Help Connecting

I am using a MacBook Pro with 10.6.2 and cannot connect or create a new database connection. I have read the installation guide and followed the instructions to the letter. Is there something i am missing? Is it compatibility?
I have considered downgrading to 10.5.5 thinking it will possibly solve the issue?

>
... cannot connect or create a new database connection
>
Pl post detailed error messages, preferably using cut and paste. What/where are you trying to connect to ?
>
I have read the installation guide and followed the instructions to the letter
>
What have you installed ? Pl post full version of the installed software.
The more details you provide, the better the quality of the help.
HTH
Srini

Similar Messages

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

Help connecting wireless printer

I have a hp deskjet 3510 i had it prviuosly hooked up to an old router and old computer and never had any issues .. now i have moved hve a new router and new hp computer and i can not get my printer to print at all I have tried to connect it using the wifi protected setup pressed the button on the router and the printer just says it timed out tried the pin too .. nothing ...tried usb ... nada even tried the disk that came with printer cant use it cause now i have windows 8 .. lastley went on hp website and downloaded something that didnt work .. finally figured id use eprint and that still dosnt work screen pops up on computer that says printer needs your attention go to desktop ... i know theres nothing wrong with printer because i can print using phone or ipad ...PLEASE HELP

Hi @jfontana33,
Welcome to the HP Forums!
I see that you are needing help connecting your HP Deskjet 3510 to your wireless network running Windows 8. I am happy to help!
I would recommend to take a look through this guide on printing. Print Jobs are Stuck in the Print Queue.
Hope this guide helps, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HT4199 I need help connecting to my WIFI. I purchased a new router and am having trouble connecting.

I need help connecting to my WiFi. I purchased a new router and am having trouble connecting.

your gonna want to contact your internet service provider for the best info on setting that router up. but for connecting to wifi on the iphone, ipad, and ipod
go to
settings > wifi
then choose your connection and enter the password

Need help connecting to my home Wireless Network

I need help connecting my LaserJer M1212nf MFP to my home wirless network. I would like to use Apple's AirPrint, and be able to print from my iPad.
I've spent a few hours following the directions I found on the manuals through hp.com and I've had no luck. I've already unistalled and reinstalled the printer. I've also updated the firmware. If anyone can provide assistance I would greatly appreciate it. Thank you!

This is NOT a wireless printer (see product spec: http://www.shopping.hp.com/shopping/pdf/ce841a.pdf), you can NOT add the printer to the wireless network. This printer do support LAN connection, so if your wireless router has LAN ports, you can added it to your home network by connecting a network cable from the printer to a LAN port on the router. You need then reinstall the printer as a network printer, to use airprint.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

I need help connecting my iPhone and computer together.

I need help connecting my iPhone to computer

Howdy sprinklemk,
Welcome to Apple Support Communities.
Take a look at the iPhone User Guide, it answers your question about how to connect your iPhone to your computer and provides additional information that you may find helpful.
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 18.
To use iPhone with your computer, you need:
An Internet connection for your computer (broadband is recommended)
A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:
OS X version 10.6.8 or later
Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later
Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin the other device.
Cheers,
-Jason

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealth

Hello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don

HT1386 Pleae help connecting my iPhone4 5.1.1 to my laptop with error 0xE8000012, I tried the the mentioned steps in this regard, but hopless.

Pleae help connecting my iPhone4 5.1.1 to my laptop with error 0xE8000012, I tried the the mentioned steps in this regard, but hopless.

If you have some idea where the problem might be, you can get finer-grained control over what goes into the error log by setting nsslapd-errorlog-level appropriately. For the settings, see http://docs.sun.com/source/816-5608-10/config.htm#140331

Help connecting an airport extreme

help connecting an airport extreme

Unfortunately, it appears as if a major portion of your post must have somehow been lost when you posted your question. All that we got was....
help connecting an airport extreme
We received no information about any of the following:
1) The make and model number of your modem
2) What kind of computer or device you are using to configure the AirPort Extreme
3) What operating system your computer is using
4) What service(s) that you want the AirPort Extreme to provide on your network
5) What configuration steps you have already performed
6) What happened after each step
If you could re-post with this basic information, one of the experts here will be able to help.

