Help convert from 7 to labview 6.1
Hi,
Could anyone help me to convert the code to labview 6.1
Thankyou very much
Attachments:
ag663xxa.zip 503 KB
You can try creating a 6.1 driver yourself. All the IVI drivers are simple wappers around a Call Library Node Function into the DLL created in LabWindows/CVI. The LabVIEW driver is created from the Tools>Instrumentation>Import CVI Instrument Driver selection. Download the CVI driver and install it. The converter will require some files installed in the \VXIpnp\WinNT (.fp) and \VXIpnpWinNT\bin (.dll) folders.
Similar Messages
-
Need help converting from 4.0 to 2011
hello,
Need help converting files from 4.0 to 2011.
thank you
Solved!
Go to Solution.
Attachments:
noise source.vi 73 KB
8673D.vi 30 KB
8970 FREQ.vi 26 KBattached as 8.2, which you can open
missing some subVIs - not sure if you already have them
Attachments:
8673D.vi 13 KB
8970 FREQ.vi 11 KB
noise source.vi 24 KB -
Any help converting from Entourage to iCal?
With all the problems syncing between Entourage calendar and my wife's iPhone (and now Apple dropping sync to Entourage in the new "forced" upgrade on MobileMe), I want to help my wife convert from Entourage to iCal. Anyplace to go for that help?
You can use Thundebird to replace Entourage and get the Lighting.Add-on to Thunderbird to replace the calendar of Entourage which USED TO synch over ical to Mobile Me as follows:
1. How to set up the iCal for Lightning and MobileMe
open Thunderbird
Install the Lightning add-on
Select “Preferences” “Advanced” “General”“Config Editor…”
yes, be careful
scroll down until you find “general.useragent.extra.lightning” andset the value to (nothing). you can also set the value to “ical” or whatever,just change it.
Close the config editor, close Thunderbird
Get the link to your iCal on MobileMe asfollows:
open ical (YES, iCAL)
right click the calendar under [email protected] youwant to access
select“get info”
copythe url after “CalDAV url:” it should read“/calendars/users/1.xxxxxxxxx/xxx-x-x-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxx”
OpenThunderbird (assuming you have the Lightning add-on installed)
Within Thunderbird
File/ New / Calendar
onthe networkselect “CalDav”
intolocation: type the following (excluding the “”) :“https://cal.me.com:8443/calendars/users/1.xxxxxxxxx/xxx-x-x-xxxxxxxx-xxxx-xxxx-x xxx-xxxxxxxxxxx”where the xxx stuff is the part of the url that you copied under 5. above.
Whenyou check what is written in the location field, it will end with a “/” which is correct.
This works fine for me.
If you want to back-up your calendar on Thunderbird/Lightning outside the cloud, goto iCal and export the file to a local location as backup. -
I never learnt as2 and I just purchased a fla file from a stock sight thinking it was in as3 and it isn't!!! doh
can anyone help me convert this from as2 to as3:
stop();
import flash.filters.*;
//--------------variables to change--------------------------//
//set this value to true if you want sparkles to be created from the mouse
//and false if you want automatic sparkles
var createSparklesFromAnyMouse:Boolean = true;
//set to true if you want sparkles to stop being created when the mouse
//is still
var createSparklesFromClick:Boolean = false;
//modify the size of the sparkles
var maxSparkSize:Number = 18;
var minSparkSize:Number = 8;
//increase this value to shorten the life, 0 to live forever
var fadeSpeed:Number = 10;
//the speed the sparkles fall, higher number quicker the speed
var speed:Number = 1;
//choose whether you want the sparkle colour to be random
var randomColour:Boolean = true;
//if you don't want a random colour pick a default colour
defaultColour = 0xFFffFF;
//do not modify code below here...
