HELP: Connectivity locked up problem
Firstly I am sorry about I don't know this is the right place to post this thread...
I have a Nokia 5800 Xpressmusic. And I have a problem with it. When I tap into "Menu-Settings-Connectivity" and try to exit from there my "Settings" menu locked up. It shows that "Settings" menu always running background. And I can't tap anymore "Settings" menu until restart my phone. How can I resolve this problem?
I write my step by step and i attached two pictures to understand my problem easily.
And please replace extension to jpg from txt.
1) I tap menu button and it opens menu. (picture 5800mainmenu.jpg) but for now ignore red circle in the picture.
2) Then I tap "Settings" from main menu and it opens settings for phone (picture 28.jpg)
3) Then I tap "Connectivity" from settings menu and it opens another menu. (I couldn't attach third picture. sorry for that)
4) I tap "Exit" from "Connectivity" and it don't. It partially locked up. I mean i can't use "Settings" menu if dont restart my phone. It always show busy "Settings" menu like in picture 1 that marked with red circle.
I hope it would be more understandable...
Attachments:
5800mainmenu.txt 82 KB
28.txt 43 KB
Similar Messages
-
hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed
-
Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.
Hello,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
If that doesn't work try changing channels on your Router. -
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!
Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?
-
Dear Apple
I buy a refurbish iPhone 5s the IMEI ******** and ICCID ********** and i restored the device when i restored its locked to iCloud and i don't know the username and password i hope to help me about the problem asap.
Best regard
<Edited by Host>This is a user forum. You aren't talking to Apple here.
Return your iPhone for a refund. There is no way to remove the Activation Lock. Apple won't get involved.
<Edited by Host> -
I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.
-
hello i am trying to update my phone . i am connecting it to itunes but it is giving error 3194 . can you help me resolve this problem please.
Hi ali hakim,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
http://support.apple.com/kb/TS4451
This occurs when iTunes is unable to communicate with the update-and-restore server (gs.apple.com). This is most likely because it is being blocked, redirected, or interrupted by security software, hosts-file entries, or other third-party software.
Cheers,
- Judy -
Today my iPod touch 4 generation was dropped. now it just has a white screen. i tried reseting it by clicking the home and lock buttons but nothing helped. what is my problem and how do i fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My MacBook Pro has been wiped and locked, who can I contact to help me solve this problem?
HI there,,,
My MacBook Pro has been wiped and locked. It is requesting a PIN consisted of four numbers only.
Who do I contact to help me solve this problem?I do not know what really happend. however, my Mac is requesting a four digit PIN to open and I really have now idea what those numbers might be. when I contacted my son, he sugested that it is locked or wiped. I have all the official and required papers to claim that I am the rightful owner of the product.
who do I contact or what should I do to solve this problem?
Looking forward to hearing from you.
Sarah Zabrmawi -
My iPhone is not synching at iTunes. Every time it says your iPhone as been disconnected whenever I try to synch it, while logo on phone and iTunes says it is still connected. help I have this problem with both my Iphone4 and Iphone5. This problem is with the back up as well.
Hi singhgurwinder79,
The article linked below provides details that can help troubleshoot this error and get your iPhone to sync correctly with iTunes.
iTunes: Resolve USB-related alerts
http://support.apple.com/en-us/HT203843
Regards,
Allen -
Display and lock up problems with 3 week old MBP!!!
Hi all,
I hope that someone here can help with a scary problem that I have experienced with my (otherwise perfect!!) MBP!!
Occasionally, so far always after a boot up or wake up (but never on the login screen!), the MBP will lock up completely and the display will become corrupted as in the images I have posted below (fingers crossed!)!
As I said, it locks up the MBP so that the only action I can take is to force a reboot by pressing the On/Off button for the required amount of time.
