Help- Connecting Macbook Pro 13" to TV with S video only

Hi guys,
So I am trying to connect my Macbook Pro 13" 2009 model to my Tv at home so I can watch movies. My Tv is a Phillips Plasma
and only has a S video and audio headset input available (no hdmi). My Macbook has a mini displayport input. I went into the
Apple store and they suggested buying a s video cable, an audio cable and a Mini dvi to video adpater, which I did. The adapter however
is not the right one and does not fit into any port on the computer. This is when I realised my Macbook has a mini displayport not a mini dvi port...
any suggestions on what cables I can use to get my Macbook hooked up to the s video??
Any help would be appreciated!
Thankyou!

Bring it back and start over.

Similar Messages

How to connect MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50

Any experience with cables for connecting MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50 (or similar)?

It depend upon the model (age) of you MBP. If you have a Thunderbolt or minidisplay port, then you will need a minidisplay/HDMI adapter.
eshop.macsales.com/item/NewerTech/CBLMDPHDMI/
Or you can get an all in one:
http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADYD O/ref=sr_1_3?s=electronics&ie=UTF8&qid=1361985588&sr=1-3&keywords=minidisplay+hd mi
If you have an older mac with a DVI port, you will need something like this:
http://www.amazon.com/DVI-HDMI-Cable-6ft-Male-Male/dp/B0002CZHN6
Note that audio is supported via HDMI for MBPs 2010 and later. Earlier ones require tapping the audio output port.
Ciao.

I have a macbook pro and the software with snow leopard only has upgraded to 10.5.8, do I need to purchase mountain lion to upgrade to 10.6.8?

I have a macbook pro and the software with snow leopard only has upgraded to 10.5.8, do I need to purchase mountain lion to upgrade to 10.6.8?

Your machine likely can't handle Mountain Lion 10.8 nor 10.7, if it does it will run slow and very higly likely a lot of your third party software and drivers for printers and scanners won't function anymore.
It's because your 10.5 era (or earlier) machine is rather dated, hardware has advanced and is faster, the newer OS X versions have gotten bloated.
I do recommend you call Apple via phone and order the 10.6.3 white retail disks, backup your personal data off the 10.5.8 Mac to a external storage drive and when the disk arrives, stick it in and run the upgrade installer.
Once that's finished, reboot and use Software Update to get to 10.6.8 and stay there. You can buy stuff from AppStore, just don't upgrade to 10.8 (or 10.7) as thats when you'll have issues.
10.6 should run your currrently installed PPC software and hardware drivers. But 10.7/10.8 will not.
10.6 is receiving security and other updates from Apple as more than 50% of OSX users are still on it.
Most commonly used backup methods
Things to consider before upgrading OS X

How to connect macbook pro to panasonic tv with hdmi cable

How to connect macbook pro to panasonic hd tv with hdmi cable

Hi m,
It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
This is if your MBP is from April 2010 or newer:
http://support.apple.com/kb/HT4241
First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

HELP! MacBook Pro cant recognise or burn DVDs but only CDs, and...

Hi all
I noticed that there many of you have the same problem, but I really need some advice here, my MacBook Pro cant recognise or burn DVDs but only CDs, well actually occasionally it does recognise the DVDs then it burn but cannot write (on Toast), also in many other apps, like iDVD or DVDSP, it does run well on the first part of the burning but then failed at the end, with all kinda diff error msg. I have tried using many diff brands of disc too, inc verbatim.
So I borrowed my friends external DVD writer (actually a cheapy one with no brand), when I tried to burn using the external then an error msg comes up and says the writer cannot recognise the disc.
I dont wana get the MBP to repair but just wana get a external DVD writer to solve the problem, cos i need to use my computer and dont have a replacement mac, but now I am worry if the problem i now having is a system problem or just hardware, not sure if it is because the DVD writer i borrow is cheapy so it doesnt cope with mac, or just my MBP have system error that cant burn DVDs...
But my MBP can burn CDs so it is not a hardware problem? and if that is a system problem so even I buy a new DVD writer wont solve the problem?
btw, I have tried many solving methods like rewriting permission, reset PVRAM, etc
PLSSSSSSSSSSSSSSSSSSSSSSSSS HELP

I'm having the same problem you are on my 2.4GHZ Core2Duo MBP running 10.5.2. It will sometimes recognize DVDs, sometimes not... it chuggs and clunks and then spits the disc out. If i re-insert it a view times it will show up on the desktop. I get failures from Toast as well as iDVD. If i keep trying i have been able to burn files onto a disc with the finder, but then the burner fails during the verification. If put the disc back in the contents appear to be correct (after a quick look). Burning CD-Rs seems to be working fine, that with the occasional DVD write seems to point away from the HW. I am trying with both Memorex DVD+RW and Verbatim DVD-Rs...
I have tried the command/option-PR reset combo with no luck.
Any ideas?
thanks,
-graham
PS the specific error i got from iDVD was: The error #-2147352539 was reported…
Message was edited by: Graham - Sonos

How to connect Macbook pro to a projector with the Mini Display to VGA adapter?

When I connect them nothings happens, the display has a blue screenshot for a few seconds and then get back to the normal view of my desktop. It's the same if I digit "cmd+F2"... Please help me.

The default method for adding a second display is called Mirroring. It uses a lowest-common-denominator approach to choosing display resolution, and often guesses wrong.
System preferences > Displays > ( Arrange) and drag the superimposed representations of the two displays away from each other to invoke "Extended desktop" instead. Then you should be able to set the resolution for the projector to a more reasonable one, and your picture should appear.