var sparkle:Number = 0;
var mousePosX:Number;
var mousePosY:Number;
var whichBat:Number;
var count:Number = 0;
this.createEmptyMovieClip("empty",this.getNextHighestDepth());
howToCreate();
function howToCreate() {
if (createSparklesFromClick == true) {
trace("create sparkles every time I click the mouse");
//create sparkles from mouse clicks
activateClick();
} else {
if (createSparklesFromAnyMouse == true) {
trace("create sparkles from the mouse");
//create sparkles from the mouse
this.onEnterFrame = function() {
createSparkle();
createSparkle();
} else {
trace("create sparkles every time I move the mouse");
//create sparkles ONLY when the mouseMoves
createWhenMoving();
function createWhenMoving() {
this.onEnterFrame = function() {
if (mousePosX != _root._xmouse && mousePosY != _root._ymouse) {
createSparkle();
mousePosX = _root._xmouse;
mousePosY = _root._ymouse;
function activateClick() {
empty.onMouseDown = function() {
this.onEnterFrame = function() {
createSparkle();
empty.onMouseUp = function() {
delete this.onEnterFrame;
function createSparkle() {
movingSparkle = this.attachMovie("colouredSparkle", "s_"+sparkle, sparkle);
movingSparkle2 = this.attachMovie("colouredSparkle", "ss_"+sparkle, sparkle+100);
sparkle++;
if(sparkle>100){
sparkle = 0;
setParams(movingSparkle);
setParams(movingSparkle2);
function setParams (movingSparkle){
movingSparkle._x = _root._xmouse+randRange(-8, 8);
movingSparkle._y = _root._ymouse+randRange(-15, 0);
movingSparkle._xscale = movingSparkle._yscale=Math.random()*maxSparkSize+minSparkSize;
movingSparkle._rotation = randRange(0, 360);
if (randomColour == true) {
col = Math.round(Math.random()*0xFFFFFF);
} else {
col = defaultColour;
colouredFill = new Color(movingSparkle.colour_mc);
colouredFill.setRGB(col);
colouredFill = new Color(movingSparkle.white_mc);
colouredFill.setRGB(col);
moveSparkle(movingSparkle);
function moveSparkle(movingSparkle) {
var ySpeed = randRange(0, speed);
var rot = randRange(-15, 15);
var blurX = randRange(2, 5);
var blurY = blurX;
var blurFilter = new BlurFilter(blurX, blurY, 3);
movingSparkle.white_mc.filters = [blurFilter];
movingSparkle._alpha = randRange(85, 100);
var alphaDrop = randRange(1, fadeSpeed);
movingSparkle.onEnterFrame = function() {
//change speed
this._y += ySpeed;
//change rotation
this._rotation = this._rotation+rot;
//make it smaller
this._xscale = this._yscale=this._xscale*0.98;
//fade the sparkle
this._alpha = this._alpha-alphaDrop;
//remove the movieclip if it get tiny
if (this._alpha<10) {
this.removeMovieClip();
delete this.onEnterFrame();
if (this._height<4) {
this.removeMovieClip();
delete this.onEnterFrame();
function setColour(mc, col) {
colourIt = new Color(mc);
colourIt.setRGB(col);
function randRange(min:Number, max:Number):Number {
var randomNum:Number = (Math.random()*(max-min))+min;
return randomNum;Zhanbolat,
In theory, conversion of this code is not difficult, especially because it is clear what the logic is designed to do. The issue is that you will not have an expected result once only this code is converted in isolation. This puppy uses some other objects that are written in AS2 including entities in the FLA library.
In short, it looks like this application needs a total overhaul at every level in order for it to properly function as an AS3 program.
With that said, although this is, again, not a difficult task, it is unlikely to find someone to do it for free. You may have a better luck if you start conversion yourself and post focused questions as you go. -
I have been a Mac user for several years now. Minus a few years that I am not proud of. LOL I have converted several of my family members and friends as well. My sister is now looking at an iMac to replace her Dell.
The question is this. She has an external hard drive to back up all of her pictures etc. Due to the fact that she is having serious problems with her current Dell, I am not sure that we will be able to burn cds to transfer all of these documents.
Is there any other way to get the information transferred easily? I am guessing that I cannot simply plug the PC formatted external hard drive into the new iMac for transferring. Once we get the information off of the external hard drive, I should be able to reformat the drive to work with the Mac though correct??
