HELP !!! desperate to find out what i am doing WRONG

I have been using A Prem cs4 and set up Encore to make dvd.
I have made 20 timelines within Encore. Is this OTT?
I am sucking the memory out of my computer and so I can't get audio on some items with project.
I have 2 hard drives to store footage and projects but the main computer is jammed I am 804 kb.
I am desperate to finish this project.
It is a school concert with 18 items.
I have 6 submenus
1 main menu.
what am i doing so wrong???
How can i get my memory back.PLEASE put me back on track.

thanks,
I guess i should explain the whole problem...
but you see ...
It was going well,... ran low on memory...
I cleaned and removed the rendering files,(i had been rendering all through A Pro..)
made dvd...great... a 3 second bit of footage not in place, so fixed it in A Pro... I think I reverted to original and it fixed/updated..
memory LOW again...
transfered cache to external harddrive..
back to square one with no memory..
And Encore has sound on 3/4 of my items/timelines, but not on others..
When I made disc earlier today it took 4 hours to create. (do you know where these files are??? Maybe I can delete them, to start fresh.
Should it take that long for an hour and a half dvd??
Once it is burn and some have no sound, i have to start again...
Back to square 1..
no space to work the project...
where are temp files stored for Encore???
now because i can't find any files to move over to external drive the memory is being sucked up.
Is it virtual memory?
Is it Encore memory?
is it Adobe Prem memory( hiding somewhere)
Automatic saves are directed to external hard drive???
why is it getting sucked up and can I sort it before I can't turn on my computer again...)
this has happened 3 times.
Yesterday i took 20 minutes to see the screen??
Does this make any sense???
xp sevice pack 3
2.4GHz
3.50GB RAM
300 hard drive
2 external drives: 500GB and 500GB

Similar Messages

  • Help....I am trying to set up iClould on my pc....the set up was complete....when I try to sign in to set up it says the Apple ID is valid but is not an iCloud account.  Please help me and tell me what I am doing wrong.

    Help....I am trying to set up iClould on my pc....the set up was complete....when I try to sign in to set up it says the Apple ID is valid but is not an iCloud account.  Please help me and tell me what I am doing wrong. Thx

    Hi DesCoop,
    You must initiallly activate iCloud from an IOS device or a Mac. You cannot inititally activated from a PC.
    Sorry.
    GB

  • Can't figure out what I'm doing wrong

    I'm using Studio 8 in Mac OS X (10.4.6). I've got some pdfs
    uploaded to my site that are accessible through links one one of
    the pages. I had to make changes to the pdfs and resave them. I
    thought I uploaded them, but when I test the links it downloads the
    old version and I can't figure out what I'm doing wrong. Here's
    what I did.
    This may be a dumb way to do things, but I saved the new
    version and then dragged into the server file in
    user-->Library-->Application
    Support-->Macromedia-->Dreamweaver
    8-->Configuration-->ServerConnections-->unnamed
    server-->public_html (this is where all the other files are).
    When I go back into Dreamweaver and open the pdf listed in the
    Files window on the right (by control-clicking and selecting Open
    with-->Acrobat) the correct version appears. I thought maybe
    there was a delay or something, but I've waited and still the old
    version is what you get from the site.
    Is there an easier way to do this, or is something wrong
    maybe? Many thanks in advance.

    > This may be a dumb way to do things, but I saved the new
    version and then
    > dragged into the server file in
    user-->Library-->Application
    > Support-->Macromedia-->Dreamweaver
    Put the files in this Site's Local Site Folder.
    If unsure of where you've specified this to be, look in this
    site definition
    (dw menu-->Sites-->Manage or Edit Sites)
    If that path you've given above above is correct, it's
    wrong....

  • TS1368 Have downloaded the latest version of ITunes and now i get "Incompatable Application" I tunes will no longer open. have worked my way through FAQ and help to no avail. What am i doing wrong? currently running windows 7.

