HELP! Converting fonts for preflight and end user review

I want to make sure the fonts are either embedded or linked to the doc so the end user can review my file. Once it is ready for print, what are the steps to make it print friendly?

If the client needs to edit the file, you need to send the original InDesign file. You can use the Package command in the file menu to gather all of the fonts (other than CJK or restricted fonts -- you'll see the warning) and images required for printing into folders along with the document. This does not alter the licensing requirements, though, that the other user must have their own license for each of those fonts to install them (which is why PDF is a much better solution in General as most fonts worth using allow embedding for viewing and printing in a PDF), as well as a copy of InDesign.
Peter

Similar Messages

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

Administrator and End user Permission

Hello Everybody,
How Administrator permission is different from End user permission, i cannot see any major changes if i assign or revoke those.
2. If i have assigned role assigner permission to a user who does not User administrator or any other administrator rights, how he is able to assign role to other user.
I have read on help.sap.com, but unable to understand.
regards
Santosh

Hi Santhosh,
1. The Name itself tells us the Difference .
 "Administrator" ->
 There r 3 types of Admn here
 a) "Content Admn" ( he is the one Who can create Iview / Role ..)
 b) "User Admn" ( he is the one who can Create Users and Assign Roles to the Users)
 c) "System Admn" ( he can change the System Properties ..Like Layout ,sys alias etc )
and End User is the one who doesn't have any of the Admn Roles . A default user may contain Only EU_ROLE
2.
 If u r a developer u must have Content Admn
 and for the basis guys must have User Admn and Sys admn.
Hope it helps .
Regds,
J

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

Appraisal - tcode access to core and end users

Hi Experts,
Please let me know which transaction code access is to be given to Super Users, Core Users and End users from the list below.
And also, Please let me know if I have missed out any transaction codes related to Appraisals.
T codes for PMS Basic Setting
OOHAP_BASIC           Basic Appraisal Template Settings
OOHAP_CATEGORY           Appraisal Category Settings
OOHAP_CAT_GROUP     Category Group Settings
OOHAP_SETTINGS_PA    PA: Settings
OOHAP_VALUE_TYPE     Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
This is very urgent..Your immediate response is highly appreciated.
Thanks!

Hi,
End users are authorized with
PHAP_CHANGE Change Appraisal Document
PHAP_CREATE Create Appraisal
PHAP_PREPARE Prepare Appraisal Documents
the T.codes
where they can prepare appraisals, if mistakenly entered wrong appraiser or appraisee they can edit
For other activities administrators must have autorization
Regards
Ratan Puli

Need of SAP Equipment and Tooling Managemt Config and End user documents

Hi
I am in implementation project of SAP PM - ETM (Equipment and Tooling Managemt )
Can any body please send Config and end user documents if any?
I am in urgent need of those documents
Thanks in Advance.
SR

Hello Jackie,
The new features are outlined in the Installation Guide (page 10.)
The most noticable to the end-users would be the security settings and the different views such as Hierarchial and Tree views
which can be customised.
Best Regards,
Jude Bradley

Cisco ISE User Authentication Certificates for Wired and Wirless Users (BYOD)

Can any one tell me from where we can purchase User Authentication Certificates for Wired and Wireless Users (BYOD) for Cisco ISE. Also Confirm what certificates we required for the purpose.
Please suggest the Website form where we can purchase and ipmort in Cisco ISE certificate Section.
Thanks.

Dear Mohana,
Thanks for your reply, Can you please confirm me in regards EAP-TLS certificate, which authorities you recomend if i go to Go dadday or very Sign to buy it and then import in ISE.
Looking forward for your reply.
Regards,
Muhammad Imran Shaikh
Resident Engineer, IT Network Section - PPL
Mobile : 0092-312-288-1010
LinkedIn : pk.linkedin.com/pub/muhammad-imran-shaikh/10/471/b47/

HT1498 Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!

Horrible experience and the movie kept stalling through iTunes on appletv. Gave up (after paying for it) and ended up renting it through cable provider. Anyone know how to get $ back from apple?!

Issues are usually network related
What is your internet speed? www.speedtest.net
6mbps is required for instant HD (you can switch to SD in the settings)
If on wifi try ethernet and www.istumbler.net to rule out interference
Make sure you're using your ISP's DNS

How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

This is not really a Numbers question. I will provide an answer but suggest you make the question relavent for the forum where you post.
1) Open the PDF in Preview
2) select the menu item "View > Thumbnails"
3) select the page you wnt to share
4) copy (by using the key combination <command> + c OR select the menu item "Edit > Copy"
5) select the menu item "File > New From Clipboard"
6) save as a new name
7) share the new file

IW31/32- Change Date Restriction choices for "StartPoint" and "End"

Hello,
In IW31/32> Operation tab> then "Dates" screen.
Is there a way to change Date Restriction choices for "StartPoint" and "End."
Start Point: there are 4 choices: Must Start on, Cannot start before, cannot start after, start from resource planning
End: Must finish on, Cannot finish before, finish not later, finish from confirmation.
We want to limit the choice to 2 optiions on Start and End/ in addtion change the text.
Is this possible.
Thanks,

Hi,
No its not possible to accomplish this in standard using configuration functionality.
You may able to accomplish restricting the values on the drop down through the implicit enhancement functionality available in ECC 6.0.
You will have to make a screen modification to make the associated start point/ end point key text editable.
Regards
Narasimhan

Terminal key bindings for Home and End

I am recording this here in the hope of savings others some time.
It is often stated that the following Terminal key bindings have to be asserted to get Home and End keys working as intended:
\033OH
\033OF
I find this misleading as it is neither what most people would type nor what they would see.
I type:
escape O H
escape O F
This results in:
\033oh
\033of
which works as intended but using 'shift' to produce the capitals depicted in most notes about this will not work.