Appreciate all of your help and tips. I always seem to get really good information from the folks on here.
Thanks
JAs Niel has said, MacOS can read NTFS and FTA32 drives, it can also write to FAT32 drives. As long as the pictures and other files are in a common format (JPG, TIFF, TXT, DOC, etc.) you can copy those files to the iMac and use the included or freely available software to access the files.
While there are a very few drive enclosures that don't work or work well with MacOS, but for the most part, you will be able to re-format (or more likely re-partition & re-format) the drive to be in a Mac format. There are a couple of free, and commercial drivers to allow you to have full read/write access to an NTFS drive while running MacOS. I mention this because if there is a chance that she will want to share that drive between a PC and a MAC, getting NTFS access from MacOS is generally easier and cheaper than getting HFS+ access from a PC. -
Help converting from Cakewalk/Sonar
All my song files are from Cakewalk/Sonar. Does anyone know if Logic Pro can read cakewalk/sonar files?
If not, any suggestions on how I can convert files to Logic Pro, especially files that have both midi and audio tracks.
I want to make the switch to Logic Pro, but don't want to leave behind the hundreds of files that I created on my PC with Cakewalk. Help.I used to know Sonar very well. Off the top of my head, here are the possible solutions that come to mind.
1. Try exporting the Sonar project as an OMF file. Logic can import OMF files but I've never tried it to see if it really works well.
2. Export the audio from Sonar as broadcast wave files. Also export the midi as standard midi files. Then, import them all into a Logic project. Broadcast wave files maintain the start points so everything will line-up correctly.
Good luck! -
[AS] Beast of a script needs help converting from Quark 8 to InDesign CS5
First off, THANK YOU for even reading this post. Here's the dilema. I work in a publishing company that used an AppleScript from Quark 8 to automate our pagination from set text we pull from our sales reps worksheets. About 8 months ago we switched fully to InDesign CS5, but have had to hold onto Quark 8 to be able to keep running our pagination. I'd like to see if the geniuses (yes, I've been trolling these forums looking to solve this myself and seen some great problems fixed) on these forums can help me figure out the proper conversion I would need to be able to leave Quark 8 in the rearview.
Here's our current code... (I warned you it was a beast)
set Ad_Props to {¬
{Ad_Label:"SPREAD – ", Ad_Width:2.495, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
{Ad_Label:"FULL – ", Ad_Width:1.225, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
{Ad_Label:"SPREAD – ", Ad_Width:2.495, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
{Ad_Label:"JUNIOR – ", Ad_Width:0.90625, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/2H – ", Ad_Width:1.225, Ad_Height:0.785, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/2V – ", Ad_Width:0.5875, Ad_Height:1.62, Ad_Text_Angle:90}, ¬
{Ad_Label:"1/3V – ", Ad_Width:0.5875, Ad_Height:1.2025, Ad_Text_Angle:90}, ¬
{Ad_Label:"1/4 – ", Ad_Width:0.5875, Ad_Height:0.785, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/4 Strip – ", Ad_Width:0.26875, Ad_Height:1.62, Ad_Text_Angle:90}, ¬
{Ad_Label:"1/8H – ", Ad_Width:0.5875, Ad_Height:0.3675, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/8V – ", Ad_Width:0.26875, Ad_Height:0.785, Ad_Text_Angle:90}, ¬
{Ad_Label:"Junior (GOLF) – ", Ad_Width:0.8, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/3V (GOLF) – ", Ad_Width:0.375, Ad_Height:1.62, Ad_Text_Angle:90}, ¬
{Ad_Label:"1/3sq. (GOLF) – ", Ad_Width:0.8, Ad_Height:0.785, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/6V (GOLF) – ", Ad_Width:0.375, Ad_Height:0.785, Ad_Text_Angle:90}, ¬
{Ad_Label:"Directory Listing Only – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}, ¬
{Ad_Label:"INSERT (# in notes) – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}, ¬
{Ad_Label:"Other (See Notes) – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}, ¬
{Ad_Label:"------------ – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}}