Help connecting Canon iR-ADV C5030/5035 to Mac

Help connecting Canon iR-ADV C5030/5035 to Mac
When adding this printer via IP, 'Windows' and also the advance tool everything seems to work correctly. Once printing it goes through as if it has printed yet nothing comes out. As if it isnt communicating with the printer. Have also downloaded drivers from the canon website for the printer for mac.
Adding another cannon printer (Canon iR C3200 PCL) the same way works fine and am able to print from this printer.
Any ideas or suggestions to help solve this problem?
Thanks

With Dept ID enabled, you need to open Printers & Scanners, select the C5035 printer in the list and then click on Options & Supplies. Then select the Utility tab and then Open Printer Utility. With the Canon utility open you will see the Printer Information button. Press this to open the Printer Information window that will confirm Dept ID Management is enabled in the copier as shown below.
Click OK to close the Printer Information window and then enable the Dept ID setting and enter your Dept ID and PIN. You will have the option to verify that your ID / PIN is correct and select not to use Dept ID printing when printing in B&W only. With the settings entered press the Save Settings button and then Quit the Canon driver utility.
Now open a document and select to print. Change the print dialog to Special Features and ensure that the Dept ID Management setting is enabled as shown below. You can also press the Settings button to check that your ID / PIN is set and you can verify it works. If all is good then see if you can print from this Mac.

Dw cs5 with existing wordpress site hosted on yahoo need help connecting to existing remote database

I am having trouble establishing a database connection. I can connect with test databases but am having trouble using dreamweaver wtih my existing wordpress website. Am I able to use dreamweaver to edit and live view my changes before uploading the changed files to my live site? Am I able to access my existing wordpress database with dreaweaver? I have imported it to my testing server/database but still seem to be having trouble establishing a connection with it (think maybe my folder hierarchy might be off).
macintosh HD/Applications/MAMP/htdocs/nwm/wp/index.php
"nwm" is the name of the folder that I have copied all of my site files to and the folder I have dreamweaver pointing to. "wp" is what I have all of the wordpress files in (the ones I copied from my yahoo server - including all my current theme files etc.)
I am trying to put the info into the mysql connection dialog box:
Connection Name: Testing (i am assuming this name is for my benefit only and doesn't actually matter)
MySQL Server: mysql
User Name: *****
Password: *****
Database: wp
and am getting this message
MySQL Error#: 2013
Lost connection to MySQL server at 'reading initial communication packet', system error 61
did some google seaches of the error. Tried turning off the firewall, and the advance tab allow mysql incoming (there were 2 one was allow one was not allow. I changed both to allow)
Cant really find anything on yahoo to help me out. Looked in phpmyadmin database named wp: wp_users to get the username and password (which due to previous look for help - I think the password was encrypted cuz it looked like a bunch of mumbo jumbo and am fairly certain I know the correct password).
Any help would be greatly appreciated!! I spent $50 on live chat last night trying to resolve the issue only to find out at the end that the guy really didn't understand my problem and doesn't have dreamweaver. I have also watched countless videos on Lynda.com and have been thru forum after forum. While this problem is only a couple weeks old since I just got CS5. I have been having trouble making any headway learning php since I cant seem to make it past the set up parts. I have done the php / mysql essential training on lynda.com with relative success except that I really dont want to work with any more exercise files so I didn't go on to the beyond the basics. I recently went thru most of the Dreamweaver CS5 and Wordpress 3. Also did the first 4 chapters of Dreamweaver CS5 with PHP and MySQL. I need to start integrating things into my live sites. I am also trying to work my way thru the learning php, mysql, javascript book by o'reily media by robin nixon (as fun as reading a math text book) can't get thru it since I can't relate any of it to my current sites/needs
I am on MacBookPro OSX 10.6.6
Installed MAMP to specification on all 20 tutorials I have tried including lynda.com
Tested the testing server and is working
Just installed dreamweaver cs5
have been using wordpress online to create and edit posts (recently upgraded to 3.? whatever the latest update was online which I believe update the files on my yahoo server?)
Have also installed wordpress on my computer (several times thru each tutorial trying to get this right.)
Am I expecting the impossible?

