Help connecting an LG phone using Blue Tooth to Macbook

Hello
I am having trouble connect ing my LG phone to my Macbook using Blue Tooth. I am using discover mode on booth devices, i get asked about the code number machine on each device, but on the macbook it says that there is a problem with my Audio Device and that I need to disconnect the headset,,I dont have one connected. Any help with this would be greatly appreciated. thnx

cheryllb wrote:
I can get them paired but when I select the lg device listed on my HTC phone it does nothing.  I want to connect them so I can transfer the pictures from my old device to my new device.
Hi Cheryllb,
Thanks B33, as you are correct that this cannot be done via Bluetooth transfer. There are, however, ways that Cheryllb can get this done. Cheryllb, do you have a memory card in your LG Voyager? If so, you can save the pictures to the memory card (just go through your pictures, highlight them, press Menu, then move to card or "external memory" is how it may be displayed). Then, you can remove the card from the Voyager and either use it in your new device, or transfer the pictures using a card reader and put them on your PC. 
To transfer Picture Messages from wireless device to PC: 
1.        Access photo from "My Pictures" and choose "Options."
2.        Select  "Move" or  "Transfer."
3.        Remove memory card and insert card and card reader in USB port.
4.        Go to your file directory on the PC.
5.        Transfer files to the folder of your choice.
If you do not have a memory card, you are able to connect your Voyager to a USB Cable and transfer the pictures from the device to the PC. Once that is done, they will be in a file. You can then hook up your new phone to the PC with it's USB cable and put the pictures on the new phone, by dragging and dropping that folder into the folder for your new device.
I hope this information is helpful and allows you to find a resolution to transfer your pictures from phone to phone. I do understand how important these pictures can be.
Thanks very much and have a great day! 

Similar Messages

  • Pcsuite problem connecting to the phone using blue...

    Hi,
    I'm having this intermittent problem, with my pcsuite not connecting to the phone.
    Most of the time it connects without any problem, but every now and then, I see the PC Suite tray icon with an X (phone unavailable).
    In those cases, when I open PC Suite, it only allows me the "Click here to connect a phone", with the drop list empty.
    When I scan for phones, it does find mine (ready to use), and continues to the "Connection setup complete" box, with an empty list of connections available...
    Note, in some of these cases (e.g.. now - while writing this message), I am connected (bluetooth) through the phone to the internet, so it's not that the phone is unreachable bluetooth-wise...
    Details:
    Windows XP SP3
    PC Suite v7.1.40.6
    Connection method: bluetooth
    Phone model: E72
    Thanks,
    Ilan

    Log out and in or reboot the PC. First start PC Suite and then connect the E72.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • My iPod is connected to my phone by blue tooth but it won't let me send things from one to the other what do I do

    My iPod touch is connected to my phone on Bluetooth but it won't let me sent things from one to the other and y won't adobe flash work I'm confused

    The BT profiles on the iPod only support pairing with headphones, speakers. keyboards and other iDevices via apps mainly for peer-to-per gaming. See:
    iPhone, iPad, iPod touch: Supported Bluetooth profiles
    Regarding Flash, read the following by S Jobs:
    Thoughts on Flash

  • Connecting to broadband network using blue tooth d...

    Is it possible to connect a N-93 or any N-series phone to broadband network of PC using bluetooth dongle installed in the P C. ? If yes how. If no why
    If my post has helped you please click the white star on the right

    Hi,
    Goodday.
    all hp which has GPRS/EDGE/3G are capable of connecting via ur pc. there r 2 ways,
    1. when u launch ur bluetooth on ur pc, there wud several option on what services u want to use. the internet connection shud be BLUETOOTH DUN CONNECTION. once u launchd it, ur required to enter the user name, password, and dial-up num. these 3 info need to be obtaind frm ur network provider. charges will depend on ur networks mobile data charges.
    2. if theres no such option, go to control panel>network connections>create new connection>connect to the internet>setup conection manually> connect using dial-up modem> select ur hp as modem> enter user name,password, dial up num>finish.
    then u'llbe able to connect to the net depending on ur networks speed.

  • Desktop manager wont find Phone thru blue tooth

    I need help.
    When I try to connect my phone using blue tooth to the desktop manager (4.6.0.1.2), it doesnt recognize it. In the options menu the blue tooth boxes are not accessable to check. I paired up my phone with my computer and that worked using the pass key where you type in the code in your phone then your computer. It then says connecting to local service then installing modem and the blue tooth icon illuminates next to the computer time briefly then goes out. I bypass the advanced modem settings screen and it wants me to add a dial up number, name and password. As I do not wish to use my phone as the internet connection I click finish. My 8700 now shows in the window along with my mouse and headset. When I try to connect my phone it attempts to connect by saying opening port then it trys to dial by using the *99 and non existant name and password. I then get the error message. With all this said, is there any way to just connec my phone without it trying to dial up first?
    Note: it does connect thru the usb cable just fine.
    Thanks

    Hi,
    You won't be able to transfer pictures and media through the desktop manager. It's main functions are backing up and syncing to Outlook yahoo, for contacts calendar etc. You can however sync through Bluetooth. (native drivers only)
    here is the link:
    http://www.blackberry.com/btsc/dynamickc.do?externalId=KB04132&sliceId=SAL_Public&command=show&forwa...
    As far as media is concerned the quickest, most efficient, and easiest way is to plug the USB into the PC and BB
    (IF you have a MEDIA CARD in the BB), it will come up as a flash drive under windows explorer.
    Then you simply drag and drop your media to the card. In Bluetooth transfer, the BB takes only one file
    at a time, which is why I suggest the USB able.
    There is a media Sync program that is very stable, and is a stand alone system here is the link:
    http://na.blackberry.com/eng/devices/features/media/mediasync.jsp
    Thanks,
    If you need more info please ask!  If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks     
    Message Edited by Bifocals on 10-31-2008 12:55 AM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Connect OfficeJet 100 mobile printer to iPad using blue tooth

