Help: Custom Encoder + Netbeans 5.5.1 enterp. pack

Help me, please:
All points are finished in the Installation Guide for installing CustomEncoder component (link for guide - http://www.glassfishwiki.org/jbiwiki/Wiki.jsp?page=EncoderInstallation chapter "Installation Process for NetBeans IDE 5.5.1")
Trouble: Local menu (window) for managment Encoder Properties is not appear, how it show on the picture : http://www.glassfishwiki.org/jbiwiki/templates/brushed/scripts/iepngfix-blank.gif
Thanks

I did install the Adobe Support Advisor before posting. ASA was a little quirky on the Mac as well, but I finally got it to work; however, it reported no issues. Thanks for the suggestion though.
What I ended up doing was moving the AME directory to the root level on the system - and then back to it's original location in the Applications folder (same location it has been in). This must have updated something on the OS side because once I ran the updater again - all updates installed successfully.
I'm not sure how the issue came about, but it appears that the OS or Adobe had some incorrect information in a config or installer log file somewhere and by moving the folder out and then back it was resolved/updated.
thanks -
j

Similar Messages

  • Media Encoder Help | Working with custom encoding presets

    This question was posted in response to the following article: http://helpx.adobe.com/media-encoder/using/custom-encoding-presets.html

    Default settings produce separate audio and video files.  If you want video and audio in a single file you must enable Multiplexing.
    Jeff

  • Set up for custom encode preset in Compressor for ATV2

    using compressor 3.0.5 i would like to set up a customer encode preset for atv2.
    ver 3.0.5 of compressor was released prior to atv2 so i would guess the current preset is for atv1.
    here is a screen copy of the specs:
    Name: H.264 for Apple TV
    Description: H.264 1280x720 video @ 5Mbps, progressive. Audio is 44.1 kHz, stereo
    File Extension: m4v
    Estimated file size: 2.1 GB/hour of source
    Device: Apple TV HD
    Frame sync rate: 5 seconds
    Video Encoder
    Format: QT
    Width and Height: Automatic
    Pixel aspect ratio: Square
    Crop: None
    Padding: None
    Frame rate: (100% of source)
    Frame Controls: Automatically selected: Off
    Codec Type: H.264
    Multi-pass: Off, frame reorder: On
    Pixel depth: 24
    Spatial quality: 50
    Min. Spatial quality: 50
    Temporal quality: 50
    Min. temporal quality: 50
    Average data rate: 5 (Mbps)
    Maximum data rate: 14 (Mbps)
    Audio Encoder
    Format: MPEG4
    Sample Rate: 44.100kHz
    Channels: 2
    Bits Per Sample: 16
    AAC encoder quality: high
    Data rate: 128 Kbps
    What changes should be made?
    Thanks in advance.

    You have to add the Service Offerings and the Request Offerings in the Catalog Group. Nesting doesn't work because Service Offerings and Request Offerings are different types of objects.
    This offers the option the manage the access to Service Offerings and Request Offerings very granular if needed. For instance you can control access to a Service Offering in one Catalog Group related to one user role (A) and use two additional Catalog Groups
    with different Request Offerings related to other user roles (B) and (C). Result will lead to:
    User in Role A and B -> Can see Service Offerings A containing Request Offerings B
    User in Role A and C -> Can see Service Offerings A containing Request Offerings C
    User in Role A, B and C -> Can see Service Offerings A containing Request Offerings B and C
    User in Role A only -> Don's see anything because of the missing permission on any Request Offering. So the "empty" Service Request won't show up in the portal.
    Hope his helps.
    Andreas Baumgarten | H&D International Group

  • Difference between WinentupgradeforSA and Winentupgrade license do both these licenses help customer downgrade to Win7 enterprise .

    Difference between WinentupgradeforSA and Winentupgrade license do both these licenses help customer downgrade to Win7 enterprise .

