HELP! continous flashing amber light

So I have the Airport Express product. Its plugged in, I tried connecting the ethernet cable from the cable modem to the ethernet slot into the Airport slot. Plugged it into the power, flashes green for a second, then amber and continues to flash amber. I have literally tried everything.
Somehow though I managed to get it to work for 5 minutes after getting a solid green light but then it stopped and started flashing amber.
What do I do? It shows up in the signal bar in my airport connection, but I just can't connect to the internet. I've reset it by pressing the little button in the back of the airport part, I've reset it through the computer, adjusting everything little detail, but nothing. I called my ISP to see what I could do and I went through the process of setting it using the Airport Setup Assistant and it said it was succesful, just still not conection. I tried configuring it through Airport Admin Utility, resulting in nothing.
I just want to connect to the internet without having to plug into the ethernet cable everytime. Someone please help
AG

First, do a factory default reset of the Airport Express per:
http://docs.info.apple.com/article.html?artnum=108044
Then cable the Airport Express to the cable modem, and pull power to both for around five minutes. Then plug the modem into power and wait a minute. Then plug the Airport Express into power. The status light should go solid green within a minute. If it does - try configuring the Airport Express again via the Airport Setup Assistant, and you should have internet access. If it does not - please post another message.

Similar Messages

I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

Think you need to provide some more details about what you are connecting

I am upgrading wi-fi router from Airport Express to Airport Extreme. I followed set up instructions yet I am still getting the flashing amber light and cannot setup (using manual setup or the continue button). What should I do??

Hello,
I am upgrading my wireless router from an Airport Express to an Airport Extreme. After disconnecting the Express and plugging the Extreme via ethernet cable to the modem, I am receiving a flashing amber light after connecting the power source. I also reset the modem while the Extreme was still powered and plugged into the modem, but no luck. I also tried resetting the modem and the Extreme and still no resolution. Please advise. Thank you!

This error usually occurs when the Windows Firewall and/or anti-virus software blocks the connection attempt from the PC to the AirPort Extreme.
Microsoft Security Essentials can do the same thing.
Things would be much easier if you had a Mac or iPhone or iPad to set up the AirPort Extreme. Otherwise try turning off the Windows Firewall and Anti-Virus programs, etc on the PC.
Restart the PC, then see if the PC can contact the AiPort Extreme. It will likely help to connect an Ethernet cable from the PC to one of the LAN <-> ports on the AirPort Extreme. You can disconnect the Ethernet cable once the AirPort Extreme has been configured.
Re-enable the Windows Firewall, Anti-Virus, etc and restart the PC.

My apple TV has stopped working completely. Just a flashing Amber light

My Apple TV has stopped working. When it is turned on I just get a flashing amber light and it does not turn blue as normal. It doesn't connect wirelessly to my Mac and it doesn't connect to the TV. I do not get the setup menu and it is totally unresponsive to the remote control. I have tried connecting it directly to my Mac but this also does nothing. I am at a loss as to what to do next. I have a lot of films and music stored on it and I am worried that I have lost it all. I am not sure which generation it is, but it is the silver one, model number A1218. Can anyone help?

Unfortunately, it sounds as though your Apple TV 1 has failed. Unlike the later Apple TVs, you cannot connect it to iTunes to restore it.

Time Capsule Connection Help Needed (Flashing Amber)

Guys,
I've been trying to troubleshoot my Time Capsule connection for a week now and I have had zero luck.
I have a Imac with OSX 10.6.8 that uses AirPort v 5.6.1. I have a Cat-5 (ethernet cable) plugged from my Time Capsule port (looks like this <-->) into an available port in my cable mode/router. My Imac is also plugged into this router. The two cat-5 (ethernet) cables are side by side.
So....
Every time I plug in the Time Capsule I get the following prompt via AirPort.
AirPort Utility found a Time Capsule 802.11n (4th Generation) that is
reporting problems.
Time Capsule's Name : My Capsule
          IP Address: 10.0.1.1
          Versino: 7.6.1
          AirPort ID: 12:88:93:CC:FF:72
If this is not the AirPort wireless devise you want to setup you can select another from the list on the left. If you don't see it make sure.... Blah blah blah....
To make a long story tollerable I do see my Time Capsule on the left at the top. Its the only one and its selected by default. So I do the next logical thing right? I click "Continue" and AirPort reads the Time Capsule's configuration.... and then...... I get the error
An error occurred while reading the configuration.
Make sure your Apple Wi-Fi base station is plugged
in and in range of your computer or connected via
Ethernet and try again. (-6753)
Can anyone help me understand why I can grab the Time Capsule's IP Address but AirPort can not read the hardware's (Time Capsule) config?
I'm at a loss.
Could my ethernet cable be the issue?

