Help desperately needed. DVD project won't complete burn...

Hi, firstly I am really not great at the whole computer thing so simple English and basic direction would be an enormous help!
I have a DVD project which totals over 7GB in memory so I am trying to burn a dual layer disc.
I initially got the "hardware error 37303" message. I looked online, it advised downloading Microsoft Fix and ASPI, I did so and this message is no longer appearing. However...
The project now gets to 273.81MB of the writing capacity and just stops, it's done this 5 or 6 times now. I have tried burning to 3 discs without sucess, I have tried burning an DVD image a DVD folder...still nothing, simply the message says "writing files. failed completed"
This is driving me absolutely crazy! I need this burned asap so your kind help would be hugely appreciated

Mylenium wrote:
Does the Check Project throw any warnings? Not even folders or images being created would point to something more serious. Also try a manual transcode and menu render before initializing the build. It may either resolve the issue or at least give a more meaningful error.
Mylenium
Thanks for that.
In response to your questions, there are no project errors and I have rendered the full project. The preview is also absolutely fine.
How do I manually transcode? When I bring down the file menu the transcode options are greyed out so I am unable to click on them.
The DVD has three menus, 12 separate video files, all accompanied by audio. The size of the complete project is around 7.5GB and on every attempt to burn it gets to the burn process, says it will take about 45 minutes, burns 273.81 MB then ejects the disc saying "completed failed" It's driving me absolutely nuts!!
I would really appreciate if you could suggest a solution as I need to have this project on DVD asap and need 6 copies...
Thanks for your response.

Similar Messages

Latest dvd project won't play in DVD players...

I have a iMac G5 and iDVD 4. I use FCP to edit. I have made many DVDs from files I make with exporting my sequences to quicktime. Then I import that export into iDVD, and this has always created DVDs that play in my computer and in DVD players.
For some reason, my latest project will only make DVDs that play on my computer using this method, not any of my 3 DVD players. I've checked to make sure I'm still set to NTSC, and I am. What could be causing this? Did I change a setting in FCP that I'm unaware of?
Any help would be greatly appreciated as I've wasted a good many blank DVDs from this glitch. Thank you!

Haha. I would love the luxury to just stop and not worry about it but unforunately I need to burn the DVD. I do not have another burner, I only have my internal one built into the iMac G5 I have.
Plus if you read through, you'd see that I have successfully burned older DVD projects just fine this week. It's just this latest project that won't burn.
If you have any suggestions related to what I might have changed or what might be different in FCP, that would be helpful. Unfortunately just stopped after 10 bucks worth is not an option.

Outlook 2007 backup help desperately needed

I am moving in less than a week and I desperately need to back up my Outlook to an external drive because my desktop computer
is going on the moving van. I added the Outlook backup add-in today, but it is not working. I have it set (under options) to save to K:\Outlook\outlook backup.pst When I exit Outlook, I get this message: The J:\Outlook\folder does not exist. The file might
have been moved or deleted. Do you want to create it?
How can I get it to stop looking for a J drive? I don't have anything in my J drive, so even if I choose yes to create it, it is unable
to create the Outlook folder and the system cannot find the path specified.
Steps I have tried so far, which have failed:
1. Reboot the computer
2. Disable and re-enable add-ins
3. Delete and re-install the add-in
4. Try saving to a different external drive

Hi,
Change the backup location of a personal folder to any other drive apart from J:\drive as it doesn’t exist in your computer.
To change the backup location of a personal folder file:-
1. On the File menu, click Backup.
2. Click Options.
3. In the Backup these personal folders files list, click the file you want to change the backup location for, and then change the location in
the Backup the file selected above to this location box.
4. Click OK.
5. Click Save Backup.
I hope the information is helpful.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

IMovie 3.0.3 and iDVD suddenly won't complete burning

I'm desperate for help. I'm using iMovie 3.0.3 and iDVD to import all of my cherished home movie from miniDV to burn it all on DVD. The first three went fine, but now I can't burn any more dvds through iDVD. The progress bar gets stuck at a significant chunk of time left, and refuses to finish the burn. I have to cancel the application everytime now. Do you think it's a software problem - that I should upgrade my operating software and upgrade to iLife or does it sound like a hardware problem?

This is helpful for the dvd's that I've already burned, but the problem is that I can't continue burning any dvds from new video I have imported into iMovie. I'm not making multiple copies of one dvd - I'm importing footage from a series of hour-long minidv tapes. So each tape is one dvd. I've done three tapes (and three dvds) and now the process is stopping halfway through the burning process of a new iMovie.

Need Help Desperately!! Trash won't empty!

