Help Creating an Adjustable Grid?
I have some experience in flash and actionscript, but not much beyond the classroom in a book tutorials, etc.
I am working on an idea and just need a little help figuring out where to begin.
I would like to create a simple 2D interactive grid. The user should be able to increase and decrease the number of axis (both X and Y simultaneously) that compose the grid, and also the scale of the grid itself (Zoom in and Out).
If this goes well enough, I would like to be able to plot graphical content on the grid that visually changes as the grid itself changes. They should, in some way, be linked to one another and correspondingly affected by the same two parameters. This, however, would be a second step. I am more concerned with the base grid model at this point.
ANY help would be very much appreciated!
It is not clear from your post what exactly you need to do. Perhaps some visual (simple image) will help us understand your vision and use cases.
Meanwhile, I have a post on my blog about how to compose dynamic grid:
http://flashascript.wordpress.com/2010/12/25/arranging-objects-into-2d-dynamic-grid-with-a ctionscript-3/
The same principals can be applied to drawing other grid related visuals.
Similar Messages
-
Help Creating a Dynamic Grid?
I have some experience in flash and actionscript, but not much beyond the classroom in a book tutorials, etc.
I am working on an idea and just need a little help figuring out where to begin.
I would like to create a simple 2D interactive grid. The user should be able to increase and decrease the number of axis (both X and Y simultaneously) that compose the grid, and also the scale of the grid itself (Zoom in and Out).
If this goes well enough, I would like to be able to plot graphical content on the grid that visually changes as the grid itself changes. They should, in some way, be linked to one another and correspondingly affected by the same two parameters. This, however, would be a second step. I am more concerned with the base grid model at this point.
ANY help would be very much appreciated!It is not clear from your post what exactly you need to do. Perhaps some visual (simple image) will help us understand your vision and use cases.
Meanwhile, I have a post on my blog about how to compose dynamic grid:
http://flashascript.wordpress.com/2010/12/25/arranging-objects-into-2d-dynamic-grid-with-a ctionscript-3/
The same principals can be applied to drawing other grid related visuals. -
Hi again. I need to know if it is possible to create a visible grid inside a BorderContainer and make draggable objects in it snap to grid.
This is the code for my BorderContainer:
<s:BorderContainer x="10" y="10" width="853" height="581" backgroundColor="#F0EEEE">
<s:BorderContainer
width="630" height="394" x="33" y="155" borderVisible="true" dropShadowVisible="true" borderColor="#E1E1E1">
<s:layout>
<s:BasicLayout/>
</s:layout>
<s:RichEditableText id="MyAddress"text="my address here" fontSize="12" mouseDown="MyAddress.startDrag();" mouseUp="MyAddress.stopDrag();"mouseOut="resetHandler(event)" mouseOver="clickHandler(event)"x="114" y="64" fontFamily="Verdana" textAlign="right"/>
<s:RichEditableText id="MyWebsite"text="my website here" fontSize="12" mouseDown="MyAddress.startDrag();"mouseUp="MyAddress.stopDrag();"mouseOut="resetHandler(e vent)" mouseOver="clickHandler(event)"x="115" y="158" fontFamily="Verdana" textAlign="right"/>
<s:RichEditableText id="MyPhone"text="my phone here" fontSize="12" mouseDown="MyAddress.startDrag();" mouseUp="MyAddress.stopDrag();"mouseOut="resetHandler(event)" mouseOver="clickHandler(event)"x="125" y="82" fontFamily="Verdana" textAlign="right"/>
<s:RichEditableText id="MyFax"text="my fax here" fontSize="12" mouseDown="MyAddress.startDrag();" mouseUp="MyAddress.stopDrag();"mouseOut="resetHandler(event)" mouseOver="clickHandler(event)"x="146" y="99" fontFamily="Verdana" textAlign="right"/>
<s:RichEditableText id="MyMobile"text="my mobile here" fontSize="12" mouseDown="MyAddress.startDrag();" mouseUp="MyAddress.stopDrag();"mouseOut="resetHandler(event)" mouseOver="clickHandler(event)"x="124" y="116" fontFamily="Verdana" textAlign="right"/>
<s:RichEditableText id="MyEmail"text="my email here" fontSize="12" mouseDown="MyAddress.startDrag();" mouseUp="MyAddress.stopDrag();"mouseOut="resetHandler(event)" mouseOver="clickHandler(event)"x="132" y="133" fontFamily="Verdana" textAlign="right"/>
<s:RichEditableText id="MyName"text="my name here" fontSize="24" mouseDown="MyName.startDrag();" mouseUp="MyName.stopDrag();"mouseOut="resetHandler(event)" mouseOver="clickHandler(event)"x="50" y="23" fontFamily="Verdana" textAlign="right"/>
<mx:Image x="254" y="280"
source="images/your_logo.png"
mouseDown="img1.startDrag();"
mouseUp="img1.stopDrag();"
mouseOut="resetHandler(event)"
mouseOver="clickHandler(event) id="img1"
complete="smoothImage(event)"/>
</s:BorderContainer>http://www.projectseven.com/products/galleries/hgmagic/features.htm
"FarkingIsehole" <[email protected]> wrote
in message
news:eij22t$a5$[email protected]..