Hackintosh,
Thanks man... Yes, I plugged it into the circle symbol with no joy. I also went to Wal Mart and baught a new seven foot cat-5 for $10. Again I still have the flashing amber light.
After plugging in the ethernet cable into the circle icon port AirPort returns the following prompt.
I reset the TC (ball point pen to the reset hole untill fast blinking amber light occurs) and entered the needed params and it returns this error.
An error occured close the configuation window and try again.
It must be a config parameter that I'm setting incorrectly. There's a bunch so who knows what I'm doing wrong.
I just need the to talk to my Imac so i can get a backup executed. A wireless connection will take too long.
FYI: The cat-5 is brand new and is 100% functional (green light on the TC and router.)

HT1178 i can't connect the time capsule with my mac using the aiport utility. i want to use the time capsule to make backup for my mac book pro. the time capsule is giving a flashed amber light. please advice me

the time capsule is giving flashed amber light and i cant connect it to my mac book pro. i want to use it with the time machine to make backup for my mac. please advice me.

To do the setup, plug it in via ethernet.. do not try to setup over wireless.. Once it is setup you can plug the TC into the network and use wireless.
Most likely you will use the TC in bridge to an existing modem router.. but we cannot help as you have no details of the network setup.
I do recommend in the setup of the TC you use SMB type names.. that means, short, no spaces pure alphanumeric.. as later Mac OS do have issues with long names, spaces and that apple shocker, the apostrophe.

APX Intermittently Operational (Flashing Amber Light)

For several months I have enjoyed wireless conectivity through my AirPort Express connected to my DSL router. When attempting to connect the other day I was unable to access the network eventhough I had full signal strength. Upon examining the AirPort Express I noticed the indicator light flashing amber. I tried everything in my limited bag of tricks to get it up an running again, but it will only work intermittently for short bursts before returning to the flashing amber light.
Here's what I have tried...
Soft Reset
I reset the base station through the AirPort Admin Utility.
Hard Reset
I reset the base station by pressing the button until the indicator light flashed and used the AirPort Setup Assistant to reconfigure the station.
Turned It Off - DHCP Lease Renewal
I turned off the DSL router, the AirPort Express, and the computer overnight.
Changed Firmware
I loaded an earlier version of the Airport Express firmware after reading on the forum that it solved some of the problems with the AirPort Extreme.
I am able to access the internet via the ethernet port, so I dont suspect any problems with my DSL router setup. I have a strong signal and dont suspect any interference.
Any help would be appreciated.
iBook G4 Mac OS X (10.3.8)
iBook G4 Mac OS X (10.3.8)
iBook G4 Mac OS X (10.3.8)

Hi andrewlrogers and welcome to Discussions,
Seems you have tried a lot of different solutions. But have you done a Software Update for you OSX. The quickest way is to click on the Closed Apple in the very top Left of your screen and Select Software Update.
After this update you might have to reboot your computer. Also, you might have to do a Power Cycle your Modem and your Airport Express. Maybe you might have to do another Hard Reset to your Airport Express, following Hard Reset instructions in this article: Airport Express Reset
hope this helps and let us know what happens....
Powerbook G4 1.67 15", 1 gig ram, 128 vram, 80 gig harddrive Mac OS X (10.4.8) Powermac G3 266 mt, Dell 5150,ibook G4, 1 gig shuffle, epson printers, airport

Unable to boot Cisco Ironport C160, beeps and flashing amber light

At first RAID staus was showing as degraded. I tried to rebuild the RAID but hat failed. I was able to logon and update to version 8.0 after the RAID rebuild failed.
Now when I try to boot the ironport it beeps twice and keeps on repeating every 10 seconds or so, and there is also a flashing amber light at the back and front of the device.
Suspecting that there was a problem with the hard drives i tried to restore a recent image of the Ironport that I had, hoping that the RAID would rebuild, But that is not the case. The Ironport is still unable to boot and is beeping twice as well as the flashing amber light.
Does anyone know if there is anyhting that I can do to rectify this problem?
Thanks in advance

Amber light usually means hardware issue. You should contact TAC.
It is not clear what you did to rebuild the RAID but you should try nothing before discussing with TAC. Any attempt to do reimage could break the box for good.
At the moment you have access to the box, enable remote access and call TAC.
There is an account, named enablediag which can be used for troubleshooting. It has the option to open remote access so TAC can assist further. The password is the same as your admin account.
I hope this helps.
-Valter

Airport express not working (flashing amber light)

