Help connecting Macbook Air to network printer

Hi, i am having trouble connecting a HP OfficeJet 7612 to a Macbook Air running OS X Yosemite 10.10.2 (14C109).
The printer is connected to the router via Ethernet and the Macbook is connected to the router via Wifi.
When searching for printers through the HP Utility setup or just by adding a printer it does not show anything in the list of available printers.
There is an iMac in the office running Yosemite and that found the printer straight away, asked to download additional software and was working in minutes.
I can add the printer by IP address but i can only print to it. It says at the bottom of the window "Please note: An IP connection is supported. However, only the print feature will work properly." This is an all-in-one device and we would like to be able to use the scan feature on the Macbook.
Things i have tried already:
Uninstalling the driver, printer and software with the HP Uninstaller, this includes a "Reset printing system…"
Downloading and installing the latest drivers and software from the HP website.
Repairing Disk Permissions.
In the printers EWS chaning the Bonjour Highest Priority Service to 9100 Printing.
Disabling IPv6 on the printer.
Restarting the router and printer.
I personally feel it is not a problem with the printer but a problem with Network discovery / Airport settings on the Macbook
Any help would be really appreciated thanks!

Network Printer Troubleshooting

Similar Messages

Help connecting MacBook Air to Printer

I'm trying to connect to friend's printer (HP8600) - software installed on my MacBook Air, but midway into "reading" the doc, I get the message "Printer is not responding." Printer works fine on friend's PC. Suggestions?

Hello Rebecca Nordeman,
Thanks for the question. I understand that you are experiencing issues with a printer connected to your MacBook Air. The following resource may provide a solution:
Troubleshooting printer issues in OS X - Apple Support
http://support.apple.com/en-us/HT203343
Cheers,
Matt M.

How do i connect my MacBook Air to a Printer on my Wireless Network

How do i connect my MacBook Air to a Printer on my Wireless Network ? The printer is connected to a PC running Windows 7. That PC is connected to my Wireless Network. MacBook connects fine to Network, but can't find Printer.

Hi Kappy,
Thanks for your response. I followed your instructions (for Mac OS 10.6.7). It seemed to set up OK, but when I tried to print I kept getting the following Failure Message "Session Setup failed : NT_Status_Invalid_Parameter".
When I get the "Advanced Window" should I enter anything into the "Location" field ? Maybe I am not entering the correct Workgroup, Server or Sharename ? Is there a way to make sure all of that is correct ? I went on to the computer that the printer is connected to and verified all of that, but am not sure I looked in the right places.
When I print via my Home Network from another Windows 7 Computer to the same PC, it works fine. I just can't get it to Print from my MacBook Air.
I thought of using the IP Address. How do I find the IP address of the Computer that is connected to the Printer ? Is it what they call the IPv4 Address, or the IPv4 Default Gateway ?
Appreciate any help you can provide.

How to connect MacBook Air OS 10.8.2 to wireless HP Officejet all in one 4630 e printer

How to connect MacBook Air OS 10.8.2 to wireless HP Officejet all in one 4630 e printer

Greetings loschach,
Welcome to the Apple Support Communities!
I understand that you would like to set up wireless printing with your Mac running Mountain Lion. To complete this task, please read over and work through the instructions located in the attached article.
OS X Mountain Lion: Set up a printer to print wirelessly
Cheers,
Joe

My Macbook Air will not print wirelessly!

My Macbook Air will not print wirelessly using the connection between it and my iMac which is connected via USB to my Canon Printer. The iMac and the Air are both using the same network and the printer is found on the Air... it sits at idle, but when I press "Print" on my Air it never actually prints. There is just a flash of the print icon on the Dock and then it is gone... I am left with no reason or error message. My colleagues are able to print wirelessly with no issue using their Macbook Pro and the same connected iMac. Can anyone help with this?
Macbook Air: OS X 10.8.3
iMac: OS X 10.7.5
Canon Printer: ImageClass MF4370dn

Hi JDP86,
Thanks for using Apple Support Communities.
If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.
Use this article to troubleshoot printer issues in OS X.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Best of luck,
Mario

Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

I can't help you with a direct answer. For third-party devices you should contact the vendor (Vodafone).
If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

What is the best way to connect macbook air to present power point presentations

What is the best way to connect macbook air to present power point presentations

Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

Just purchased USB SuperDrive to connect MacBook air can't eject start up disc

just purchased USB SuperDrive to connect MacBook air can't eject start up disc? please advise

No, of course not. The "startup disk" is the disk with your boot volume (operating system) on it. Once you boot (startup) from it it is locked as your computer will not "run" without a valid "startup disk".
It would be similar to complaining that "I can't remove the engine from a running vehicle".

I am trying to setup bootcamp on my MacBook Air. Network diagnostics doesn't believe I'm connected to the internet... but I am!!???

