Help! Corrupted Clip Speed after Copying to New Hard Drives

Okay. Here goes... (sorry so long)
I bought two new hard drives to replace older aging ones as a precaution (for a Feature Film)
After transfering capture scratch and sequences-- every speed altered clip (50% was now 1000%) OR the in points and out points are not being recognized and have jumped to new spots in the clip (with the corruption)
I transfered 1st half of film buy hand-- Corrupted.
I transfered 2nd half using media manager-- Corrupted.
Two different hard Drives-- two different ways of trasfering-- same problem!
(also, no matter what I do to return the clips to their orignal state-- they remain screwy!)
-The "Constant settings" won't stay Constant and keep fliping to Varible. I stretch it out, speed drops to 10%. I drag the end of clip toward head, speed increases.
Then the clip goes black!
-I deleted Render Files.
-I removed attributes.
-In Time Remap there were mysterious Keyframes that were the culpruts. I deleted but they fought being deleted.
I bought a ANOTHER Hard drive thinking the Brand I bought was not compatible with MAC (Mercury) -- Same problem with newest hard drive.
Phew!
What is Going on??????!!!!!! Can ANYONE help Me???????

Keep CALM? If you knew what I've gone through to make this project...! Two YEARS! I've been working on this for two crippling years!!! I'm just about to finish... and tradegy strikes!!!!
I wasn't calm at the time... I am now. (thanks to Jack Daniels-- and five minutes of beating my head on a wall)
I tried the new sequence thing. Didn't work.
Regarding the FCPrescue program you speak of. I downloaded a similar one called FCPattic-- there are no instructions for either program on how they work... I have no idea what it did, but I pushed the backup button, but I don't know what was supposed to happen or where to retrieve any back up info...(?)
Re: Trashing Preferences:
There are two files in the preferences folder...
1. "com.apple.finalcut.plist"
2. "final cut preferences" (which has a red and black icon)
I don't know which is the one I should trash?
Can you give me some insight?
Thanks for responding, Andynick.

Similar Messages

Help! Help! Help! Can not reinstal vista after replacing a new hard drive

Can not reinstal vista after replacing a new hard drive (1TB WD 10EZEX) in HP Pavilion a6658f Desktop PC with recovery disc.
I saw in the screen:
"Windows setup could not configure windows to run on this computer's hardware"
Product:
HP Pavilion a6658f Desktop PC
OS: pre-installed window vista with sp1
Product number: FK575AA
Bought in Canada
Thank you.

Thank you so much Lisa27,
win vista installed to new WD 1tb hard drive. How?
1. use http://support.wd.com/product/download.asp?groupid=606&lang=en
>Data Lifeguard for Windows , write zero and to test the new hard drive,
2. use Acronics true image 2013 to do partition on the new HD, and then to clone from the old HD to new HD.
3. down load Intel Rapid Storage Tech to fix the Issues with Windows Vista* and Intel® RAID (without it, Window mail can not be opened.
Thank you very much for all your guys again and the support form WD support team.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Setting up time machine/time capsule after fitting a New Hard Drive.

I have replaced my hard drive in my imac 24inch and restored the system from my time capsule. My question is now my time machine is trying to back up to my time capsule but it is already 3/4 full from the old drive in my imac. How do i best set up my time capsule with time machine after installing a new hard drive in the imac. I was hoping that i would restore the system and I would still be able to (after pointing time machine to my time capsule) access old files if needed in time machine. It has presently deleted a lot of older backups but still cannot fit it all in as it just sees a new hard drive worth of info and is attempting to back it all up on my time capsule.

wjosten wrote:
Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk. However, whenever I swap out a disk I do exactly what you do. CCC to get the ol drive onto a new one. Test by starting up to the new (but still external drive). Then replace the internal drive.
I usually just sell the old drive on eBay. My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me. The price of large external drives is almost the same as smaller internal ones.

I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code ERROR 150:30. Any ideas?

I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code ERROR 150:30. Any ideas?

Did you use migration assistant to copy over programs, documents, and settings? You can't do that with PSE. Elements is not a tidy package in accordance with the apple developer guidelines. The installer strews stuff all of your hard drive in place the migration assistant isn't programmed to look and you can never hope to find all h the bits. You must always install PSE from scratch on a new machine. By attempting to copy it you have made a lot of trouble for yourself.
You will need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and then you can go around and manually remove what you can reach. Look in applications, your hard drive>library>application support>adobe, your username>library>preferences. In the user library also delete any saved application states for PSE.
Then you can reinstall from scratch.