If wordpress controls it's own connection why am I unable to use the live view. I have synced the remote site to my local computer so all the files should be just as they are online with the exception of the DB which contains most of the content.
I have done all of those steps. I have even exported the database from inside internet phpmyadmin and imported into computer phpmyadmin. When I hit live view I get one of couple of errors.
1. "One is that the dynamic related files could not be displayed due to an internal server error"
At some point I was able to view some sample files inside dreamweaver. But I would like to be able to view my real site files. I was able to "connect" to the local databases (not the copy of my real one - I think that maybe that was because it is somehow nested inside another db an am going try to reimport to new location). And then I changed the host/username/password trying to deal with the internal server error. Now instead I get the cannot connect to the database Error 2016 or whatever from the origianl post. Also, I am using yahoo if that matters and all I can find about what their server name is: mysql - is that correct?
I have been thru this so many times with so many different tutorials I am losing track of what is what.
2. Can I access my remote database within dreamweaver? I do not want to create dummy files (seems to be a waste of time). And while if it had worked exporting/importing a duplicate on to my computer would have satisfied me for a little while it also seems some what counter productive. Since every post and page is different if I were doing a daily updates etc how would I be able to change the formating or design of them if I can't access the remote files. Would I re- import everytime I want to work on it to get current database?
I am trying to be clear. I listed all the specs I could think as listed in your "how to get help fast post" (yes I read that at least twice too) of all of the steps and possible reasons for my problems. I also thought that the forum was on a seperate site so I didn't think it would count as a duplicate. I am frustrated to tears and am feeling incredibly stupid that after all this time and all these tutorials yes you are right I obviously am not understanding what is going on which is why I am on this forum.

Help: Connecting Tomcat to CA-IDMS Using JDBC Type 4 Drivers (JNDI)

Hi there,
I have a rather interesting / complex problem......creating a connection to CA-IDMS from Tomcat using JDBC type 4 drivers (CA provide the type 4 driver).
We have a zSeries 9 IBM mainframe running CA-IDMS r16.1, and I need to connect to the IDMS from Tomcat (running on Linux) using the JDBC Type 4 drivers provided by CA.
At this stage I am struggling with the actual setup and configuration of Tomcats server.xml and web.xml files. These are the files where the JDBC configuration is set (I think). I have to setup the CA-IDMS part of the configuration, but that is a different problem. Basically there is a TCP/IP listener on the IDMS, waiting for incoming connections from the JDBC type 4 driver.
I set up a Tomcat to MySQL connection using MySQL Connector / J, which is a similar kind of process to what I am trying to achieve with IDMS. MySQL connector / J came with a jar file which is placed in Tomcats lib folder, and then the JDBC setup for the web application is created in Tomcat's server.xml and web.xml files. You can then connect to the MySQL database using JSP and the configured JDBC driver / connection. The CA-IDMS Server comes with an idmsjdbc.jar file, which I think is the JDBC typr 4 driver. I think it needs to be placed in the Tomcat /lib folder, but I dont know how to set up the configuration.
There is a JDBC DriverManager which allows JDBC drivers to connect to CA-IDMS. The DriverManager recognises the following syntax:
jdbc:idms://hostname:port/database
This allows the JDBC driver running within Tomcat to connect to the IDMS which is running on the IDM mainframe. CA IDMS r16 supports direct connections from the Type 4 JDBC driver to the Central Version on IDMS. "hostname" is the DNS name or IP address of the machine where the CV is running, and "port" is the IP port that was specified for the listener PTERM (setup on the IDMS side).
There is a caidms.properties file for the JDBC driver, which is used to specify user ID, password, and optional accounting information. It can also be used to specify physical connection information, allowing an application to connect to a CA-IDMS database without requiring the definition of an ODBC style data source. However, I dont know where to place this file within the Tomcat setup.
There is also an IdmsDataSource class. I dont know where to configure this or how to set it up; the CA-IDMS Server manual states the following:
This class implements the JDBC DataSource interface. It is used with an application server (Tomcat) providing Java Naming and Directory Interface (JNDI) naming service to establish a connection to a CA IDMS database. IdmsDataSource properties conform to the Java Beans naming conventions and are implicitly defined by public setter and getter methods. For example, the description property, which is required for all DataSource implementations, is set using the setDescription(String) method. The application server may use the java.lang.reflection methods to discover DataSource properties and provide an interface to set them, or may simply require that they are defined in some configuration file. IdmsDataSource properties are used to specify the connection parameters. These properties are the equivalent of the DriverPropertyInfo attributes described in the previous section and can be used to completely define the parameters needed to connect to a database. Like a URL, an IdmsDataSource object can also reference an ODBC style data source name, where the connection parameters are defined in the configuration file on Linux.
Is there anyone that can try to point me in the right direction to setting up the JDBC connection? I am totally new to Java and so the instructions are not making much sense at the moment. Any help, hints, tips..anything will be greatly appreciated as I have just hit a brick wall here. I can't find much to do with setting up the CA-IDMS Server JDBC type 4 driver online either....if anyone can point me to some resources that would also be extremely useful.
Kind regards
Jp

