Help!  Cross Platform Projector issue

Hi all,
I am sure this has been a hot topic for years and I did do
various searches and was surprised not to find anything on it
quickly. Sorry if this has been discussed a lot, as I imagine it
has. We are able to make our functioning mac and win projector with
our win version of flash 8, but everytime I burn the cd on win, the
projector file does not know what to do with itself when trying to
launch back on mac.
Questions:
1. Does cross platform burning have to be performed on a Mac?
2. If so, does one need toast to do the cross platform
burning to make the mac and win projectors groovy on their
respective platforms? We have a brand new MacBook Pro - it seems
like it should have these capabilities built in at this point, but
not sure.
Any pointers here or to a technote would be much appreciated.
Thanks!
We

Read this
http://board.flashkit.com/board/showthread.php?s=ffa1834a93ea5d8f5c4c8f9e97f34191&threadid =500326
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

Similar Messages

  • Old Macromedia - Adobe cross platform font issues

    This message is more directed to Adobe.
    I am aware that currently OpenType fonts are cross platform compatible but only with Illustrator, Photoshop and InDesign.
    However, my primary workspace is Fireworks-Flash. There are serious cross platform issues with fonts - I have looked at truetype, postscript and opentype and they all have issues translating onto PC - many of the styles are not available.
    In our studio I design on Mac but our Flash developers are on PC - our final renders and review renders always need to happen on Mac as a result of this cross platform issue. This is a little inefficient.
    When is Adobe planning on resolving this issue?

    "I am aware that currently OpenType fonts are cross platform
    compatible but only with Illustrator, Photoshop and InDesign."
    No, they are fully cross-platform compatible. The Adobe products you
    mention, along with a very few others, are the only applications
    capable of taking full advantage of the advanced features available in
    some opentype fonts. And even the three products you mention don't all
    necessarily support open-type in the same way.
    "However, my primary workspace is Fireworks-Flash. There are serious
    cross platform issues with fonts - I have looked at truetype,
    postscript and opentype and they all have issues translating onto PC -
    many of the styles are not available."
    If you are using the same application version on both platforms, you
    should have identical functionality. If you're using an older version
    of Fireworks.
    The only cross-platform style issue with TT or T1 fonts is that
    Windows doesn't recognize any styles other than Regular, Bold, Italic,
    and Bold Italic. Also, there's a font menu difference between MacOS
    and Windows. Mac display all available styles, whereas Windows only
    displays the family name, and you have to select the variants from
    somewhere else (typically "B" "I" "U" buttons). SOME font families
    from some vendors use the style function to define such variants as
    Small Caps, Light, etc. MS products get ... confused.
    "In our studio I design on Mac but our Flash developers are on PC -
    our final renders and review renders always need to happen on Mac as a
    result of this cross platform issue. This is a little inefficient."
    If you're using different applications for design and rendering, and
    their functionality is different, then you have a cross-application
    compatibility issue. You didn't mention what applications or versions
    are involved.
    "When is Adobe planning on resolving this issue?"
    It may be more a Microsoft issue than an Adobe issue. In addition to
    the style limitations, There are no MS products that yet support
    open-type features.
    Although Adobe personnel do sometimes visit here, this is not a
    "talk-to-Adobe' forum. Since your problem is application related, I'd
    suggest taking it to the appropriate application forumsFireworks
    General Discussion looks right.
    And, as Bob said, you might also contact Adobe support directly with
    your concerns.

  • Cross platform networking issue

    Okay, my group consists of about three dozen Macs (most on 10.3.9, but about half a dozen on 10.4.3) and we are hooked up to a Windows-based network which uses Extreme-Z IP to serve up the shared volumes to the Mac users. Recently, the corporate IT folk upgraded the network file servers. Now we can connect to the new servers via the "Connect to Server..." dialog, however, on most of the machines, the new file servers don't appear when browsing the network in a Finder window (on a few machines they do show up). At first I thought this must be a Tiger vs. Panther issue, but I quickly discovered that most of the Panther machines have the same trouble. Anybody got any ideas why this would be an issue on some machines but not others?
    Thanks in advance.
    Dual 2.0GHz G5 Powermac   Mac OS X (10.4.3)  

    Here's an update: What I said in my first post was a little misleading. You can actually see the file servers from all the machines, but not in the way we used to be able to. Previously when browsing the network we could see the Appletalk zone as a folder on the network and all our file servers showed up in that folder. In addition to that, a folder called local would show up, and all our file servers would also appear in that. What I didn't realize is that folder exists on the Tiger machines as well, except it's called My Network. So we can browse to all the file servers that way (which I'm guessing represents Rendezvous?) but they don't show up on any machines in the Appletalk zone folder. My guess now is that this is an issue with the way the servers are configured. It's no longer a crucial issue (since everyone can get to the shares via the Local (or My Network) folder) but I would still like to know what's going on. Anybody got any insights?