What to do after installing a new hard drive on inspiron 1525

after installing a new hard drive on my inspiron 1525 I place the drivevers and utilities driver on the cd/dvd player drive, chose boot from cd/dvd drive, and I get this message
your cd/dvd drive during this boot cycle is f:
a RAMDISK drive is available for this boot cycle as C:
it contains several hard drive setup tools. Please use these tools only under the direction of dell support staff.
F:\>
What do i enter after F:\> ?????????
<ADMIN NOTE : Email Id removed per Privacy policy>

Hello Warren,
To understand the issue and help you further, I would request you to help me with few details about the issue.
-- What exactly is happening when you turn on the computer?
-- Do you see a black screen with a blinking cursor?
-- What is the Operating System?
-- What is the System Model?
Run a hardware diagnostics to check if there is any hardware failure.
-- Restart the computer.
-- Keep tapping F12 key on the Dell Logo screen.
-- From One Time Boot Menu, select Diagnostics and press Enter.
-- If the test fails please capture the Error Code and write back to us would be glad to assist with the next course of action.

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

After installing a new hard drive can I install snow leopard directly from snow leopard disc

After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)

HT1727 i copied itune music from old hard drive to memory disk the copied onto new hard drive into itunes and music wont play unless removalbe disk is inserted

i copied itune music from old hard drive to memory disk the copied onto new hard drive into itunes and music wont play unless removalbe disk is inserted

Then your iTunes must be looking at the removable disc, not your hard drive. Did you actually copy the songs onto your computer, or simply tell iTunes to look at the removable drive?
Highlight a song and click on File/Get Info/Summary>Where and check the location that iTunes has listed for the song. What does it say?

I cannot access an older time machine backup after installing an new hard drive.

After installing a new hard drive I tried to access my older backups in time machine but cannot. They are there but do not light up and allow me to access them, or select them.

First, if you're worried about the possibility of losing a backup set, then your backup strategy is inadequate. You will certainly lose those backups, no matter what you do, when the drive hosting them fails, as it will eventually. If you take data safety seriously, you should have at least two complete, independent backups of all your data, one of which is off-site at all times. I suggest you make a second backup now, before doing anything else.
The action I suggested won't delete all the snapshots; only the selected one -- unless something goes wrong, which is always possible. Without adequate backups, nothing you do is safe.

HT1391 cant play my music in itunes after copying to larger hard drive.

cant play my music in itunes after copying to larger hard drive.

I'm guessing you moved rather than copying.
What steps exactly did you take?
If you moved the iTunes Media folder from <User's Music> iTunes to some random location then that is wrong way to do it. You haven't complained of an empty library so I'm guessing that's what you did.
What generally works is to move the entire iTunes folder to say X:\iTunes, and then hold down shift as you start iTunes. You should get a prompt asking you to choose or create a library. Click choose and browse to the moved library.
If you moved just the media folder then move the main iTunes folder, shift the media folder inside, then shift-start-iTunes. It should all come together.
tt2

How to change computer user name after installing a new hard drive on my computer. HELP

TO WHOMEVER CAN HELP ME:
How do I change my computer user name after HP installed a new hard drive on my computer. Now it is called TEST?? So on my C drive instead of saying my name it says TEST. Please help???
Thanks in advance for any help I can get.
Christina

Hi, Christina:
Go to the control panel and then to user accounts. Select the Change Your Account Name option. Change the account name from Test to Christina.
That should do it for you.
Paul

How to use Time Machine before and after installing a new hard drive

So basically I'm buying a new hard drive for my Macbook pro and I have a lot of files on my computer that I would like to save. I have never used Time Machine before so I need help on how to set it up before AND after installing the harddrive so my files get transferred onto the new hard drive. Thanks in advance

wjosten wrote:
Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk. However, whenever I swap out a disk I do exactly what you do. CCC to get the ol drive onto a new one. Test by starting up to the new (but still external drive). Then replace the internal drive.
I usually just sell the old drive on eBay. My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me. The price of large external drives is almost the same as smaller internal ones.

Please help! Cannot access TC backups on new hard drive with Lion!

