Help Creating OM Infotype
Hi Experts,
I've some doubts while creating OM infotype. I've been reading this manual http://www.sappro.com/downloads/jan07/OMinfotypes.pdf
but, when I try to create the HRIXXX structure and save it I received an error from the package "Customer Object TABL HIRXXX cannot be assigned to package XXXX"
Can anybody help me? I'm not quite sure if this is problem for the package or for the table's naming convention. Please, can anybody tell me if the documents is still correct?
Thanks in advance,
Regards,
Rebeca
Hi Rebeca,
Is the name of the table HIRXXX or HRIXXXX - Should be the later one.
Please also refer to my article on PD Infotype creation :
http://www.sdn.sap.com/irj/scn/articles-erp-all?startindex=81
Regards,
Dilek
Similar Messages
-
HR ABAP-Need help in creating the Infotype
Hi All of you,
I have to craete an infotype with 16 fields.
But as per my requirement i have to design the screen such as it has to be four tabs ,
Under each tab i have to dispaly four fields.
Urgent please.....
Thanks in Advance,
Mani.Create you infotype using standard method.
Then all these screen changes needs to be done on the generated Module Pool.
This chanes will be like any other general module pool proram..
Regards,
Amit -
Help required on creating OM infotype
Hi,
Please explain me a create a OM infotype.Hi Williams,
Please take a look at my recently published article on how-to-create OM infotypes.
In this article I have explained the process step-by-step.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c03ec8d4-71c9-2d10-e1b9-b3142180f094
Regards,
Dilek -
Error while creating pd infotype
Hi friends,
I am creating PD infotype which is having same structure as 1002.here i copied module pool program of 1002 to my infotype and there i made changes to fields.when i am running it in pp02 transaction it is giving runtime error create_data_unknown_type.this exception is coming from module 'initialize_dyn_tab' which is in the PAI of screen no 2000.will any one pls help on this issue.
Thanks,
kumar.Hi Chandra,
Actually, you don't need to. System should create it.
If you have problems though, you can refer to the article below which expains a more detailed solution of creating a PD infotype:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c03ec8d4-71c9-2d10-e1b9-b3142180f094
Regards,
Dilek -
Create PD Infotype link to Object USER
Dear Experts,
I have created a custom PD Infotype P9032, under Object "User'. But when i go to Expert Mode to create the infotype record, it screen brings me to "Su01" screen ie. create SAP user instead.
If i change the Object to "Organizational Unit" and create the infotype record, it shows me the correct custom infotype screen.
How do i link my custom PD infotype to Object User? ... i have done the necessary updating of table T777I.
Thanks so much,
ZulHi Dusan,
perhaps the following steps will help you.
1. calls se11
2. mark radiobutton in front of Data type
3. fill data type with HRI9003
4. goto menu [Utilities] and select [Environment Analysis]
This will display all objects i hope also the 3 missed. From there
you could mark it and delete it.
Hope this helps.
Regards
Bernd -
Hi SAP Guru,
Greetings for the day,
I had hired a guy with the infotype of 0207,0208,0209,0210 after hiring i try to transfer him using TRANSFER ACTION to another location say from New York to California, which is entirely a different state, where unable to create the 0208,0209,0210 in that i can able to create 0207 infotype alone, when i tried to create after 0207 creation, it is not accepting the information, Here i am looking for some one help, where some one can throw a torch for this issue.
I had checked with dynamic action, which shows correctly.
Pls help me in this regards, this is very urgent.
Thanks in advance for your reply.
Regards,
Babu.Generally, an Infotype 208 is not required. Therefore, you would
not get an error in RPCACLU0 if an employee does not have one assigned
Without an IT0208 record, the system uses the tax authority
specified on IT0207. Additionally, the same applies to IT0209; one is
not required and the system will use that of either IT0207 or IT0208.
Best regards,
Márcio Leoni -
Search help on custom infotype
Hi Experts,
I create custom infotype with field PLANS and others.
I have problem on search help (F4) on field PLANS,
I want to get structural list of position ( like attach file example2.png), not like this in attached file example1.png.
Could you please help me resolve this problem.
Thank you, MijaHi Mija,
The following FM will return you the hierarchical list of any HR Object type that you specify.
CALL FUNCTION 'RH_OBJID_REQUEST_46A'
EXPORTING
plvar = '01'
otype = 'S'
IMPORTING
sel_object = ls_objec
EXCEPTIONS
cancelled = 1
wrong_condition = 2
nothing_found = 3
illegal_mode = 4
internal_error = 5
OTHERS = 6.
