Help creating LogIn from Flash tutorial

I need to create a LogIn, that every user will have the SAME
password, and SAME user ID.
I have been working with the Flash LogIn Component. Now, I'm
wondering if this will work.
Suggestions? Recommendations?? (I also can't figure out the
basic: adding in the name/password...)
Thanks in ADVANCE.
Krys
[email protected]

Quicktime has never been able to read flash 6, 7 or 8 files. If you used:
Menu--File-->Export Movie--Quicktime Video. Flash will export the Flash to version 5. This will work. Make no difference what publish settings or Flash version you have...
Now if you use: Menu--File-->Export Movie--Quicktime. Flash will export your video to what ever you have in your publish settings. If you have your publish settings set the version 5, this will work. If you have your publish settings to 6, this won't work.
I You bet your using export to Quicktime instead of Quicktime video. And if you did use export to to Quicktime your publish settings are set to version 6...
There are 2 exports to Quicktime in Flash:
Quicktime...
Quicktime Video........

Similar Messages

Failed to create LOGIN from a domain account on SQL Server 2012

Hello,
My environment is like,
A Domian Controller (with the domain name: CONTOSO) hosted by a Windows Server 2008 R2. --- Server 1
A SQL Server 2012 x64 runs on another Windows Server 2008 R2 (this Server has been added into the CONTOSO domain). --- Server 2
I am trying to create a SQL login on Server 2 with the statement shown below:
CREATE LOGIN "CONTOSO\domain_group_b" FROM WINDOWS;
while, an error occurred,
Msg 15401, Level 16, State 1, Line 1
Windows NT user or group 'CONTOSO\domain_group_b' not found. Check the name again.
I've made sure that the domain group account "domain_group_b" has been created on Server 1.
Is anything else needed to be done?

Pretty pretty sorry for my bad explanation in English.
Yes, the Server 2 (the actual name of this server is "SQL-A", the Server 1's name is "DC") has been a member of CONTOSO.
I typo the domain name CONTOSO as CONTSO, but I keep using CONTSO everywhere.
These two servers are hosted by Hyper-V.
I could login on server2 by the domain user "domain_user_b".
It seems that neither the domain group, "domain_group_b" nor the domain user, "domain_user_b" cannot be associated when creating a SQL login.
SQL-A captures:

Help creating .csv from forms 6i

Hello all, I we are running forms 6i webforms. The webforms are located on Unix. What is the best way to take the data from the webforms and create a .csv file? The ultimate goal is to have a file the user can open in excel. It would be great if Pseudo or actual code could be provided. How can would I go about creating a file with the file||datetime and have the user open the file. I'm thinking about calling reports and then using web.show_document, but how could I rename the Oracle report file? Any help would be greatly appreciated. Thanks.

Hello,
You can take customize the code and put in the required trigger.
Cheers,
Suresh
DECLARE
AppID PLS_INTEGER;
ConvID PLS_INTEGER;
Buffer VARCHAR2(240);
ROWCOL VARCHAR2(20);
CNT NUMBER;
BEGIN
AppID := DDE.App_Begin('C:\Program Files\Microsoft Office\OFFICE11\excel.exe C:\test1.xls', DDE.App_Mode_Minimized);
ConvID := DDE.Initiate('EXCEL','C:\test1.xls');
GO_BLOCK('BLOCK2');
FIRST_RECORD;
FOR I IN 1 .. 500 LOOP
CNT := 0;
FOR J IN 1 ..6 LOOP
BUFFER := '';
CNT := CNT + 1;
DDE.Request (ConvID, 'R'||I||'C'||J, Buffer, DDE.Cf_Text, 240);
BUFFER := RTRIM(LTRIM(BUFFER));
BUFFER := SUBSTR(BUFFER,0,LENGTH(BUFFER)-2);
IF BUFFER IS NULL THEN
EXIT;
END IF;
COPY(BUFFER,'BLOCK2.OUTPUT'||TO_CHAR(CNT));
END LOOP;
IF BUFFER IS NULL THEN
EXIT;
END IF;
CREATE_RECORD;
END LOOP;
DDE.Terminate(ConvID);
DDE.App_End(AppID);
FIRST_RECORD;
END;

Help needed! From Flash Professional to Edge Animate poll.