    Have downloaded the latest version of ITunes and now i get "Incompatable Application" I tunes will no longer open. have worked my way through FAQ and help to no avail. What am i doing wrong? currently running windows 7.

    Have downloaded the latest version of ITunes and now i get "Incompatable Application" I tunes will no longer open. have worked my way through FAQ and help to no avail. What am i doing wrong? currently running windows 7.

  • How do I find out what I'm doing in a package ? v$sql ? etc.

    I'm running Linux and trying to find out at what point a process is at.
    It is running a procedure in a package, lets say. Package_main.main(). If I join v$session to any of v$sql,v$sqlarea,v$sqltext all I get is the sql text relating to the "package_main.main()" call. I want to find out what point in the PL/SQL statck the execution is : what view should I be looking at ?
    johnnie d

    I believe the problem you are describing has been identified as a design feature for 10g+. I have not spent any time looking at the issue.
    If you do not need immediate access but want to see what a session was doing you might be able to turn on sql trace for an active session and then review the trace file after you have allowed the trace to run long enough to capture what SQL is being executed.
    Being that all SQL would have a child cursor there should be a way to tie sql from within pl/sql being executed to the session executing the stored code. I just have not looked into this. Maybe someone else has.
    HTH -- Mark D Powell --

  • An mp3 file on my computer will not import to itunes by either the drag-and-drop or the Add File to Library method.  Can't figure out what I'm doing wrong.  My OS is Windows 7.

    I purchased an mp3 from a private website on my laptop.  The itunes library i sync ipod to is on my desktop, so i copied the mp3 onto a flash drive and then into my desktop in the Downloads folder and Desktop folder as well as the itunes music folder, 3 places.  I opened itunes on the desktop and read the instructions for importing music that's already in my computer.  Neither the drag-and-drop or the Add File to Library method works.  I've tried both ways over and over.  Cannot figure out what the problem is.  I do note that the name of the mp3 file doesn't show the .mp3 extension, it appears as simply it's title, Eating Healthy, without any extension at all.  Could the filename be the problem, or do you have any other idea what I'm doing wrong?  My OS is Windows 7, using IE9.  Thanks.
    ADDENDUM AFTER READING ANOTHER DISCUSSION HERE:  I have now tried right clicking the song in Windows Explorer and choosing Open With, clicking itunes.  The mp3 plays in itunes but does not add to the library.

    I don't have a Recently Added playlist.  However, I discovered that the file I had named Eating Healthy was given the name You Can Enjoy Eating Healthy when it copied to iTunes.  I'm guessing iTunes pulled the full name of the piece from the internet.  Upshot--the mp3 did transfer to iTunes on all 3 tries, but I was looking in my alphabetized list under E, not Y, so I didn't see it there.  Thanks for your help. 

  • I need help can i find out what device request a password reset.

    I dont check my email very often and when i did i had a email from apple saying how do i rest my password. they sent it to me on 8/15/13 at 2:30pm. also i went to my icloud account and noticed i only have 1 ipod and my sons iphone registered. i did have 2 ipods and my sons iphone. so i need some help finding out if i can get that email tracked back to the device. Also i had another email from 7/9/13.
    Your Apple ID,  was just used to download Paper Run from the App Store on a computer or device that had not previously been associated with that Apple ID. You may also be receiving this email if you reset your password since your last purchase. that is what the 2nd email said. so now i am worried. if anyone can help lead me in the right derection. thank you

    I do not think you can find out on what device the purchases was made.
    I would change the password for your account.
    You can also contact iTunes and see what they can do
    Apple - Support - iTunes - Contact Us