> Hi, I'm new here and I hope this is the right place to
ask this question.
> I
> need to create a thumbnail grid for my eBay item
>
> I'd like it so when a user clicks on one of the thumbs
it will show that
> picture in a much bigger window to the right of the
grid.
>
> Please see this webpage for a picture of what I'm
talking about:
>
http://www.mpire.com/products/builder_galleries.html
>
> Any help would be greatly appreciated.
>
>
> Can someone please help out.
> -
Need help creating illusion of a long road going off into the distance...
I can't for the life of me seem to figure something as simple sounding as this out... I've spent 2 whole days now working with every different program in the CS4 Master Collection and am ready to shoot myself.
I'm trying to create a nice banner and in it is a street sign and the road it's naming going off into the distance as if you were standing on the road looking straight down it forever into the vanishing point.
For some stupid reason this is the hardest illusion of all. In PS CS4 I create a really long Road as a Smart object,and then try to turn it into a 3d postcard so I can rotate it, but only the part that is seen within the boundaries of the Banner renders in 3D, the rest of the layer that hangs outside the border is cropped.
I want to be able to put a light on it and texture it to make it look realistic, other wise I would have just drawn a triangle with lines on it. So I try using After effects to at least handle this part. I created a really long (20,000 px) road in Illustrator, ported it into AE, but AE kinda does the same thing, I am only able to see a piece of the road, the ends are invisible, so only the middle, say 5,000 px of the road are rendered when I rotate it into the plane I want!
Is there a tutorial or something that can help me achieve a realistic looking long road?
Thanks All
AzaMy advice is to use good old perspective transform, along with Scale and maybe distort to change the vanishing point. Edit/transform/perspective. These transform parameters are very easy to work with and will create a good visual perspective. Not a good idea to use Warp or Liquify because this will throw your perspective off. Best thing to do is light the image from above before transforming. This is an excellent use for Smart Objects.
Another slightly more complex way is to use the vanishing point filter. Copy your flat road and paste it into a carefully created vanishing point grid.
Getting into the 3D tools for a simple task like this, just creates more things that can go wrong, as you have discovered. -
Problems Creating a "Fluid Grid Layout" with Adobe Dreamweaver CS6
I am trying to create a fluid grid layout in Dreamweaver CS6 (which I know how to do), the problem is Dreamweaver started automatically saving the boilerplate.css & respond.min.js in the Dreamweaver program folder (C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration\BuiltIn\Fluid Grid Layout\) it does not ask me to save the boilerplate.css or the respond.min.js docs as it normally does. Dreamweaver CS6 also creates a css document instead of the html page it should create. I called Adobe support, however they offer no support for "Fluid Grid Layouts", and I cannot seem to find a solution to this problem anywhere on the internet. If anyone knows how to fix this so it will work properly again it will be greatly appreciated!
Hi toger02,
If you have restored the preferences correctly and the issue is still unresolved I would recommend checking the workflow again.
Define a new site in Dreamweaver.
File < New Fluid Grid Layout < Create. Doctype set to HTML5 and no CSS file attached.
A dialog box will pop up, prompting you to save the CSS for this design. This is your custom style sheet. Give a "filename.css" < Click Save.
Once you've done that, the layout for the mobile device appears in the design view as an "untitled" new document with related files listed as "boilerplate.css","respond.min.js" and "filename.css" i.e your custom CSS file.