    Hi,
    Just to make a supplement, you can refer to the contents of the link below for the description about SA:
    http://www.microsoft.com/licensing/software-assurance/
    Roger Lu
    TechNet Community Support

  • Adobe Premiere Pro Help | Customizing the Project panel

    This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/customizing-project-panel.html

    Honestly, you did not get my point.
    What I am saying is, that the icon view has no rational order of files. Why is that?
    At least there should be a way to figure out, even if it is not possble to alter the sort criteria, in which order the files are listed in icon view.
    If I serach for a spezific file, sure I can use list mode, but what about "there were a couple of frames with that car, and it was shot after file X … a just let me fastly scrub trough the footage in that brandnew icon view … wait … where is … aehm .. ok, I scrub trough every file."
    Do not get me wrong, I love the new icon view possibilities so much, that I want to actually use them.
    Please just fix it Adobe, or tell me how to decrypt the sort mechanism.
    Am 13.09.2012 um 03:02 schrieb Jim Simon <[email protected]>
    Re: Adobe Premiere Pro Help | Customizing the Project panel
    created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
    How should an editor use this view seriously?
    Honestly, to sort manually.  If you want an auto sort, use List view.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4694701#4694701
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4694701#4694701. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Netbeans 6.0 Visual Web Pack and facelets

    Is it current possible to use Netbeans 6.0 Visual Web Pack and facelets and/or Seams?
    If so please point me to some useful resource.

    >
    ...Below is from the Launch tab:>What exactly is a 'launch tab'? Are you talking about some NetBeans window?
    The reason I ask is that the 'JNLP file' shown, is complete rubbish. It is a bunch of symbols pretending to be a JNLP file. The fundamental problem is that it is invalid (and hence it is not the 'JNLP format' it claims to be).
    How any particular Java implementation deals with an invalid JNLP file is quite unpredicatable.*
    Please people, do not just 'presume' that you (or your IDE) can write a valid JNLP file. Instead - validate it against a DTD or XSD.
    After all.. Garbage in, Garbage out!
    * And to the poster who mentioned that adding the first Jar line twice solved the problem. That is a dangerous and fragile kludge. If it works in some specific microversion of Java, it might (probably will) break in the next.
    Edit 1 - Highlit the most major error in that file using 'code' tags. Hopefully that will make the basic problem more obvious..
    <j2se version="1.5+" java-vm-args="-Djava.endorsed.dirs="C:\Program Files (x86)\NetBeans 6.0.1\java1\modules\ext\jaxws21\api" "/>Edited by: AndrewThompson64 on May 21, 2008 9:20 AM
    Edit 2 - Added possible alternatives..
    <j2se version="1.5+" java-vm-args="-Djava.endorsed.dirs='C:\Program Files (x86)\NetBeans 6.0.1\java1\modules\ext\jaxws21\api' "/>
    <j2se version="1.5+" java-vm-args='-Djava.endorsed.dirs="C:\Program Files (x86)\NetBeans 6.0.1\java1\modules\ext\jaxws21\api" '/>The hard coded path, as well as the use of unescaped backslashes (e.g. '\' as opposed to '\\') also looks suspiciously wrong, but since I only deploy off the internet, I am not entirely sure.
    Edited by: AndrewThompson64 on May 21, 2008 9:26 AM

  • Please help about encode password idm !!!!

    Hello All,
    I'm a newbie in IDM and in my work I have to encode password with CBC Algorithm before insert password in database (SQL server 2005).
    So I have already coding CBC Algorithm but I don't know where I put my CBC encoding Algorithm for when users change password on IDM.
    Please help me.
    Thank you for advance.
    waltt

    I'm assuming you're not talking about storing the password that way in the IDM repository but rather a separate database resource.
    I had a similar requirement with a different encryption algorithm and an Oracle database. I made my life a lot easier by having the database resource do the encryption. IDM will insert the password into the resource as plain text and, in my case, a trigger will catch it, call a stored procedure to change it from plain text to encrypted and then insert it. Since IDM never reads passwords from resources anyway the password was fully encrypted as stored in the resource and IDM never knows any better.
    Technically speaking you could have created a rule or custom form to do the password encryption before IDM sends it over the wire but if you've got an encrypted channel to the database then you might take my approach and skip having IDM do it altogether.