  • Where/how can i find out what this is doing

    I know this old but not concerned with that, just what is it doing,  this is java script in an .asp that loads
    a flash application, I'm most concerned/interested
    why it references a clsid?
    what is the code base all about? (is this embedding code in the browser? it does the embed everytime the app is loaded?)
    what is the PLUGINSPAGE?
    how does all this affect the opertion of the flash apps that run after this initializtion?
    this is kinda/somewhat/ normal for anytime /anyone running a flash app?
    It seems there's a lot going here, if too much to answer please just point me somewhere where i can RTFM, but
    please make it a good RTFM not a FWOT!!!
    flName = "default-app.swf"
    document.write('<OBJECT'
             + ' CLASSID=clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"'
             + ' CODEBASE=":http//download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0 ,79,0"'
             + ' ID="flash"'
             + ' WIDTH=' + flWidth
             + ' HEIGHT=' + flHeight + '>'
             + '<PARAM NAME=movie VALUE="' + flName + cookString + '">'
             + '<PARAM NAME=menu VALUE="false">'
             + '<PARAM NAME=quality VALUE=high>'
              etc more params
             finally
             + ' TYPE="application/x-shockwave-flash"'
             + ' PLUGINSPAGE="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash">'
             + '</EMBED></OBJECT>'

    that's standard flash embedding code with variable swf name, width and height.

  • I have tried to load iTunes Match onto my computer but it tells me I have reached my 5 limit. I do not have 5 items however I did have one of them stolen. Please can anyone help me to find out what is being counted as my 5

    Please can you help me?
    I have tried to load iTunes Match onto my mac Pro but it tells me I have reached my 5 limit. I do not have 5 items with iTunes match on them so I am confused.
    I have two iMacs a phone and iPod and want to put match onto my pro. Is there anywhere I can go to see which items are actually on there?
    We had a burglary last year and did have an iMac taken is it possible I can see if that is one of the 5 and if so how and where do I look and how can I remove it?
    I will be so grateful if anyone can please help me.
    Many thanks Helen

    In your Itunes account.

  • I think I have the last update for iPhoto, lately its been crashing and do not open. It doesn't give enough time to go on the " Help " section to find out what is goin on.

    My iPhoto crashed after I was trying to upload some fotos. It never finished the upload and it frozed, then it crashed. Now every time I open it, it opens on some of the last pics i tryed to upload then it crashes. What can I do?

    What system version are you running and what iPhoto version do you have?  As a test  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. Does it?
    OT

  • Question:  I can't figure out what I'm doing wrong and would so appreciate help.

    I really need help! I took on a project to produce free of charge an online publication for a non-profit nature club as they could not get anyone else. My background is in communications but not at the design or layout level. I bought InDesign and a how-to book and the first issue turned out quite well. However, I have run into a problem with this second issue that I can't get past and it has to do with the cover. I have a colour that works perfectly with the seasonal masthead and the cover photo and I want to apply it as the background for the cover page. I want the text box with the highlights of what's in the issue to appear on top of this background. I have tried two different ways to make this happen.
    1. I made a text box to cover the entire space and applied the colour swatch. I already had the cover photo in place. Then I tried to add a text box so I could list the highlights. I couldn't type in it.
    2. I went back to scratch and  created the text box with the highlights. However, I don't see any way of applying the colour as the background  below the masthead.
    I have no idea how I got this to work with the first issue that I did in the spring, as you'll see from the second image attached.
    Does this have to do with layers?
    Thanks,
    Karen

    Thanks, Peter and tman69. I'm not quite there yet. The background colour is now in place and my image appears as it should be. However, something has happened to my text boxes. It looks like the text has disappeared, but when I extend the boxes, I see the words are pushed way below. How do I bring them back up? They still remain down at the bottom when I try extending the boxes.
    K