File < Save < "filename.html". < Save. On clicking Save it will show a popup with the message: Copy Dependent Files, which are boilerplate.css and respond.min.js.
I hope this helps else let us know if issue is on all the new sites and fluid grid pages that you create?
Thanks,
Bhawna -
Unable to Create local Adjustment in RAW
I was editing my images on RAW when all of a sudden I guess I pressed an incorrect key (yeah you know those split seconds where something happened and you dont know what you did) and now everytime I want to use the Graduated Filter tool or the Adjustment Brush tool and I press on top of the image it gives me the following message:
ERROR:
Unable to Create Local Adjustment. All the local adjustment controls are set to have
no effect on this image
It doesnt work on ANY raw images now, I tried pressing "Reset Camera Raw Defaults" and it still doesnt work.
Is there a setting that I moved without noticing??
At the time this happened I had 6 pictures on camera Raw I had synchronized them and I was doing small adjustments to one of the images, I had finished using the Graduated Filter tool on an image when then all of a sudden it stopped working
Thank you for your help!! I need to finish this project today and now I am going to have to sit and wait to resolve. Thanks againgolftragic wrote:
I'm having the same 'Unable to create local adjustment …' problem too. But I don't understand the answer, specifically what 'values' should be modified, where do I find them to modify, and what kind of modification. Apologies for my ignorance, but I can't find anything despite searching the forums as well as I can.
Values on the sliders in the box on the right of the picture.
And next time try F1 before you waste time using the clunky forum search. -
Help - Creating a Custom Layout
Hy, I'm creating a Grphical Programming Language,
where user draw flowcharts by linking buttons.
My problem is:
After adding some buttons on the panel,
the scrollBars does not appear.
(I have set layout to be NULL so that I can add the buttons
at specific position on the pane).
I think I need to create a custom layout, but with a layout,
after adding buttons on the panel and position them to specific
location, when I maximize/restore the window, the buttons return
to their initial position.
Can anyone please send me the code for creating a custom layout (imagine
that you are drawing a flowchart by adding buttons).
NOTE: The buttons should stay at their position while maximizing/restoring
the window.
thanks in advanceHi,
I'm currently working in a project that for what I understood is quite similar to yours...
The way I solved the problem, was creating a virtual-grid. When the user adds the button, I have to methods (getRow() and getColumn())
that convert the mouse coordinates to row and grid numbers. Then knowing the row and the column, I multiply this values for the row
width and column height, and have the X and Y position where to add the button in the JPanel.
Here is some of the code:
public int getColumn(int x)//mouse coordinate x
column=(int)(x/COL_WIDTH+1);
if(maxColumn<column)
maxColumn=column;
return column;
public int getRow(int y)//mouse coordinate y
row=(int)(y/COL_HEIGHT+1);
if(maxRow<row)
maxRow=row;
return row;
}And then I add the component,
jPanelContainer.add(component,
new org.netbeans.lib.awtextra.AbsoluteConstraints((col-1)*COL_WIDTH, (row-1)*COL_HEIGHT, -1, -1));This is only an ideia. Since I have a lot of constraints with the blocks that I have to add, I first add the components to an array[][],
treat all the things in this array (like user deleted component, moves rows and columns, user added component, user moved component, etc...)
and then "send it to the sreen"...
Maybe I was a little bit confusing...
Hope it helps!
Regards,
ANeto -
How to create editable ALV grid/list
Hi,
I want to create editable ALV grid/list so that user can modify the data in the ALV.
And when user presses save button data will get saved in Z table.
I dont know how to create editable ALV so could anybody please help me regarding this?
Thanks & regards,
Sameer DhukeHI
check the demo programs BCALV_FULLSCREEN_GRID_EDIT
BCALV_GRID_EDIT
BCALV_TEST_GRID_EDIT_01
BCALV_TEST_GRID_EDITABLE
REUSE_ALV_GRID EDITABLE
ALV Grid editable fields
Just to make things a bit easy
In the layout,there is a property called edit, make it 'X' for the particular field whichever you want to make editable.
Hope this helps,
Suruchi
Message was edited by:
Suruchi Mahajan -
Create ticket through grid.
Hi Expert,
Is there any way to create ticket through grid control?
We have set alert through grid. we get an alert message through grid.
we need to implement the same alert should be converted into remedy.
Can you guys help me on this?
Thanks,Hi ,
When i try to register ticket templates i got a following error.