set Position_Width to number
set Position_Width to 11.375
set Position_Height to number
set Position_Height to 1.875
set Jump_Height to number
set Jump_Height to 0
set Variable_Count to number
set Variable_Count to 0
set Variable_Height to number
set Variable_Height to (1.875 + (1.62 * Variable_Count))
set Last_Ad to number
set Last_Ad to 0
tell application "QuarkXPress"
activate
try
display dialog "WARNING: This version of 'Dummy Square Maker' runs much slower than the last version, a confirmation will tell you when you are finished. Please be patient." & return & return & "Make sure to have the text box selected" buttons {"Cancel", "Accept"} default button 2 with icon caution
set ThisBox to object reference of current box
tell story 1 of ThisBox
set (every paragraph where it is return) to ""
set style sheet of every text to null
set style sheet of every text to "DUMMY TEXTS"
repeat with i from 1 to (count of paragraphs)
try
tell paragraph i
set ThePage to my get_CurrentPage()
try
if it contains " – " then
set style sheet to "AD SIZE"
set Ad_Size to contents
set {This_Width, This_Height, this_angle} to {"", "", ""}
repeat with This_Ad in Ad_Props
if Ad_Size contains (Ad_Label of This_Ad) then
set This_Width to Ad_Width of This_Ad
set This_Height to Ad_Height of This_Ad
set this_angle to Ad_Text_Angle of This_Ad
exit repeat
end if
end repeat
set Ad_Box to my Make_Box(ThePage, {1.875, 10.875, This_Height + 1.875, This_Width + 10.875}, this_angle)
duplicate contents to (end of Ad_Box)
else if it contains "—" then
set style sheet to "AD REP/PLACEMENT"
duplicate contents to (end of Ad_Box)
else if it starts with "©" then
set style sheet to "AD REP/PLACEMENT"
delete (character 1)
duplicate contents to end of Ad_Box
if Position_Width ≤ 19.75 then
set Jump_Height to Jump_Height + This_Height
(*_________________This is where Ad Boxes Stack_________________*)
if (Jump_Height ≤ 1.62) then
set origin of bounds of Ad_Box to {Position_Height, Position_Width}
set Position_Height to Position_Height + This_Height
(*_________________This is where Ad Boxes more right_________________*)
else
set Position_Height to Variable_Height
(*set Position_Width to Position_Width + This_Width + 0.05*)
set Position_Width to Position_Width + Last_Ad + 0.05
set origin of bounds of Ad_Box to {Position_Height, Position_Width}
set Jump_Height to This_Height
set Position_Height to Variable_Height + This_Height
end if
set Last_Ad to This_Width
(*_________________This is where New Row appears_________________*)
else
set Position_Width to 11.375
set Variable_Count to Variable_Count + 1
set Variable_Height to (1.875 + (1.62 * Variable_Count))
set Position_Height to Variable_Height
set origin of bounds of Ad_Box to {Position_Height, Position_Width}
set Position_Height to Position_Height + This_Height
set Jump_Height to This_Height
set Last_Ad to This_Width
end if
else
duplicate contents to (end of Ad_Box)
end if
end try
end tell
on error errmsg number errnum
display dialog "There has been an error " & "[" & i & "] (" & errmsg & " [" & errnum & "])" buttons {"Okay"} default button 1 with icon stop
end try
end repeat
delete contents
set style sheet of every text to null
end tell
beep 2
display dialog "Automation Finished" & return & return & "IMPORTANT NOTE: Color your Ad Squares according to Sales Rep, and select them all and 'BRING TO FRONT [F5]', this is VITAL." buttons {"Okay"} default button 1 with icon stop
on error errmsg number errnum
beep 3
if errnum ≠ -128 then
beep
display dialog errmsg & " [" & errnum & "]" buttons {"OK"} default button 1 with icon stop
end if
end try
end tell
on Make_Box(ThePage, TheBounds, this_angle)
local ThePage, TheBounds, this_angle
tell application "QuarkXPress"
tell page ThePage of document 1
set Ad_Box to make new text box at end with properties {bounds:TheBounds, vertical justification:centered, color:"Rep_Other", shade:100, opacity:10, text angle:this_angle, frame:{style:solid line, color:"Black", shade:60, width:0.1}}
end tell
end tell
(*end tell*)
return Ad_Box
end Make_Box
on get_CurrentPage()
tell application "QuarkXPress"
tell document 1
return page number of current page
end tell
end tell
end get_CurrentPageHi,
I think with this, you can already make good progress in your work.