I took the MBP to an Apple shop after making an appointment with a Genius (wonderful, lovely Spanish girl, name of Eva!!!!). Sadly, as the symptoms could not be recreated in the shop there was not a lot Eva could do, she did recommend a re-install of OS X, and also suggested that I let them have the MBP for a day so that they could hook it up to something (for a full eight hours!!) or other and test it. Eva did say that she had not seen the problem before (I took my camera to the shop and showed her the pics of the screen), but that it did not look good!!
So, I decided to take it back home and ask for help here!!!!
Any advice would be welcome!!!
Screenshot 1...
Screenshot 2...
Regards
Blakeyi would go back and show them these pics, also try doing stuff that is graphics intensive, my guess is that you have a bad video card, doing things that heat it up should get it to happen
one thing that you can use stress the vid car is the opengl example programs included with XCode (its included with the programs on the CD that came with the computer), so i recommend opening a few of those, and then doing a few `yes>/dev/null` in the terminal, also make the window semi-transparent, and put it on top of quicktime playing some movies, that should help stress the video card and put extra heat on it
if you can get that to consistently cause the problem then take it back to Apple -
i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How do I resolve LOCKED DISKS problem ? NO ACCESS ANYMORE !
Hello everybody,
I've looked carefully where to post this topic,
and I hope it's the right place here
(I have already been warned not to post the same questions in different places).
I have actually 2 internal volumes locked, 2 external Firewire volumes locked and 2 USB external volumes locked. I'm talking about *5,7 To* with *NO ACCESS* anymore.
It happened suddenly, and I was working on Snow Leopard 10.6.3 internal drive. This volume is the *only one* that has NOT been locked, but I lost a lot of applications, documents and so on on it.
Each of the locked volumes I am talking about shows,
in *Sharing & Permissions* (Get Info window),
the same Privileges :
— everyone : Custom
— admin : Custom
— olcha (Me) : Custom
— staff : Custom
— everyone (again) : Custom
You'll notice that "System" is not there (should be there with R+W),
and "admin" should have also R+W privilege.
I don't know why "staff" is here (perhaps, one day, somebody will explain to me the difference between : wheel, staff and admin).
I also don't know why "everyone" is there two times.
If I unlock the padlock (bottom right) with my password, I can only
check or uncheck the "Ignore ownership on this volume" square (bottom left).
Doing this (apparently) offers *no interest at all* to solve the problem
(and what does this function produce, when activated or not ?).
I can't *absolutely not* :
• Change *any privilege* of any of the 5 items ;
• Remove (with "-") any of these items ;
• Add a line (for example "System" or "wheel", why not ?)
but nothing new is shown after "+" making.
• The wheel (on the right of "+" and "-") shows only "revert changes" in grey.
I phoned immediately last thursday Apple Assistance,
and I am in contact with a Level 2 Apple Adviser who gave me his e-mail.
I sent him two messages, but he replied me that perhaps MONDAY
he could find the time to call me.
Now, first, please tell me if you have any idea or solution !
Thank you very much in advance.
Secondly, I have reflected on the solving,
and would like to know what you think about what follows :
You know that, in Disk Utility, you can erase a disk or partition.
If, in "Security Options…", I choose "Don't Erase Data", and then "Erase…" :
1) Sharing and Permissions will be changed and become (reset to) correct ;
2) It's said, in "Security Options…",
that "many commonly available disk recovery applications can restore that data".
I would be very glad that you indicate me :
1) the best application to use for that recovery ;
2) I already own "Drive Genius 3.0", "Data Rescue 3.0.2" and
(I think it's the best after a try on an internal 30 Go partition)
"Stellar Phoenix Macintosh Data Recovery".
Thank you in advance for your answers and advices,
With my kind regards
Olivier Herrbach
[email protected]
PS : Dear Forum Webmaster,
I would like to know :
1) if I posted this topic in the right place ;
2) if you allow me to post it elsewhere (and in this case, where ?) ;
3) is it possible to paste images in messages,
and, if yes, which format is needed (TIFF, png, jpeg …)
Thank you very much
Olivier HerrbachDear ChazBowie,
Here is the solution I've found for *LOCKED DISKS* problem.