*[oracle@shbaorc09b bin]$ ./emctl register_ticket_template connector /u01/app/oracle/product/10.2.0/oms10g/sysman/connector/Remedy_Connector/templates/Remedy_DefaultCategory_LowPriority.xsl shbaorc09b 1159 GRIDBA1 sysman gridba1sysmanshire "Remedy Connector" "Remedy Connector" template1 template1*
Oracle Enterprise Manager 10g Release 4 Grid Control
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
log4j:ERROR No appenders could be found for category (oracle.sysman.connector.registry.api.ConnectorControl).
log4j:ERROR Please initialize the log4j system properly.
I can see the all the ticket template in /u01/app/oracle/product/10.2.0/oms10g/sysman/connector/Remedy_Connector/templates
I guess all the templated are already register thats why i can see all the ticket template.
please find the information below.
[*oracle@shbaorc09b templates]$ pwd*
*/u01/app/oracle/product/10.2.0/oms10g/sysman/connector/Remedy_Connector/templates*
*[oracle@shbaorc09b templates]$ ls*
total 128K
-rw-r----- 1 oracle oinstall 7.9K Apr 28 2009 Remedy_DefaultCategory_HighPriority_AutoClose_w_Wlog.xsl
-rw-r----- 1 oracle oinstall 6.4K Apr 28 2009 Remedy_DefaultCategory_HighPriority_AutoClose.xsl
-rw-r----- 1 oracle oinstall 7.4K Apr 28 2009 Remedy_DefaultCategory_HighPriority_w_Wlog.xsl
-rw-r----- 1 oracle oinstall 5.9K Apr 28 2009 Remedy_DefaultCategory_HighPriority.xsl
-rw-r----- 1 oracle oinstall 8.0K Apr 28 2009 Remedy_DefaultCategory_LowPriority_AutoClose_w_Wlog.xsl
-rw-r----- 1 oracle oinstall 6.4K Apr 28 2009 Remedy_DefaultCategory_LowPriority_AutoClose.xsl
-rw-r----- 1 oracle oinstall 7.4K Apr 28 2009 Remedy_DefaultCategory_LowPriority_w_Wlog.xsl
-rw-r----- 1 oracle oinstall 5.8K Apr 28 2009 Remedy_DefaultCategory_LowPriority.xsl
-rw-r----- 1 oracle oinstall 8.0K Apr 28 2009 Remedy_DefaultCategory_MediumPriority_AutoClose_w_Wlog.xsl
-rw-r----- 1 oracle oinstall 6.4K Apr 28 2009 Remedy_DefaultCategory_MediumPriority_AutoClose.xsl
-rw-r----- 1 oracle oinstall 7.4K Apr 28 2009 Remedy_DefaultCategory_MediumPriority_w_Wlog.xsl
-rw-r----- 1 oracle oinstall 5.8K Apr 28 2009 Remedy_DefaultCategory_MediumPriority.xsl
-rw-r----- 1 oracle oinstall 8.0K Apr 28 2009 Remedy_DefaultCategory_UrgentPriority_AutoClose_w_Wlog.xsl
-rw-r----- 1 oracle oinstall 6.4K Apr 28 2009 Remedy_DefaultCategory_UrgentPriority_AutoClose.xsl
-rw-r----- 1 oracle oinstall 7.4K Apr 28 2009 Remedy_DefaultCategory_UrgentPriority_w_Wlog.xsl
-rw-r----- 1 oracle oinstall 5.8K Apr 28 2009 Remedy_DefaultCategory_UrgentPriority.xsl[oracle@shbaorc09b templates]$
If i am able to see the ticket template in above path.
Is that means that all the ticket template or still i need to register it.
Help is much appreciated.
Thanks, -
Service desk error creating support message "help- create support message"
Hi
I'm customizing SM 7.0 SP Stack 15 service desk scenario. I'm in a VAR SAP, so It's a mandatory scenario.
I've done all basic settings from General Settings, Connection to SAP, Online Documentation, ...,
Business Partners, iBase, Basic BC-Sets for Configuration, Number Ranges. After them , for Scenario-Specific Settings-> Service Desk->Service Provider I've done all these steps. At SAP System Solution Manager, I've created solutions at dswp transaction and EW Alert are centralized these steps works. Transaction notif_create works and iBase are well mantained.