Good luck!
global mydocument
tell application "Adobe InDesign CS5.5"
set mydocument to active document
tell mydocument
set myParaStyle to paragraph style "DUMMY TEXTS"
tell page 1
set TheBounds to {0, 0, 20, 50}
set Ad_Box to make text frame
tell Ad_Box
set geometric bounds to TheBounds
set vertical justification of text frame preferences to center align
set contents to "This is the contents"
end tell
set myStory to parent story of Ad_Box
set applied paragraph style of every paragraph of myStory to myParaStyle
end tell
end tell
end tell
Your two handlers then look like this:
on Make_Box(ThePage, TheBounds, this_angle)
local ThePage, TheBounds, this_angle
tell application "Adobe InDesign CS5.5"
tell page ThePage of mydocument
set Ad_Box to make text frame
tell Ad_Box
set geometric bounds to TheBounds
set vertical justification of text frame preferences to center align
end tell
end tell
end tell
return Ad_Box
end Make_Box
on get_CurrentPage(CurrentTextFrame)
tell application "Adobe InDesign CS5.5"
tell mydocument
return name of parent page of parent page of CurrentTextFrame
end tell
end tell
end get_CurrentPage
Shorter version:
on get_CurrentPage(CurrentTextFrame)
tell mydocument of application "Adobe InDesign CS5.5"
return name of parent page of parent page of CurrentTextFrame
end tell
end get_CurrentPage
Ce message a été modifié par: OlivierBerquin -
Help convert from 7 to 6.1
Hello all.
Someone tried to answer my question but i can't open his file cuz i only have labview 6.1. could someone please convert it for me? thanks.
Aquaphire
---USING LABVIEW 6.1---
Attachments:
saveclock4.vi 21 KBHi
Problem is that whoever posted the example for you, didnt include the subVI, so the VI is incomplete.
Get the SubVI and I will save it back for you.
Regards
Meister -
Need help converting from Actionscript 2.0 to 3.0
I have an old flash file that I need to update. Ufortunately I only ahve access to Flash Pro CC and when I open the file it says the program no longer supports Actionscript 2.0. When I test the file, I get the following compiler errors:
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 7, Column 3
1120: Access of undefined property ratio.
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 7, Column 20
1180: Call to a possibly undefined method number.
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 7, Column 27
1120: Access of undefined property _root.
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 9, Column 27
1120: Access of undefined property ratio.
And on the MoneySlide layer in Actions:
this.ratio = 0;
this.loadBar._width = 0;
this.dragger.ratio.text= "$0";
dragger.onPress=function(){
this.startDrag(true,0,0,line._width,0);
this.onEnterFrame=function(){
ratio=Math.round(number(_root.transitBenefitLimit/100)*(thi s._x/(line._width/100)));
loadBar._width = Math.round(this._x);
dragger.ratio.text= "$"+ratio;
dragger.onRelease=dragger.onReleaseOutside=stopDrag;
Any help changing the code to be compatible with Actionscript 3? thanks in advance...as3:
this.ratio = 0;
this.loadBar.width = 0;
this.dragger.ratio.text= "$0";
dragger.addEventListener(MouseEvent.MOUSE_DOWN,downF);
var dragged_mc:MovieClip;
function downF(e:MouseEvent):void{
dragged_mc=MovieClip(e.currentTarget);
dragged_mc.startDrag(true,0,0,line.width,0);
dragged_mc.addEventListener(Event.ENTER_FRAME,enterframeF);
stage.addEventListener(MouseEvent.MOUSE_UP,upF);
function enterframeF(e:Event):void{
ratio=Math.round(Number(MovieClip(root).transitBenefitLimit/100)*(dragged_mc.x/(line.widt h/100)));
loadBar.width = Math.round(dragged_mc.x);
dragger.ratio.text= "$"+ratio;
function upF(e:MouseEvent):void{
stage.removeEventListener(MouseEvent.MOUSE_UP,upF);
dragged_mc.removeEventListener(Event.ENTER_FRAME,enterframeF);
dragged_mc.stopDrag(); -
Converting from LabView 4.0 to 8.5
I have a Pico Technology TC-08 thermocouple datalogger (RS232). It has drivers for Labview 4.0 but I use Labview 8.5, which says it can't convert the drivers. From the help pages I have understood that there is separate software that can convert from Labview 4.0 to 8.5. Can anyone tell me where I can download or otherwise obtain this software?
