Help!!! (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)

Post Author: mrmc
CA Forum: General
Hi all,
Recently, I got problem on using cystal report on asp.net web. the error msg is:
Parser Error Message: The base class includes the field 'viewer', but its type (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer).
in the code:
<%@ Register TagPrefix="ce" Namespace="CrystalDecisions.Enterprise.WebControls" Assembly="CrystalDecisions.Enterprise.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" %>
<CR:CrystalReportViewer id="viewer" runat="server" AutoDataBind="true" HasCrystalLogo="False" Width="350px" Height="50px" HasToggleGroupTreeButton="False" DisplayGroupTree="False" HasGotoPageButton="False" HasRefreshButton="True" DisplayToolbar="False"></CR:CrystalReportViewer>
In web.config
<add assembly="CrystalDecisions.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=1234567890"/>
the server contains crytal report 9 (come from .net studio) and crytal report 11 (installed standalone).
I googled this problem, it seems a lot of people got this problem but no solution...
could anyone help me? Thanks!

Post Author: david.wilkes
CA Forum: General
You might try Removing the Reference and re-adding the reference. That seemed to get me pass this error, but I ran into another error that I have not figured out yet.

Similar Messages

Fim Error - The type f 'PictureURL' ( String) is not compatible with the type of 'SPS_MV_OctetString_PictureURL' (Binary)

Hello,
In my farm, Sycnhronization has been broken - however FIMSycnServices are started and running.
I am getting application error with event ID 6801 and MS has suggested to recreate and application proxy in one of the support forum as below :
https://support.microsoft.com/kb/2520394?wa=wsignin1.0
However , I was checking the FIM tool and came across Error by executing following steps:
1) Open MIIS Client
2) Click Managment Agents
3) Ricght click Extensible Connectivity and select Properties
When I click on Configure Attribute flow - its throwing following error message as mentioned in screen !
Would you please let me know why this error and what is resolution ?
Your help will be highly appreciated.
Thanks and Regards,
Dipti Chhatrapati

Hi,
Thank you for your post.
I'm trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Best Regards，
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

I'm unable to backup my iphone. It is saying 'iTunes could not backup because the backup was corrupt or not compatible with the i Phone.' i deleted my previous back up but it still isn't helping. Any suggestions ?

I'm unable to backup my iphone. It is saying 'iTunes could not backup because the backup was corrupt or not compatible with the i Phone.' i deleted my previous back up but it still isn't helping. Any suggestions ?

Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
Delete the entire Backup folder if there is anything at all in it.

HT1414 I get a error,(( Itunes could not restore the Iphone on marks Moblie Because the back up was corrupt or not compatible with the iphone that is being restored.)) Help please anyone My pc is Xp is up to date

I had a very larger OTHER folder in itunes, Went and ask Apple rep at shop today and he advised to do a restore but 1st back..
I back up and then did a manual back to make sure it was done.
Then i started iphone restore, all done and now to restore back up.
But i get a error,
""Itunes could not restore the Iphone on marks Moblie Because the back up was corrupt or not compatible with the iphone that is being restored.""
My pc runs XP and software is up to date, checked this before back up.
Disable Anti Virus
Checked itunes is up to date. Ok
Unplug all leeds at back of my pc, except key board & mouse/monitor.
Unpluged Modem.
Did restore again but get same error message,
help please.

Try this -
http://support.apple.com/kb/TS2529
Best of Luck

I have and existing web site and domain name. I'd like to know how to import into iweb. I currently use Yahoo's sitebuilder to build my site but Sitebuilder is not compatible with the iMac

I have and existing web site and domain name. I'd like to know how to import into iweb. I currently use Yahoo's sitebuilder to build my site but Sitebuilder is not compatible with the iMac

Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the creation of the new site with iWeb.
OT

HT204269 itunes showing 'backup is corrupt or not compatible with the firmware you restored'.Please help.

itunes showing 'backup is corrupt or not compatible with the firmware you restored'.Please help.