The problem is when I try create a support message from satellite SAP system. I logged With a SAP user which is BP, key user and has authorizations in a satellite system and I choose help->create support message, so a pop-up appears and I fill the fields, and I press button (Save/Send). An error appears:
Error in Local Message System: Access via 'NULL' object reference not possible. Message was Not Created
In order solve the error I review:
- The satellite SAP system is at the iBase installed components.
- I've Assign Number Range for ABA notifications at SLF1 transaction.
- I've Checked number range for Service Desk Message at SLFN transaction.
- I've configured ABA Message transaction DNO_CUST01, transaction DNO_CUST04
- (satellite system) Transaction sm30, table BCOS_CUST:
Appl. + Dest. + +
OSS_MSG W SM_SMGCLNT010_BACK CUST620 1.0
TST_CUS 0120009939
RFC SM_SMGCLNT010_BACK works, SM recollects EW Alert from this satellite system
- (satellite system) I logged with a SAP user with these roles:
SAP_SUPPDESK_CREATE
SAP_BC_CUS_CUSTOMIZER according SAP NOTE 834534
SAP_BC_CUS_ADMIN according SAP NOTE 834534
SAP_SV_FDB_NOTIF_BC_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN
All these roles are mantained.
- I've review SAP Notes 834534, 864195, 621927(I haven't applied this SAP Note because it's older)
Please could you help me?
Thanks and Regards
RaulHi,
When I try create a SAP message via help->create suuport message, I get the same error so I run help->create support message in a satellite system so I run help->create support message in Solution Manager
system. Also, a dump is generated in Solution Manager when I try create support message or from satellite or from solution manager.
========================================================================
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Date and Time 10.07.2008 10:17:26
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_BOR_SERVICE_PPF============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: " ").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" " "
"CL_BOR_SERVICE_PPF============CP" or "CL_BOR_SERVICE_PPF============CM004"
"PROFILE_CONTAINS_PARTNERDEP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
Information on where terminated
Termination occurred in the ABAP program "CL_BOR_SERVICE_PPF============CP" -
in "PROFILE_CONTAINS_PARTNERDEP".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 41
of the (Include) program "CL_BOR_SERVICE_PPF============CM004".
=========================================================================
Thanks and Regards
Raul -
I need Fusion help creating a demo of BRM JCA Resource Adapter
I need Fusion help creating a demo of BRM JCA Resource Adapter.
I know BRM well but am clueless with Fusion.
I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
My BRM docs say:
Installing the BRM JCA Resource Adapter ->
Software requirements
(yada yada install a bunch of BRM stuff I know how to do)
The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
(more yada yada about installing more BRM packages I know how to do)
Deploying and configuring the BRM JCA Resource Adapter ->
Overview of the BRM JCA Resource Adapter configuration procedure
The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
Deploying the BRM JCA Resource Adapter on an Oracle application server
The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
Application
JAR files
J2EE application server
classes12.jar, connector15.jar, and jta.jar
Oracle BPEL process
bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
BRM J2EE Resource Adapter
pcm.jar and pcmext.jar
Apache
xercesImpl.jar
If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Restart the application server or the J2EE instance.
After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Remove the following oracle.bpel.common entry (shown in bold below):
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
<oc4j-connector-factories...>
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
<oc4j-connector-factories>
Save and close the file.
Restart the application server or the J2EE instance.
For more information about deploying the adapter, see your application server’s documentation.
Connecting the adapter to BRM in Oracle AS
You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
Create as many connection factories as your system needs. For each connection factory, specify the following:
The JNDI location for the connection factory.
The connection pool to use.
How to connect to BRM by using these entries:
Entry
Description
ConnectionString
Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
DBNumber
Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
InputValidation
Specifies whether to validate the input XMLRecord:
True — The adapter validates the input XMLRecord against the opcode schema.
False — The adapter does not validate the input XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
OutputValidation
Specifies whether to validate the output XMLRecord:
True — The adapter validates the output XMLRecord against the opcode schema.
False — The adapter does not validate the output XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
LoginType
Specifies the authentication method:
1 — The adapter logs in to BRM by using the specified login name and password.
0 — The adapter logs in to BRM by using the specified service type and POID ID.
The default is 1.
UserName
Specifies the login name the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
Password
Specify the password the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
PoidID
Specifies the POID ID. This entry should be set to 1.