Hi EKY,
converted to LV7.1 - should be ok now
But: there's a "missing dll"-error. You have to check this in LV8.5.
There is also no guarantee the dll will work with LV8.5 or maybe new operating system (from Win95 to WinXP or Vista?)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
TC081_LV71.LLB 29 KB -
Please help me to convert from 5.0 to 2009
Please help me to convert from 5.0 to 2009
Source LabVIEW version: LabView 5.0
Target LabVIEW Version: LabView 9.0
Thank you so much..
Solved!
Go to Solution.
Attachments:
shutter.llb 255 KBLabVIEW 9.0
Attachments:
shutter.llb 90 KB -
Convert from LabVIEW 2011 to LabVIEW 9.0
Please convert from LabVIEW 2011 to LabVIEW 9.0
Attachments:
Watlow Vis.zip 76 KBLooks like somebody forgot to attach the zip file. Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Watflow.zip 57 KB -
I'm helping a friend with a new 4S iPhone. He's converting from an old 3GS. We've gone throughout the activation, update to iOS 5.0.2 and restored. Now I'm surprised to find that the Facetime app is not on his new 4S iPhone. How do we fix this?
I would suggest you read the user guide. There IS no Facetime App for the iPhone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
< Edited By Host > -
I paid for PDF to Word subscription through iTunes but when I try to convert from my computer directly from Adobe, it says I need a subscription. Help?
Hi divabuyer,
It sounds like you're trying to convert to Word from within Reader, is that so? Are you signed in to Reader? If so, you'll see your name in the upper-right corner of the Reader application window.
If that doesn't work, please try llogging in to https://cloud.acrobat.com/exportpdf with your Adobe ID and password.
Let us know how it goes.
Best,
Sara -
WHO CAN/WILL HELP ME CONVERT FROM PDF TO WORD ?
WHO CAN/WILL HELP ME CONVERT FROM PDF TO WORD ?
Someone might. Are you having a problem? What have you purchased from Adobe, exactly, and where do you get stuck?
Maybe you are looking for
-
Printing from Macbook Pro to HP Photosmart Plus B210a
Hi, I am experiencing difficulty in printing documents from Macbook Pro to HP Photosmart Plus B210a. This has only been a problem for the last 2 weeks. I think this may be due the most recent update of OS X Mavericks 10.9.3. I have tried to update pr
-
Thunderbird PC conflicting with Android Pad when connected home
With Thunderbird running on PC and android Pad running in another room also connected to my email account (Pad doesn't have Thundrbird as we all know) . Every so often Thunderbird will not connect to email provider and ask for password. Which does no
-
Forms 4.5 and oracle 8 compatibilty
We are still working with oracle7.3.4 and forms 3. Now we are upgading to forms 4.5 and in the future we will upgrade to oracle8. I would like to know whitch vertions are compatble (oracle and developer)
-
Mc inside of urxvt makes system crash
have tried for like 10 times now. Whenever i start mc inside of a urxvt terminal my system crashes. Not even SysRQ is responding. Fun thing: if i start it inside of screen it works. It also works just fine in xterm. Any idea what might cause this?
-
Accessing CR through Infoview portal
Is is possible for users to access the Crystal Report which is based out of Salesforce.com data through Infoview web portal? If I install Salesforce.com driver for Crystal Report Designer and build a report and then hosted on XI-R2 environment, can u