Hi Ckuan,
Thanks a lot for your advice.
Deleting the correupted back up means to delete the information of one month since the last back up I made is one month ago.....right?
This back up I made right before I restored my iphone. During the restore however my OS was upgraded to 5.1.1. and reading the comments on the internet it seems I am not the only one whom experience this problem.
Can it be that if I downgrade my OS back to 5.1. the back up will not be considered as corrupted? If so, how do I downgrade the iphone?
Thanks in advance.

HT4972 After upgrading iPhone 4 to iOS 5.1.1 getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored" HELP!

I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored".
I have tried restoring factory settings but iTunes simply will not restore from back up & I'm not sure what else to do!
Any advice would be much appreciated.

I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.

I tried to restore a bacup from a 32Gig iPhone 4s to a 32 Gig iphone 5C and get the message backup was corrupt or not compatible with the iphone that is being restored. Please Help

I tried to restore a backup from a 32 Gig iPhone 4s (That seemed successful) to a 32 Gig iphone 5C and get the message "backup was corrupt or not compatible with the iphone that is being restored" Can anyone assist?

I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.

The provider is not compatible with the version of Oracle client

We are running Server 2012 64 bit with multiple homes one is 32 bit and the other 64 bit. We installed the 64 bit first then the 32 bit next in order to get our Classic ASP WebSite that is using COM+ and OLEDB to see the provider.
C:\oracle\product\12.1.0\x86
C:\oracle\product\12.1.0\x64
The other Websites are ASP.Net 4.0 and are running in 64 bit application pools. They are using a DAL .Net assembly built x64 with a reference to the 64 bit ODP.Net version 4.121.1.0 in C:\oracle\product\12.1.0\X64\client_1\odp.net\bin\4.
I also see there is another folder C:\oracle\product\12.1.0\X64\odac_1\odp.net\bin\2.x with version 2.121.2.0. We are on running Framework 4.0 but when I switch to this version it works but with the version out of the bid\4 we are receiving the following error when the 64 bit Websites call the assembly:
The provider is not compatible with the version of Oracle client
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Source Error:
Line 87: mDataSource = dataSource
Line 88: mConnectionString = GetDBConnectionString(dataSource)
Line 89: mConnection = New OracleConnection(mConnectionString)
Line 90: mParams = New List(Of IDbDataParameter)
Line 91: End Sub
I have not been successful in getting this to work after spending endless hours, so any help would be appreciated.

Hi,
Oracle Client/ODP build with certified Visual C++ Libraries so application using ODP.NET requires "runtime components of Visual C++ Libraries" to be installed.
Oracle Database Client installation includes the Visual C++ Libraries but ODAC doesn't contain these libraries which may cause such issue.
Please check the Note 43208.1 for the particular version of Visual C++ installs with Oracle Database Client installation(e.g. 11.2.0 Database Client installs Visual C++ .NET 2005) and also you can refer the windows event log error massage to verify which version of Visual C++ is missing.
thanks and regards
Venkat

The provider is not compatible with the version of Oracle client... again!

Please, please, please help me!
I get the error, "The provider is not compatible with the version of Oracle client", intermittently on my Test Server. Strangely, without restarting the server or IIS, my application suddenly decides that I don't have the right Oracle client. I don't have any such issue on my local machine even though I'm using the same Oracle 11g client from Beta 1.
I have Oracle 11g (D:\Oracle11g\product\11.1.0) installed. I tried specifying which assembly to use in my web.config:
<compilation debug="true" defaultLanguage="c#">
<assemblies>
<add assembly="Oracle.DataAccess, Version=2.111.5.10, Culture=neutral, PublicKeyToken=89b483f429c47342" />
</assemblies>
</compilation>
I'm not even trying to use a 10g client with the Providers as discussed here: "The provider is not compatible with the version of Oracle client"
What I don't understand is why this error comes and goes?!?! Has anyone experienced anything like this?

