Help connecting usb cable

when i connect my usb cable nothing happens.. isn't itunes suppose to open up and on the left hand side of my itunes it should say ipod or somthing. i also tried just opening my itunes my self when i connected the usb cable but my ipod doesnt even appear in my itunes. can anyone help?

Hi Illaass...I saw that but was putting the best construction on the statement that the lack of WiFi was due to a technical problem that might be resolved soon. Maybe I was reading too much into this and not thinking there was a really urgent need to connect. But, you are right, DB and email become problematic without WiFi...unless the OP could go to a Starbucks and email to the office

Similar Messages

  • TS1538 i cant connect my iphone to laptop. its nither charging nor connecting :( usb cable is okay .... can any one help ??

    i cant connect my iphone to laptop. its nither charging nor connecting usb cable is okay .... can any one help ?? pls...

    BOB we need you urgently
    Perhaps Bob will see this thread, he is the professor in these cases.
    You do not use a WEP password but wpa/wpa2 on router and equipment.
    All equipment connects to WiFi, but for your iPad.
    Even with all other equipment WiFi off, you cannot connect your iPad.
    Your iPad connects to other WiFi nets correctly.
    All resets etc done on iPad and Router.
    Still I am not sure it is your router for sure, frustrating...
    I want to test 2 other things:
    1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
    2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

  • Kernel Panic when I connect USB cable to use Rane Serato SL3

    Connect USB cable to use Rane Serato SL3 causes the following kernel panic. Used cable is an 5 meter USB-2 cable. This is 100% reproducable.
    Yes yes I know Rane does not officially support Mavericks yet however if I use another (shorter) USB-2 cable with the Rane Serato SL3 it's no problem. I also have an older Rane Serato SL1 and this device works (USB-1) perfect with the same 5 meter USB-2 cable and the same short USB-2 cable.
    I've taken the liberty to ask Rane what's going on and no succes there. They just don't seem to know.
    So you smart people over here, what's going on?  
    Here is the Kernel Panic:    
    Anonymous UUID:       944C81E9-22DD-96FF-FD1A-553E9CAD6B34
    Sat Nov  2 20:34:06 2013
    panic(cpu 4 caller 0xffffff800b8dc19e): Kernel trap at 0xffffff7f8debe166, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000e538000, CR4: 0x00000000000606e0
    RAX: 0x00000000e0000200, RBX: 0xffffff8025405000, RCX: 0xffffff800bf024b0, RDX: 0xffffff802d0add08
    RSP: 0xffffff80fcbc3d80, RBP: 0xffffff80fcbc3da0, RSI: 0x00000000000a0014, RDI: 0x0000000000000000
    R8:  0x0000000000000051, R9:  0xffffff800be01910, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
    R12: 0xffffff801ecc1800, R13: 0xffffff802d0add00, R14: 0xffffff8025405000, R15: 0xffffff7f8debe200
    RFL: 0x0000000000010246, RIP: 0xffffff7f8debe166, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x4
    Backtrace (CPU 4), Frame : Return Address
    0xffffff80fcbc3a10 : 0xffffff800b822f69
    0xffffff80fcbc3a90 : 0xffffff800b8dc19e
    0xffffff80fcbc3c60 : 0xffffff800b8f3606
    0xffffff80fcbc3c80 : 0xffffff7f8debe166
    0xffffff80fcbc3da0 : 0xffffff7f8debee0f
    0xffffff80fcbc3dc0 : 0xffffff7f8c13aadc
    0xffffff80fcbc3df0 : 0xffffff7f8debe2a9
    0xffffff80fcbc3e00 : 0xffffff7f8c13aa20
    0xffffff80fcbc3e30 : 0xffffff7f8c139634
    0xffffff80fcbc3e60 : 0xffffff7f8debbaf4
    0xffffff80fcbc3ea0 : 0xffffff800bcae4b3
    0xffffff80fcbc3f00 : 0xffffff7f8debaa62
    0xffffff80fcbc3f20 : 0xffffff800b84a15a
    0xffffff80fcbc3fb0 : 0xffffff800b8d6aa7
          Kernel Extensions in backtrace:
             com.apple.iokit.IOAudioFamily(1.9.4f11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@0 xffffff7f8c135000->0xffffff7f8c163fff
                dependency: com.apple.kext.OSvKernDSPLib(1.14)[744516ED-C05D-340F-9867-F5E89B2E8BE5]@0xffff ff7f8c124000
             com.rane.driver.sl3.10.6(1.3.3f1)[46AEB5AC-AD52-3F5C-9927-59ABE444B435]@0xfffff f7f8deba000->0xffffff7f8dec5fff
                dependency: com.apple.iokit.IOAudioFamily(1.9.4fc11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@ 0xffffff7f8c135000
                dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f8c19a000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x000000000b600000
    Kernel text base: 0xffffff800b800000
    System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
    System uptime in nanoseconds: 431507508429846
    last loaded kext at 426057833798866: com.sophos.kext.sav          8.0.14 (addr 0xffffff7f8dec6000, size 24576)
    last unloaded kext at 426034845418472: com.sophos.kext.sav          8.0.14 (addr 0xffffff7f8dec6000, size 20480)
    loaded kexts:
    com.sophos.kext.sav          8.0.14
    com.rane.driver.sl3.10.6          1.3.3f1
    com.regularrateandrhythm.driver.RowmoteIREmu          1.0
    com.eltima.ElmediaPlayer.kext          1.58
    com.Cycling74.driver.Soundflower          1.6.6
    com.serato.usb.kext          2.3.0
    net.osculator.driver.OSCulatorIOKit          2.1
    com.squirrels.airparrot.framebuffer          3
    com.squirrels.driver.AirParrotSpeakers          1.7
    at.obdev.nke.LittleSnitch          4050
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.kext.AMDFramebuffer          1.1.4
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleHWAccess          1
    com.apple.AMDRadeonX3000          1.1.4
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleMuxControl          3.4.12
    com.apple.driver.AppleIntelHD3000Graphics          8.1.8
    com.apple.driver.AppleIntelSNBGraphicsFB          8.1.8
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.kext.AMD6000Controller          1.1.4
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleThunderboltIP          1.0.10
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.driver.AppleIRController          325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AppleSDXC          1.4.0
    com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAcceleratorFamily          98.7.1
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleGraphicsControl          3.4.12
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.kext.AMDSupport          1.1.4
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
    com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
    com.apple.driver.AppleUSBMultitouch          240.6
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.driver.AppleThunderboltNHI          1.9.2
    com.apple.iokit.IOThunderboltFamily          2.8.5
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOEthernetAVBController          1.0.3b3
    com.apple.driver.mDNSOffloadUserClient          1.0.1b4
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1

