HELP!! Dashboard Post-it's or Stickies are suddenly blank.

The yellow stickies on my dashboard have suddenly gone blank. I keep some important info on these (I know I should have it backed-up elsewhere), and they're simply empty. The actual stickies are still there, but there's no text. I tried repairing permissions, but no luck. ANY HELP IS APPRECIATED!!

HI and Welcome to Apple Discussions ...
In Stickies make sure you have scrolled all the way up and down in the window. Sometimes your input is there, you just need to view the entire window.
Also, here's how to Save notes:
Saving sticky notes
You can save a sticky note as a text file before closing it. If you don’t save the sticky note before you close it, you’ll lose all the text in the note. If you don’t close a sticky note, it will be visible whenever Stickies is open.
To save a sticky note:
Click the close button in the top-left corner of the sticky note to close it.
In the dialog that appears, click the Save button.
Type a name and choose a destination for the text file you’re creating.
Choose a format from the Format pop-up menu:
Plain Text: Cannot include paragraph and font formatting or graphics and other embedded files.
RTF: Can include paragraph and font formatting. If you add graphics to a Rich Text Format (RTF) file, it is changed to a Rich Text Format Directory (RTFD) file.
RTFD: Can include paragraph and font formatting, as well as graphics and other embedded files.
Carolyn
Message was edited by: Carolyn Samit

Similar Messages

Iweb pages are suddenly blank.

When I open iweb all but the first page are suddenly blank. I've quit, dumped the .plist, re-started, repaired the preferences, dumped the cache - and still I can only see the first page. Online I can see the whole site, but to edit on my commuter, not so much. At first, when I look at the other pages, I can see the outline of the template, but then that disappears, too. The weirdest part is this happened on two computers! At first I could't even open the first page, but I'd backed up onto idisk, so I downloaded the file, but could only get the first page, as I said.

You've done the standard "fixes" so it might be time to reinstall iWeb. To do so you'll have to delete the current application and all files with "iWeb" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iWeb from the disks it came on originally and apply the necessary updaters.
OT

Help with POST data if multiple selections are chosen

I've created a form with a menu (list) that includes all 50
states. I'm using the POST option, along with PHP, to process the
form data, which will be emailed to me. The list-menu looks like
this:
http://askdave.info/help/states_menu.gif
and I have "Allow Multiple Selections" checked in the Property
Inspector.
If the user chooses multiple states, I want
EACH of those states to be listed in the email that I
receive. Right now, if I check multiple states, I only get
the very last state that's selected. For example, here's the
email I get after I check 5 different states.
http://askdave.info/help/formdata.gif
Problem--> In this email, only one state is listed
(Hawaii) even though I selected 5 different states. How do I get
the form data to list ALL states that are checked?
Here is what I have:
<form name="form1" method="post" action="process.php">
<input type="hidden" name="required"
value="name,phone,email,states,capital" />
And then for the menu that lists the states, I have:
<label>
<select name="states" size="7" multiple id="states">
<option>All States</option>
<option>Alabama</option>
<option>Alaska</option>
<option>Arizona</option>
<option>Arkansas</option>
and so on...
What am I missing? How do I get the PHP script to send
multiple values, if multiple values are chosen? (I'm new to PHP, so
go easy on me. I can post my code, if necessary.) Is this a PHP
issue, or do I need to add something to the HTML form?

Hi,
>>
I think DynaForm stands for Dynamic Form
>>
this makes some sense ;-) I was just wondering because there
is a pre-made script called DynaForm
here, but
it has a different "logistics" than yours.
However, both "DynaForm" versions are pretty basic, as they
just deal with non-multiple values - form fields like single line
input fields, texareas and non-multiple select´s. Your script
e.g. just loops through all existing form fields using the
"foreach" method:
//Pulls form fields & values.
foreach ($this->post as $field => $value) { // looping
through all form fields
if ( $field == 'required' ) continue;
$this->_addLine($field, $value); // here´s where the
field´s name/value consolidation happens
...and simply consolidates a field´s "value" with its
associated "name". The problem is : this method just works for
fields having just 1 value -- but any "multiple value" form fields
(e.g. your "states" select or checkbox groups which can pass
multiple values as well) actually require a separate "foreach"
treatment within the script, and this hasn´t been incorporated
here.
That said, I suggest using an other pre-made solution like
PHP
Form Mail script that´s capable to handle your multiple
values - scenario innately.