I am trying to setup bootcamp on my MacBook Air. I have a wifi internet connection which works fine in Safari etc. However, when I get to the point of downloading the windows install files I am told the network is not connected, but it is!
I have a simple automatic connection set up to a wifi router which works fine for all standard internet functions - mail, safari, downloads in safari etc. Where it falls down is that the system doesn't recognise it in network diagnostics. When I reach the point of downloading win installation files for my air from the internet it says I am not connected to the internet and runs network diagnostics which proceeds to break my internet connection. If I stop network diagnostics, close the windows and simply switch my wifi off and on then I'm back up and running, but the network diagnostics still doesn't believe it.
Any ideas? Seems completely illogical to me...

This is the message I get if that helps anyone...

My MacBook Air won't print to my Ricoh network printer

MacBook Air running Maverick 10.9.5 won't print to network Ricoh Aficio MP c3500 printer. I've deleted, reinstalled, updated drivers - any ideas?

Have you sought help from Ricoh's tech support? Did you check for a newer driver for your model?
OS X- Printer and scanner software available for download
Printers not behaving? Reset them and start from scratch | MacIssues
Troubleshooting printer issues in OS X - Apple Support

HELP ME (Macbook Air + HP printer)

Im trying to connect a Macbook Air to a HP Deskjet 4480, it seems like its set up ok and it says that everything is working but when I try to print anything, the computer shows that its 'printing' but it doesn't what did I do wrong or what can I do??

First trick to try--try to print something. When the printer appears in your dock, click on that and bring up the printer window. Stop the attempted printing (erase the thing you were trying to print), go to where it you find lists printers that the computer can see and connect to. Now erase the printer--delete it. Then click on the + sign to add a printer. The computer should find the HP printer. Select it. Now that it's back, try again. See if that works.

Unable to connect my Macbook to a network printer

Hi,
My problem is specific to Canon iR2016 printer model which is connected to a router which in turn is connected to a wireless router. I want to connect my macbook pro to this printer, which somehow I am not able to.
Till now I have gone to "Print & Fax", clicked on "+" sign, then clicked on the "Windows" tab. There I can see the network printer listed. I select it, then asks for software driver or printer model. Now here I select Printer model, but my model iR2016 is not listed. Then I select generic Post script printer and Add. The printer gets added, but when I print, nothing prints. I also tried with generic laser printer option, but no luck.
Look forward to feedback.
Thanks.

Checking the Canon Australia web site the iR2016 lists UFR2 and PCL5e/PCL6 as supported print languages. Postscript was an option and given that the Generic PS did not work then it would be safe to assume that this option is not installed.
If you have installed the UFR2 v1.80 driver then you add this printer by selecting More Printers > Canon IP (UFR II). If you have installed the v2.xx driver then you simply select IP > LPD for the protocol. This then requires you to enter the IP address of the iR2016 and then you can browse for the iR2016 in the Print Using menu. However this is for a direct IP connection. You cannot use the UFR2 driver via the Windows share, which you mention trying.
So if the printer has its own Ethernet connection to the network then select to add the queue using IP > LPD, enter the IP address of the iR2016 and in the Print Using menu type 2016 to filter the list to the correct model. It should show UFRII in the name. Select this and you should be able to print.

My MacBook Air will not print wirelessly to my Canon Pixma MX410

I recently got a MacBook Air computer from work. I have not been able to set up the wireless printing at home via my Canon Pixma MX410 printer. I can get it to print from my MacBook Air if i connect it via USB. and I can get the Canon to print wirelessly from my personal Dell Laptop.
No matter what I have tried: Downloading the Printer Driver MX410 Series 106702.pkg
and still i get the same error.
The Printer is not Connected. I don't understand how that is, when i can still print from my other computer. There is some setting that i do not have correct on the MacBook. What do i need to adjust? I can't seem to find where it might be in the System Preferences. When i look at Network It show's i'm connected to my home Wireless Network. but i still am unable to print.
Please help.
Thanks!

As you can see here, that particular Canon printer is not supported by AirPrint:
http://support.apple.com/kb/HT4356
More importantly, these directions should help in trying to set up your printer.
http://support.apple.com/kb/HT3500

Linking Macbook air to lexmark printer

Can someone advise what I am doing wrong. Just bought macbook air and trying to link it to my lexmark printer x9575. Downloaded driver and works with usb connection but when I try to print worelessly, it does not connect to printer. Printer is on network and prints fine with other computers in the network. Mac is fine , wifi and internet etc all working, so why are they not linking up?

Hi there mernalmonster!
I have a couple of articles that can help you troubleshoot this issue with printing from your MacBook Air. First, make sure you have set up the printer properly by taking a look at the steps in the following article:
Mac Basics: Printing in OS X Mountain Lion & OS X Lion
http://support.apple.com/kb/HT4670
You may want to take special note of this line in the instructions as well:
Tip: If you want a Windows PC to use a Mac printer share to print, install Bonjour Print Services for Windows.
If you are still experiencing issues after double-checking your settings in the previous article, then you may need to reference this article about troubleshooting printing issues:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Help connecting Macbook Air to network printer

Similar Messages

Maybe you are looking for