Help connecting WII Console to Hub

Im trying to connect my WII console to my homehub via wireless and have followed the setup guide to the letter, ive also had the wii connected wirelesly before via my previous isp's router which was a sky setup...however after putting all the settings in and testing connection on the wii it will not then connect to the hub...any ideas please as we use the Wii for watching iplayer (well the missus does and my ears getting bent)
thanks

Well my daughter has a Wii, and there was no problem at all connecting. Just scanned for the network, entered the wireless key, and it just worked.
She has one of the old version 1 home hubs, so maybe it is more reliable.
As far as I can see, the problem was solved at the bottom of this thread.
http://community.bt.com/t5/BB-in-Home/WII/m-p/113917#M56367
You just need to ensure that any previous setting are totally deleted.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Can i hook a wii console to an hp touchsmart 300

can I hook a wii console to an hp touchsmart 300?

Hi Carolb6455,
I understand you are looking to hook your WII up to your HP Touchsmart 300. Here is a document on connections and what they do. I would consider HP Display Port to VGA Adapter.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02034609&cc=us&dlc=en&lc=en&product=5330114&tmp...
Hope this helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Wrt160n - set up with Wii console

new to the wireless router and wanting to set up my Wii console. but i am clueless. found a MAC address. not sure where to go from here.

Welcome to the Linksys forums, here is a tutorial for the Wii Wireless or wired set-up (see the link below).
http://us.wii.com/connect/
Please make sure that you have Flash Player installed, as this will be how it is viewed. It will walk you through step by step for wired or wireless connection.
If you have anymore questions please do not hesitate to ask as either I or another Linksys Volunteer will help you.
Have a good day and good luck

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I cant get my macbook (2008 model running 10.6.8) to connect to the home hub 5

to connect to the home hub 5 it connects eventually but is extremely tempermental... does anyone have a fix that doesnt involve messing around with the home hub settings...
for further notes, my dads macbook (same model but running 10.7) connects and works fine, as does the 2 windows desktop computers and laptops we have, my xbox and play station 3 consoles, my iphone 5c, ipad mini, my mums iphone 5, and my dads and sisters samsung galaxy note phones.... even as i type this i can kind of see the problem being with my macbook rather than anything else.... but if someone could give a solution that would be great =]

Howdy there SwipeatronSparks,
If your MacBook Pro still has issues when connecting to your hub, I would recommend the troubleshooting for the symptoms you are seeing in the following article, named:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thank you for using Apple Support Communities.
Regards,
Sterling

Please help with Wii

IF anyone can provide clear instructions to help get my Nintendo Wii online, that would be great. Here's what I have:
1. Wii
2. Airport Extreme (UFO shape)
3. Airport Express (helps extend network)
4. Various Macs (see signature below)
The Wii is on the second floor, the computers one floor below. I have the AP Express in the same room as the Wii, which helps the Wii see my network. When I go through the set up, I get the 51330 error. I have a 13-character WEP key. I read that if I started from scratch with the AP Extreme, it may work, but I have not yet tried it. I thought I would try here first.
Thanks in advance....

Took a while to sort out because I was not familiar with what a HEX key was...so, thought I would pass on a few more details.
Open Airport Admin Utility
Select your base station from your list
Click configure (this should open up a different window)
Click on the password icon if network pw protected
This will open up another pop up which will give you your HEX key equiv/WEP KEY
Enter the long key in the Wii internet settings
Wii should connect.
The steps above are what got me to success!

Attaching a Wii console to the 32DT2u Television

Can someone please tell me how to hook up a Wii console to the 32 DT2U television. The Wii does not use a HDMI cable. It has 3 RCA cables and a USB port. I was told by a "gamer" that the USB port will not work. Can't figure it out. Please help! Thanks.....

I had the same issue with bad image using composite video (red, white, yellow). I bought an aftermarket component cable for $4 which I could not get to work at all, probably bad.
As Peter the Toshiba moderator had posted, using the composite cable, plug the audio connectors (red and white) into the jacks on the right side of panel, and the yellow into the upper most on left (green) jack. THEN go into menu and select Video rather than colorstream. Contrary to the spec sheet from Toshiba, there is no separate composite connector on the 32DT2U, the component connectors seem to be switched by using the menu selection as described.
Below is little primer on component vs composite from Wikipedia, however keep in mind you will see very little improvement with the Wii using composite as it does not output an HD signal (which is why you need to select video), so be happy with the red, white, yellow cable.
http://en.wikipedia.org/wiki/Component_video

Tip connection using a usb hub

Hi,
I am trying to set up a tip connection using a usb hub.
I have the following in my /etc/remote file:
hardwire:\
:dv=/dev/term/0:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
I am getting the message "link down" when I issue the tip command.
any help would be appreciated.