  • [unsolved] BCache issues - Can't figure out what I'm doing wrong

    My setup is as follows:
    SSD on /dev/sda
    HDD on /dev/sdb
    I'm doing a EFI setup, so basically I need nothing more that an ESP and ROOT partition on /dev/sdb. I don't mind too much if the ESP partition is cached, but I suspect that could cause problems.
    There's really no need to cache ESP, so my approach have been to only cache the root partition:
    make-bcache -B /dev/sdb2 -C /dev/sda
    Which seem to work.
    After this everything seems to go wrong. I've tried several different approached and following the arch, gentoo and the official guide, but regardless I continually stumble.
    Following the arch guide: https://wiki.archlinux.org/index.php/Bcache I run in to trouble already at step 3.
    for i in /dev/sd*; do echo $i; echo $i > /sys/fs/bcache/register_quiet; done
    But as I understand it, the fact that I can't write to register_quiet just mean that I don't need to. Well, that doesn't sound very sensible.
    Apparently I can skip step 4., but even so I've tried different approaches as I said. However, no matter what I do, I end up missing /dev/bcache0, /sys/block/bcache0 or something similar, thus preventing me from continuing.
    At this point I have no other options than to ask a few question here, and maybe get some advice.
    1. In the case described, does sdb need to become backing device, or is it sensible to only make sdb2 (root) the backing device? [probably solved]
    2. Assuming that sdb need to become the backing device, will EFI boot even be possible? [solved]
    3. is btrfs a necessity, or is any file system in theory viable? [Suspect I don't need to use btrfs]
    4. Whatever questions you may think I've left out. [still have issues]
    Thanks and best regards.
    Last edited by zacariaz (2013-08-19 15:15:12)

    Just a small update.
    I think I did it mostly right on the last try, however, I couldn't boot:
    Attempting to register /dev/sda with bcache
    ash: write error: Invalid argument
    Attempting to register /dev/sdb with bcache
    ash: write error: Invalid argument
    Attempting to register /dev/sdb1 with bcache
    ash: write error: Invalid argument
    Attempting to register /dev/sdb2 with bcache
    ash: write error: Invalid argument
    Waiting 10 seconds for device /dev/bcache0 ...
    ERROR: device '/dev/bcache0' not found. Skipping fsck
    ERROR: Unable to find root device '/dev/bcache0'.
    The only thing that comes to mind it that I made two boot entries with gummiboot, as I wasn't sure if I should define sdb2 or bcache0 as the root partition, but if that was the issue, I should at least get a boot menu I would think.
    So that's how it is right now. I haven't got a clue what might be wrong.
    Best regards.

  • Lord and baby Jeebus, I can't figure out what I'm doing wrong.

    Hello friends,
    I stand before you, hat in hand, to admit to you todat that I cannot properly configure a simple home LAN. I am ashamed. I have already revoked my own man card.
    Here's the skinny:
    1. PIII HP laptop rockin' WinME
    (Pause for laughter)
    2. Dual G5 1.8 running 10.3.9
    3. Linksys Wi Fi Router
    4. Epson Photo Stylus 1280 connected via USB to the G5
    5. Both computers are members of the WORKGROUP workgroup
    There are three main problems I'm having:
    -- First and foremost my printer does not appear in My Network Places or the Add Printer Wizard on the WinME laptop (but the Mac itself does). This is crucial, as my wife needs it for her school.
    -- Second, I can access the Mac from the WinME laptop but not vice versa. Initially I was able to do it, but now I get the "Alias has been moved" error.
    -- Third: Alcohol -- even in small doses -- severely inhibits my ability to play Prince of Persia. I'm not sure that you guys could help me with this one.
    Other than that, everything's jus' peachy. Thanks a million.

    placate - To allay the anger of, especially by making concessions; appease. See Synonyms at pacify.
    I don't really follow you on "placate." I think "imprecate" may be more appropriate. In either case, I'm not blaspheming your Lord and savior. I am merely an idiot with bad judgement.
    Since I'm pleading ignorance on a help forum, I paraphrased a Homer Simpson quote to highlight my own smoldering ignorance via parallel irony. He's dumb, I'm dumb and together we form a very stupid Voltron with limited cognative capacity.
    If my rationale didn't make you comfortable, I'll go a step further and change the name of the topic. My only lament is that it may make even less sense now. See the subject line above.
    If we can that episode is behind us, than I'd still like some help with this shared printer issue. Afterward we can find some other non-Abrahamic diety to disparrage -- Zeus perhaps? I don't think I've ever had anyone complain to me about a Zeus joke.