If you have used Adobe Flash Professional and Adobe Edge Animate, please answer this 12-question poll. I'm studying in a university at the moment, and to complete the assignment that I have to do, I created a simple poll to find out, how users of Flash Professional can adapt to animating in Edge Animate. I'd appreciate it alot, if you answered this poll!
https://docs.google.com/spreadsheet/viewform?formkey=dEZCdHp3SGVSOEdseEM2WG5MMk1xdUE6MQ
Thank you!

hi heldeJ,
i just filled out your poll. I'm a flash developer who is moving to edge and would be interested in seeing the results of your poll. Good luck with it!
best regards,
-sharon

Help with submenu (from projectvii tutorial)

hi there...
i made a site with two submenus, following a project vii
tutorial.
as my default browser is firefox everything seemed ok, but
now i just
watched it in IE 6, and the submenus mouseovers are a mess...
i can�t
understand why!
the site is here:
http://impact1.coresaocubo.com
i'm in a pc. as i said in firefox everything works fine, but
in IE 6 the
mouseovers of both submenus are a mess :(
can any1 give me a light in this subject?...
thank you very much,
ana

In IE6 on Windows XP, your submenu's look *exactly* the same
as they do in
Firefox. I'm not sure what you're seeing exactly...
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Web Dev Articles, Photography, and more:
http://sourtea.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"ana" <[email protected]> wrote in message
news:ee8rd8$2l6$[email protected]..
> hi there...
>
> i made a site with two submenus, following a project vii
tutorial.
> as my default browser is firefox everything seemed ok,
but now i just
> watched it in IE 6, and the submenus mouseovers are a
mess... i can�t
> understand why!
>
> the site is here:
>
http://impact1.coresaocubo.com
> i'm in a pc. as i said in firefox everything works fine,
but in IE 6 the
> mouseovers of both submenus are a mess :(
>
> can any1 give me a light in this subject?...
>
> thank you very much,
> ana
>

Printing from Flash

(I just changed my first posting in this thread to give it a
new headline. The original one was "SWF embedded in a PDF - can
they communicate?", but it turned into a printing thread - with a
solution.)
I'm trying to build a printable form with multimedia help
(this is a free project, I don't get paid). Since I can't create
PDF from Flash I instead try to get the Flash into the PDF. It
would be very helpful (although probably not essential for this
particular project) if the embedded Flash could communicate with
the PDF on the outside, for example using ExternalINterface. That
interface is for communication with Javascript in a browser - and
since Acrobat forms support Javascript scripting I was wondering if
that would work? The docs only mention browsers.
Another question to achieve the same thing: I thought about
letting the user fill out the form in Flash completely. Then I
export the collected data into XML, and then open a PDF form which
reads the XML. However, I don't think there's a non-manual (for the
user) way of doing this, is there? Ahhhhhhrg, stupid project, why
did I volunteer...

Well flash can do the printout as well...so you don't need
the PDF exclusively for that. I think the difficulty is the local
copy working without complications/complexity. {UNLESS: you're
prepared to use a projector .exe}
When you embed a swf inside a PDF how is it embedded... ? Is
the embedded object able to be referenced, for example, using the
js inside a PDF.
Its been a long time since I used acrobat. ExternalInterface
does allow communication between the flash content and its
container - in a generic sense - like kglad explained earlier. So
ExternalInterface works in visual basic for example. It doesn't
appear to work as simply as its set up to work in the browser (see
http://vbfeeds.com/post.aspx?id=672).
Whether it works or how it works inside a pdf would probably depend
on the way the embedding is done, but I can't see anything online
about how to do it - and I am unable to try it myself.