    Most likely, one of these is the culprit.
    com.sophos.kext.sav          8.0.14
    com.rane.driver.sl3.10.6          1.3.3f1
    com.regularrateandrhythm.driver.RowmoteIREmu          1.0
    com.eltima.ElmediaPlayer.kext          1.58
    com.Cycling74.driver.Soundflower          1.6.6
    com.serato.usb.kext          2.3.0
    net.osculator.driver.OSCulatorIOKit          2.1
    com.squirrels.airparrot.framebuffer          3
    com.squirrels.driver.AirParrotSpeakers          1.7
    at.obdev.nke.LittleSnitch          4050
    Boot into safe mode (restart holding down SHIFT key). If no KP, then disable these, reenable one at time to determine which. If KP, then most likely hardware related. Run the Apple Hardware Test suite, extended tests at least twice, followed by Rember.  See
    OS X About kernel panics,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics,
    How to troubleshoot a kernel panic, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • Nokia N8 - Connect USB cable to device

    My new nokia N8 is constantly coming up with the message "connect usb cable to device".
    I'll click ok and 2 minutes later it will reappear.
    When i connect it to a usb, it disappears but will then reappear when i unplug. I've tried updating software but none is available, and there is no programs running on the phone.
    When i turn off and on i still get the same problem.
    Anyone know of a solution before i throw it against the wall?

    vvaino wrote:
    Ok,
    Have you tried the trick  you can find from the phone's
    manual; long press the on/off button (for 8-10 sec) until the
    phone vibrates three times? With this, you don't lose any
    of your information.
    -vvaino
    That's barely a trick
    it just kills the power to the phone and is esentialy the same as using the on off switch
    anyway as to the OP don't know
    you could try resseting the device  type *#7370# into the dialer,
    this will restore the phone to an out of box stateand you will loose all of your settings
    see if that helps

  • Need Help for connectivity USB Cable Nokia 5800 ca...