I know this seems like a generic posting, and believe me that I have searched through countless posts to find the situation most similar to mine. To start, the basic story (I am pretty computer illiterate, so excuse the lack of terminology):
-My computer was working slow, beach balling, etc. two weeks ago - took to Apple Genius Bar for help and they suggested need for new hard drive. I already had a hard drive crash in January, but since I have had a Time Capsule running Time Machine since September 2009, I hooked it right up and restored from a backup with no issue... so I wasn't worried about this. I waited to make sure that I had the most recent backup (and needed to use my computer for law school for a couple days), so I turned it in a day later immediately after a complete incremental backup via TM on my TC.
-Got my computer back from the Apple "depot" with new hard drive and hard drive cable.
-Had an extremely hard time getting my TC to link to my computer and via AppleCare phone help, realized that Apple had given me back my computer with Leopard, and they said that I needed to go back to the store to get a Lion reinstall since the backups had been done in Lion.
-Went back to Apple store, reinstalled Lion... they told me there would be no issue once I got home and hooked up to TC. Connected to TC via ethernet and went through "set up" procedure as if it was new computer - could never get past the "Select the Disk" page. Either it was beach-balling or just sitting there, and I couldn't click continue or anything.
-Called AppleCare again, they said to try it through Migration Assistant instead of Set Up... again, could not connect to TC. They said it was too complicated to do over the phone and sent me back to the store...
-By now, I am on vacation and spent 5, yes FIVE, hours at another store trying to migrate the data to no avail. I obviously don't know everything they tried, but I know they tried installing each operating system since Leopard, going through set up and migration assistant, and doing a disk repair of the TC. None of this worked. Every single time my TC connects and you can see the title of the drive ("Data") and the two separate backups ("emilysmac" was my old computer and "emilysmacbookpro" was the dummy one we tried to make). Emilysmacbookpro was accessible with no data on it, but once we clicked on emilysmac it just said "connecting" forever and never did anything.
Basically:
-300GB of my TC shows that it has been used, so I know something is there.
-I can also pull up the data on another computer, and it shows files dated from September 2009 up to the date I last updated, but they do not look how they used to - they are "Unix Executable" files and cannot open through Time Machine.
I have a really hard time thinking that my TC AND my computer hard drive failed at the same time - which is actually what Apple suggested to me. Is there anything that anyone knows that will help?! I am desperate here! This TC had backups of all my music, pictures and law school work over the past 2.5 years. Any help would be much appreciated!

PS I have also looked through Pondini's site, but I am not sure if I am missing something since I don't totally understand all of it. Thanks again!

I need help re-installing my OS on a new hard drive. Having MAJOR issues with this simple task.

I have a MacBook Pro 15" (mid 2009) I recently needed to get a new hard drive for it, the old one stopped working. It came with OS X Snow Leopard already installed from Apple, and it also came with the install disks. I have booted up using the install disks and put OS X Snow Leopard back on the computer.
I tried booting with a USB install disk of OS X Lion (10.7) but had no luck on multiple occasions. It would only get through the initial step of the install and then say it couldn't download additional components needed for OS X
So finally, I decided to try a full erase and reformat of my brand new hard drive (less than a week old) and stated with the basic software that came with the computer. Installing that worked fine, until I tried to do a software update through the built in program. My computer refused to download 10.6.8 from the apple servers, so I had to find it on a 3rd party website. Once I found it and downloaded it, I finally got it installed. There were 12 more updates after I did 10.6.8 and none of them worked when I tried downloading and installing as a group. I had to do each one individually, the last one being a security update.
Up to this point, the Mac App Store didn't work (even after the 10.6.8 update), I couldn't download any of my previous purchases. I needed to download lion, to see if having it on the Mac hard drive itself would help with the install, but I couldn't do that until after the security update.
Other than that, the Mac worked normally except for during each start up, the apple logo would flash along with the forbidden sign and the folder with a question mark on it. It flashed for a few seconds randomly, then would boot up normally or say that my computer would need to be restarted.i figured this issue would be fixed after I successfully installed lion.
FINALLY I got the App Store to download lion, and began the install process. Halfway through the install, it failed and when I tried to restart the computer, it continuously flashes through those three symbols at startup. I can't get it to do anything else. I'm so ****** off I'm ready to just sell it for parts.
My questions are:
      1. Can I install OS X Lion OR OS X Mountain Lion clean from the start after a full format of the hard drive?
      2. How do I go about installing clean and get my computer to stop flashing those symbols during start up?
*I have performed the Apple Hardware extended test and all systems are reporting normal function*

Okay, so, fast forward from July to now -
- I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
- My computer spent at least 8 hours behind their closed doors in the workshop
- Several complete erases of the harddrive have taken place
- Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
The good news is:
- They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
- They believe that my problems stem from either 1 of 2 things:
        - Faulty Hard Drive (even though it is brand new)
         - The wrong build of software being installed.
Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
- Andrew =)

Help! Corrupted Clip Speed after Copying to New Hard Drives

Similar Messages

Maybe you are looking for