Help decoding logs

Question

Just received some logs for a 5508 WLC and need to make sense of them. 
bsnAPCoverageProfileFailed: When Coverage Profile state changes from PASS to FAIL, notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable/disable using bsnRrmProfileTrapControlFlag
bsnAPLoadProfileFailed: When LOAD Profile state changes from PASS to FAIL, notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable/disable using bsnRrmProfileTrapControlFlag
bsnAPNoiseProfileFailed: When Noise Profile state changes from PASS to FAIL, notification will be sent with Dot3 MAC address of Airespace AP and slot ID of Airespace AP IF. This trap sending can be enable/disable using bsnRrmProfileTrapControlFlag
Do I need more info before I can determine what these mean or are they indicative of an eminent problem?

Answer 1

All of those messages come from RRM, the part of the WLC which is responsible for the configuration and tuning of the RF. You can find the current status of this profiles under Monitor -> Access Points -> Radios -> 802.11a/n/ac and 802.11b/g/n.
It depends on your deployment, location and site survey results if the default settings are appropriate or not. To give you an example; for a high density deployment in a busy city the default interference setting for 802.11b/g/n is most of the times to low which will cause interference profile messages.
You find the settings under Wireless -> 802.11a/n/ac / 802.11b/g/n  -> RRM -> Coverage / General.
Please rate useful posts :-)