You say you've managed to get the JDBC driver working
in an application but not in a JSP. You also say that
the error you get is
"com.microsoft.jdbc.sqlserver.SQLServerDriver".
I'd be willing to bet that the exception that you have
got is a ClassNotFoundException. I.E. your application
server hasn't found the JDBC driver classes. The
application server probably doesn't use your current
CLASSPATH to look for classes. It will be setup within
the application server in some way and you'll need to
check your app server documentation to see how it is
done.
Try replacing
e.printStackTrace();with
e.printStackTrace(out);to get a full stack trace of your error.
ColTried it. Got this error when I tried to run the JSP.
Incompatible type for method. Can't convert javax.servlet.jsp.JspWriter to java.io.PrintWriter.
e.printStackTrace(out);
I'm currently using Apache Tomcat 4.0.3 as my JSP/Servlet Container.
I'm also using Type 4 MS SQL Server 2000 JDBC driver version 2.0 on my NT4.0 Server.
Do I need to set my JDBC driver in my container? if so, how do I do that?

Help Connect my Mid-2009 Macbook Pro to my new YAMAKASI CATLEAP Q270 SE 27" LED 2560X1440 WQHD DVI-D Dual Computer Monitor

Hi,
I am trying to connect my Mid-2009 Macbook Pro to my new YAMAKASI CATLEAP Q270 SE 27" LED 2560X1440 WQHD DVI-D Dual Computer Monitor. I am not having a lot of luck.
My machine:
OS: Mac OS X Lion 10.7.4 (11E53)
Graphics Card: NVIDIA GeForce 9400M 256 MB
Processor: 2.53 GHz Intel Core 2 Duo
I am trying to connect it using the:
Mini DisplayPort to Dual-Link DVI Adapter
DVD-D HDMI cable
YAMAKASI CATLEAP Q270 SE 27" LED 2560X1440 WQHD DVI-D Dual
(http://www.ebay.com/itm/150788045871?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m149 7.l2649#ht_16597wt_877)
Here is what is happening.
1. I connect the Mini DisplayPort to Dual-Link DVI Adapter + HDMI Cable to Monitor
2. Main monitor powers up like it is trying to display
3. Laptop Monitor displays second part of desktop
4. I can never get the Yamakasi to display a picture
Here is what I have tried:
1. Different HDMI-D cables
2. ATLONA AT-DP400 Dual Link DVI to Mini Display Port Converter
3. Zapping the P-Ram
4. Powering monitor with laptop closed
5. Forcing the system to see the second monitor
The nearest I can figure:
- The laptop does see the catsleap (it displays resolutions I can set it to)
I am completely stumped, I was hoping someone could advise me.
Thanks,
Don

Hey Kytarx,
I found the winning combination this weekend.
I tried:
- Apple Mini DisplayPort to Dual-Link DVI Adapter
- ATLONA AT-DP400 Dual Link DVI to Mini Display Port Converter
- Monoprice Mini DisplayPort | Thunderbolt® to HDMI®, DVI & DisplayPort Adapter
My experience:
- Altona didn't work at all, and their support claimed it would not.
- Monoprice didn't work to Dual DVI, it did work to HDMI (great price I wish it did)
- Apple Mini Displayport adapter did work, but would only work with certain USB + Display port combos.
The thing that was tripping me up was that two of the Dual DVI-D cords were bad. Once I found the working cord, it was easier to find the working adapter. The experience I did find to be a frustrating / expensive one. However, the Monitor itself is beautiful.
Hopefully this helps someone else..
Don

Help- Connecting Macbook Pro 13" to TV with S video only

Hi guys,
So I am trying to connect my Macbook Pro 13" 2009 model to my Tv at home so I can watch movies. My Tv is a Phillips Plasma
and only has a S video and audio headset input available (no hdmi). My Macbook has a mini displayport input. I went into the
Apple store and they suggested buying a s video cable, an audio cable and a Mini dvi to video adpater, which I did. The adapter however
is not the right one and does not fit into any port on the computer. This is when I realised my Macbook has a mini displayport not a mini dvi port...
any suggestions on what cables I can use to get my Macbook hooked up to the s video??
Any help would be appreciated!
Thankyou!

Bring it back and start over.

Help Connecting

Similar Messages

Maybe you are looking for