I use this for 'F4 Help' in the selection screens of my report programs. But, to have it at the table level, you need to create a Search help and attach it to the particular field of the Custom Infotype table. -
How we create custom infotype and how to configure with its subtypes.
hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumarHi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screen Select `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appears here you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha. -
I am trying to create a new custom OM Infotype, the T77* entries are not creating automatically as they should. Also screens 2000 and 3000 are not creating, could this be stopping the table entries from creating? Any help would be appreciated.
Hi,
Are you using PPCI transactio to create an Infotype
Prerequisites
You must create a structure HRI9nnn in the ABAP Dictionary and define infotype-specific fields in
this structure. The structure is created in a development class without a prefix.
No further Repository objects - such as screens or module pools that you may have created
manually - may exist for the infotype apart from those in the structure PT9nnn (or HRI9nnn).
If such Repository objects exist, delete them by choosing Check environment.
Procedure
To use the infotype copier, you must be able to program in ABAP, be familiar with
the ABAP Dictionary, the ABAP Screen Painter and the ABAP Menu Painter.
1. Enter the transaction code PPCI.
2. Enter a four digit infotype number (9nnn) and an infotype name.
Select Lang-dep. infotype if you want to create a language-dependent infotype.
Select Country-specific infotype if you want to create a country specific infotype, in
other words, an infotype that is displayed when you choose the relevant countryspecific
settings.
3. Choose Table infotype.
4. Choose Infotype Create.
The infotype copier generates all of the Repository objects that are required for the
infotype.
5. Choose Check environment to maintain the required entry in table T777I (Infotypes per
object type).
Result
All the Repository objects required for the infotype have been created. The relevant infotype
specific table entries in tables T777T (Infotype texts) and T778T (Infotypes) have been
maintained by the infotype copier. The user has maintained the relevant entry in T777I (Infotypes
per object type).
Regards
Krishna
Edited by: Krishna Gowrneni on Apr 30, 2009 8:49 PM -
Create OM infotype : very hard...
Hi,
i would like to create a <b>OM infotype</b> not PA.
i recovered some documents on this site, but when i follow the procedure, it don't work.
Can you explain to me the full procedure please ? step-by-step.
Thanks so much.
I'm on SAP ECC 6.0.hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Go thru following thread
INFOTYPE for P.A. and O.M.
Step by step guide on creating OM Infotype:
http://www.sappro.com/downloads/jan07/OMinfotypes.pdf
Have a look at the below links
http://www.sapdevelopment.co.uk/hr/hr_infotypes2.htm
Re: Infotype
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP_PD.pdf
Reward points if found helpful ..
Cheers,
Chandra Sekhar. -
How to add search help to custom infotype listbox??
Hi All,
How to add search help to custom infotype listbox??
Thanks in advanceHi Vinay,
We have search help and list box as 2 different options.
At a time we can make a field a list box or a search help.List box is restricted and we can pick values from the defined list whereas in search help we can allow more entries and then validate the value entered later.
Implementing a listbox or search help in infotype is same as that of implementing it in a modulepool .
for search help..we can create a custom search help or check for existing search help in se11
then in the screen on infotype field..assign the search help direcly at the screen painter level..
double click on the field in screen painter -> change mode and then in the space for "search help" enter the search helps name
for list box..in the screen painter ,make sure the field is selected as list box..then in PAI of screen we do a
(Process on value-request..field fieldname module module name)..check syntax and other details...
Using function module vrm_set_value fill the field and populate it as required
Pls check and revert
Regards
Byju -
Hi experts can any one guide me how to create OM Infotype?
I know that we need to create a structure using SE11. then we need to go with the creation of Infotype.Dear Vamsi
Check this out
How to create a HR infotype?
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the Employee Infotype radio button.
4) Select the PS Structure Infotype.
5) Click on Create A separate table maintenance window appears
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on All push button. It takes a few moments.
10) Click on Technical Characteristics. Infotype list screen appears
11) Click on Change(pencil) button
12) Select your Infotype and click on Detail (magnifying glass) button
13) Give T591A as subtype table
14) Give T591S as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on Infotype Characteristics Infotype list screen appears
18) Click on Change (pencil) button
19) Click on New Entries
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypes infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement
25) In the PM01 initial screen Select Screen radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select Layout Editor and click Change.
27) Screen default layout appears here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Dont forget to Activate at every level)
Another way of creating the infotype with screen shots:
Creating a New Infotype
Step 1
Execute transaction PM01 (If you get a message saying the infotype can not be enhanced,
try transaction PPCI).
Step 2
Select create IT tab and enter new infotype number into selection box.
Step 3
Press the create ALL button (left of infotype no.). You will get a dialog box asking to confirm,
press the create button.
Step 4
You will now be presented with the standard structure creation screen (SE11) where you need to
enter the fields of the new infotype. I have entered some examples but you can put anything in
here.
Step 5
Once you have entered the fields press save and then activate, before pressing the back button.
