assigned by the wireless router's NAT.
* Added 192.168.2.1/255 (the private network) and 12.17.29.193/224 (the public network) to the Network Routing Definition box under VPN/Settings/Client Information.
However, here's where it all falls down. Once the VPN is established, I can't connect to any of the public machines, and the only private-side device that seems to respond is the Wireless/NAT box (A Belkin N1). So the only thing I can do is administer the Belkin remotely, which, while nice, is not exactly what I had in mind.
Doing a traceroute while VPN is active to my mailserver shows the first hop direct to the VPN machine, then off into * * * heaven (though I have no idea if traceroute works over VPN!).
One curious note: when I change the order of the Network Routing Definitions so that the public network comes first, and the private one second, I can't contact the Belkin box.
Any advice, oh wise and powerful masters of technology?
Various, but the server is running on a G4 Mac OS X (10.4.10)

I said:
"let's assume I VPN to the wireless box"
You replied:
"That's not correct as it is not the device running the VPN endpoint - in this case. "
But wouldn't I have to (on the VPN client) specify the public IP of the wireless box in order connect (because the packets are forwarded) to the actual OS X box running the VPN? Otherwise, it can't see it.
Part of the problem I have is that I can't dedicate a whole machine to VPN. The OS X machine running VPN is also running DNS, and will eventually run our mailserver and perhaps FTP, web, etc, as I slowly migrate stuff to it.
So this machine has to have a public IP address. It cannot be hidden behind the wireless NAT. And it seems to me that this is the crux of the problem. What I think you are telling me is that if the VPN machine was entirely hidden behind the wireless NAT, and had no direct public (WAN) interface, then since all the packets destined for the outside world (including my public servers)would have to go through the NAT, and all would be OK.
If so, then it seems to me that the best solution is to use something like OpenVPN on another OS X (not OS X Server, since I only have one of those) machine in the private network. Since the incoming VPN traffic will be Mac only, it shouldn't be an issue, L2TP-only is fine.
"Otherwise you have to run NAT and the firewall in the VPN server too and use private IPs for VPN clients - or use "only" it (remove the other NAT box and put it on the LAN only). Using only one device for NAT/gw means less configuration."
It is entirely unclear to me, in my setup, what effect turning on NAT on the VPN box (or perhaps, just IP forwarding) would have -- and if I do turn on NAT, would I still have the VPN assign IP's to clients in the internal private network's range, or would I use a different range (ie: private is 192.168.237.xxx, VPN assigns 192.168.239.xxx) and expect the NAT to handle the conversion?
I'm a bit leery of just trying it and seeing what happens because it if mucks things up so badly that the server becomes unreachable (via server admin), I'll have to schlep down to the office to fix it.
"Other things to consider is "bottlenecks" between your LAN and WAN."
Not a real issue. We have a small office, and a relatively small pipe to the internet. Most of the traffic from that pipe is from the public machines anyway. The traffic that goes through the wireless router is basically websurfing and hitting the mailserver.
I could, of course, use the VPN OS X machine as the NAT/DHCP server, and hang the wireless router off the internal network as a simple access point. But would that resolve all the VPN issues?
Once again, thanks for your helpful and prompt replies.

I need help configuring three products: WRVS4400N, WAG325N and WVC200

Hello,
I want your help in three linksys products as mentioned below:
WAG325N ADSL2+ Router
WVC200 PTZ CAMERA
WRVS4400N VPN Router
The computer connections and configuration of above linksys products which I am working with and which are connected with the above three linksys products at present are as follows:
1) I have one server and one laptop.
2) Laptop has two wireless adapters which I use to connect to the routers.
3) The server is connected to the WRVS4400N Router through one of the four ethernet ports mentioned on backside of the WRVS4400N Router. The DHCP of this router is disabled by me and the router's default IP 192.168.1.1 was changed to 192.168.1.12
4) The WRVS4400N router is connected to the Wag325N router for internet access to the server and server is connected to WRVS4400N Router as mentioned in point number 3 above.
5) The WAG325N router is setup as per the instructions mentioned that came with the CD of this router. The only change that I have modified is the router's default IP. I have changed the default IP of WAG325N from 192.168.1.1 to 192.168.1.13 and DHCP is enabled on this router.
The help that I want is step by step as follows:
1) I want to configure the both routers in such a way so that I can access them from anywhere across the world i.e. remotely using internet.
2) I have WVC200 Camera which I setup according to instructions mentioned in the CD and also configured the DDNS service. But when the " RJ45 Cable is connected " to my WAG325N router and Camera, then only the camera works properly. What I want is that after the setup is completed, I want to remove the RJ45 Cable connected from my camera to router and use the camera wirelessly from any location within the range of my above mentioned WAG325N router. I need flexibility to use my camera without cable connections from any location and any rooms of my house. I also configured the port forwarding and DDNS properly. The only problem is that if I remove the Cable after the setup of camera is finished, then the camera access is not working on LAN or internet(through DDNS). Whereas the same works on LAN and internet using the DDNS service, when the cable is physically connected to the WAG325N router. Also I want one more thing additionally other then this. I want to use this camera wirelessly by configuring the port forwarding options on both routers at a same time(i.e. simultaneously at once on WRVS4400N and WAG325N).
3) Now as two DHCP cannot work at a same time and as my routers are connected with each other, So I have disabled the DHCP on WRVS4400N. Here I need help so that DHCP can be enabled on both at a same time. Because if the DHCP is not enabled on WRVS4400N then I have to give IP to the server which is connected with server. If I enable the DHCP then there are two DHCP's at a same time on same network and thus problems occurs in internet access to the server. So, what should I do in such a way so that I do not have to give any IP to my server and set it to automatic.
4) This question is just for my knowledge so that I can use the above mentioned linksys purchases upto full extent possible in future. I want to know what is VPN and how is it usefull? What is the difference between VPN and VPN tunnel? How can VPN be used to access all my network resources connected with my server in the above situation where my server is connected to WRVS4400N which in turn is connected to WAG325N?
Thanks !
Sincerely
Kalpesh Sharma
+91-79-25351208
+919227435453
Ahmedabad, India.

for question number 1:
you said that your main router is WAG325N, for you to remotely access the 2nd router is for you to forward the IP addr [192.168.1.12] on your first router and change its management port of your second router that is located on either the security tab or the administration tab on its User Interface
to access your first router open and Internet Explorer and enter
http://[public IP addr]:[management port]
the PUBLIC IP or INTERNET IP is located on the status page of your router
to access your second router just change the management port to
ex.
http://66.77.88.99:8080 first router
http://66.77.88.99:8081 second router
for question number 2:
make sure that you have configured all wireless settings on both your camera and your main router WAG235N, once done save settings and power down your camera and power it back up.
for question number 3:
for you to enable DHCP on both routers your connection can go like so...
from a regular port of your main router going to the INTERNET port of your second router [this way you can enable DHCP on both routers]. INTERNET is no problem, your cesond router will be able to get connection
for question number 4:
VPN - Virtual Private Network
VPN tunnel -is/are connections from router to router [gateway to gateway]
VPN is used to connect a diff network on a diff location for you to have access to the shared filed [it is like a file sharing through the internet]
for you to be able to use VPN tunnel you have to connect to a different VPN router on a diff location. In that way you can get access to the other network

Help configuring webdav permissions

Similar Messages

Maybe you are looking for