I just bought an airport express and have spent days trying to set it up with my Cable modem. I use Time Warners roadrunner as my service provider and know that the cable modem is not the problem because the internet works fine when I hook my mac laptop directly up to the modem via ethernet cable. Originally when I first plugged in the airport express base station I only received the flashing amber light. I have tried unplugging the modem and plugging it back in multiple times, but I continuously get the flashing amber light on the airport base station. My modem however recognizes the airport and is flashing the light that signals that it is linked to a computer.
My computer recognizes the airport, I get a strong signal and the airport utility says that everything is ok but the light on the base station flashes amber and the Internet wont work. Originally I had it set to Connect Using: Ethernet and Configure TCP/IP: DHCP and the light flashed amber so I started messing around with the settings. I changed it to Configure TCP/IP: PPPoE but was not sure what my login and password would be so I used my account information for roadrunner and to my surprise the light stopped flashing amber and turned green. I thought my problem was miraculously solved but the Internet still wouldn’t work, it kept trying to connect to the PPOE server with no luck. I had never expected the wireless to work under the PPOE setting so I was very surprised that the light turned green rather than amber. This is very confusing to me so I put the configure setting back to Ethernet rather than PPPoE and the light started flashing amber again. I have put the airport back to its default settings many times and tried starting over, but I still get the amber light.
I have run out of things to try and do not know a whole lot about wireless Internet so any help would be useful. I know of other people that have set up their airport express with very little hassle and knowledge of computers, so I thought this was going to be an easy process, apparently I was very wrong.

Roadrunner's cable internet service uses DHCP and not PPPoE - so the first thing you need to do is change that configuration back to DHCP on your Airport Express.
Then unplug both the cable modem and Airport Express from power for a while - the longer the better. Try five minutes, and if that doesn't work then try all day or overnight. After you get tired waiting, plug the modem back into power and wait a minute. Then plug the Airport Express into power - and hopefully by now Roadrunner's connection will have been reset and the Airport Express will be able to establish a connection, get an IP address, and show you the solid green status light.

I am setting up new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resetting and unplugging. How do I fix this?

I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets

I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets

Eternal flashing amber light... what do i do?

Hello all,
Here's a tricky one. Or maybe not.
I purchased an AirPort Express in Tokyo last year, and it has worked fine since then both in Canada and Japan (i know you're not supposed to use japanese hardware here but hey, it works).
I have recently moved to Vancouver, and my airport suddenly doesn't work anymore. Nothing. it flashes amber lights, no matter what I do, hard reset or factory reset. I can't soft reset since I can not even detect it on my computer. I know my airport card works because I use it everyday at school.
it's connected to an APC surge arrest, along with a stereo, but that shouldn't be an issue.
So the bottom line is that my comp does not see it, no matter what I do. any suggestions?
Also, is warranty covered in Canada if it was purchased in Japan? And how do i find out when the coverage is up since I no longer have the receipt... oops.
Thanks for any help you offer!

hello thomas, and thank you for your prompt reply.
DSL signal or no DSL signal, (whether the cable is plugged in or not) the computer refuses to recognize the AE, after resetting the AE, or after resetting the computer. When the DSL cable is connected to the AE, it will give me a green light, however it will still not be recognized by the computer, using Airport Setup Assistant, the menu bar, or Airport Admin Utility.
I brought it to my local apple reseller, and they thought they had fixed it simply by resetting it. It was temporarily recognized by their floor demo, and airtunes worked, however it was unable to connect to the internet when I brought it home after that. I reset the computer without touching the AE, and since that point in time I have yet to reconnect. I have tried several times hard resetting, factory resetting, restarting the computer, but to no avail.
As I mentioned, it was purchased in Japan last year. Can the ohmage affect the AEs usage?
There is a signal (I am directly connecting via cable to my computer right now) when it is plugged into the AE, and as mentioned above, it WILL get a green light. However that is the extent of it.
Interference should not be an issue, since I am trying to set it up right next to where the computer is. I have no cordless phones, and I know others in the building who are using AEs successfully, so I would be hesitant to blame reception.
I hope this helps you Thomas, and your help is greatly appreciated.
I've worked at an Apple reseller (when there were no Apple Retails in Canada), and I've gone through many problems with AXs and AEs... but this one is stubborn. Thanks for the support.

