Help convert HWS to LVM

Hey,
I'm a student at the University of New Hampshire. After talking with an NI Engineer for a while I found out that the equipment here is not capable of converting my hws files to lvm. Could someone with a newer version of LabView or any other method please convert these files to .lvm for me. I would really appreciate it, as I have to do a lab report by thursday.
Thank you so much,
Zach
for additional information
http://digital.ni.com/public.nsf/allkb/396B0B404275CEDB862571DE005250EA?OpenDocument
Also I tried attaching the files, but they don't have a proper extention. Other than direct email, I am not sure how else to get them to you.

What version of LabVIEW do you have? You can download a trial version of the most recent version of LabVIEW, or possibly get an inexpensive student edition since you're a student, and then run the VIs from the page to which you linked.

Similar Messages

Help converting pdf forms to a word document

Debbie
I need help converting a pdf form to a word document.

I just purchase adobe to be able to convert a pdf form into a word document but it is not working..

Help convert LV5.1vi to 8.x please.

Can someone help convert the vi at the link below to a contemporary version of LV?
http://zone.ni.com/devzone/cda/epd/p/id/558
I don't have anything old enough installed to open it. I don't even know what it is, but one of my users requested it.
Thanks in advance!
Chris
Solved!
Go to Solution.

Here it is in 8.2, though once you see it, I think you will find it would be easier to just use Read From Spreadsheet File.
Attachments:
parse_lookup_table.vi ‏23 KB

Help convert date

hi help convert date
April 26, 1904....August 12, 1979
to dd/mm/yyyy

SELECT CONVERT(VARCHAR(15),CAST('April 26, 1904' AS DATE),103)
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Download helper converts to .flv instead of .avi

since a few months when downloading a video from the same source, the download helper converts to .flv and no longer to.avi.
what do I need to do to have .avi?
Even if it downloads as .avi, it converts automatically to .flv .
Thank you for help.
Rgds pia

The first thing that you need to consider is whether or not
this project
will work well on the web. If you have to make a bunch of
compromises to
get it working on the web, then it may not represent you
well.
That said, you can use FLVs in Director MX 2004 with the
latest updates.
However, you can't stream the FLVs, you have to encapsulate
each one in
an SWF and then use the SWF. So if its the streaming that
you're after,
you may want to use QT instead. You can stream that.
Regardless of the video media that you use, you need to be
sure that you
aren't taking a smooth CD based experience and turning it
into a click
and wait, click and wait, less than elegant web experience.
If you want
to showcase your video capabilities then you may want to
build a web
specific tool. Or, you may want to let site visitors request
a CD to be
mailed to them.
Rob
Rob Dillon
Adobe Community Expert
http://www.ddg-designs.com
412-243-9119
http://www.macromedia.com/software/trial/

Need help converting from 4.0 to 2011

hello,
Need help converting files from 4.0 to 2011.
thank you
Solved!
Go to Solution.
Attachments:
noise source.vi ‏73 KB
8673D.vi ‏30 KB
8970 FREQ.vi ‏26 KB

attached as 8.2, which you can open
missing some subVIs - not sure if you already have them
Attachments:
8673D.vi ‏13 KB
8970 FREQ.vi ‏11 KB
noise source.vi ‏24 KB

Need help converting Client-Server to JSP

Hi;
I have a purely data driven, dynamic, meta driven program
in Java 1.4. Runs on almost any SQL database, and the
systems analysts can do most of the programming just by
entering the data. All screens and sql are auto-genned
at runtime.
I was wondering if there was anyone interested in helping
convert to JSP. I would be willing to give part of the
company profits. It is better then me asking a million
questions here, although there are lots of great experts here.
-Trent
Thanks.

My personal email address is [email protected] I would love to contact you if you drop me your phone number.
Manohar

Need help converting a PDF to excel

Need help converting a PDF to excel, the icon to convert dissappeared suggestions?

Open the file in Acrobat, use File --> Save As... --> Microsoft Word.
Mylenium

Converting tdm to lvm/ working with large amount of data

I use a PCI 6251 card for data aquisition, and labview version 8; to log 5 channels at 100 Khz for approximately 4-5 million samples on each channel (the more the better). I use the express VI for reading and writing data which is strored in .tdm format (file size of the .tdx file is around 150 MB). I did not store it in lvm format to reduce the time taken to aquire data.
1. how do i convert this binary file to a .mat file ?
2. In another approach, I converted the tdm file into lvm format, this works as long as the file size is small (say 50 MB) bigger than that labview memory gets full and will not save the new file. what is an efficient method to write data (say into lvm format) for big size files without causing labview memory to overflow? I tried saving to multiple files, saving one channel at a time, increased the computer's virtual memory (upto 4880 MB) but i still have problems with 'labview memory full' error.
3. Another problem i noticed with labview is that once it is used to aquire data, it occupies a lot of the computer's memory, even after the VI stops running, is ther a way to refresh the memory and is this mainly due to bad programming?
any suggestions?