  • Help Customizing Motion Menu

    Hello:
    I am trying to customize one of the motion menus that came with Encore CS2. Its called Television Menu.em   This is the first time I've tried customizing a motion menu. I've had no problems customizing the non-motion menus, even animating them in After Effects. The first problem here is that I need a widescreen version which of course isn't included. So I took the 4x3 menu and edited in Photoshop by creating an NTCS DV Widescreen 720 x 480 canvas, and then copying and pasting everything from the original .psd file into it. And then put in a nice background that blends with the color scheme. So haven't really changed anything from the original menu .psd file.  Saved that out, brought it into Encore, and connected it to the .wmv file that comes with this particular motion menu.  Rendered it out as a motion menu. Preview. Nothing!!!  No snow on the TV!  I haven't even gotten to the steps where I move all this into After Effects to animate stuff in and out, because I can't get the thing to work right in Encore even without doing any After Effects work.  Best I can tell, it must have something to do with the fact that I made the .psd part of the menu into widescreen and for some reason, it won't play the connected video file.  Sure would be nice if I could find this particular menu in widescreen, but since I can't, I just thought I'd make it myself.  Hmmm. I am stumped as to why I can't get past this seemingly simple step. Must be something I don't understand.
    Any ideas or suggestions cheerfully accepted!
    Thanks,
    Dave

    Hi Addison,
    Here is a sample which renames customers and search entries from crm menu:
      "menu-customers-manage":     
          "title": "Site Members List",
          "parent": "menu-customers",
          "weight": 1
      "menu-customers-search":     
          "title": "Site Member Search",
          "parent": "menu-customers",
          "weight": 10
    You have to specify parent attribute for children menus which you rename.I hope it helps.
    Regards,
    Radu

  • Help custom video size

    Hi everyone,
    Wistia, a video hosting service has a video on their homepage http://wistia.com/  
    how can I make a  video with odd size dimensions like this?
    I have attempted using "desktop" instead of a pre-set and then using custom dimensions. Please help.
    [email protected]

    Hi Harm,
    After I create a custom size in desktop the video outputs with black bands on top and bottom. I must need to change the video size in more than one area but don't know where? please help.

  • Please help customer service has done NOTHING for

    I have had my creative zen micro player for about 8 months and having problems with it...When I put in the battery it won't work, but if I move it around to different spots it works for about 2 seconds and turns off. It has a full charge becaue if I hold it in that position it stays on and you can see the full battery. I've tried everything, I e-mailed customer service, but got nothing so I'm hoping that someone out there will be able to help me. I'm about to die without music .
    Dakota

    I sympathize with you not having any luck with Customer Service. I have had a long standing issue with them (I sent off email number 54 this morning). I have tried to escalate the problem by requesting the name of the Australian manager (I have asked in writing for this times) but every time they ignore my request. I am on my second Creative Zen Micro which is riddled with faults - just like the original unit. I have spoken to a representati've of customer service on the phone and he promised certain action but has failed to deli'ver (that was 55 days ago). Hopefully someone in Creative, maybe the Australian manager, will read this and help resolve my problem. Do not give up the fight... I'm not.

  • Search help Custom Table.

    Hi Experts,
    I have a custom table with 4 fields.
    On the selection screen i have these exact four fields too.
    I designed a elementary search help as well.
    Now my requirement is.
    On selecting a row in F4 all the four fields have to be filled.
    The selection screen parameters should be filled only upon selecting the values from search help.
    regards,
    Kevin.

    Hello Kevin,
    try to define the 4 fields as EXPORT parameters in the search help definition. The screen fields definition might have to be changed (cf. [search help attachment|http://help.sap.com/erp2005_ehp_04/helpdata/EN/cf/21ee93446011d189700000e8322d00/frameset.htm] ).
    You can also overwrite the fields values in a [search help exit |http://help.sap.com/erp2005_ehp_04/helpdata/EN/cf/21ee52446011d189700000e8322d00/frameset.htm], but consider your ROI first. It is a lot of work for a what seems to be a small effect.
    hope this helps,
    J. N. N.

