Help - Dell 8300 Dimension Soundcard driver

+\ok, i have?this old Pc Dell 8300 Dimension. I recently upgraded my os to 32bits-win7 and it's working great except i have no sound. I went to dell driver site to download the creative lab - sound blaster driver but? it was only for xp. I tried with that xp driver but it didn't work. Any suggestions?! Any help will be appreciated! Thanks!

/Re: Help - Dell 8300 Dimension Soundcard driver<Well there is no for the Li've! in Vista and of course windows 7, but I have one that works in Vista and has to be worth a try in Win7 as the sound card drivers are very similar.
Have a look [url="http://www.filefront.com/0960626/SBL_VTDRV_LB_2_0_000A.exe/">here[/url].
SB Li've! series Vista Support Pack Created by daniel_k
This pack Supports all Li've! cards with a Hardware EMU0K DSP chipset (OEM / Retail models):
- Li've! PCI52 / 4. / Value / Player / MP3+ / X-Gamer / Platinum
- Li've! 5. MP3+ / X-Gamer / Digital / Platinum
Does NOT support the following OEM / Retail models:
- Host / software-based cards including Li've! 24-bit
- any external Li've! soundcards
NOTE: May have issues with more than 2 gigs of ram in Vista

Similar Messages

Static/Pop on my Soundblaster Audigy 2 in a Dell 8300 Dimension. Please help

Ok, granted my computer is 7 years old, but it has been flawless until recently. I don't know if it's my soundcard Soundblaster Audigy 2 (SB0240), my graphics card is the NVIDIA GeForce FX 5200. I have read about some NVIDIA conflicts, but nothing is new on my system since I bought it back in 2003. I have upgraded all the drivers on the SB0240 card and the graphics card and all the windows XP updates.
So could the static and hizzing mean my SB Audigy 2 card is bad and needs replacement? But before I do anything I wanted to ask the community for some advise on fixing and getting rid of the static/po
ps.
Thanks

Not that you should feel alone as there seems to be a myriad of people in the same boat as us, but I too have a similar experience. I've performed?everything posted as potential ways to resolve with no success. You mentioned that you were unclear about the PCI Settings component.
For me that seem rather simple. When the machine boots, hit whatever key needed to go into the bios (it is usually the Delete key on most systems). Look for a PCI settings that matches the latency resolution described. Honestly I never even paid attention to that setting in the BIOS before but after some poking around I found it and adjusted the settings as suggested.
I suspect that if look at all of the options in your?BIOS you'll find it.
After reading several posts on the suspect cause of the static and popping I?conceptually understand what lower the PCI latency does. Still?when you start changing things that have unknown implications, well I start to get nervous about things like that.
I took the risk because the problem is driving me nuts and I'm a bit masochistic and I won't stop until this is solved. In any event, be sure to capture the original setting so you can put it back after you're disappointed.
I must say that I was one of those that went and purchased an X-FI for another system that I bought. It doesn't crackle, it just refuses to work. I'm so disappointed as I have always used SB cards with zero issue and these latest generation ones are just not working.
Message Edited by kevvan on 03-2-2008 02:24 PM

How do i update my IDT soundcard driver? HP pavillion DV7 4032EO

Dear HP forum!
I've recently stumbled onto a problem between my IDT soundcard driver and my Punkbuster(anti-cheat program).
so when they collide it causes HARD freeze witch requires a manual shutdown or reset.
the IDT soundcard driver on the HP support site is so, so, so, old!
PLEASE HELP ME!
my device:                   HP pavillion DV7 4032EO.
my driver_id:               HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C149C&REV_1004
my 2nd driver_id:       HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_103C149C
Kind Regards
Magnus Peter Lassen
sorry for my rubbish english!
This question was solved.
View Solution.

Hi,
For video card, I know users can update Nvidia drivers but getting a lot of troubles to update ATI drivers. The machines just won't do the updates.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?

How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
CS 5.0 launches the internet browser. > TO SLOW I DONT WANT THIS.
CS 3.0 uses the local help files > I WANT THIS FOR 5.0.