  • D11 Cross-Platform Shockwave Issue

    I just did a build of a Shockwave version of a freeware game
    that I created in Director.
    I'm using the DCR and HTML page generated by Director 11, but
    while it loads and works just fine on a Mac, it doesn't load on my
    Windows computer (or on my Mac under Parallels or BootCamp). On
    Windows, it just hangs there with an empty progress bar. Forever.
    You can see it in action here:
    http://gigaplay.com/microbop/sw
    Thing is, I've done a Shockwave build of another freeware
    game of mine and it works fine on my Windows computer. You can see
    it here:
    http://gigaplay.com/letterboxed/sw
    Anyone have any idea what might be wrong?

    quote:
    Originally posted by:
    MartyPlumbo
    Wow, talk about your cryptic usernames! ;-)
    yip, strange name... wonder what my parents thought... :O)
    and yes, worked fine on intel mac, leopard. was just too lazy
    to test on my imac ( still prefer my g5... - getting old?) and sort
    of curious what it looks like with old shockwave player. (on g5)
    camino was loading content, then informing that a new plugin has to
    be installed.
    funny games, btw :O)
    installing the new shockwave plugin means that all the havok
    stuff out there is lost, which i don't want. at least not now.
    like
    http://www.adobe.com/cfusion/showcase/...
    what definitely sucks. poor guys!
    hmm, not the right place i guess - but as it seems that for
    me director is history - are you using unity pro or indie?
    and is indie good enough? i downloaded the trial (by the way
    no problem ADOBE.... can you hear me ADOBE?! no, not listening
    anyway...) and it's quite impressing, but i don't have the time to
    get into it as much as i want to. so what do you think, how long
    does it take to put a project from director to unity with about
    20000 lines of lingo...
    hmm, maybe a silly question, but i definitely have to look
    for an alternative to director. and any information is very much
    appreciated, especially as you are a director and unity user. by
    the way, the unity-community seems to be very friendly and
    helpful.

  • Cross Platform Styling Issues

    I am currently styling a site and am doing browser checks on both PC and Mac. With the mac version, which is what I am styling on, it appears to render content in a href slightly different, where it favors the bottom, and on the PC it favors the top. check out the green buttons here: http://kippdelta.web2.sundaramdesign.com/
    If you check it on both PC and Mac, you should see the difference.
    I'm sorry if this isn't better explained. Please let me know if further information is needed.
    Trevor

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • Cross platform development issue (32-bit and 64-bit)

    We are developing an application which runs as a windows service on a Windows 2008 64-bit server; the service runs under the SYSTEM account. The development environment is Visual Studio 2008 using .NET 2.0, on Windows XP 32-bit.
    The application runs queries against a remote Oracle 11g database. We have installed "ODAC for Oracle Clients version 11.1.06.21" on the development system and Oracle Client 11.1.0.7.0 from "11107_w2k8_x64_production_client" on the Server installing only the default selection from Oracle Windows Interfaces 11.1.0.7.0. The DLL deployed by our application is Oracle.DataAccess.dll version 2.111.6.20. The installed DLL on the Windows 2008 server is in D:\app\Administrator\product\11.1.0\client_1\ODP.NET\bin\2.x and is Oracle.DataAccess.dll version 2.111.7.0. There is only one Oracle Home on the Windows 2008 server.
    Our windows service throws the following exception when run on the server:
    Oracle.DataAccess.Client.OracleException The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize()
    at Oracle.DataAccess.Client.OracleConnection..cctor()
    We also have a desktop based test program which is built in the same environment and with the same libraries. This application connects to the Oracle server and can run queries with no problems.