Fields Like Category and Buttons Like Edit on Desktop Calendar Are Suddenly Blank!

not sure what the problem is. the preview calendar on the upper right just shows a dot, but not the dates!
Post relates to: Tungsten T2
This question was solved.
View Solution.

Please respond back with these questions answered so we can further assist you.
OS of your PC? Vista, XP or Mac
Version of Palm Desktop?
Also have you uninstalled Palm Desktop and reinstalled?

Error while posting Customer with Multiple sales areas using DEBMAS05.

Dear experts,
We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05. we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error: "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created! The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization). OSS Note (384462) provides further details about this. One Important point from the note is:
"As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
For your customers, contact persons exist to which a private address or a different business address is assigned.".
This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
If someone have experienced the same issue before and have found a solution to it, kindly help out.

I have found the cause and solution to this problem.
This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
This was resolved by splitting the IDOC into 2.
The solution is to First post only the KNA1 segment and create the customer.
In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”: you would have got the KUNNR after the first step.
Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC.
I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
Cheers
Venkat

When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code".

Hi Experts,
When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code". As checked, we have configured OBCD and OBCA for the vendor and we are passing the Tax Jurisdiction code in E1EDP04 SAL segment. Can anybody give us some idea to resolve this issue.
Regards,
Sameek

Hi Sameek,
Please refer the below link. Hope it helps.
http://scn.sap.com/thread/1435286
Regards,
Chandan.

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

[solved] usb-storage-devices (sticks) are not longer mapped via citrix

Hello,
at work we have linux-clients (Arch, Plasma5, updated weekly) connected to a computing center (Win 2008 Servers) via citrix-receiver. In the past, usb-storage-devices were mapped, so we could acces them in Win. Now, they are not longer mapped. I can't say, since when. USB-Sticks are not in daily use. The computing center says, nothing has been changed there. So can someone help me to fix this issue?
Found solution myself: https://wiki.archlinux.org/index.php/Ud … udisks2.29
Last edited by uhoso (2015-04-23 08:57:49)

Hello,
at work we have linux-clients (Arch, Plasma5, updated weekly) connected to a computing center (Win 2008 Servers) via citrix-receiver. In the past, usb-storage-devices were mapped, so we could acces them in Win. Now, they are not longer mapped. I can't say, since when. USB-Sticks are not in daily use. The computing center says, nothing has been changed there. So can someone help me to fix this issue?
Found solution myself: https://wiki.archlinux.org/index.php/Ud … udisks2.29
Last edited by uhoso (2015-04-23 08:57:49)

Hi, I need help. yesterday I copied one of my photo albums from my computer to Ipad 6 , using itunes. The album was successfully copied but my already few existing photo albums are suddenly empty, The album title is there but no photos inside.

Hi
Need your help. Some of my photo albums are showing as a blank after copying a photo album from my computer to ipad 6 using itunes. Can anyone help., Those albums were my treasure and i do not have any back of those.

It's better to post the URL of the feed (as you have subsequently done) than the contents of the feed .
From the FeedValidator report the feed is basically OK for iTunes. There are several occasions where 'content:encoded' sections (following immediately on 'guid' tags) should be enclosed in
<description>...</description>
tags: however all this will be ignored by iTunes anyway and only applies to other readers. The 'potentially dangerous content' referred to by FeedValidator is within the 'content:encoded' tags and so isn't relevant to iTunes. They are referring to an inline css style, and I don't know whether this might cause a problem elsewhere.
You should really have a language tag, e.g.
<language>en-us</language>
(you have a dc:language tag but that's for a different system). This should be placed in the top section, before the first 'item' tag.
It's advisable to have an 'itunes:explicit' tag for each 'item' -
<itunes:explicit>yes IF CONTAINS ADULT MATERIAL, OTHERWISE no</itunes:explicit>
it's not compulsory if you have no adult material, but you must have a 'yes' if you do.
You can check your feed by subscribing in iTunes from the 'Advanced' menu - this has the same result as clicking the 'Subscribe' button on the Store page. If it works OK there you are ready to submit it.

Please help with Posting Keys For Fast Entry (t.code OBXJ)

Dear experts,
Please help me to be more familiar with configurtation of Enjoy Transactions (t.code OBXJ). I want to configure fast entry transaction and change standard assignement of posting key. But there are no editing options in this transaction, just three transaction keys are predefined and posting keys are assigned to them (those are changable). But where to see what those transaction keys mean? And what could be your proposals, how to configure this IMG step?
Thanks!