Create link to help topic from Flash file

We have started using Flash to develop our online learning
modules. So far they have been stand alone modules accessed from an
internal web site, published as .EXEs. Our latest Flash module is
related to a system for which we have an HTML help file. We'd like
to embed the Flash module in the help file b/c we want a link in
the Flash module to open a specific help topic.
I can get individual .SWFs into the help file but these Flash
modules are more complex, using many .SWFs for navigation, the TOC,
the frame, and for each interaction. In other words, the main .SWF
(or .EXE) calls many other .SWFs as the user navigates through the
module.
If I can't get the Flash module into the help file, and I can
only link to it as an external file, can a link from within a .SWF
in the Flash module open a specific help topic in the .CHM?
Any other ideas?
Thanks for your help,
SueM2

This question was answered by kglad, on Saturday, August 11,
2007 10:13 AM
Answer
no it doesn't. getURL() causes no security issues unless you
try to open the html locally and (try to) access something on the
internet.
unless your "flash site" is your local computer there is no
security issue. if your local computer is an internet server, you
just need to set the security settings for your local file and give
it permission to access the internet zone.

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

"no access to the digital certificate" - Trying to export my first iOS app from Flash - Help please

Hello
I'm trying to export my first iOS app from flash to my desktop / on the device (Flash Pro CC, Iphone5)
I followed the instructions on the adobe website to build an air app for iOS but on the last step it
doesn't export the app.
What I've done so far:
- Apple developer account
- creating the certificate + convert it to .p12
- app ID / Name etc.
- creating the provisioning profile from apple
- iOS Air app in flash (Only Text "Hello world" with a tween)
Now i have to load the certificates into Flash & enter a password (is it the password that
i entered in the certificate or from my developer account/ Apple ID password? Both didn't work at the end)
When i klick on publish in the last step than it loads a while but then i get the Error:
"no access to the digital certificate"
What is wrong? Can you help me please.

Also, I should say, when I go into my phone on the computer and try to install an app, I get this message:
Unable to start operation. Installer is already in use.
Any ideas

Need help in finding open source for creating Login component

hi
Pls any one help me out in finding some good open source for creating login component for my application
i have heard about josso but i am not able to find how to use it if anyone can help in setting up josso i wil be very thankful to that person and also if anyone can help me finding some other open source i will be very grateful ,,
Pls help its very urgent and i am running short of time

DECODE(l.attribute_category, 'Coverage Template Header', l.attribute3) Penalty_Bonus,
DECODE(l.attribute_category, 'Coverage Break', l.attribute1) Mon_Break_Start,
DECODE(l.attribute_category, 'Transaction Type', l.attribute1) Split_Covering,Uh oh, the dreaded entity attibute value, or generic, data model.
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:10678084117056
I am afraid slow performance is a built in feature of this database design, not much you can do in queries.
You could possibly create the views as materialized views and query those instead.
Quote from the linked article
But, how does it perform? Miserably, terribly, horribly. A simple "select
first_name, last_name from person" query is transformed into a 3-table join with
aggregates and all. Further, if the attributes are "NULLABLE" - that is, there
might not be a row in OBJECT_ATTRIBUTES for some attributes, you may have to
outer join instead of just joining which in some cases can remove more optimal
query plans from consideration.
Writing queries might look pretty straightforward, but it's impossible to do in
a performant fashion.

Creating userid and password login from web page

I want to create a page where i will have userid and password.When i log in it should check the username and password in the table.
When i make a new entry also it should be added in the table
Please help me how to proceed with this .
Please help me in creating the html page also