  • Help with encoding windows media file

    Hello, I have recently stared using After effects to edit some movies.  Basically I am importing some .wmv videos (with sound), adding some visual effects to them and and want to export them just like they were but with the effects.  After that I will then want to copy the videos to an external hard drive and be able to connect it to a Sony blu ray player and watch them on the tv.  The entire process works fine with the videos before all the editing happens.  But something happens to the audio.  It plays fine on the PC but when I play it through the blu ray player, there is no sound and it says it is"this audio type is not supported."
    My best guess is that it looks like AE wants to encode the audio with Windows Media Audio 10 Professional by default and it's possible that the bluray player can't play that. Does this sound right to you?
    I know you can choose Windows Media Audio 9 and 9.2. for the output but 9 played back in slow motion sound and I'm currently waiting for 9.2 to export.
    Any advice for using another codec like AVI or FLV?  Or maybe something else?
    Thanks so much for any help!!!!
    Cheers,
    Aaron

    I suggest exporting your files through Adobe Media Encoder (AME). It has Blu-ray encoding presets, as well as handling WMV encoding better than After Effects.
    Here is the AME forum:
    https://forums.adobe.com/community/ame

  • I will pay for help, Media Encoder and Premiere Pro C4 won't work together

    I know someone has two easy answers...help, help.
    Big Problem one, exporting from Premiere C4, forced into using Media Encoder, which sit there and won't encode from the project/timeline.
    The project is even small, 7 minutes, and I just want to me a AVI file and maybe Flash and Media Player.  Is that too much to ask.
    Then the versioncue.dll, decide to not let me right click in explorer and other links, get a windows error, and again, stuck with nothing.
    Please, I will send someone a gift card if they can help me, really. $25-$50...depending on if you have the solutions.
    [email protected]
    828-778-4854

    Stan, that's correct, however, it's a new computer now.  And yes, I want to
    export to avi from the premiere time line.
    One thing that is weird, I can add to Media Encoder only finished encoded
    files, say to send to a client in a media player
    or flash format, and all works well.  It's only the Premiere C4 project
    export????
    Thanks for any help you may be able to give me.
    Ernie Sigmon

  • HELP URGENT encoding

    I have about an hour to do this so if someone can help please do. I have a dvd that i'm burning. this vid file is an uncompressed SD quicktime 18 mins. when i watch the quicktime there is no pixelation or anything....it's perfect. in DSP though, i'm getting all kinds of pixelation after I burn out. I have used serveral different bitrates and the same result. The file that i'm burning is 44 Gb but in DSP it is 633MB? for some reason. how do i get the best quality....

    Taking anything to MPEG2 is going to hash it up something terrible. That's the nature of the codec. You can improvie it marginally by using Compressor to run your encoding manually, using markers to assits the processing and using multipass routines.
    None of which you have time to perform so show your best version and try to figure out DVD encoding when you have time. But a 44 gig original SD file that is 18 minutes long indicates you have done something odd and no amount of tweaking DVDSP is goig to help you at this point.
    bogiesan

  • Need Help - Custom Identity Assertor using MBenMaker known issue CR207766

    I am facing below WL 9 knwon issue in WebLogic 10. How to resolve it , do I need to create constructor in identity Asserter IMPL classes ? If yes, what goes inside constructor. Pls help as there is no reference for this issue in WebLog release after WL 9. Below is as in WL 9 site at
    http://edocs.bea.com/wls/docs90/issues/known_resolved.html
    CR207766
    The intermediate files that the WebLogic Server 9.0 BETA MBeanMaker generates erroneously includes two types of constructors for you to complete. One type is based on ModelMBean and the other type is based on RequiredModelMBean.
    The constructors that are based on ModelMBean will no longer be generated or supported after this Beta release.
    Workaround:
    When using MBeanMaker to create MBeans for custom security providers, supply content only for the constructors that are based on RequiredModelMBean.

    Not related to the issue. How do you build your project containing provider? Do you use workshop IDE build? Thanks

Maybe you are looking for