I'll respond the shorter I can, avoiding for the moment to talk about the complicated solutions
that Apple gave to me, which involved volume by volume (only one each time) intervention, and were working by, each time, entering one line, password, then another line in Terminal. I will communicate these instructions later, but they do not need to be publicated here with urgence.
I found two little free softwares that can modify *ALL Privileges* in Sharing and Permissions, *on ANYTHING*. You will have to be careful using them, as they even allow to act as "Root" administrator.
I'd also like everyone to *donate anything* to these helpful developers, and I'd be very pleased to have *your feedback and results*.
••• 1) — *BatChmod 1.6.2* (162), written by a compatriot, Renaud Boisjoly.
E-mail (if you have doubts or questions) : [email protected]
Free software downloading site : *http://www.macchampion.com/arbysoft*
(excuse me, but I don't know how to make a link here).
••• 2) — *FileXaminer 2.7*, recommended by Renaud himself.
Dear ChazBowie,
Here is the solution I've found for *LOCKED DISKS* problem.
I'll respond the shorter I can, avoiding for the moment to talk about the complicated solutions
that Apple gave to me, which involved volume by volume (only one each time) intervention, and were working by, each time, entering one line, password, then another line in Terminal. I will communicate these instructions later, but they do not need to be publicated here with urgence.
I found two little free softwares that can modify *ALL Privileges* in Sharing and Permissions, *on ANYTHING*. You will have to be careful using them, as they even allow to act as "Root" administrator.
I'd also like everyone to *donate anything* to these helpful developers, and I'd be very pleased to have *your feedback and results*.
••• 1) — *BatChmod 1.6.2* (162), written by a compatriot, Renaud Boisjoly.
E-mail (if you have doubts or questions) : [email protected]
Free software downloading site : Gideon Softworks : *http://www.gideonsoftworks.com/*
I won't copy here the texts that are on both sites, but it's very instructive.
Remember that the applications don't only work on files and folders,
*but also on disks attributes*.
You'll also have some work to do (I don't remember, perhaps not), by going in the Get Info windows
and changing privileges to the correct ones, that means you must know
(I'm not sure, verify please) what privileges are to be set for a volume
(YOU WILL HAVE ACCESS TO THEM, AND CHANGES YOU MAKE WON'T BE RESET TO "CUSTOM").
Does anybody know something about the "Ignore ownership on this volume" checkbox ?
*I always uncheck it*.
I would also like very much to know the differences between the two-headed iconed groups :
"staff", "wheel" and "admin", and IN THE END know *WHERE are the rules* you have to observe
when doing changes in privileges (for example, I don't want to give my password to copy something in Users folder, nor "MyName" folder. I've changed that without, I hope, having created any dysfunction).
Please tell me if you know anything about these 2 subjects above.
I'm very glad if my informations have been useful/helpful.
With my kind regards,
Olivier Herrbach -
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.
Maybe you are looking for
-
How can I buy black rubber feet for my mac book pro mid 2009
MY 2009 Mid Mac Book Pro bottom pad came off. Very very poor design. These should last forever. I noticed that this was a design or product failure. Thus I need the part number to order them. Cant seem to get any assistance.
-
I have a wired network, (Netgear RT314), I bought a Linksys WRT54GS to add wireless capability. The information I have come across in trying to figure this out is confusing and contradictory at times. I have a spare port on the Netgear to plug the Li
-
Mail not showing up on macbook pro
mail is not showing up on macbook pro but does on my ipad2 and iphone4
-
Meaning of statistical data ( vs operational data?)
dear FI SDN experts, What is meant by statistical data in SAP FI? Is it possible to provide me a layman's clear and direct answer? Would definitely award points for your kind assistance. Regards Adette
-
Numbers '08 "If" with a greater or less than answer
Hi all - I have a cell with a sum D & E28 (merged cell) that I want another cell B30 to display a value based on what is in cell D & E28. If cell D & E28 is 8 or less I want B30 to say 8. If D & E28 is greater than 8.001 but less than 12 I want B30 t