ServiceType
Specifies the service the adapter uses to log in to the BRM software.
The default is /service/pcm_client.
You have successfully configured the adapter to connect to BRM.I need Fusion help creating a demo of BRM JCA Resource Adapter.
I know BRM well but am clueless with Fusion.
I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
My BRM docs say:
Installing the BRM JCA Resource Adapter ->
Software requirements
(yada yada install a bunch of BRM stuff I know how to do)
The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
(more yada yada about installing more BRM packages I know how to do)
Deploying and configuring the BRM JCA Resource Adapter ->
Overview of the BRM JCA Resource Adapter configuration procedure
The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
Deploying the BRM JCA Resource Adapter on an Oracle application server
The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
Application
JAR files
J2EE application server
classes12.jar, connector15.jar, and jta.jar
Oracle BPEL process
bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
BRM J2EE Resource Adapter
pcm.jar and pcmext.jar
Apache
xercesImpl.jar
If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Restart the application server or the J2EE instance.
After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Remove the following oracle.bpel.common entry (shown in bold below):
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
<oc4j-connector-factories...>
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
<oc4j-connector-factories>
Save and close the file.
Restart the application server or the J2EE instance.
For more information about deploying the adapter, see your application server’s documentation.
Connecting the adapter to BRM in Oracle AS
You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
Create as many connection factories as your system needs. For each connection factory, specify the following:
The JNDI location for the connection factory.
The connection pool to use.
How to connect to BRM by using these entries:
Entry
Description
ConnectionString
Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
DBNumber
Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
InputValidation
Specifies whether to validate the input XMLRecord:
True — The adapter validates the input XMLRecord against the opcode schema.
False — The adapter does not validate the input XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
OutputValidation
Specifies whether to validate the output XMLRecord:
True — The adapter validates the output XMLRecord against the opcode schema.
False — The adapter does not validate the output XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
LoginType
Specifies the authentication method:
1 — The adapter logs in to BRM by using the specified login name and password.
0 — The adapter logs in to BRM by using the specified service type and POID ID.
The default is 1.
UserName
Specifies the login name the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
Password
Specify the password the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
PoidID
Specifies the POID ID. This entry should be set to 1.
ServiceType
Specifies the service the adapter uses to log in to the BRM software.
The default is /service/pcm_client.
You have successfully configured the adapter to connect to BRM. -
Excited for expanded fluid grid layout features it had, I got Dreamweaver Creative Cloud SPECIFICALLY for that feature.
Sign up, download, install went smoothly. Open Dreamweaver CC, create new fluid grid layout, hit OK, name and desigante location of .css file and get the following error.
"An internal error occurred while resizing a view. (Cview::ResizeFrameBy)" OK
I click OK and nothing happens. App freezes. No css, no files. No nothing.
Have tried restarting, re-installing, different names and destinations for .css file. I'm running Mac 10.8.2
Literally, this is the first thing I've done w/ an ACC app and I am displeased and frustrated. Getting customer service either via forum or offshore phone call less than ideal.
(apologies for spelling error in subj. can't edit it)Can you try the steps mentioned on the thread: http://forums.adobe.com/message/5420680
Verified Fix :
For all the Dreamweaver crashes on opening Fluid Grid pages , Closing Documents or opening files
Please make sure the default system fonts are all enabled - especially Verdana
On MAC -
Open Font BOOK from Applications
Activate VERDANA FAmily of Fonts
-Harshit yadav -
Help-Create Support Message In SAP
Hi,
When iam creating a new message from Help-Create Support Message it is throwing the error message as 513. Can anyone help me in the mentioned issue.
Regards,
Mirza Kaleemulla Baig.Hi Mirza,
Please check the following:
- Check that the users used to create the support desk message has the
following authorizations.
SAP_SUPPDESK_CREATE
- Can you please attach the contents for the table BCOS_CUST in both the
solution manager system and one of your satellite systems.
This table must show this entry at least:
OSS_MSG W NONE CUST620 1.0
- Check also note 1011376
Hope this helps,
Dolores -
Sold-To Party and Reported missing when doing Help - Create Support Message
Sorry, I know this has been asked multiple times, but I'm missing something in the responses. The responses I am finding either don't seem to apply to my situation, or aren't detailed enough to explain what I'm supposed to be doing.
Solution Manager 7.0 EhP1 SAPKITL435.