    Hi All,
    I really need help to solve my problems. I just bought nokia 5800 XM last week. I already installed the CD software in my windows XP, but it seems that PC cannot recognize the USB cables. I have plug in an unplugged... At firstime it detects my nokia 5800 XM, but when I open PC suite or OVI, it doesn't connect the USB cables into PC. I already install and uninstall The OVI suite but it is still the same, when I try it in OVI suite to detect my phones, it doesn't react.... I also have download from Nokia website to install manually Nokia USB cable driver for my  cable type CA-101... it seems nothing works here... tell me what should I do? I don't think that the USB cable I bought is fake, it has original guarantee..... please desperately need help! Anybody? 

    When you plug the phone into the computer, ON THE PHONE it should ask you which mode to connect in, and you should select "PC Suite" mode.  Does this happen?
    Ravi

  • Help About Usb Cable

    Dear Sir I Am Using Nokia 2690 When I Am Using Usb Cable To Connect My Phone Pc Is Saying Thar Usb Cable Not Recognised How To Sovle This Problem I Have Nokia Pc Suite I Tried To Connect With That

    Are you using the USB cable supplied with the phone or some other ?

  • Red light after connecting usb cable each time

    My ipod shuffle (4th gen) is weird and would not start. I know it's because someday I plugged out the usb cable right after I perform the sync task and forget to press the reject button first.
    Now the symtons is: It won't start / recharge, and it even doesn't show any light. Each time I connect it to the PC or AC adaptor, it will show RED light in about 5 seconds, and after few seconds there will be no light and it just dies.
    How can I fixed my poor faily new shuffle?

    Hey exkaede,
    Welcome to Apple Support Communities! I'd go ahead and try restoring your iPod shuffle to factory settings, so the software will be restored to its original factory condition with updates:
    Restoring iPod shuffle to factory settings
    http://support.apple.com/kb/HT1481
    If your computer doesn't recognize the iPod and it isn't appearing in iTunes, take a look at this document:
    iPod shuffle not appearing in iTunes
    http://www.apple.com/support/ipodshuffle/assistant/itunes/#section_0
    Best,
    David

  • Connecting USB cable to new iPad

    Is there a way of connecting a USB cable to my new iPad? I have a device that I want to connect to it but it is only supplied with a USB cable.

    I don't find this question too clear, but I'll try to answer anyway.
    " ... my new iPad?"  I wonder if that means the latest model iPad, commonly called the iPad 4.  If so, it has a lightning port on the bottom.
    " ... but it is only supplied with a USB cable."  What does "it" refer to ... is it the device you're trying to connect to, or is it the iPad?
    Anyway, your iPad comes with a cable that goes from its bottom port (presumably the lightning port, but maybe a 30 pin port if you're really talking about an older model) to USB.
    So the bottom line is you have a cable with your iPad that connects to USB.  The cable came with your iPad.

  • I Need Help Connecting USB Keyboard to my PowerBook G4

    I have a yamaha motif es6 but i also have logic pro 7 and i'm trying to link my motif es6 or connect it usb to my mac powerbook g4 laptop...i want to use the motif as a controller as well as a sound module,but i also would like to be able to play or sequence with my sounds out of the logic pro 7 but play the of my motif es6 keys...please help me somebody i really need you guys help! i'm very new with logic pro 7....am i alone out here/ did i buy a program that's to big for my own use??? !!!