Problem on Macbook Pro (16GB RAM, i7) with large video files

Hallo,
I have a recurring problem working with Premiere Pro CS6 on a new Macbook. THe Macbook has16GM RAM, i7 processor and I have the video files on my internal disc. THere is enaough space on the disk, aprox 250 GB free.
I have a Canon Legria HF28. After loading the videos from the camara it's .MOV files. When I have files about 1 GB it seems to work fine. But if I have a large file, e.g. 1 hour HD video in 3,5 GB size, it loads the video, but the playback and any kind of edits does not work properly. Sometimes I am able to start the video, but it stops after a few minutes and I can't rewind or move forward. In the most cases Adobe Premiere crashes. But also restart or opening in new projects does not help. I wonder if somebody has similar problems. My understanding is, that I have enought RAM, and fast processor, that it should actually work fine. The video files are OK. As they run in Quicktime with no problem. Also moving back and forth in the video is fine in a simple player, but not in Premiere.
Any ideas? And thank you for your help in advance.
Thomas

My 2011 MBP can take 16 GB RAM. macsales.com sells the 16 GB kit for $160 currently. Apple tests against the more commonly available RAM types when publishing hardware limits, so only reports 8 GB as a maximum.
8 GB RAM is abut $50 through macsales.com, so buy the default 4 GB regardless of where you decide to go.

I want to use Final Cut Pro v 10 on my MacBook Pro and need advice with ram, video card or HD upgrade for optimal performance.

I currently have 8GB ram and the stock video card and an ssd HD 240 GB.

what Russ said…
ext.HDD, for simple AVCHD tasks, I would recommend usb3 too…
It's not state of the art hardware, but it's not chopped liver either.
LOL Thank, you, Russ for phrase-of-the-day!
<scribbling into my vocabulary book>

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

If possible connect my desktop (mac) with my MacBook Pro like secondary display with thunderbold

I wnat to connect my desktop (mac) with my MacBook Pro like secondary display with thunderbold (in the other side is working)

Hello edolillo,
It sounds like you are wanting to use your iMac as a secondary display for your MacBook Pro using a Thunderbolt cable. If your iMac is compatible, you may be able to use Target Display Mode, and this article outlines the requirements for it:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Target Display mode Requirements:
What are the requirements for TDM?
A Mac notebook or desktop with a Mini DisplayPort or ThunderBolt connection
A ThunderBolt or Mini DisplayPort cable
A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (21.5-inch, Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (27-inch, Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (21.5-inch, Late 2012)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (27-inch, Late 2012)
Thunderbolt to Thunderbolt
Thunderbolt
If your iMac model is supported, there are steps in the article to help you get that set up.
Thank you for using Apple Support Communities.
Take care,
Sterling

I am trying to connect my MacBook Pro to my TV with a mini display port to HDMI converter. Its not working. Any suggestions?

I am trying to connect my MacBook Pro to my TV with a mini display port to HDMI converter. Its not working. Any suggestions?

Depends on your model TV. Read your TV user manual. The newer models have "how to hookup" instructions for computer & games.
You can also do a forum search as well as a Google search.

Can't connect macbook pro to internet with airport extreme

Can't connect macbook pro to internet with airport extreme

If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
Tell me how the Airport is setup.. what broadband modem and router you have.
What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
Upgrade to Yosemite??

I have a 3rd gen Ipod touch and when i connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I connect this older iPod to my iTunes?

I have a 3rd gen Ipod touch. When I connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I make this older iPod show up on my iTunes?

Hi ChristianHelpplz,
Thanks for visiting Apple Support Communities.
It seems like your iPod touch is not recognized by iTunes on your Mac, but your iPhone 6 is working normally.
I recommend starting with these steps to troubleshoot your iPod touch and connection with your Mac:
Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Restart your device
Restart your iOS device or reset your iPod.
Restart your Mac
Turn your Mac off and back on.
Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
From:
If you don't see your connected device in iTunes for Mac - Apple Support
If you've tried these steps and your iPod touch is still not recognized, try placing it into Recovery Mode next:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
Jeremy

How do i connect my macbook pro to my tv with my HDMI cord with the adapter to a 32" panasonic vieja tv, how do i connect my macbook pro to my tv with my HDMI cord with the adapter to a 32" panasonic vieja tv?

how do i connect my macbook pro to my tv with my HDMI cord with the adapter to a 32" panasonic vieja tv?

get a minidisplayport to HDMI adapter found at http://store.apple.com/us?afid=p219%7CGOUS&cid=AOS-US-KWG
get a minidisplayport to HDMI adapter found at http://store.apple.com/us?afid=p219%7CGOUS&cid=AOS-US-KWG
get a minidisplayport to HDMI adapter found at http://store.apple.com/us?afid=p219%7CGOUS&cid=AOS-US-KWG

This month I just purchased a 27 Display with Thunderbolt. I have a 17 inch MacBookPro with the mini DisplayPort. How do I connect my MacBook Pro to the 27 inch Thunderbolt Video display.

This month I just purchased a 27 Display with Thunderbolt. I have a 17 inch MacBookPro with the mini DisplayPort. How do I connect my MacBook Pro to the 27 inch Thunderbolt Video display.

Mini-Display Port == ThunderBolt.
In other words, just plug it in.

Help- Connecting Macbook Pro 13" to TV with S video only

Similar Messages

Maybe you are looking for