The server is Win 2003. The local development machine is WinXP.
...I was trying to wait to install Beta 2 because of the nasty bugs reported on this forum.
I'm now seeing that ORACLE_HOME wasn't set on my server because my co-worker removed the path. Somehow it was able to find an Oracle Home on the server, but apparently, it didn't always find the same home causing this error intermittently.
Now, my question is how can I get my application to use the 11g Client as its Oracle Home, while my co-worker can use 10g Client as his Oracle Home? To be a bit more specific, he needs to use an ODBC client to connect because his application uses Classic ASP.
Is this possible, or are we going to have to set up separate machines?
Bee

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

Error :"The provider is not compatible with the version of Oracle client"

Hi guys!
I'm facing this problem:
When my .Net application tries to access the DB, I get this error message above.
The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
-Oracle Data Provider for .NET 1.x 10.2.0.2.20
-Oracle Data Provider for .NET 2.0 10.2.0.2.20
-Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
-Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
-Oracle Provider for OLE DB 10.2.0.2.20
-Oracle Objects for OLE 10.2.0.2.20
-Oracle Services For Microsoft Transaction Server 10.2.0.1.0
-Oracle Net 10.2.0.1.0
-Oracle Universal Installer 10.2.0.2.0
Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
These are the Oracle assemblies installes in 'C:\Windows\Assembly':
Windows Vista Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Windows Server Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
What should I check and do to solve this problems?
Thanks for help,
Anderson

Hi,
Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
- Read & Execute
- List folder contents
- Read
Regards,
Mark

Provider is not compatible with the client

Hi,
I'm new to this forum so I don't know if this prob was already posted.
It might be something that i misunderstood.
My application VB.NET is connecting to Oracle 10g database.
Using client from the ODAC 10.2.0.2.21 installation file.
DB version is 10.2.0.1.0
Even before connection is open application throws an exception:
The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize()
Any ideas?
Thanks for help ;O)
Nice day to everybody.
Renata Belakova

Thanks
1, I'm developing an application on Win 2003 Server with Ora10g DB 10.2.0.1.0
2, I developed an application in VS.NET 2005, VB.NET
3, Application works OK on develop. PC
4, my PC name, IP and DB name are the same as customers
5, i published application and went to install it on customers PC
I was thinking about the same environment on developing and customer PCs.
then i went to customer to try application on their LAN
1, They have DB server with the same version of DB and the same name of DB and the same name of server as i got
2, firstly I've installed ora client on customer computer not server
I've used ODTwithODAC1020221.exe file and installed client part
3, set up listener on clients comp
4, installed .net application on this client comp
5, run and got exception i wrote in previous message
Im really not an Oracle professional. I'm a .NET developer but fist time in my life developing application under Oracle DB (mostly was using Microsoft SQL ...)
So I don't know if these steps were OK .... but it's what i've read.
Thanx ...

'The provider is not compatible with the version of Oracle client' exceptio

Hi
I installed ODAC-11.1.0.7.10 Beta on my development system and developed a .net application which uses Oracle.DataAccess.dll to connect to Oracle10g database.
the application is working fine, means opening connection successfully when I run it from my development system. but the same application is throwing
'The provider is not compatible with the version of Oracle client' exception when I run it on my 10g database server system.
what I need to do to run the application successfully on the machine where 10g server exists?
any help is appreciated.
thanks,
harry

Hi Harry,
I am not sure why you installed 11.1.0.7.10 Beta as 11.1.0.7.20 has been released and you should not be using the beta at this time. That error message is because the dependencies being loaded by the process are the wrong version. When you deploy an ODP .NET application using 11.1.7.x, you need to make sure you deploy it to a machine where the 11.1.0.7.x dependencies are installed. My guess is if I read your poat correctly is that Oracle.DataAccess.dll version 11.1 is loaded but its finding 10.2 dependencies on the target deployment box.
HTH
Jenny

Help!!! (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)

Similar Messages

Maybe you are looking for