If we try to do a "Help - Create Support Message" from within our production Solution Manager system, the "Reported by" field is correct, but the Sold-To Party is blank.
If we try to do a "Help - Create Support Message" from within our non-production Solution Manager system, both the "Reported by" and Sold-To Party fields are blank.
If we try to do a Help - Create Support Message" from another SAP system whose RFC is pointing to our non-production Solution Manager system, both the "Reported by" and Sold-To Party fields are blank.
I've looked at IB52, as well as the SPRO activities under "Partner Determination Procedure." I think a big part of my problem is that they just don'e make sense to me yet, because I can't figure out what I should be changing.
For example, IB52 looks to me like it only applies if you want to assign something to the same person all the time. Am I missing something there, or is that an answer to a different question?
I also can't figure out if I need to create something new in "Define Access Sequences," or modify something existing, and, if I modify, to what?
Does anyone know where I could find specific instructions for setting this up?Hi Brenda,
Regargind this issue, please check if Sold-To party is maintained for
your system with IB52 in your solman system as the steps below:
SOLUTION MANAGER system
->IB52
->select the system on left hand side
->click on 'goto' on top menu
->Select 'partner'
->Now maintain Sold-To party
Also check below note:
1165357 Sold-to-Party is not assigned to Service Desk messa
As you said ou already assigned then i would request you to please check if you have assigned at the system level or not. Somtimes people define at top of the tree and also at system level. Please assign at system level and delete all other. Most of the times this is the issue Sold-to-party doesnt fill automatically.
For reported by field:
Please check the note: 824640: Customizing missing for Service Desk in Solution
read this note carefull and this will help you fixing the reported by issue.
Please, make sure you have applied the following corrections:
1439191 Incident Create: Message Reporter or Processor is not saved
1486132 Incident Create: Enhance search help of Reporter field
1497700 Work center: Message details not updated after refresh
After this if you still having issue you need to provide more details but i think this will fix the issue.
Thanks
Regards
Vikram -
In Need of Help Creating an Action
Hello,
I need to create several thousand QR codes and I am trying to work out how to automate it so that I don't have to make them one at a time.
My idea was to download the EVEnX QR Code plugin for Photoshop and then make an action, or series of actions, to make the codes en mass. The information I need in each QR Code is a URL, with each code having a unique one that links to the products serial number.
So, I created a file roughly the size of the QR codes I needed and used vairables to insert the URL on text layer. I was hoping to be able to create an action that would copy that text, open the plugin (which works like a filter), paste the text, create the code and save/close the image.
However, I can't seem to get it to work. I don't know how to make an action to have it highlight the text layer or an action to paste it into the plugin.
Also, the plugin allows you to make a variable of certain information it pulls from the file but the closest I can get to what I need is file name, however I can't make the files named for the URL because of the slashes. They allows you to use file name, file path and the information like size and date.
Sorry for the long post but I HAVE to get this figured out as this project is for work and I am on a time limit. I don't have to use an action, any other way would be fine! I don't have much experience with scripts but if you can walk me through one that would work then I would be happy to try! PLEASE HELP!!!
Thanks!
In Need of Help Creating an ActionHave you checked out Image > Variables and the Help chapter »Creating data-driven graphics« yet?
Maybe you are looking for
-
Urgent : Workflow Query...
Hi, I have created one workflow by using the BOR BUS2021. here the Request id is Key field . i have created the 5 methods for this object with the customer name space(Y). when i am binding the from workflow to step.the request id is not appearing in
-
Hi, I would like to know how to set up Weblogic (8.1 SP2) clustering. I have two servers, I want to make one as the admin server and the other as the managed server. I would like to know the entries that I make for the clustered server setup while I
-
I had an old Motorola phone paired with my 2010 Subaru. I now have an iphone 4 and hope to get another iphone when the new ones come out later this year.I am unable to pair my phone with my car. I had no trouble doing so with the Motorola. I also
-
Deskjet 3055A shows "problem with tricolour cartridge" when I try to print.
I am relatively new to the world of wireless printing. The printer is not quite a year old and I've never had problems printing from my iPad before. I have removed and replaced the cartridge but still the same message!
-
What does n&w mean on my bill?
Most of my calls are Mobile to Mobile but is see that most are coded N&W. Also what is "planallow"? I do get some calls that say M2Mallow and that makes sense. What do these mean?