You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
Community Help Application

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor 3.40 GHz 8 GB, 64 bit. Thank you for looking.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help with partitioning an external drive

I've never done this, so am not sure how it works. I have an external drive (250 gb) that I use with SuperDuper to back up my Mac. Now I have decided I also want to keep a separate iTunes library on this drive. Apparently, so that SuperDuper doesn't erase the new iTunes library, the drive will need to be partitioned.
So. . . I will use Disk Utility to partition that drive into two and call each section something different? Will each section then look like a different drive (for instance, in SuperDuper)?
Are there any tricks or tips I should know before running Disk Utility's partition application?
I have searched the forum for info on this, but most of the people seemed to have at least basic knowledge of how it works, so didn't get much help there. I want to ask before I go and erase the drive.
Thanks in advance!
Chris
Powerbook G4; Intel iMac 20inch Core Duo Mac OS X (10.4.7)
Powerbook G4; Intel iMac 20inch Core Duo Mac OS X (10.4.7)

Disk Utility offers following partition schemes:
GUID -> Intel Mac
Apple Partition Map (APM) -> PPC Mac
Master Boot Record (MBR) -> PC
My apology for referring APM as PPC in my previous post. Native partition scheme (GUID for Intel Mac and APM for PPC Mac) must be used in order to install Mac OS X in the partition as startup disk, it allows booting as well as firmware update. If partition must be shared between Intel Mac and PPC Mac, then only APM scheme can be used since both Mac platforms are able to access APM partition but only PPC Mac can boot from this type of partition.
Since I have only one Intel Mac and booting from external storage is necessary for maintenance (full defragmentation) and repair (in case when internal drive has crashed), I use only GUID scheme for iMac's internal drive and Firewire external drive. Super Duper is used to mirror exactly internal drive to external drive regularly. The only time I have to perform file transfer between PPC Mac and Intel Mac with external drive was during hardware upgrade as follows:
iBook G4 -> iMac G5 -> iMac CoreDuo -> iMac Core2Duo
Thus the decision for partition scheme of external drive depends on whether you have to boot Mac OS X from external drive (no in your case but highly recommeded for emergency plan) and whether sharing of external drive between your PowerBook G4 and iMac CoreDuo is desirable. I assume you will select APM scheme for your purpose since booting Mac OS X from external drive is not required.
Use of very old Master Boot Record (MBR) scheme will turn the external drive into PC drive completely. Unless this drive must be accessed in Windows environment as conventional PC drive for some PC disk utilities (these old utilities can't work with new GUID scheme), use of this non-native scheme for Mac OS X is not advisable.
Hopefully above information will help you in partitioning external drive. Since you do not have to preserve content of this external drive, why not go ahead and experiment with new partitions to see whether they serve your purpose ? Disk partitioning without writing zero or any random patterns on whole disk takes only few seconds. But it is a good idea to write zero (shortest time required) across whole disk surface to ensure that bad disk blocks are masked off to prevent future access and possible crash.
iMac Intel Core 2 Duo 2.16GHz / 1GB RAM / 250GB HD / 20" LCD Mac OS X (10.4.9) Firewire RAID, iPod nano

I need help finding this hp hard drive for dv6521eo

I need help finding this hp hard drive and memory for dv6521eo

Hi:
You can purchase any SATA II 2.5" notebook hard drive up to 500 GB in size.
Memory is PC2-6400.
Paul

Please help me, i need all driver HP ENVY m6-010dx support win 7 64 bit

please help me, i need all driver HP ENVY m6-010dx support win 7 64 bit.

Double post
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

PLEASE HELP ME, I NEED ALL DRIVER HP ENVY M6-K010DX SUPPORT WIN 7 64 BIT

please help me, i need all driver HP ENVY m6-k010dx support win 7 64 bit

Hi:
Try the W7 x64 drivers and software from this model which has the same processor.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6545...

I am very new to Mac Mini and need help transferring files to thumb drive

I want to transfer the Mac Mini user guide (manual) to my thumb drive but do not find how to do it. Help, please!

The thumb drive is on the desktop. This is the most embarrassing question I have had to ask in public in a long time, but, how do you drag something. When I try by holding down my mouse on the file name I want to move it doesn't drag it just gives me several other options. I left Microsoft for this and I know nothing about Apple computers except for my iPad.