You will now be presented with the following screen, where you will need to make a new entry
or your created infotype (i.e. 9010).
Step 6
The next step is to fill in the infotype attributes, these will initially be blank and you will need to
fill them in similar to the following, depending on your requirements. Then press save.
Step 7
Your infotype is now created and can be accessed and populated in the usual way using
i.e. using transactions such as PA20 and PA30.
Step 8
If you look at the structure of your new infotype in transaction SE11 it will look similar to the
following:
Award points if helpful
regards
jayeeta -
Create Custom Infotype using PPCI
Hi,
My requirement is to create an HRinfotype . I am trying to create a new custom infotype (9500) via transaction PPCI, categeory when i select the option user should use Transaction PO10 and choosing the org unit, user should be able to choose my custom Infotype 9004 Site type and Industry and select Create/Edit/Delete.
For this we follow the below given steps :-
Step1: Create structures as mentioned in the HRI9004
Step2: Using transaction PPCI create field infotype.
Step3: In table T777I assign the new infotype to the standard object type Org unit and define the time constraint.
Can any body help me or send me any document to start from step 2 . i.e Using transaction 'PPCI' .Hi,
Look into the path below
http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/PAXX/PYINT_INFOTYP_PD.pdf
Regards
Pavan -
Initially I tried creating PD infotype by creating the structure HRI9005 and then going to PPCI to create custom infotype. Due to some reason , I had to delete all objects from the requests . When I tried to create it the next time , it is throwing me error messages as Structure p9005 does not exist, table hrp9005 does not exist . Is it something to do with my previous deletions . Any suggesions to overcome this problem would be highly appreciated
use this link:
http://help.sap.com/saphelp_erp2005/helpdata/de/b7/0feb34bf03c210e10000009b38f83b/frameset.htm -
I can't create an Infotype using PPCI
Hello all!!
Please, I need help!!! I can't create an infotype using PPCI. After a lot of changes, I've created some objects by hand, but, when I execute transaction PPCI I still have the same error, Impossible to create.
Following you can see the tree... please, can anybody help me!!!
Infotype 9504
Dictionary
Structure HRI9504 exists
Structure P9504 exists
Table HRP9504 exists
HRP9504 created in the database
Database index XXXX not created
Module Pool
Module pool MP950400 exists
Include MP950420 exists
Include MP9504BI exists
Screens
Screen 1000 exists
Screen 2000 exists
Screen 3000 exists
User interface
User interface for MP950400 exists
Table entries
T778T: no table entries exist
T777T: no table entries exist
T777D: no table entries exist
T77ID: no table entries exist
T777I: no table entries exist
T777Z: no table entries exist
T77OA: no table entries exist
T777M: no table entries exist
T778U: no table entries exist
T777U: no table entries exist
T77NI: no table entries exist
SOBJ entries
OBJECT PDST: no table entries exist
OBJECT PDWS: no table entries exist
TADIR entries
R3TR TABL HRI9504 exists
R3TR TABL P9504 exists
R3TR TABL HRP9504 exists
R3TR PROG MP950400 exists
R3TR PROG MP950420 exists
R3TR PROG MP9504BI exists
R3TR DIAL RH_INFOTYP_9504 does not exist
Please, how can I create the index and the Dialog Module? I can't created by hand using SE35!!
Need help!! Thanks!!!!Hi Rebeca,
Please maintain tables manually via SM30.
You can check the following article :
http://www.sdn.sap.com/irj/scn/articles-erp-all?startindex=81
And please close other threads on the same subject.
Regards,
Dilek
Maybe you are looking for
-
hi, i purchased my daughter the ipod touch5 she was able to charge it but little by little it stopped charging, we thought it was the charger. so i purchased a new apple charger it would charge the first few days but now it stopped, i tried resetting
-
Copy down Ship-to Partner from main item to sub-items on Sales Order
This is my first post on the forums here. I'd appreciate any help you can give on my issue below. I have a requirement to copy down the ship-to partner from the main item to sub-items during sales order create or change. Currently I have code in in
-
Is it possible to export a file from Organizer with the list of all the images in an album?
Is it possible to export a file from Organizer with a list of all the images in a certain album? In filling one of my albums I did not save my edited images to the same file... they are spread out a bit.... Now I want them to make a book with them (o
-
Hi , I have an issue as below : getting error while doing GR for Non stock material for PM purpose 1. Posting only possible in periods 2011/04 and 2011/03 in company code 0001 Message no. M7053 Diagnosis The posting date entered is not within one of
-
Having problems downloading OX updates.
Hi I have a OS X version 10.8.5 mac. I have been trying to download updates for the mac ,but have been unable to because it keeps saying error after a few minutes of downloading. Been having this problem since May. HELP!