Hi
I've had this problem for over a month now and I've just sat here for about an hour trying to fix it.
I've got a .html file in the trash and I just can't get rid of it. It's called: Tiếng Việt.html (which in itself looks suspicious to me).
Anyway, when you try to find info on the file, it just says "fetching" and never actually tells you anything. I've also tried opening it in Safari for info and Dreamweaver but get error messages.
I've tried emptying the trash normally and secure empty trash, but nothing.
Then, as a last resort I went to Terminal. Now normally I don't like to use terminal because I once deleted all the files off my desktop by using it!! Lucky I didn't make a bigger mistake though.
I know I typed the command properly this time though, because I got a message saying "command completed" or something along those lines. But no, it was still there.
So, I did it as follows and this was the result I got:
Last login: Sun Sep 10 10:39:25 on ttyp1
Welcome to Darwin!
You have new mail.
[Macintosh:~] caroline% sudo -s
Password:
[Macintosh:~] root# rm -R /Users/caroline/.Trash/untitled\ folder/
rm: /Users/caroline/.Trash/untitled folder//Legal.localized/Tiếng Việt.html: No such file or directory
rm: /Users/caroline/.Trash/untitled folder//Legal.localized: Directory not empty
rm: /Users/caroline/.Trash/untitled folder/: Directory not empty
[Macintosh:~] root# exit
exit
[Macintosh:~] caroline%
What's confusing me is that it says "no such file or directory" and then "Directory not empty".
I've tried changing it's permission with 3rd party program's and am often given another error message!
I'm worried it's spyware (if it actually exists for a mac!) or something equally sinister. Is it worth doing a virus check?
I've even resored disk permissions...anything else I should try?

Hi
I'm worried it's spywareNo, this is a known problem with certain special characters in filenames. I won't go into tedious detail, since it seems Apple may have fixed it.
Someone else with this problem manage to cure it by running Repair Disk from the Install disk and then using Secure Empty Trash. I don't know that the "Secure" made any difference, it is the disk repair that counts. If it doesn't work after trying Disk Utility, run fsck instead:
Mac OS X: About Using Disk Utility and fsck for File System Maintenance
Let us know if this helps!

TS1717 Since upgrading my ipad to os7 I can no longer get my ipad to load up my music from iTunes. Same with my ipod. I have an iMac OS 10.5.8 Help desperately needed please

Can anyone help please.? Since upgrading my Ipad to OS 7 I can longer access my music on iTunes. iTunes says upgrade to version 11.1 but my IMac will not allow this. My Ipod won't upload either. Help!

You need to buy a Mac OS X 10.6 DVD, install it, and run the 10.6.8 combo updater. Mac OS X 10.6 requires a Mac with an Intel CPU and at least 1GB of RAM.
(94902)

Locked out of iphone 5s. Help desperately needed.

Have locked myself out of my iphone (5s), can't remember my password and it wont let me use my fingerprint. Have tried to restore it but the problem is it requires me to turn icloud off and to do that I need to type my password in. I also followed some silly advice and have deleted the find my iphone from my mac so that won't help it. It's very new and am panicking a lot, please please elp!

Google "iPhone recovery mode".

DVD project won't burn

I'm using iDVD v.4 and a LaCie burner. I've created a small slideshow project using photographs from iPhoto. When I try to burn the disc, the window changes to the iDVD icon for about 3 seconds and then returns to the project window. Nothing else happens. Any ideas?

Hi Michael:
Yes, I have an idea but you may not like it ;(
iDVD4 does not natively support external DVD burners. You will need this patch in order to send you movie to the burner.
Oh well, at least it is free!
Sue

Help Desperately Needed to restore Photoshop 10 catalog to Windows 8 computer and PSE 11

I am trying to backup my Photoshop Elements 10 catalog from my old computer running Windows 7 and restore to my new computer running Windows 8 and Photoshop Elements 11. I reconnected missing files, optimized and repaired the catalog, then repaired and re-indexed visual similarity date. I backed up to the hard drive on the old computer, copied the files to the external hard drive, copies the files from the external hard drive to the desktop of the new computer. From there I opened PSE 11 organizer and tried to restore. When the restore is almost complete I get the following error: "error encountered while restoring. It's recommended that you contact the disc drive manufacturer and upgrade to the latest available firmware for your specific disc drive before trying again.". I also had disabled the virus protection on both computers. I have contacted the external hard drive manufacturer and they are confident the problem is not with the external hard drive. I have spent countless hours on chat with Adobe Technical Chat. I have done everything that has been suggested to fix the problem and I still get the same error message. They referred me to their 800 number for paid technical support and I was on hold for a total of 4 1/2 hours and after being trransferred several times no one came back on the line to help. I have an open case with them and they still have not returned my calls. I even tried using the same backup catalog file and restored to another PC running Windows 7 (and Elements 10) and it worked. Why can't I restore the catalog to Windows 8? Any help is greatly appreciated!

