Help! Deactivation of account here when the device is sold to another person.

Do i have to deactivate my account here so that the new owner of the phone will be able to receive notifications, as well as to create their own account? Please help me!

"Here", this is a user to user community support forum.
You DO need to deactivate your BlackBerry account with your mobile service provider to whom you paid your monthly fees, Globe. Have them remove the PIN and IMEI of the device from your account. That will make it 'free' to set up for another user.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I've lost my iPhone 4... How can I find it when the device is offline when using "find my iPhone app"????? Any way of getting a location from it????

I've lost my iPhone 4... How can I find it when the device is off linesmen using "find my iPhone app"????? Any way of getting a location from it?????

No. It must be online in order to locate it.
What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

BB Desktop software crushes when the device is connected

Hi all
Each time i try the Blackberry desktop software it crushes when the device is connected . I tried instaling and reinstaling (using clen uninstall0 it to no avail . I checked the  Rim.Desktop.Exception log and i get this :
Date|Log Level|Thread ID|Module ID|Log ID|Message [2012-01-08 19:50:07.291]
19:50:50.320|FATAL|1|Exception|0|Fatal Error
System.InvalidOperationException: Unable to get the window handle for the 'RemoteWindowsMediaPlayer' control. Windowless ActiveX controls are not supported.
   at System.Windows.Forms.AxHost.EnsureWindowPresent()
   at System.Windows.Forms.AxHost.InPlaceActivate()
   at System.Windows.Forms.AxHost.TransitionUpTo(Int32 state)
   at System.Windows.Forms.AxHost.CreateHandle()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.IntCreateWindowEx(Int32 dwExStyle, String lpszClassName, String
Can anyone please help?

I'm having the same problem. Installed windows 7 professional over windows 7 home preminu.
Only see USB device if it's plugged in at startup.

If i purchase a device through this official website,then how can i send warranty when the device have problem?

if i purchase a device through this official website,then how can i send warranty when the device have problem?

To purchase a device from the online US Apple Store you will need a US credit card with a valid US address and a valid US address to ship to. You cannot use a shipping forwarder.
If you are in a different country you would have to return to the US to access your warranty.
If you are in the US but not near an Apple Store you would start here for service: https://selfsolve.apple.com/agreementWarrantyDynamic.do

Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

Hi Everyone,
I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
to another computer.
My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
The following are some details about the problem:
1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
I know this because a current is being read on the current meter connected to field point module.
My questions are the following:
1. What are the possible reasons for the data not being sent to the field point module?
2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
Thankyou very much for any help that you can provide. I greatly appreciate it.
Faen9901

Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
choose to provide LabWindows/CVI support.
Regards,
Aaron

App download stuck on waiting on iPhone 6 plus when the app is purchased on another device

iPhone 6 Plus on AT&T running iOS 8.1.2. When I purchase or "get" an app on my macbook, the app shows up on the 6 plus, but hangs in "waiting." The app, however, will download perfectly on my iPad mini. I have tried restarting the device normally, and restarting it while pressing the home and sleep buttons (hard reset?), resetting network settings, signing out of iTunes and back in, and even setting up the phone as new. The problem occurred before and after doing a complete restore and setting it up as new. The only solution that works is removing the app while in "waiting" status, and initiating the download from the 6 plus itself. I don't know if this is a bug that will be resolved in 8.2 or if I am missing something. (automatic downloads are on and set for both updates and new app downloads, wifi is working) There are no other problems with app downloads on the 6 plus; auto-updates work perfectly. This issue only happens when the download is initiated on another device.

Ditto!
I too have the same problem. Any luck for you?
I tried everything possible so far but nothing happened.

HT201270 MORNING COMMUNITY, anyone know how to make the i4s forget a network - when the device won't give you that option?

MORNING COMMUNITY, anyone know how to make the i4s forget a network - when the device won't give you that option?

if you dont have the options to forget network you can reset your network settings, but than the device forget all networks
settings > general > reset > reset network settings

Submitting form automatically when the device comes online

Hi Guru's
I am developing an offline adobe form that can be opened, filled and submitted on a mobile device like ipad.
I am adding a submit button to submit the form. When the device is online submit works and when offline appropriate message is displayed. I was wondering if device or reader submit form (previously submitted offline) automatically again. Is there any mechanism to check if the device is online again and send the pending forms automatically?
Thanks in advance.
Regards
Sunit

Hi Guru's
I am developing an offline adobe form that can be opened, filled and submitted on a mobile device like ipad.
I am adding a submit button to submit the form. When the device is online submit works and when offline appropriate message is displayed. I was wondering if device or reader submit form (previously submitted offline) automatically again. Is there any mechanism to check if the device is online again and send the pending forms automatically?
Thanks in advance.
Regards
Sunit

HT5463 In my opinion, when the Silence setting is "only when the device is locked", it contradicts the settings you set above, like Manual. Can someone explain how these settings work together?