Soundcard driver does not support DirectSound ?

Hi,
I just had to reinstall my OS, (Vista) Then I reinstalled AE CS3, now when I open AE I get a message saying that,
"The currently installed soundcard driver does not support DirectSound Input. Recording audio is not possible"
My soundcard is a 'High Definition Audio Device' made by Microsoft, it works fine and all the drivers are up to date.
Does anyone know anything about this problem or how to fix it ?
Thanks in advance.
J.

Well, what driver did it use before you re-installed? A standard MS HD Audio device doesn't mean anything. It would install that standard driver on a 10 year old computer, as it's more or less an emulation device. You will have to install the correct chipset specific driver, which probably merely requires a manual initialization of Windows Update with extended options. likewise you should be able to find out what audio device is in your system e.g. by using SiSoft Sandra to probe it...
Mylenium

Software Audigy 2 in DELL Computer Dimension 8

I lost my CDRom with the software to install my 5. dolby surroundsystem.
Were can i download this software.
For now i downloaded the audigy drivers first, so i have sound but no dolby.
w.regards,
Simon

Simon,
If the Audigy 2(OEM) came pre-installed from your Dell, the online driver might not work for you but you could always give it a try though. Go to the download page and look for "EAX 4.0 ADVANCED HD Driver Update for Creative Sound Blaster Audigy 2/Audigy 2 ZS". Download and install this driver. If everything is successfully installed, try searching for this file "ctpanel.exe". You can configure the sound card via this file. If the online driver doesn't work for you then it's best you contact Dell for those customized driver you might need.
Jason

Soundcard driver problem - Lenovo 3000 N500

I have a problem with the installation of a suitable driver for the soundcard of a Lenovo 3000 N500 under XP.
Initially there was no sounddevice displayed at all - After installing windows service-pack 3 the soundcard appeared as -
"audiogerät auf high-definition audio bus"
I downloaded and extracted all drivers from here - http://www-307.ibm.com/pc/support/site.wss/quickPath.do?sitestyle=lenovo&quickPathEntry=4233-5FG&ope...
Additionally installed "Intel HDMI Audio Driver"
Still no suitable driver and therefor no soundcard available.
I saw other posts with similar problems, but the solutions did not help me yet (f.e. Intel HDMI Audio Driver), but maybe instal has to be done in some very certain order.
I would be very greatful for any help!

As of today, status unchanged, no drivers available HERE. Unbelievable.
MOD EDIT - Long URL converted to link to fix break in forum formatting.
Message Edited by Mark_Lenovo on 11-12-2008 01:29 PM

Please help me choose an internal drive for black macbook

hi
i own a black macbook.
my current drive is FUJITSU MHY2250BH which came with the macbook.
I need a biggeer drive, the biggest possible, and I would like 7200rpm as i do alot of audio intensive work etc.
i found a 500gb fujitsu, but the dimensions are slightly diff to my current drive.
should i make sure the dimensions are exactly the same? eg to the millimetre??
i just want to know about what specs to watch out for.
i live in uk, so dont really want to buy from a usa retailer.
can anyone help?
thankyou
also, would i be able to use my current drive as an external drive? how could i plug it into macbook? an enclousre? or just a wire?
i also have a bootcamp partition currently.
would the new drive be a simple change over? ie. no need to reinstall any app or boot camp from scratch again? i think i read that we can just use a time machine back up to put my current macbook drive state onto the new drive.....right?

As of October 1, 2009 Toshiba is now handling Fujitsu Branded Drive support.
Check what they've got available in the way of notebook/laptop internal hard drives. I'm sure their 500GB 7200rpm internal HD will fit
SATA 3.0Gb/s (SATA-2)
Form Factor 2.5"
minimum cache of 8MB
http://sdd.toshiba.com/main.aspx?Path=StorageSolutions/PCNotebookHardDrives/MKxx 56GSYSeries
look at the MK5056GSY - obtained from a quick Google: http://www.itpro.co.uk/615283/toshiba-expands-2-5in-hdd-range-for-high-end-lapto ps
Message was edited by: myhighway

Help - Dell 8300 Dimension Soundcard driver

Similar Messages

Maybe you are looking for