Please refer to following link:-
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catal og-photoshop.html

Please help, desperately need to get iTunes back on my computer

Hello all, I will make this as short as possible.
I just installed a new, larger and faster HD on my Dell Inspiron 5150. It is the same brand as the other and is working fine. I use backup software and retored my HD to the same condition that it was in before the change. I started iTunes and retrieved my Podcasts and even loaded a CD on it. I was in the process of backing up the HD and I wanted to load the podcasts and CD onto my iPod. It would not connect to iTunes no matter what I did. I stopped the backup and it still would not connect.
I decided to re-install iTunes, went to the Apple site, downloaded the program and it would not install over the old version. I then deleted the older version using add/remove programs and tried to install. When I click on <<Run>>, I get a flash on the screen of Quicktime and then nothing. I then deleted Quicktime from the HD and the same thing kept happening.
I came here and saw a post about Norton so I disabled that and again the same. Then I saw a post about installing Quicktime first, same result. I can see <<quicktime>> and a progression bar for only an instant each time. I am rebooting between all these tries by the way.
Can anyone PLEASE help me to get my iTunes back. I do not have a disc. Can I buy one at Best Buy?? Everything is running fine but it just will not begin the installation.
If there is a solution on this board already, please point me to it. I need iTunes, I don't think I can function without it?? what could have gone wrong??? Again Please, PLEASE help me out.
Thanks so much in advance. I will keep searching for answers in the meantime.
Mike (PLEASE HELP)

If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Design Help Desperately Needed

Hi everyone, Im still here waiting for someone to help me out. Im really desperate, keeping my job depends on getting this right.
My main web page is here www.domesticcontractprofessionals.ca to give you an idea of what Im asking help for.
...In the header file there are several pics. Beside the pics there are scroll over buttons. Id like the first button, that says domestic contract, open when the page loads. Thats all, I just need to to be open until someone scrolls over the other.
Thanks so much for whoever helps me out here. You have no idea how grateful I am.
File can be found here...
http://uploading.com/files/cab78emc/header_v8.fla/
Im a beginner so please walk me through this one if you can. Much appreciated.

The easiest thing I can tell you is to publish your flash
with an html page and then either copy the code from that page and
paste it into your html page or modify the page created by flash.
What’s happening is if you use the “insert flash
object” button in dreamweaver it is using an older embed code
without the parameters that links the AC_RunActiveContent.js that
your flash piece is apparently looking for (I’m guessing
it’s created in CS3).
Hope that helps.

Help Desperately Needed!!

Hello,
I have tried bringing my issue into the Adobe DPS Forum previously but have yet to recieve any kind of response. I have also phoned the Adobe helpline, but again cannot get through.
The issue I am having is within the DPS App builder. I have developed and finished my folio and have now 'created the app'. I have set up all my licenses from Apple, as well as purchasing (my now second) Adobe Single Edition license.
After I have added all the relevant details to the app builder, it doesn't let me download either the .ipa or .zip file, instead showing me the error message 'Sign in Failed, please try again'
After doing my own research online, I found that I needed to remove all symbols or hypenations from the article titles/names. I have done this. Triple checked. Re-published the folio. Completed the entire process again - but still to no avail.
As stated above, I have now purchased my second DPS Single Edition license and neither of them have worked. I really need this issue to be rectified so would appreciate a response as quickly as possible.
Thanks,
Simon

Make sure your article/folio names does not contain any special characters. We were able to fix the "Sign in, please try again" error by removing all special charatcers in the folio/article names. Example of special characters are"&" "ö" "á" "()" etc
       Login to your dashboard (https://digitalpublishing.acrobat.com/welcome.html) and open the folio
       Click on the “List view” button to reveal the article names
       Change the articles names that contains any special characters as mentioned above
       Un-publish and Re-publish your folio
       Download the corrected folio and re-built your app, you should be able to download fine
or PM me your login details for the dashboard and I can take a look at your articles names for you.

Help desperately needed RE: tables. Anyone help! (CS3)

Hi,
I have recently inherited an indesign document at work which I have to edit. I have added a link to a screen grab of the document.
http://i303.photobucket.com/albums/nn149/Jaybeedubya/Picture3.png
As you can see each page of this document is made up with tables...the page you see is currently the last page (I have removed the copy from the table)
What I need to do is add more peoples details and photos into the document on various pages (so everyone will shift down 1 row each time....My problem is that I have no idea how they made the table so that it has the 2 different sized rows (there is a small row to seperate each photo- how is that created?. Also I cannot figure out how to shift all the peoples details down one so that I can fit in a new person. I cannot seem to extend the table so that it continues onto the new pages.
How should I go about doing this - Ive asked 2 contacts who 'know' indesign and they have no clue.
Help, im getting desperate!
Thank you.

