Help desperately really needed please

Im using front page and im trying to put a macromedia flash player into my webpage so when people click on it it will give them the allow or deny box for their webcam how can i do this? html code i cant seem to find only for movies nothing to enable webcam
anyone able to help me PLEASE

Welcome to Apple Discussions!
So the songs are not on your computer?
Either way, to start off, make sure everything is up to date...
iTunes
iPod Updater
Updating iPod's Software
btabz

Similar Messages

HT201269 I forgot my password for Encrypt my Backup how can I reset that please help I really need it Urgently???

I forgot my password for Encrypt my Backup how can I reset that please help I really need it Urgently?

If you do not know the passcode then you cannot use the backup
Sorry

I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

I am using InDesign CS5. I have a body of text which is ranged left with tabbed indents. My client now wants the copy to be justifed, keeping the tabbed indents. Help and advice needed please!

Hi
That screen grab helps a lot. There’s a much easier way of doing what you’re doing.
Remove all your tabs and set the text in justified paragraphs.
I’ve typed in dummy text in the example I made below, but after “19.1” put in a space and put your blinking cursor after the space and before the ’N’ of ‘Notices'.
Then hold down the Command key and hit Backspace (on Mac at least - it’s the key between the Inverted commas/ apostrophe key and the return key).
The text will jump into place the way you want it to.
Hope that helps
Paul
PS You can set a tab, instead of using a space, in the description I gave above. So, after 19.1 or 19.2 or 19.185 etc etc insert a tab, then hit the Command Backspace after every paragraph number and they'll all line up exactly together. You'll find that editing text within the paragraphs
after you've set it will be LOADS easier this way.
You can put the tab anywhere you want it to be using 'Command-ShiftT' and putting a 'left align' tab just after the number. Just type the Command Backspace after the paragraph number and it'll work

Compatibility Issues with CS2 and Windows 2000 XP??? This is supposed to be THE one operating system CS2 DOES WORK ON? Can someone help - I really need my CS2 back! Thanks.

HELP! Years ago - SEVEN to be exact- I PURCHASED Adobe CS2 and used it extensively. Then I was in an accident that took five years to recover from. After my recovery I tried to get back to using my Adobe products only to find that Adobe was discouraging use of CS2 and since I OWN a LICENSE and that was the LAST version I used I wanted to begin again with a version I am familiar with. Many months later, apparently I wasn't the only one who wanted to KEEP USING CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT due to OS compatibility issues Adobe continues to discourage downloading and use. HERE'S THE THING: I have the SAME SYSTEM running the SAME OS as when I first PURCHASED IT. I have downloaded the EXACT SAME VERSION of CS2. It installs fine. But I cannot OPEN the application and the troubleshooter reports there are "COMPATIBILITY ISSUES". WHY?!?!?!?!?
I'm on a PC running Windows 2000 XP. I OWN a LICENSE for Adobe CS2 and it used to run on this very same machine. I had to re-format my system two years ago so it has much more free space but when I try to OPEN the application it won't run. When I run the Windows Troubleshooter it reports system compatibility issues?! Can anyone advise me what to try now??? Thank you.

Yes, I have. My system was completely cleaned of everything and I'm just now RE-INSTALLING CS2 for Windows2000 XP from the Adobe site that gives you versions to select for your OS. I have successfully downloaded disks 1,2 and 3 and I can INSTALL disks 1 and 2, but it FAILS at disk 3. I REALLY need to resolve this today because I need to submit some work by tomorrow and the troubleshooting isn't helping!
Can you advise anything else . . . anyone? Thank you!
Khrystle13

Please help . i really need help ! T^T

this is my recipt i want to return the ipad mini . i want to buy ipad mini the one that i can insert the sim card inside but this one is the wifi one which i can't put the sim card inside . i am now in thailand could u please tell me anywhere that i can return this . because i buy it as a gift to my parents and i just noticed this today . please contact me as soon as possible . i will be back to uk in 07/01/2014 which is over 14 days . i really want to return could you please give me any suggest about this ? i don't know why they give me this one . it is not the one that i wanted . please contact me as soon as possible ! .
<Personal Information Edited by Host>

You are not speaking to Apple here. We are all just users like you. I've asked the host to remove your private information from your post.
Unfortunately, there is nothing anyone here can do for you. You will need to contact the Apple Store from where you bought it.