    Trying to print from my iPad to the Office Jet 100 printer using blue tooth and not getting it set up correctly.
    Help
    Dryrot

    Hi,
    Unfortunately the printer is not e-Print enabled which means you cannot use the e-Print or AirPrint functionality which both work over wi-fi and not bluetooth.
    The IPad does not have any options for bluetooth printing. I've included a link here to printers that are web connected and support wireless printing.  
    There's a thread here that covers this issue also.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Hi,
    I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
    I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
    Hope it helped!

  • I updated my IPAD 2 to ios 7 and now it will not connect wirelessly or recognize my blue tooth devices

    I updated my IPAD2 to ios 7 and now it will not connect wirelessly or recognize my blue tooth devices

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Call volume low after using blue tooth

    I have an issue that I have not seen a response for.  After nearly 2 years of perfect use, my call volume (that is the sound of a caller's voice) is now too low.  The volume button on the side of the phone is at its peak (when I am on a call).  No water or other debris has gotten into the phone speaker that I can see.  The only think that did happen before this problem is - I had been on a blue tooth call in my car.  I have used this phone with blue tooth for over a year without any problems, but I mention this as it is the only think that I can think of that might have caused this glitch.  It is though the call volume is purposely very low and I thought that the blue tooth use may have caused this.  Any thoughts?

    It sounds like it is still connected.
    Try disconnecting it here:
    Settings > Bluetooth > Select the Durango and disconnect.
    If that does not work:
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

  • Why can't I charge Iphone 4S while using blue tooth

    When I go to charge my Iphone 4S in car while using blue tooth the sound stops.  What can i do to correct this?  Or is that jus the way it is.

    Requires the support of Bluetooth Profile A2DP, that's why. Your phone supports such, but it appears your hearing aids do not.

  • I am trying to connect 2 ipod touch via blue tooth. why is it not discovering another ipod via bluetooth?

    I am trying to connect 2 ipod touch via blue tooth. why is it not discovering another ipod via bluetooth?

    ashet8 wrote:
    I wanted to transfer songs.....
    See Here  >  http://support.apple.com/kb/HT1386
    What you can sync
    Applications
    Audio content—music, podcasts, audiobooks, and iTunes U content

  • Turbo will not AUTO CONNECT to my car's blue tooth.

    Turbo will not AUTO CONNECT to my car's blue tooth. I have to manually do it each time I get in my car. HOW DO I AUTO CONNECT IT?!
    thanks

    No, Hyundai Veloster.
    Funny, cause I did see the forum on a subaru.
    It's connecting... I just have to do it every time I get in my car. I had no problem with the razor connecting automatically.

  • Ipad connecting with vmware view client v5.1. "any way to disable or hide radial virtual keyboard mouse interface as using blue tooth external keyboard"

    Issue - ipad connecting with vmware view client v5.1. "any way to disable or hide the vmware view's radial virtual keyboard mouse interface" either in vmware view client settings, hidden cmds, or ipad system settings.
    My client is using an external blue tooth ipad metal cover type keyboard and does not wish to have the radial keyboard / mouse visable or floating on desktop when connecting to vm with iPad using vmware view client v5.1.
    i was unable to locate any settings or related toggle key/function combo keystrokes under iPad settings under vmware view client, to affect viewability of the radial keyboard/mouse. And can you kill it from service/process on vm instead of ipad? then dont allow service to restart at startup? What is the name of services that enable the radial virtual keyboard mouse - function to work?
    Thanks for any and all feedback-
    stratman1

    I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

  • HT204387 When I connect my Iphone 5C to Blue tooth it gets connected but only I can hear incoming voice. The called party cannot hear my voice. may i have the solution please.

    I have just bought this expensive phone. I tried connecting to Bluetooth car kit. It gets connected but only incoming voice can be heard. No voice goes out from Iphone.
    I also tried connecting to Samsung Bluetooth but the problem is same. There is only in coming communication and no out going.. But both the Blue tooth devices works fine with my Samsung SII.
    A working solution help will be very juch appreciated. Thanks in advance.

    I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
    I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

  • Connecting E 72 to Renault Blue tooth

    I have just changed my car to the latest Renault Megane with built in blue tooth
    E72 paired easily but constantly looses connection and re makes connection , it also freezes radio, I have consulted Renault dealer who is looking into it but has any one had similar problems with similar blue tooth problems with in car systems
    The E 72 is running with latest software update, And freezing of radio has only happened since up grade to new soft ware but connection has never worked properly since taking car delivery on 1st April  Any help appreciated

    Hi
    I've had my E72-1 for about a year now. I recently bought a Medion radio from Aldi, which has inbuilt bluetooth. It paired really easily, following the instructions. However, when I get back into the car it usually fails to pair again. The only way I've found to fix it is to delete the pairing on the E72, and pair the radio up with my old N78 (this works perfectly, and stays paired at all times). Once I do this, I can then re-pair to the car using the E72 as if it was a brand new device. It works for maybe the first 2 times of switching the ignition on, but then fails again.
    So, in conclusion I think that there is definitely a problem with E72 bluetooth, and like most of the other problems we report, Nokia will do nothing about it.
    Incidentally, the Medion radio is fantastic value at £50.00!!

Maybe you are looking for