Brand new Airport Extreme Base Station flashing Amber light

hi
I know this question had been addressed before , but i couldnt find satisfying answer yet
I bought this Brand new airport extreme base station, I hooked up my ethernet cable into WAN Port as per the manual.
I installed airport utility 5.1 on my windows xp SP 2 laptop
and then I powered on the base station
The light in front was Solid Amber and then it turned Flashig Amber .
I tried resetting the base station and Cable modem. but no luck with Flashing Amber Light
Any Help for beginner Apple user?
thanks
Airport Extreme Base Station ( 802.11n) Windows XP SP2

Here is another post that addresses your question:
http://discussions.apple.com/thread.jspa?threadID=1005682&tstart=15

Why AE flashing amber light, yet connects to 2 of 3 home computers?

I don't get this.
Suddenly my Macbook pro can't connect to either of my two networks off the Airport Extreme.
I have a Cable dsl modem, etherneted to my mac mini, which gets internet no problem.
iBook is in another bedroom and gets full interenet - even though it's wireless and the AE has a flashing amber light.
The Macbook pro sees the network but I still can't connect even though I've tried everything:
trying to airport utility (which tries to the read the airport configuration but delivers an error message); I repair permissions; zapped the pram.
And yet my Airport Extreme keeps flashing amber. And - the wireless ibook gets internet no problem.
Any ideas on what's wrong?

Power cycle the entire network, just turn everything...all devices off, order is not important
Start the modem first and let it run a few minutes by itself
Start the AirPort Extreme the same way
Keep powering up devices the same way until everything is back up
Check for proper operation
If the AirPort Extreme is still blinking amber,
Try temporarily connecting an ethernet cable from the Mac to one of the LAN <-> ports on the AirPort Extreme. See if AirPort Utility can read the configuration that way.

TS1589 Had to replace our Airport Extreme when it stopped working (still under warranty). Now I can't get anything but flashing amber light. Airport utility says "error occurred" when I try to get it set up.

Had to replace our Airport Extreme (802.11n) and now can't get anything but flashing amber light. Have gone the route of turning off modem (overnight), restarting everything this morning and at least when I turned on the laptop (no desktop) the Airport Utility opened automatically. I put in the info for the Airport Extreme that we had previously (password, etc) but it couldn't connect (said error occurred). I would assume this is because of the flashing amber light?

I am having a similar issue. However I've had my airport express for over 3 years. Yesterday we had to reset the router as it wasn't broadcasting.
Today having same issue so we reset the router again. And now still blinking amber. When I go to the Airport Utility I can't even go to the Manual Setup as I'm getting the Error 4. Internet works fine as the router and modem are hooked up to my computer via Ethernet cable.
I did a factory reset and the AE is broadcasting again. but I can't get in to protect the network. And it's still blinking amber.
Any thoughts would be great.

AirPort Extreme Would like to eliminate comcast netgear router. Flashing amber light.

Hi. I have Comcast service for TV and Internet. The provided Comcast modem is an Aries and the router is a Netgear. Both are located on my garage at a panel box where all cables come in and get distributed around the house with an 8 port switch (large house- all wired with rg6 and coaxial). The layout is comcast main cable-aries modem-netgear router- netgear switch- wall jacks through out house. As expected the wired signal from the provided netgear router only worked near the garage. So I purchase an AirPort Extreme and hooked it up to the wired signal at the middle of house Internet jack. Questions:
1). My AirPort Extreme has a flashing amber light. Can't get a green signal. But it works
2). Can I get rid of the Comcast netgear modem? Compatibility with AirPort Extreme ?? I would save money from rental!!!
3). If so would the signal from the new AirPort Extreme cover the house from the garage?
4). Is there a better way of configuring the network? Or another piece of equipment that I need to buy?
Thanks

Confirm the Ethernet jack you are using is operative by connecting a computer to it and temporarily disabling the computer's wireless.
If you use AirPort Utility on a computer or iOS device, it will tell you the reason the Extreme's LED is flashing. I suspect it has not been configured as a bridge - change its "Connection Sharing" to "Off (Bridge Mode)". Make its wireless network name and security settings identical to your existing wireless network.
You will still require Comcast's Arris modem.
The signal from the new Extreme, plus that of your existing Netgear router, should be sufficient to provide wireless service for most modest sized houses. It's impossible to be certain due to the nature of wireless communication.
A garage is not the ideal location for either a wireless access point or a switch. Since both of them need to connect more or less radially to the devices that require it, a better location is in the center of a house. Panel boxes are almost always in a corner. That's convenient for public utilities, not so much for wireless. It's also the easy way if you're a Comcast technician. If your house is already wired for Cat 6 as well as cable, it would not involve much additional effort to relocate your Comcast modem and existing router so that your wireless network will serve your house more effictively. Two wireless access points as you propose will also mitigate this.

HELP! continous flashing amber light

Similar Messages

Maybe you are looking for