Hmm, "tip" works with serial lines, and an "usb hub" is a device on an usb bus. There's a device missing
in your setup, an "usb serial port" device.
Another question: Where is the usb hub and usb serial port device connected? To an USB port on a PC?
Or an USB port on the Sun?

JAM Agent ERROR: Can't connect to Console 141.144.184.78:3600: Connection r

Hi
I am trying to connect to AD4j , but I am getting the following error during server start up.Please help me in resolving the issue.
JAM Agent ERROR: Can't connect to Console 141.144.184.78:3600: Connection refused
JAM Agent: Port is 62751
Pandu

Check accessibility of ports 3600 and 62751 if you have a firewall

Cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy.

cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?

Try restarting your WiFi router by removing power to it for 30 seconds.

Can' get online with my desktop even though my computer shows it's connected to the super hub

My desktop is showing it is connected to the super hub, but it cannot go online. Each time I try to open a safari window, it shows me that I'm not connected to the internet.
The hub has been changed by the provider and the signal strength is normal.
What do I do?

Did all the above and it still isn't going online...
What did you do? If you can give more info it'll be easier to try and help.
How are you connecting to the hub - ethernet cable or wifi?
If it's wifi, and it's a new router, is the Mac seeing the wifi network to join,
and have you input the new wifi password the router almost certainly has?
I note that all other devices are connecting so this probably isn't the case, but is MAC address filtering enabled on the hub/router - it can block connections. If this is the case, you need to either turn it off in the router settings or press the 'association' button to put it into pairing mode for a few minutes while you get it connected.

How to Connect Wii and Xbox360 wirelessly with SBC Home Portal

Greetings. Need help on hardware to connect Wii and Xbox360 wirelessly to SBC Home portal modem. Distance between connect points are about 50 feet plus and separated by floors and walls. What would work to acheive the connection? Thanks in advance for the help.
Sparrky

Configure the X-BOX & WII using the wireless connection same as in wireless router .....
Check the connections status on both the devices & see if you are online or not ....

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Problem connecting to SAP Open Hub

Hi, I am trying to set up a SSIS job  connecting to SAP Open Hub and have with support from the SAP guys been able to get some progress, but it has now stopped up on a error message we're not able to solve. Any suggestion on what can be wrong and
how to solve this? When I run the package I get the following error message:
SSIS package "D:\Source\MSBI\SapLoadStaging\Package3.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, SSIS.Pipeline: Execute phase is beginning.
Information: 0x3E8 at Data Flow Task, SAP BW Source: Process Start Process, variant has status Completed (instance DH88PUV2SZBIFKMIF48K3USME)
Error: 0x3E8 at Data Flow Task, SAP BW Source: Process Data Transfer Process, variant /CPMB/HMIJYDZ -> ZOH_VPL has status Ended with errors (instance DTPR_DH88PUV2SZCA46Y9QNO66A6W6)
Error: 0x3E8 at Data Flow Task, SAP BW Source: The component is stopping because the Request ID is "0".
Error: 0x3E8 at Data Flow Task, SAP BW Source: No data was received.
Error: 0xC0047062 at Data Flow Task, SAP BW Source [41]: System.Exception: No data was received.
   at Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceOHS.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
   at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper100 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer100[] buffers, IntPtr ppBufferWirePacket)
Error: 0xC0047038 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on SAP BW Source returned error code 0x80131500. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Information: 0x40043008 at Data Flow Task, SSIS.Pipeline: Post Execute phase is beginning.
Information: 0x4004300B at Data Flow Task, SSIS.Pipeline: "OLE DB Destination" wrote 0 rows.
Information: 0x40043009 at Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task
Warning: 0x80019002 at Package3: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "D:\Source\MSBI\SapLoadStaging\Package3.dtsx" finished: Failure.
The program '[6916] DtsDebugHost.exe: DTS' has exited with code 0 (0x0)
Regards
Paal

Hi Paleri,
According to the
thread which has the same error message, the issue may be caused by incorrect RCF settings. Could you double check your RCF connection configurations such as DNS settings?
If it is not the case, please also make sure you have installed the correct version of Microsoft Connector for SAP BW.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/e2fbafe5-d9df-490a-bfad-3d4b9784a8ea/sap-bi-connector-for-ssis-2008?forum=sqlintegrationservices
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

Help connecting WII Console to Hub

Similar Messages

Maybe you are looking for