Help Connect me phone adapter cannot detect phon...
Hi there,
I recently bought Freetalk Connect Me phone adapter through Skype website. When I hook up phone line, ethernet and wall line as instructed, the setup wizard successfully detect my internect connection. However, it cannot detect my wireless phone. I tried another wireless phone but it failed again. I try to replace my existing voip to skype so I'm pretty sure my phone works well. During the initial setup, I saw the red light goes to flashing green light while trying to detect my phone....then it goes to red and repeat again.
Does anyone have this problem before? I try to locate Freetalk customer service number, but they don't have one.
JJ
Plese also see this: http://community.skype.com/t5/Other-devices/Use-Your-Own-Phone-Device-Router-Based/td-p/123156
About Me You can also use a IP Camera as your camera for Skype video Example Instructions
Similar Messages
-
HT4061 cannot make phone calls, nor receive them
cannot connect to the internet, cannot receive phone calls or make them
try a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up.
If that doesn't work then contact your cell provider. -
Recently i unchecked the box i tune wifi sync and try to connect my i phone using the usb cable provided. Now my macbook cant detect my phone, help!! I cant sync my phone anymore....
The update did not do anything.
AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network. -
i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards
Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7. -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased > music > not on this iphone" it tells me "All of your available music has been downloaded to this device." However, my purchases are not yet downloaded to the iphone and not available to download. If I go to "purchased > music > all > recent purchases" it will show me the purchases that were most recent the last time I synced my phone, but not the purchases since then.
Any thoughts on how I can remedy this and make all of my purchased music available on my phone without requiring syncing?
iPhone 4So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver. -
I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side : -
Trouble w/Linksys WRT54G2 connecting w/Linksys Phone Adapter SPA2102
I am trying to connect my new VOIP phone adapter Linksys SPA2102 with my wireless router Linksys Cisco #WRT54G2 V1. I have DSL and previously had the wireless router connected with a Vonage Phone Adapter and everything worked fine. When trying to connect my new phone adapter Linksys(SPA2102) it does not work. It will work if I connect the new adapter directly with my DSL modem but will not work through my wireless router (WRT54G2 v1). I have turned everything off and restarted all products several times along with the PC and still no luck. The only way I can get my DSL to work with the new adapter is to wire it directly to the DSL modem. Everything worked yesterday prior to trying to use the new phone adapter. I hope this makes sense lol. This is not allowing me to use my laptop through the wireless router. Any help would be greatly appreciated. Thank you.
Jennyyou should try this -- it shows you how to configure wrt54g2 behind the SPA2102 because it is recommended that you put the SPA2102 directly behind modem for better voice quality
-
hi ive been given a second hand i phone but cannot connect it to i tunes i get a itunes error (OxE8000084). also cannot unlock phone thanks
This may help:
http://support.apple.com/kb/TS3221
Regards. -
Connecting PSTN line to SPA112 2-Port Phone Adapter
Hi,
Not sure if this question is right but can I use the SPA112 2-Port Phone Adapter to connect a PSTN line? What I want is, I should be able to choose a line and while making calls. Use PSTN or VOIP.
Please let me know if I am using a wrong device for my purpose.
Regards,
NaiduNo, it cannot, that device has FXS ports, no FXO ports
Includes two standard telephone ports, each with an independent phone number, for use with fax machines or analog phone devices
http://www.cisco.com/c/en/us/products/collateral/unified-communications/small-business-voice-gateways-ata/datasheet_C78-691106.html -
My iPhone recently broke so I was sent a brand new iPhone to replace it, however, since receiving this phone, I cannot access anything which was previously backed up onto iCloud from my last iPhone. Please help me!
If you are trying to restore to an iCloud backup, this has to be done during the initial setup process. If your phone is already set up, you will have to go back to Settings>General>Reset and tap Erase All Content & Settings, then go back through the setup screens again and when given the option, choose Restore from iCloud Backup (see image below). Be sure your phone is connected to wifi and your charger as this will take some time to complete.
Also, your replacement phone must be running the same iOS version or higher to restore to your backup. If you are running an older version of iOS than the device that was backed up, your backup will not be visible when you choose to restore to your iCloud backup. If this is the case, you'll have to update your replacement phone first. -
Iphone 3gs needs to restore as I cannot turn phone on but cannot restore as unknown error 2001 keeps coming up.
I have tried several times on different computers. Any help or ideas? ThanksHi there Katherine,
I have an article here that addresses this error code and can give you a few more troubleshooting suggestions for this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Can I use a FREETALK Phone Adapter with a online number without a landline? I've got a DSL internet connection*Virgin Meida Internet*
Dear Greatbritton2k1,
The FREETALK® Connect•Me adapter will allow you to receive calls from your SkypeIn online number as well as your land line number (there is no need to change it if you already have one). All that is required is a regular home phone (not a land line connection, but the actual phone set) and internet connection. You will also be able to make calls using your Skype Credit/Subscription. You will also be able to receive and make calls when the computer is off.
Hope you found this helpful!
Best regards,
Connect.Me Pro -
I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
Need help backing up 4s to pc since phone no longer connects to wifi
need help backing up 4s to pc since phone no longer connects to wifi
Here are the instructions for syncing via iTunes:
iTunes 12 for Windows: Sync iPod, iPhone, or iPad
Cheers,
GB
Maybe you are looking for
-
I am in the process of buying some form of simple gateway/firewall box for our network. Our primary needs are basic firewalling and UTM, and usable SSLVPN support. I am currently considering a SA520 or 540 for this role. I am trying to better underst
-
How to install Oracle AS JMS Adapter on Websphere (or any J2EE server)
Hi, We have a requirement in which the client wants to connect to the OC4J JMS running in SOA Suite (Oracle Application Server 10.1.3.4). They are using Websphere. We are exploring ways by which they can connect from Websphere application to Oracle A
-
How can i watch a show on apple tv that is on ipad2
I am wanting to watch a show that i have on the NBC app on my IPAD2 but i want to move it to my apple tv. Can anyone tell me what i need to do to get this to happen? The apple tv shows that it has access to my apple ID but i am not a computer guy so
-
Error: REPORT/PROGRAM statement missing , program type is I (include).
Hi, I have created a REPORT Program (Z Program) and also created a TOP INCLUDE. I am NOT using Function module. When I tried to syntex check the INCLUDE, system is giving following error: REPORT/PROGRAM statement missing, program type I (Include). Ca
-
Select all no longer working getting the character å
Good day guys. I think I may have hit a key combo that changed somethign on my comptuter. I am getting funny character when using the command key Example Select all shoulod be command + A what i get is å Copy command +v i get ç Past command + v i ge