    I have a yamaha motif es6 but i also have logic pro 7
    and i'm trying to link my motif es6 or connect it usb
    to my mac powerbook g4 laptop...i want to use the
    motif as a controller as well as a sound module,but i
    also would like to be able to play or sequence with
    my sounds out of the logic pro 7 but play the of my
    motif es6 keys...please help me somebody i really
    need you guys help! i'm very new with logic pro
    7....am i alone out here/ did i buy a program that's
    to big for my own use??? !!!
    You did get a Pro program. Here is what I would do.
    Panic. Just kidding, it sounds like your already doing
    that. Get a Belkin 7 port POWERED USB hub. This
    will let you plug your keyboard into the laptop and
    will not drain energy off the system. Price about
    40.00 Next download this LSO file here,
    http://storeandserve.com/download/338634/MOTIF%20ES%20Multi%20Logic%20MAC.LSO.ht ml
    This is a Logic song with a Motif ES
    multi instrument object already set up.
    This will allow you to control your ES6 from
    Logic when you want to use it as a sound module.
    What I would do with this is to open your autoload
    song then open this song. When Logic asks you if
    you want to close the first song say no. Then with
    both songs open go into the environment/audio layer
    of each song. In the song I sent you there is a
    multi instrument object called ES. Click on it so
    it is highlighted and use the command "command-x"
    to cut the object out of that environment and go to
    your autoload and using "command-p" paste it into
    the audio layer there. You can now close the song I
    sent you but when Logic asks if you want to save it
    select "dont save". This way if anything goes wrong
    with your autoload not taking the multi, it will still
    be in the other song. Next go here
    http://storeandserve.com/download/338606/LogicMulti.mov.html
    and download this video tutorial on creating a multi
    instrument object for an external synth in Logic.
    this will show you how to hook up your object in
    the environment so it will work. The creating
    part has already been done, you just have to
    hook it up and create the tracks for the 16
    midi channels. I did not do this until I had been
    using Logic almost a year. You are finding
    out what they meant when they said Logic
    has a STEEP learning curve!
    To control Logic with the ES, I believe if it
    is like mine you just hit the remote button
    and wham it is a controller. You can only use
    the board for controlling then, if you need it
    it to do other things you will have to hit the
    remote button again. Well, I hope this will
    help you, remember to install the
    Pro App Support Runtime file in the Apple
    support section if you havent already.
    Set up the ES in the Audio Midi setup
    in the Utilities folder and download the
    latest USB midi driver here
    http://www.yamahasynth.com/download/midi_driver.html
    I think that is everything. I hope this helps
    just post if you need more help.

  • Installing laserjet cp 1525nw software "connect usb cable now" but nothing happens

    My laserjet CP1525nw is connected by USB to my desktop PC and now I am trying to connect it to my laptop.  I get to the point in the install process where it wants me to "connect the product" but when I connect the USB cord to the laptop nothing happens.  My USB ports work fine for everything else and I have tried all three.

    Hey there rcbrehm,
    Sorry to hear you are having this problem. Here is a link to some troubleshooting that should help resolve your issue:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02124639&tmp_task=solveCategory&cc=us&dlc=en&la​...
    Make sure to let me know if you need further assistance after following the steps in the link above.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • E6 cant connect to internet via usb cable

    Hello,
    My phone is Nokia E6. I've installed Nokia Suite (v: 3.6.36)  on my pc.
    I connect usb cable to E6 and pc. Run Nokia Suite. And then I connect my pc to internet. I expect E6 will connect too but it's just not working. 
    Can you help me on this?
    Solved!
    Go to Solution.

    @rebulanyum
    Have you tried both via Bluetooth and USB connectivity as per this resource?http://www.nokia.com/hk-en/support/product/e6-00/troubleshooting/?qt=Modem&comp=nokiatroubleshooting...
    Happy to have helped forum with a Support Ratio = 42.5

  • Nokia 6233 does not notice any USB-cable

    I'm trying to upload some files from my phone to my computer. The problem is that when I connect USB-cable (ca-53, should be suitable with 6233) nothing appears on my phone screen. When I click the settings > connections > usb-cable, it only tells me "first connect the usb-datacable".
    So what should I do? The problem isn't in my computer, I've tested it with another usb connection.

    In that case, uninstall all Nokia related software and drivers with Revo, clean the registry with Ccleaner. Reinstall the latest PC Suite, turn off antivirus during install. Reboot the PC. Start PC Suite and then connect the phone in PC Suite mode.
    http://www.revouninstaller.com/revo_uninstaller_free_download.html
    http://www.filehippo.com/download_ccleaner/
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • HT201412 it shows itunes logo and usb cable with arrow after that it switch off itself

    iPAD shows itunes logo and usb cable with arrow after that it switch off itself

    If the Restore doesn't work, force your iPad into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • My iphone 5 verson 6.1.4 is not  recover just show usb cable pictur

    hi all my i phone is on recover mode stuck no cheng even recover from the pc massage appear iPhone 5  cud not restore the device cannot be found

    Try recovery mode, several times if needed.
    http://support.apple.com/kb/ht1808
    1. Turn off device
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to device
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected the device in recovery mode"
    8. Use iTune to restore device
    Note: You need to be patient and repeat the above many times to recover your device

  • WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" GETS OPENED.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECCT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT

    WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???

    Please don't shout!   Using all uppercase means shouting on the internet.  If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
    Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet?   Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network?  Or do you have other options?

Maybe you are looking for