    Hi,
    A process hang can be caused by many different things.
    1. What type of application are you deploying? Is this hosted (IIS ASP.NET) or client/server (Winform/console application)
    2. Are you able to determine exactly how far the application gets when it appears to hang? Or do you observe this at process startup?
    2A. Do you have any sort of application logging that can be turned on to determine where the application is hanging?
    3. Are there any entries being written to the event viewer log that provide any additional information for that process around that time?
    4. If the process starts up or this is hosted, you may consider taking an ADPLUS hang dump of the application process/worker process when it is considered hung. Inspecting the state of the threads may provide some clues.
    Jenny

  • IPhone Cross-platform Sync Issue

    I sync as follows:
    MS Exchange/Outlook 2007/Windows XP SP2 <--> Plaxo <--> iCal/Leopard <--> iPhone/1.1.3
    All works well, except:
    Calendar entries: Multi-day, all-day, non-recurring entries created in Outlook sync properly to Plaxo and iCal, but show up on the iPhone extended by one-day; e.g., an event spanning Jan 11-13 shows properly in Exchange, Plaxo and iCal, but shows up in the iPhone as Jan 11-14. When synced back to iCal, these events are NOT extended by one day. Events created in the iPhone and then synced back to iCal, Plaxo and Outlook do not exhibit this behavior. I've upgraded to the latest build of Plaxo, deleted the sync points and iCal calendars and started over, but it still does this. Is there some inconsistency in the Outlook data format that might be causing this? Everything is on Eastern Standard Time.
    Thanks,

    Fixed. Plaxo for Outlook update 3.8.0.64 fixed this so that all-day events sync properly. Thanks to Drew at Plaxo support forums for the info.

  • Dir 11.5 cross platform anomaly - Mac projector goes dormant after visiting a website

    Hello,
    I'm working out the last of the kinks in a cross platform projector built in a Windows environment using Director 11.5.
    I've encountered one kink that I can't seem to eliminate.
    One of the functions of the projector allows users to visit various websites through Buddy API's OpenURL command.  It works perfectly in the Windows domain, and it almost works perfectly in the Mac domain except...
    When you close the website and return to the projector on a Mac the projector seems to be dormant in that buttons wont highlight.  However if you click anywhere in the stage the projector comes back to life and all is good again.
    Has anyone else encountered this and if so how did you resolve it?
    TIA!
    Karl
    Tallahassee, FL

    Yep, animate in the background is enabled.
    The projector works perfectly in the Windows realm and except for this one anomaly it works in the Mac realm.
    Keep the thoughts coming!

  • New Projector Exporter for Flash Pro CC (cross platform)

    Hi All,
    We have a new cross platform Projector Exporter for Flash Pro CC available as an extension at the below location:
    [http://nipunasthana.wordpress.com/projectorforflashcc/]
    Thanks,
    Nipun Asthana
    Flash Professional Team

    Projector Exporter has now officially been included with the new Flash Pro CC 2014 release!

  • Cross-Platform video

    Is there a work around to use WMV files when creating a
    projector for a PC when working in Director for Mac? I'm trying to
    create a projector for distribution via CD-Rom that won't require
    the end user to download a third party application (ie. Quicktime)
    to view video files.

    Thanks for your help Sean. I decided to go with Flash because
    I'll need it for other things in the future. The video works great,
    but I'm having problems with playback controls. I posted another
    topic about this, but here's a copy of what I was asking.
    >I'm creating a cross-platform projector to be distributed
    via cd-rom. I bought flash 8 so i could use the on2 vp6 codec for
    the video in my projector. I downloaded the update for Director
    10.1.1 with the flash 8 asset xtra, and the video is working fine.
    My only problem is I can't get any playback controls. I read in the
    flash 8 xtra addendum that it can't support the version 2
    components of which the flvplayback component is a part. Is there a
    way of getting around this and using the flvplayback component or
    can I create my own playback component that will work in Director?
    The video is 8 min. and I need at least play/pause and hopefully
    scrubbing. I am fairly new to director and brand new to Flash, I
    don't have much experience in scripting, but I can figure it out if
    I need to. Any suggestions would be greatly appreciated.

