Help DBA and Programmers shut out after site Move.

I am hoping that somebody will help me with this problem.
This week we Moved a group of application programmers to a new site due to
office space needs.
However we have a DMZ that is accessible from the internet for our customers
B2B business. Problem is we dont route that DMZ inside our Frame Relay
cloud.
And right now, the remote site cannot access the servers to manage, drop
code or maintan the apps.
For security reasons we do not want to route the internet facing DMZ through
our Global WAN. i have tried several solutions and none is working.
Before they were able to access their servers because we could use a static
gateway in one of our internal firewalls. So you still were in the WAN FR
but it was also local in the sense that the firewall has an interface in our
LOCAL LAN. We then PATTED the whole internal range. This time address
translation will not work because you still need to route the destination
address.
Can anyone suggest a solution.?

I want to make sure that I understand your new topology correctly, reflecting the new site where the app dev staff resides. I assume that the servers did not move, and the remote site that you refer to is not a customer B2B site, but rather the new site where the app dev staff resides. Is that correct? If so, then run an IPSec vpn between the router has an interface in the new site and the router that has an interface where the servers reside. This way you can keep the subnets you want hidden from the global routing table by protecting them by configuring the router that is in front to use IPSec for any traffic to and from that subnet.
Let me know if this was of any help.

Similar Messages

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occationally. Can we stop Firefox from timing out?

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occasionally. Can we stop Firefox from timing out? edit

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

Why is my iphone coming on only connected to a PC and then shutting down after 1 minute???????

Seriously need help. My phone is going crazy right after ios is installed. It turns on only with a PC and then shuts down after 1 minute? Never thought Id have problems with Apple.

I have had the same problem with my daughter's IPOD nano. Spoke with several technicians to try to fix the problem to be told it was a battery problem and to send it in it was covered under warranty. Was told that it was a problem with many of the nanos. I sent it in to have it returned with 1 week stating that it had "liquid spill or submersion damage indicated by the pink/red color of liquid submersion indicator located inside headphone jack." It has not had liquid or submersion damage and I can't prove otherwise. It works only if it is attached to computer. Will not turn on unless attached to computer. Maybe I am wrong but it it has damaged by water would it still work plugged into computer. Now I am out $200.00. This frustrates my because my ipod shuffle quit working 2 months after I got it. Thats why I bought the nano thinking it was better quality.

HT4356 What printers beside HP will work continuously with an i-pad? I tried Canon and Epson and both time-out after a short time, requiring the user to re-initialize. This defeats the idea of a wireless printer, Thanks Art

What printers besides Hp will work continuously with an i-pad? I tried Canon and Epson and both time-out after a short period of time rerquiring the user to re-initialize, which defeats the purpose of wireless printing. Please help, Apple can not. Thanks to all. Art

Canon support told me that the I-pad printer driver would not work with any printer, including HP. They offered to fix the problem for $50. I turned them down.
If they really could fix the problem, they must be saying to update the printers firmware. Look on the cannon website & update the priners firmware. While you at it, update the routers firmware.
What printer do you have?
List of supported AirPrinters.
http://support.apple.com/kb/HT4356

Hi my desktop starts and then shuts down after the apple logo and an oblong box appear.thanks

hi my mac
desktop starts then shuts down after displaying the apple logo and an oblong box.
thanks

Sounds like something is badly wrong with your system. First step would be to start up from your Mac OS X install disk, by inserting the disk and holding down 'c' at startup. Select your language, then choose Disk Utility from the Utilities menu. In Disk Utility, choose your hard drive and click the Repair Disk button.
If problems are repaired, try restarting and see if the problems are gone.
If problems couldn't be repaired, you can try DiskWarrior, which can sometimes repair problems that Disk Utility cannot. However, if nothing works, you probably are going to have to erase the hard drive and reinstall the system from scratch. Hopefully you have backups!
If there were no errors, or they were repaired successfully but that didn't fix the problem, then you should try booting into safe mode by holding down the shift key at startup. If that works, you may have some bad third-party software. What that might be is hard to say, though.
If nothing works, try rebooting from the Mac OS X install disk again and install Snow Leopard right on top of your current system. That shouldn't disturb your apps or data, but of course, if you don't have backups, you're in trouble if something goes wrong.

I open itunes and it shuts down after a brief period.

I open itunes with no device attached and it opens for a brief period and then shuts down with no warning message.

Hello msleuen,
Thanks for using Apple Support Communities.
To help troubleshoot this issue where iTunes is unexpectedly quitting on your PC running Windows 7, I'd like you to please follow the directions in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Take care,
Alex H.

It will not let me choose to NOT choose anything and just get out of site and sTOPn popping up everytime I log onto firefox

I do not want to do all these add ons from the site that pops up with firefox when I open firefox. I tried to stop the site or delete this site from popping up when i open firefox but i cant get it to stop and now am stuck in it to add ad-ons and there is no way to cancel or get out of site without downloading things I have no idea what they are and do not want them....how can i get out of this and stop it from popping up when I sign onto firefox?

Do exactly what it told you to do and contact itunes support

I-Mac shuts down after sitting for a while, why and how can it be fixed?

i Mac shuts down when left for a time in sleep mode. Am I missing something or is this supposed to happen?
It has never happened while anyone is using the computer but that may just be because it often sits over night without use.
Am using a logitech Wave USB keyboard and mouse because my wife likes it.

OK reset the SMC > http://support.apple.com/kb/HT3964
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Press and hold the power button for 5 seconds.
4. Release the power button.
5. Attach the computers power cable.
6. Press the power button to turn on the computer.
and check all of the power connections.
The iMac's are sensitive to power issues (sag or momentary outage) while in sleep mode. If in the Energy Saver preference "Start up automatically after a power failure" is unchecked (as it should be) then you could/would/should find the iMac off after a power problem.