Please help, I really need this

Recently my battery ran out on my 3gs and the screen went yellow! i kept it charged in but the screen remained black. When I plugged it into my computer it said iPhone is in recovery mode? so I clicked on the restore button, it downloaded iOS4.3.5 and when it was installing it just stops at 'Preparing iPhone for Restore' and it just sits there for a long time (My iPhone screen remained black this whole time). Then after about 5 minutes a dialogue will pop up saying 'The iPhone "iPhone" could not be restored. An Unkown error occured (1601) please help! My warranty ran out on my 3GS!I completely uninstalled iTunes and Mobile Device Support and it still won't work! My iPhone won't even come on when it's trying to update!
but you guys don't understand. My iPhone won't even light up, I dont even get a white screen anymore. All I can hear is that it's turning on and off while it's plugged in usb. My screen is black! No matter what i do it wont even light up. When i try to update and restore the screen remains black guys please please help!
ALSO:
The last site that i had that my phone was on is when i was trying to restore it. A yellow screen popped up and then it slowly faded to black. At first it was just a yellow screen then it was fading to black with black verticle lines that slowly took over the whole screen making the screen black.

Follow the instructions here: http://support.apple.com/kb/ta38633
Do NOT skip any steps.

Please help i really need it fixed

my blackberry curve 9300 wont come on, it loads the blackberry with the white bar and gets to the end of the white bar then stops there and freezes and its been like thisfor almost 3 weeks i have tried taking battery out and putting it in and left it alone for hours then it goes to white screen with 'reset' app error

Try this:
force the detection of the BlackBerry smartphone using Application Loader
http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB10144
or
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
O2 can do this for you too.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

HT1212 iTunes will not recognize my disabled iPhone 4s. Please help I really need my phone

Forgot my password now my phone is disabled. Im trying to do a factory reset through iTunes but iTunes isnt recognizing my phone at all. desperate fpr help!!!

iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

Ibook G4 freezes either when its on the grey loading screen or the blue screen. Sometimes I get it to my desktop but it always freezes in like a minute. Someone help I really need this computer!

I have tried everything online and my iBook g4 wont stop freezing. Safe Mode doesnt even help, it still gets stuck on the blue screen! It either gets stuck on the grey loading screen or the blue screen. Rarely I am able to boot past everything and get to my desktop but after about 30 seconds it freezes again. This laptop was passed down to me and I have no original papers or disks that came with this laptop. I am really trying to figure this out without buying a disk because if it doesnt work I wont be out $60. Someone help I have tried putting it in safe mode single mode holding c down during start up! I need more options.. Please this is the only computer I have right now! (PS: I know warranty has expired a long long time ago)

Hello,
Some information you may or may not have read.
Troubleshooting portables that won't turn on or start up
http://support.apple.com/kb/TA25686?viewlocale=en_US
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Without the disk you are limited on options. It could be an issue with the hard drive and would required the disk to run disk utility.

Graphics help (I think) needed, please...

Dear Experts,
Please help. I don’t know where to turn.
I recently bought myself a spanking new MacPro (Intel) and it’s lovely. I gave my old PowerMac G4 (Gigabit Ethernet/AGP Graphics) to my daughter who is about to depart to University and study Art, Media & Creative Writing.
The PowerMac G4 has been upgraded with a Sonnet Encore ST/G4 processor, an ATI Radeon 9200 PCI Graphics Card and 1.2GB of RAM. It’s also had a PCI SATA Card installed so that two hefty internal drives can be fitted – and they both work a treat!
I bought Final Cut Express for her since she’ll be making films and doing animation… but… the application itself was dimmed on the Installer disk because, I’m assuming, the ATI Graphics PCI card does not support Quartz Extreme (which FCE says it needs.)
I instantly did my research and settled on the ATI Radeon 9600 Pro (Win/Mac) AGP Bus card thinking that it would do the trick… but the gold connectors at the bottom of the new card have absolutely no way of fitting into the AGP Bus slot on the G4 when I remove the originally installed ATI Rage 128 Pro AGP Graphics card.
Now I’m stuck.
I’m very wary of doing any more research of my own since the card I thought would work has turned out to be a disaster. Can anyone tell me what I need and/or what to do to make this whole thing work. Is there an AGP Quartz Extreme compatible Graphics card I can use… or is there an older version of FCE that will be suitable with the current ATI 9200 PCI card? Everywhere I go I find conflicting and bewildering advice so some help from some real experts would be truly terrific.
I thank you (in advance) for any help you can offer.
Danny
PowerMac G4 (AGP Graphics) Mac OS X (10.4.10)