  • I can't seem to figure out what I am doing wrong any suggestions?

    I will admit right off that I am a newb. I have done some programming with C++ but I have just started with JAVA.
    here is the problem. I am writing a program for a course I am in and I have it basically put together but no matter what I do I cant seem to figure out the correct input command to retrieve keystrokes.
    I will post the source code and then the error from netbeans 4.1 debug report:
    package assignment_one;
    import java.io.*;
    import java.util.*;
    /* @author Justin Jackson
    * a program to calculate total gross earnings
    * for one week*/
    public class Main {
    public Main() {
    public static void main(String[] args) {
    InputStreamReader charReader = new
    InputStreamReader(System.in);
    BufferedReader keyboard=new
    BufferedReader(charReader);
    int i; //test to see if loop or end
    int iBasePay; //base pay rate
    int iTotRegHr; //total hours up to 40
    int iTotOtHr; //total hours over 40
    float fTotPay; //total pay
    float fOtRate; //calculated overtime rate
    System.out.println("To calculate a paycheck, please press 1");
    System.out.println("To exit, please press 2");
    i = keyboard.read();
    if (i == 1){
    System.out.println("Please enter the base pay: ");
    iBasePay = keyboard.read();
    System.out.println("Thank you.");
    System.out.println("Please enter the total hours up to 40: ");
    iTotRegHr =keyboard.read();
    System.out.println("Thank you.");
    System.out.println("Please enter any hours over 40: ");
    iTotOtHr = keyboard.read();
    System.out.println("Thank you.");
    fOtRate = (iBasePay * 1.5f);
    fTotPay = (iBasePay * iTotRegHr) + (iTotOtHr * fOtRate);
    System.out.print("The total wage is: " + fTotPay);
    if (i == 2){
    System.out.println("Thank you for using this program ... Goodbye.");
    else {
    System.out.println("I am sorry, that is not a valid option");
    error report:
    init:
    deps-jar:
    Compiling 1 source file to /home/justin/Assignment_One/build/classes
    /home/justin/Assignment_One/src/assignment_one/Main.java:32: unreported exception java.io.IOException; must be caught or declared to be thrown
    i = keyboard.read();
    /home/justin/Assignment_One/src/assignment_one/Main.java:36: unreported exception java.io.IOException; must be caught or declared to be thrown
    iBasePay = keyboard.read();
    /home/justin/Assignment_One/src/assignment_one/Main.java:39: unreported exception java.io.IOException; must be caught or declared to be thrown
    iTotRegHr =keyboard.read();
    /home/justin/Assignment_One/src/assignment_one/Main.java:42: unreported exception java.io.IOException; must be caught or declared to be thrown
    iTotOtHr = keyboard.read();
    4 errors
    BUILD FAILED (total time: 1 second)

    Just like the message says you need to
    1) Declare it to be thrown or
    2) Catch java.io.IOException.
    For case one add throws java.io.IOException to your main:
    public static void main(String[] args) throws java.io.IOException {For case two put your code inside of
    public static void main(String[] args) {
      try {
         //your code here
       } catch (java.io.IOException ex) {
          ex.printStackTrace();
    }

  • When trying to update my 3Gs phone with the new ios5 software, it will download the software but then i get a message saying connection time has timed out. what am i doing wrong? i checked my network, its fine

    When i try to update my iphone with the new software, it will give me a message that says connection time timed out, and then it says some other little things about a network not having a connection. i checked all of that and it is all fine. Im not sure why it is not working. i even restarted my laptop, all of my stuff is up to date. Does any one have any sollutions or any advice? Please and thank you!

    This is asked and answered mnay times every day.  The forum search abr is on the right side of this page.
    Disable your firewall/security software.

Maybe you are looking for