My MacBook won't go passed a grey screen and the apple logo . It has a loading bar but doesn't do anything and just shuts down after the loading bar is complete... HELP!

Please please help! I'm a college student taking finals. Need it fixed asap

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 4
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 5
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 6
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 7
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 8
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 9
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 10
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 11
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

IPad wifi and Bluetooth greyed out after iOS5 update

After updating to iOS5 on my iPad my WiFi and Bluetooth were greyed out like the update has caused a hardware failure on the radio side. My SIM and 3G still work (not that I use it) but I can not even choose wifi or bluetooth in settings app as they are greyed out.
In Wifi it says "No Wi-Fi" and Bluetooth it says "Unavailable"
I wasn't using it a lot so just forgot about it for a while as it sat gathering dust being an expensive paperweight thinking that the next software (5.0.1) update would sort it all out. It doesn't. I have a 64GB iPad 3G with no wifi and as I am living abroad the 3G is useless to me (though only use the ipad at home on my wirless network anyway, or not as the case is now!!)
I have restored, factory restored, cleaned installed new software, everything I can think of but still there is no wifi and no bluetooth.
Has anyone else had this issue? My (very expensive) iPad is now next to useless!!
ANY help is VERY much appreciated.

thank you for fast response and sharing the link but i've tried everything including downgrade but it seems that theres a serious problem with MC497LL model and trying to reach to the support for any updates about it at least trying to inform them

Video playback slow and audio drop out after render

Hi
I have downloaded a trial version of After Effects from the cc,
Problem is everytime I render ou,t the video playback is slow and the audio drops out
This happens with AVI or Quicktime files.
Using a Intel i5 quad core, 8 gig of ram 250 gig ssd.laptop
Render/export in Premire pro is fine.
Can any one help.
Regards Phil Green
Blue Room Media.

It sounds like you might be hitting the space bar in hopes of getting real time playback. Sorry, but AE doesn't work like that, because it does totally different things from an editing application like Premiere.
And if you've downloaded the tryout version, you really ought to learn how AE works... and a short description is "it doesn't work intuitively". You can frustrate yourself in a hurry.
But this can really help;
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest

Help! My System shuts down after one minute of starting the PC

Help
I have just finished assembling my PC using the MSI PM8M3 – V motherboard with a P4 (LGA775 – 630) 3.0 GHz processor and 500w power supply. After assembling all the parts, when I start the computer within 30 or 40 seconds the computer automatically switches off. Is there any way to know what's wrong and solve it?
Thanks

Hi
Sorry about that since i am new to this forum and i am not sure how to create a sig line. Anyway below are the details of my power supply
OMNI PS ATX 500w
+3.3v - 30A
+5v - 50A
+12v - 25A
-5v - 0.3A
-12v - 0.8A
+5VSB - 2.0A
I tried starting the computer without my hard disk, and my CD RW and using only:
CPU
CPU fan
Motherboard
2 system fans
DDR RAM (512MB)
And it stll did not work.
When i start the PC, the system loads properly so i am able to access the BIOS but then then the system only stays on for like 30 or 40 seconds and it just goes off without making any sounds or showing and warning signals.
I tried using a diffrent 500w power supply but it still did not work!
If you need any info, please do ask and also, i'm not exactly sure on whats a D-bracket.
Thanks
Stewart

Snow Leopard - Safari and Entourage 'drop out' after a period of inactivity

Ever since I loaded up 10.6 (and later 10.6.1), both Safari and Entourage get the beach ball when my system has been inactive for an hour or more (time based problem?). Doing resets, clearing caches etc. do not seem to have any effect. The only effective way to get Safari/Entourage back is to restart the system (I thought I had left this behind when I waved good bye to PCs). Sometimes it appears that running Network Diagnostics has cleared it but this is not absolutely reliable.
My ISP tells me the system is up/available and it can 'talk' to my modem and they imply that it is an Apple software problem. Apple imply my modem is on the blink but get me to push some keys and the problem 'temporarily' goes away until after the next period of inactivity.
Any help would be appreciated.

Have you considered using wicd? I use it on this computer, and have had no problems with it. However, to be fair, the packages on this pc haven't been updated for a LONG time, so it is possible that if i updated it, I'd have the same problem. You didn't mention a wireless connection daemon, so I thought that I'd ask.

Can I install a app which is in my purchased list of another apple ID and then log out after installing of that app and then log in with my current apple ID in Mac App Store

I had upgraded to current OS X yosemite, I performed clean install and I also made a new icloud account and apple ID.
the previous apple ID have few purchased paid app like- "GarageBand"
now in my new apple ID I have to purchase it
I was wondering if I install this app by logging in with my old apple id and installing
and then log in with my new apple id.

Yes, you can sign out of the App Store, then Sign In using another Apple ID and download the apps associated with that ID, but when you get finished switching back and forth you will have a rather confused setup...updating is going to get cumbersome when you try and keep straight what software is associated with what ID. With your setup, it would just be simpler to purchase the app again so everything on your Mac matches and you don't have to try and remember what goes where.

I just purchased the i pod model MC525LL and it shuts off after a minute

Brand new to Apple, and a somewhat confused. When I turn on and play music, unless I am actively touching the screen, the unit will turn off. If I touch the screen and select play, it will pick up exactly where it turned off at. Kind of like a "sleep" mode. I have also selected "Reset Settings" and it did not work. Can anyone help a frustrated Windows guy?

Make sure your headphones are plugged ALL the way in, meaning no silver from the headphone's plug can still be seen. The white part of the headphones must be flush with the Nano.
B-rock

Help DBA and Programmers shut out after site Move.

Similar Messages

Maybe you are looking for