Can someone explain how these settings work together? Manual seams to contraduct the SILENCE setting at the bottom of the Do Not Disturb page. It's very confusing.

You should have seen information in the support document that you linked from. It used to be with the first version of Do Not Disturb that it would only function when the device was locked. That changed with iOS 7, and not it can be active all of the time. With it on Manual, it is on, but if you have the device "awake" that you can still receive calls/texts, etc. Sort of like you have the phone awake, so it isn't a problem for you to receive things. If you set the settings for Always, this means you can be doing things on the phone and not be disturbed by anything else. Does that make sense?

Start up J2Me application on the mobile device when the device is swtiched

Hi,
Does anybody know how to start the Midlet when the handset is switched on ?
I have one J2ME application installed on the mobile. I got to start the application automatically when the device is switched on.
Thanks in advance
Mamatha

Hi,
Use
PushRegistry.registerAlarm(String midlet, long time);and keep time of 30 secs.
and once you application is inovoked unregister the connection
Regards
@rjun

I am unable to tell when the battery is completely charged. I have showing the battery symbol with the bolt-this is present even when the device is not being charged. And it is always showing 2% charge.

I am unable to tell when the battery is completely charged. I have showing the battery symbol with the bolt-this is present even when the device is not being charged. And it is always showing 2% charge.

Are you using the AC wall charger?
To check status, I use System Activity Monitor app http://itunes.apple.com/us/app/system-activity-monitor/id306192663?mt=8 and System Status Lite app http://itunes.apple.com/us/app/system-status-lite-device/id407752428?mt=8
 Cheers, Tom

Say if apple cant fix or replace a device do they email you before or do you have to wait to know when the device returns through the mail

say if apple cant fix or replace a device do they email you before or do you have to wait to know when the device returns through the mail

You can find out about its warranty yourself: https://selfsolve.apple.com/agreementWarrantyDynamic.do
There is a link beneath to determine its serial number. The warranty is transferable and stays with the iPhone.
While you're there register your iPhone in My Support Profile: https://supportprofile.apple.com/
That is a good place to keep all your Apple equipment's information.
If the seller already registered it have him un-register it. No one else can.

HT2101 Anyone else get the "iPod too hot" message, even when the device and ambient temp are both cool?

My iPod Touch 4 repeatedly gets the iPod too hot message, even when the device and ambient temp are both cool. Shuts itself off. Ugh!
Is this a warranty issue or is there a fix?

LED Cinema Display
24-inch, Late 2008 (1344 x 840)
AMD Radeon HD 6750M 512 MB graphics
Specifications
Â Model number: A1267
Â Resolution: 1920 x 1200 @ 60 Hz
Â Ports: Three USB 2.0 ports on the back
Â Camera and microphone: Built-in iSight camera with microphone Â Speakers: Built-in 2.1 speakers with 12 W output
Dimensions:
Â Weight: 20.92 lb. (9.49 kg)
Â Height: 18.84 inches (478.38 mm)
Â Width: 22.57 inches (573.22 mm)
Â Depth (with stand): 7.76 inches (197.10 mm) Â Viewable: 24 inches (609.60 mm) diagonal
Operating environment:
Â Operating temperature: 50° to 95° F (10° to 35° C) Â Relative humidity: 20% to 80% (noncondensing) Â Altitude: 0 to 10,000 feet (0 to 3048 meters)

E71 seems to play up when the device gets cold

I am having a problem with my E71 which seems to only occur when the device gets cold. The keyboard freezes up (cannot type or unlock my keyboard), the voice command thing turns on randomly (the annoying little beeping thing which follows with say a command).
If i put the device infront of a heater for a few seconds to warm it up it seems to work again. Anyone else having these problems? I live in Canada where it is always cold so the phone's problems need to be fixed.
Is this just my phone telling me it doesnt like the cold and is normal? Or does it need a visit to the phone shop to get fixed??
Thanks

hadimassa thanks for the response........ but would the battery only mess with the keyboard and make the voice commands randomly go off?? would it not mess with more of the phones features??
Thanks for ur time
Message Edited by brezza209 on 08-Jan-2010 02:29 AM

Help! Deactivation of account here when the device is sold to another person.

Similar Messages

Maybe you are looking for