I assume from your first question that you are attempting to get your data into Matlab. If that is the case, you have three options:
You can treat the tdx file as a binary file and read directly from Matlab. Each channel is a contiguous block of the data type you stored it in (DBL, I32, etc.), with the channels in the order you stored them. You probably know how many points are in each channel. If not, you can get this information from the XML in the tdm file. This is probably your best option, since you won't have to convert anything.
Early versions of TDM storage (those shipping with LV7.1 or earlier) automatically read the entire file into memory when you load it. If you have LV7.1, you can upgrade to a version which allows you to read portions of the file by downloading and installing the demo version of LV8. This will upgrade the shared USI component. You can then read a portion of your large data set into memory and stream it back out to LVM.
Do option 2, but use NI-HWS (available on your driver CD under the computer based instruments tab) instead of LVM. HWS is a hierarchical binary format based on HDF5, so Matlab can read the files directly through its HDF5 interface. You just need to know the file structure. You can figure that out using HDFView. If you take this route and have questions, reply to this post and I will try to answer them. Note that you may wish to use HWS for your future storage, since its performance is much better than TDM and you can read it from Matlab. HWS/HDF5 also supports compression, and at your data rates, you can probably pull this off while streaming to disk, if you have a reasonably fast computer.
Handling large data sets in LabVIEW is an art, like most programming languages. Check out the tutorial Managing Large Data Sets in LabVIEW for some helpful pointers and code.
LabVIEW does not release memory until a VI exits memory, even if the VI is not running. This is an optimization to prevent a repeatedly called VI from requesting the same memory every time it is called. You can reduce this problem considerably by writing empty arrays to all your front panel objects before you exit your top level VI. Graphs are a particulary common problem.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Help converting .wma to iTunes on a Mac.

I need help in converting thousands of .wma tracks to iTunes on my new MacBook Pro. Can anyone help me with this problem. I have a desktop at home which is IBM and my laptop is now Mac.

iTunes for Windows can import WMA files, but the Mac version of iTunes does not have that feature. If you can get the files onto your PC, just add them to iTunes (using Add Folder to Library or drag them in), and iTunes will import them automatically and save the new files to your Music folder. Do you have an iPod or other external hard disk you can use? That makes this process much easier.

I am a beginner at Final Cut Pro. Need help converting MPEG-2 to use.

I am a beginner at Final Cut Pro. I have mpeg-2 video footage that I am trying to import the footage into Final cut, but can't. I understand I need to convert the file format. I am unfamiliar with how to go about the converding file formats and the codec what is the best way to go about converting the file format so I can edit it on Final cut pro?

Where did the files originate? (How were they created?)
Some formats can be brought in with the help of plug-ins.
MPEG Streamclip can usually convert them to Quick Time.
Russ

Help converting a driver to version 6.1

The instrument driver network has a Keithley 220 driver for LabVIEW 7.0/8.0 but I have version 6.1. I attached the driver to this message. Is it possible to convert it so it will work with version 6.1? Thanks for any help.
I could use a driver for the Keithley 181 too, but I only found a LabWindows/CVI driver for it, so I assume that it can't easily be converted to LabVIEW and I didn't attach it. If I'm wrong about that though, let me know.
Attachments:
ke220.zip ‏19 KB

Never mind... I just found a driver at keithley.com, so I'll try that one out.

Need help converting PDF to a word document!

I paid to have the ability to convert a PDF document to a Word document. When I click on "convert" the area turns gray, and nothing happens. Once before, the document converted, but it did not come out the same. For example, the charts did not convert at all. Any help will be appreciated.

You need the ExportPDF Forum

Help converting pages document with images over to a 300 dpi jpg file

Hi
I'm pretty new to using Pages. I have created a 4 page Pages document with a lot of iphoto images. It's for a elementary school yearbook. The publisher ulitmately needs a 300 dpi jpg file.
How do I convert the pages document into a 300 dpi jpg?
I tried to convert it first to a pdf then to a 300 dpi jpg but when I sent that file over, they said that when they zoomed in, the images all looked blurry.
Any ideas on what to do without having to start all over again? Worst case, I guess I can print out in best quality, scan and save as jpg but there's got to be an easier way.
I'm not a graphic designer, just trying to fuddle my way through so you'll have to go easy on me with the techno speak. Any cliff notes for mac beginners?
Thanks much in advance for any help!

The conversion isn't perfect between Pages and Word. The same font is handle differently in the two applications and so are many other things too. If you are concerned about how it looks use Pdf versions instead.

I need help converting a PDF to a word file. I purchased Acrobat for this purpose?

I need help using this download. I purchased Acrobat because I need to convert a PDF file to a word file. Can you give me instruction on how to do this.
Thank you,

Open the file in Acrobat, use File --> Save As... --> Microsoft Word.
Mylenium

Help convert HWS to LVM

Similar Messages

Maybe you are looking for