mod_plsql manual at:
http://download-east.oracle.com/docs/cd/B25221_03/web.1013/b25599/toc.htm
Configuration for mod_plsql:
$ORACLE_HOME/Apache/mod_plsql/conf/dads.conf
First thing to do is to ensure that mod_plsql works and can run your stored procs. Edit the dads.conf file (use dads.readme for instructions) and configure a DaD (Database access Descriptor) for you database.
Restart Apache to effect the config change. I simply (and incorrectly) use $ORACLE_HOME/Apache/Apache/bin/apachectl - and it will tell you why it is not recommended and the correct command to run.
The URL for will be something like:
http://yourserver/dad/[schema.][package.]procedure[&parameters]
The stuff in square brackets are optional.
Create the following sample PL/SQL proc to call from the web browser:
create or replace procedure Hello( cName varchar2 DEFAULT NULL ) is
begin
htp.prn( 'Hello World from '|| NVL(cName,'Nobody') );
end;Make sure the Oracle user you configured the DaD with has exexcute rights on this procedure. E.g. if the DaD uses Oracle user WEB_USER to connect to the database and the procedure is created as SCOTT, then SCOTT must grant execute rights on the proc to WEB_USER.
The web browser URL for calling this stored proc will look as follows:
Without passing any parameters:
http://yourserver/dad/scott.hello
With passing the cName parameter as defined in the stored proc:
http://yourserver/dad/scott.hello?cname=John
As for the rest - you likely will need to use cookie authentication to "login" from a web page. Then you also need to determine just how you are going to use these session cookies on the database server side for security. How you're going to manage these cookies. Persist them in the database. Which also means managing session states for stateless clients via such a session cookie. Etc.
This is not trivial to design, code and implement.
Why not use Oracle Application Express instead?

Linking a Flash Tutorial File to a online help chm File

I am trying to create links from a page in my online help chm
file to an animated tutorial of our product. I want to create links
from specific topics in the chm to specific topics in the tutorial.
For example a section of the help deals with a specific topic. The
tutorial covers the topic but it is covered 10 minutes into the
tutorial. How do I create a link from the help topic directly to
the specific section of the tutorial? Is it possible? Can eanyone
provide me with some code examples to use?

use getURL()

How to get list of logged-in users from Flash Media Server in a Flash programm? (Or login/logout notifications)

Hi there,
I'm Very sorry for asking this. I guess it's a very basic problem, but I'm very new to Flash and Flash media Server and I need a very fast answer...
Currently I'm working on a Director project using a flash program which connects to Flash Media Server (I guess version 3, it's quite old). Unfortunately they forgot to make a flash method to send the actual userlist (or a notification when someone logged in or out) to Director. AND, unfortunately, they lost the source code of that flash programm, so I cannot look into it or alter it *sigh*.
Now I want to do a new flash programm which covers the old one, letting all known methods "pass trough" and building an additional method to gain the user list (or login/out notification).
How do I get the login information from Flash Media Server? (Would be good if you could provide an idea already for flash code... as I said I'm a tard at flash till now)
Thank you so much. And I hope you understand my situation asking here...
Jana

hparmar : yes, that's what I feared... I hoped it would be possible to tell the server from which application I do need the login information. What a mess.
Dimo Hristov: thanks for your offer! I already tried decompiling the flash program with the shareware version of Trillix Decompiler. It only decompiled the UI (in a terrible way) but no source code at all. It was the shareware version where I can decompile 2 or 3 programms to test the software. Are you sure the non-free version of Trilix Flash Decompiler will do..?

Can't create PDFs from Word due to Cambria font. Help.

I'm using win 7 32 bit office 2010 acrobat pro 9. I can't create pdfs from word because of problems with cambria. I've ttried all the fixes I can find but none worked. Any more ideas?
[thread title updated by moderator]

How are you trying to create the PDF? With AA9 you have to print to the Adobe PDF printer or use the MS plugin.
When you say you cannot create PDFs because of Cambria, what error messages are you getting and copy them here? At this point we really do not know what you are having problems with or how you are trying to create PDFs.
In the future, please provide a topic to help folks that are stepping through all of the posts. A blank topic almost led me to simply skip your post.

HOW TO - Create new from clipboard and process multiple files - please help

Need help - have new version of photoshop on trial only ATM...
Want to know - HOW TO:
1. Create new from clipbaord
2. Process multiple files
Please help.

For clipboard copy, I start with File > New and the size will be set to what's in the clipboard. Then once the new file is opened, Edit > Paste will place the clipboard contents as a layer in the new document.
You must remember to use the command Layer > Flatten Image of you want to save as jpeg or any other file format that doesn't support layers.
For processing multiple files,
File > Automate > Batch or
File > Scripts > Image Processor...
Check the User guide or google information for those commands if you have specific needs.
Gene

Help creating LogIn from Flash tutorial

Similar Messages

Maybe you are looking for