Hi,
t.code OBXJ is for automatccly postings, normal you never change the standard posting keys.
In the block line items you can select colums you need and place the one's you need to the begin of the screen and in the right top corner of posting line items you can click an save this as (default) variant.
When you want to use an other posting keys you use the option complex posting (F6)
Paul

Posting assets to some depreciation areas

Hello SAP Gurus,
I have a Chart of depreciation with :
01 Corporative area (principal ledger)
02 Local area (local ledger)
03 Revaluation of local area
07 Fiscal area
08 Revaluation of fiscal area
Question is, how can I post to local or fiscal area without posting to pricipal area 01 ?. Using FB01 with a movement class that doesn't post on area 01 throws the followin error :
&CAUSE&
You have entered a transaction type which only updates depreciation
areas, which are not automatically entered in the General Ledger.
Therefore, no document can be created for Financial Accounting. In the
transaction you have selected, however, you can only post business
transactions with documents.
&SYSTEM_RESPONSE&
&WHAT_TO_DO&
Via the menu bar 'Postings' and pull-down menu 'Miscellaneous', you can
post without a document. Alternatively you can enter a transaction type
which updates the depreciation area and has automatic entry to the
General Ledger.
How can I do that without destroying the local balance for the local ledger. I need to user the counterpart account..
Help in advance.

If I understood you correct, your depreciation area does not post values in general ledger. And you wish to post something to that depreciation area and to have contra account in GL? That is not possible; or your depreciation area posts to GL and you will be able to use transaction type that corresponds to this requirement, or your depreciation area is not posting to GL and you have to use ttype which is not updating GL.
FB01 requiers creating of financial document and your ttype is saying that posting is related to depreciation area which does not post to GL. So, this is not possible. If you need posting in that depreciation area (which does not posts to GL) you need transaction like ABSO, not standard FI transactions.

When extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

when extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

Have you even tried the process in which i have described in my previous post?
Yes, many times. If you are setup to "extend a wireless network, the screen looks like this:
If you click the Wireless Options button, the screen looks like this:
Where is it on this screen that you see a setting to adjust the channel? It sounds like you are confusing "create a wireless network"....which does allow you to adjust channels.....with "exend a wireless network" which does not.
Normally, when you extend a wireless network, AirPort Utility used to always assign the same channel to the extending device. That is no longer the case. It might be the same, or it might be different. You have no control over this, so you have to accept what AirPort Utility thinks is best.

Upgraded to Leopard and now Stickies are gone

I just updated to Leopard and now my stickies are gone. The Stickies program is there but the stickies I had previously created are gone. Are they hidden somewhere?

This is my exact question. I had my stickies disappear twice, once when my computer panicked while in stickies and again when I migrated to Leopard. I've tried looking in the "Package Contents" but with no success. I've also looked for any trace of the stickies from Dashboard, and no luck with that either. SOmeone has to know where the actual text of the stickies are stored, and hopefully the user can access them.
Anyone know?
-Brian

My memory sticks are not being recognized by the computer...

I just installed 4 1gb sticks of memory in pairs and all of the same maker. I already had 2.5gb of memory installed. Once I turned on my computer and clicked the apple, it is showing that I only have the 2 gb of memory installed! Why is it not showing the other 4 gigs? It is saying those slots are empty and all 8 slots are occupied. I have a total of 6gbs but am only showing 2gb. I restarted my computer twice and keep getting the same result. All memory sticks are seated firmly in the slots as well.
Any suggestions?
I bought the memory sticks from a reliable vendor that sells Mac products.

I don't have the slightest idea of what you are talking about LOL! How do I do cold boot? How do I reset the nvram?
Another thing I noticed that was odd is that I took all memory out of the computer and installed just the 1gb sticks totaling 4gbs. Once I turned on the computer, my desktop screen would not show up on my screen. I got a solid blue screen instead. Once I removed all those sticks and replaced with the sticks previously installed my desktop screen returned! The new memory sticks are brand spanking new. Perhaps I could have had them installed incorrectly as I had them all in the same bank. I Will experiment again tomorrow.
Message was edited by: DVX100Shooter

We have a Dell computer with iTunes (which we have had for years) and are suddenly unable to open it. The message: This file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help!!

We have a Dell computer with iTunes (which we have had for years) and are suddenly unable to open it. The message: This file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help!!

See Empty/corrupt iTunes library after upgrade/crash.
tt2

HELP!! Dashboard Post-it's or Stickies are suddenly blank.

Similar Messages

Maybe you are looking for