My default bindings did not work for home and end but page up and page down inexplicably worked with shift. The image below shows the keys and their bindings (eg \033[5~ and \033[6~ stated here for Google!) I applied to Terminal to make home, end, page up and page down behave in the same way as many other applications including iTerm. Remember to type 'esc' to get '\033'.
I started out trying to improve the readability of large manual pages (eg man bash). Whilst the changes above improved things considerably I have now found better alternatives.
I tried iTerm - the keys worked correctly but inconsistencies between the various window size settings did not inspire confidence.
I now use ManOpen.app which I have configured to open when I type eg 'm chmod' in Terminal - I changed the name of openman to m and put it together with openman.1 in /usr/bin. The pages scroll normally and have hot links to other manual items. This is a simple way to vastly improve manual reading. The only slight negatives I have found are:
1 - two preference panes will not open - defaults OK for me
2 - window positions not remembered - since size can be set I can live with this
3 - text cannot be set to soft wrap to window width (misnamed zoom by some applications).
I would be interested to hear if others have found better ways of viewing manuals.
Here are some interesting pages:
http://en.wikipedia.org/wiki/Tableof_keyboard_shortcuts#Command_lineshortcuts
http://www.tuaw.com/2008/03/07/here-comes-your-man-viewer/

Customization and End user Prt for Consignment Porcess

Hi,
I want to implement consignment process in our system developemnt server first can u give the detail steps of customization part as well as end user part to implemnt the consignment process with Invocie settlement detail and also material master.
regards,
zafar

Hi
Cretae a consignement info record
then create a PO with Item category K
Do the GR-101K, it will update in vendor consignement stock
then 411 k will take the same to company unrestricted stock
MRKO for settlement
IN SPRO>Materials Management>General Settings for Materials Management>Activate Consignment Prices via Info Records
Regards
Amuthan M

Date Span - Validation for start and end date parameters in Crystal reports

Hi,
I am new here and am unsure if this is the right place to post this issue. If so, I apologize for that.
I am working on Crystal Reports 12 and don't know if it is possible; to validate the parameters - Start Date and End Date are within a specific span of time. For Eg. Start Date and End Date should be within 6 months or Start Date should be a future date.
Can we prompt that parameters entered are invalid and have users re-enter it?
I will really appreciate any help into this issue.
Thanks Much,
RP

Hi,
Well, it is not possible to validate the date/datetime values in the prompt window, however there are other alternatives.
One of them is to create an Alert with the condition:
datediff("m",Minimum({?DateParameter}),Maximum({?DateParameter})) > 6
//This is to check if the start date and the end date are within 6 months
Another way of doing this is by displaying a message on the Report Header and suppressing all other sections if the date range values do not meet the condition.
Hope this helps!
-Abhilash

Looking for browser-based, end user ad-hoc reports

Hi all. We have need for an easy to use, browser based end-user reporting tool that can be hosted by CF10. We are spending a fantastic amount of time building custom tabular reports for our client and would prefer to give them a tool in our app that let's them build reports whenever they want. Do any of you know of any good reporting tools where the end-user could build their own reports?
Thanks for your help.
-Andy

Hi Andy,
You could try JReport. Its a reporting and data visualization tool that let's anyone of any skill level create and modify their own reports and dashboards. You can even embed them into other applications. Let me know if you want to chat about it.
JReport website: www.jinfonet.com
-Dean
dyao (at) jinfonet.com

Custom functionality for home and end keys?

I don't know anything about automate, but I was wondering if it's possible to do this:
I'm a former PC user and on PCs you could use the 'home' and 'end' keys to go to the beginning and end of one line (subsequently, you could hold shift + home/end to highlight from your current cursor position to the beginning or end of a line). This functionality is extremely helpful for text editing and programming. Luckily the versions of Word and Dreamweaver I have on mac do use this, but TextEdit, Flash, and others do not. Is there anyway to program this kind of functionality? And if so how? And why is basic functionality like this different program to program on macs? PC's were at least consistent. Thanks!

The Command and Option shortcuts will take some getting used to, but that will work. Thanks! an external text editor would be okay for some things, but not Flash ActionScripting within a flash file.
I just wish some of the more basic functions between mac and pc were the same. I think both platforms would have an easier time getting users to switch if they were a little more consistent and took some of the good features of each into consideration.

HELP! Converting fonts for preflight and end user review

Similar Messages

Maybe you are looking for