Breathe.
Then, (a) click on the red squared plus sign to 'load' your cursor with text. (b) Move over to the top of the next page, near the place where you want to start the new text block. (c) Click, release. The page fills with the continuing story, containing the table.
Next, inserting rows. (Remember,
i breathe
Put the text cursor anywhere inside the table -- just above or below the place where you want to insert a row is good. Then select the Table menu, then Insert, then Row. Enter "2" for the number of rows, and select either Above or Below (depending on where your cursor was). OK'ing this puts 2 new rows into the table, with the same height as the one you were standing on.
Next, making them rows big and/or small. (Still remembering to breathe, are you?)
Move the mouse right over the left of the table, on the row you want to resize -- the cursor should change into a big fat right pointing angle. Now click, and the entire row is selected. Go to the Table menu, choose Cell Options (sorry -- I didn't make that one up), then choose Rows and Columns. In the dialog that appears, you can set the row height -- an "At least" value or -- probably used here -- an "Exactly" value; never mind that 'maximum'. How do you know what value to enter? Simply select a 'good' row and do the same to see what's there.

Help desperately needed - missing SMS icon - have tried EVERYTHING!

Hello
Thank you for taking the time to read this.
For no apparent reason, about a week ago the SMS icon on my BlackBerry Curve 8900 completely disappeared. In addition, now when my phone boots up, a message appears stating ’Uncaught exception: java.lang.NullPointerException’
I have tried finding a solution online, and have attempted to do all the suggested fixes including:
- Pulling the battery out while phone is still on, and then reinserting
- Using the ‘Show All’ option
- Changing Themes
- Choosing to SEPARATE in Messages options
I can view some of my SMS messages by : Messages folder > View Folders > SMS Messages However, many of my recent SMS messages are missing from here. And when I send test SMS messages to that device from another phone, not all of them are received! In addition – and MORE IMPORTANTLY (to me) – when I try to view my saved SMS messages by : Messages folder > View Folders > Saved Messages only about 10 saved messages appear; when in fact there should be nearer 100!
Without getting too sentimental, many of my saved SMS messages were from people who are unfortunately no longer in my life, and I want to be able to read them again. I could not bear for them to be lost forever. I really hope someone can help me with this.
Thanks so much in advance for any help or advice you can offer – very gratefully received.

The only way to get your SMS icon back is to reload your OS using BlackBerry Desktop Software. I can't guarantee you'll get all your messages back but at least you'll have the icon from which to view your messages.
To reload your OS, plug your phone in to your PC and open BlackBerry Desktop Software. Once your phone has connected to the software, click Device at the top of the software then click Backup and Restore. Do a data backup. When the backup has been done, follow the same path I suggested but this time at Backup and Restore click Restore and load the backup file you just created. This will restore your SMS icon.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Help desperately needed w/ Spry/XML thing

I am in dire need of help. I altered the products demo from
the Spry download and am am creating a gallery type thing where you
click on an item in the list, and the image changes. I have that
working fine. I then created a forward and backward button so you
could scroll through the images that way. And that works fine.
However, even though the image changes, I can't figure out how to
get the proper item highlighted in the left navigation.
For example, if I start on the first item (Atari Lucasfilm)
and click my forward arrow, the image will change to the Adobe
picture, but the navigation on the left still has Atari Lucasfilm
highlighted.
Here is a link to the website
http://www.3hounddesign.com/Paul_Woods/identity.html#
Here is a link to the xml
http://www.3hounddesign.com/Paul_Woods/identity.xml
And here is a link to the javascript
http://www.3hounddesign.com/Paul_Woods/gallery.js
Any help at all would be greatly appreciated.

The only reason I have the gallery.js included at all is
because I am a massive javascript novice who has no idea how to
create a button that would go to the next/previous image. Therefore
I went to the gallery demo and pretty much copied the
<a href="#" onclick="StopSlideShow();
AdvanceToNextImage();" title="Next">
I figured I would need to attach the javascript file that
went with the gallery demo in order to make that work. I'm not sure
what errors it created. I used Firebug, but couldn't quite figure
it out.
If there is an easier way to create a forward button that
would advance to the next image AND have the proper item
highlighted in the left navigation, please please please let me
know. Like I said, I am not very familiar with javascript, and am
on a deadline and trying really hard to figure out a bunch of stuff
and pretty much knocking my head against the wall.
Thank you for your help!
Once again, here is the website
http://www.3hounddesign.com/Paul_Woods/identity.html#
Here is a link to the website
http://www.3hounddesign.com/Paul_Woods/identity.html#
Here is a link to the xml
http://www.3hounddesign.com/Paul_Woods/identity.xml
And here is a link to the javascript (which is probably not
what I should be using)
http://www.3hounddesign.com/Paul_Woods/gallery.js

Help desperately needed. DVD project won't complete burn...

Similar Messages

Maybe you are looking for