  • Golden Gate 11: cross platform replication

    hello,
    wonder if there are any cross platform (major) issues for establishing a two way  replication between Sparc Solarix 5.10 to x86 Linux based hosts ?
    RDBMS versions are same or 11.2 vs 12.1
    We are planing to use 12C gg on a new installs.
    thank you

    Hi,
        It would be better to ask this question in the GoldenGate community forum -
    GoldenGate
    or if you have access to My Oracle Support in the MOS forum -
    GoldenGate, Streams and Distributed Database (MO
    Regards,
    Mike

  • Issues when a cross platform android app is run on Blackberry 10 alpha simulator

    I am facing problems in running a cross platform android App in blackberry 10 Alpha simulator.The App works fine when run in iphone,android devices.But when I run it in blackberry 10 it doesn't load the template files hence a blank screen.The project is based on backbone framework hence template files.Currently the files are local in my hard-disk. I am loading the templates using an ajax call. The logcat output generated of the same is listed below:- 02-08 05:30:51.861: D/CordovaLog(233525377): {"readyState":4,"responseText":"","status":404,"statusText":"error"}
    I have added in config.xml file . Is there anything else I am missing to make the app run on blackberry 10?? I had the same issue with nook HD which was avoided by using super.appView.getSettings().setAllowUniversalAccessFromFileURLs(true); in the onCreate method.But since blackberry uses 2.3.3 of Android,I am unable to add the same settings. Please let me know If I am missing any specific configuration related content for blackberry 10.Thanks

    Hey Steve_web,
    This issue can be caused when MAC address filtering is enabled on the Wi-Fi network, and the MAC address of the BlackBerry Playbook is not accepted. Try adding the MAC address of the BlackBerry Playbook to the accepted MAC address list for the Wi-Fi network and test.
    The following article may be helpful as well:
    Troubleshooting Wi-Fi and networking on the BlackBerry PlayBook
    http://btsc.webapps.blackberry.com/btsc/KB26096
    Also if you contact the BlackBerry PlayBook support team they can do log review to determine the cause; you can find the contact information here: http://us.blackberry.com/legal/blackberry-playbook-complimentary-support-plan-terms-and-conditions.h...
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Does anyone have issues sending pdf's or jpg's cross platform and the images do not come through as an attachment. iMac OS 10.8.2

    Issues with mailk.
    When I send an attachment, if I drag n drop or actualy use attach. When it is sent cross platform, especially outlook. The person says the image is embedded in email. I tell them to right click and they say it saves to small.
    Anyone have any ideas, I am strictly aa apple girl. Never had PC so I don't know what to tell my clients.
    Thanks for any help.

    Lion Mail: If Windows users have trouble with your attachments

  • Cross platform power point videos - need help!

    I'm trying to create a MS powerpoint that will work on either windoze or Mac (my primary creation platform is MS office 2011 on the mac, but I also have MSO 2010 on an XP machine).
    I've somewhat mastered the issues with audio files, but am stymied with videos.  I have youtube donwnloaders for both the mac and windows, but cannot get a format with either that is supposed to work cross platform [I can't depend on any iTunes or other non standard apps on the windoze machines].
    According to a post on a MS help site, the video formats that are supposed to work crossplatform are:  MOV  M4V  AVI  WMV.  Unfortunately, neither of the youtube downloaders I have can create any of these formats that work.  The downloader on windoze can create an AVI, but PPT won't display it when I embed it in the slide.

    I'm trying to create a MS powerpoint that will work on either windoze or Mac (my primary creation platform is MS office 2011 on the mac, but I also have MSO 2010 on an XP machine).
    I've somewhat mastered the issues with audio files, but am stymied with videos.  I have youtube donwnloaders for both the mac and windows, but cannot get a format with either that is supposed to work cross platform [I can't depend on any iTunes or other non standard apps on the windoze machines].
    According to a post on a MS help site, the video formats that are supposed to work crossplatform are:  MOV  M4V  AVI  WMV.  Unfortunately, neither of the youtube downloaders I have can create any of these formats that work.  The downloader on windoze can create an AVI, but PPT won't display it when I embed it in the slide.

  • Cross platform issues with InDesign CS5 or earlier

    Potential client would like me (designer on a Mac) to design print docs which they can then edit on their PCs. Would love to hear feedback from others about any cross-platform issues/best practices suggestions. Thanks!

    No problem at all, the only thing you have to do is make sure you both have the same fonts in a flavour (Opentype) that you can both read.  So when you send them a Indesign document using these fonts they should be able to open it up on a PC without getting a "missing fonts" warning.  Once you've got that sorted you're away, I do exactly this all the time.
    Oh and of course you must have the same version of Indesign!  You can save back one version (or from CS5.5 to CS4) but it's not recommended for this type of workflow.

Maybe you are looking for