Wonderful replies. Cheered me up when I returned (twenty minutes ago) from an arduous trip to Copenhagen. Even the Danish pastries couldn't do that!
The answer is, "yes" - it will install quite happily on the Mac Pro and I don;t get any "Uh-oh, where's the Quartz Extreme I'm looking for?" messages - and that's what led me to deduce that it was all graphics-card related. I'm very willing to believe I'm wrong, but I'm no expert, and I don't know what I should try next.
In the meantime, I'll just creep off into a corner and carry on laughing at the banter on this page!
Thanks for your help, guys.
Danny

Help using Clipboard needed, please!

Hi I would really appreciate a little help with the implementation of the Clipboard class in my applet/application.
I am designing a small program, I will run through quickly how and what this project does. The program is designed to check text given by the user to make sure that it doesn't contain material already held in a separate protected text file. For example I have a text file on my computer I would open this file, select all, copy & paste this into my program. Then I would press an 'OK' button in the GUI, the program would then check whether any of the text given by the user was already in a separate text file which belongs to the program.
So basically the program reads the user text comparing each line to the text file kept with the program. If the users text is the same as the external text file, the program would alert the user of this problem.
I hope that made sense, so getting to the point about the Clipboard class. The text that the user is to input into the program would be considerable in size so it wouldn't be feasable to expect them to enter it by hand. It would be far more suitable for them to be able to use the Clipboard fascility so they could copy and paste into them program. If any of you have any examples of this class being used I would be really interested in seeing your work and adapt some of it to my own creation. Any other advice in the design or whatever would also well appreciated. I am keen to do all the hard work I'm just a little confused by the Clipboard class and would like a little guidance.
Hope to hear something soon, Dave.

First off, the Clipboard class is in
java.awt.datatransfer, along with some other necessary
classes and interfaces. Here's a quick'n'dirty way to
get the contents:
String contents =
Toolkit.getDefaultToolkit().getSystemClipboard().getCon
ents().getTransferData(DataFlavor.stringFlavor).toStrin
();It's a little messy, but break it down and it works
quite easily. It would be nice to just have one
static method that would do it all for you, but that
might violate some programming style conventions.
-Tim
P.S. Just kidding, hambonethx this could be usefull :)

Missing help contents - really need to reinstall?

Hi there,
from one day to the next I got problems with the Mac help viewer: when started I
- get an empty window
- "home" button takes you to the "home"page (the one with the iChat video conference ad picture) but no links work
- entering some search string either has no effect or sometimes yields a very small number of entries without apparent relation to the search string where the corresponding links do not work but take you back to the help "home"page
I followed the instructions as specified in post http://discussions.apple.com/thread.jspa?messageID=1724496&#1724496
which points to http://www.thexlab.com/faqs/helpviewer.html and which definitely is a very interesting and great resource.
I am at the stage where a review of the console log is suggested just prior to reinstalling help with Pacifist and before I go down that road I was wondering whether anybody might make anything out of the error message in the console log: Starting help viewer shows a number of messages. The last two messages incl the error read
2006-03-31 18:47:50.400 Help Viewer[343] lookupAnchorGlobally called with anchor = mchlp001, indices = {
[...contents removed: lots of help index files...]
}, and maxHits = 25
2006-03-31 18:47:50.483 Help Viewer[343] * NSRunLoop ignoring exception '* End of archive encountered prematurely at 400' that raised during posting of delayed perform with target 373cc0 and selector '_setupTOC'
Well, except for recognizing that something is wrong here, the question really is - what is wrong? And may I fix it without reinstalling the help files/system?
If the only recommendation is to reinstall the help files - my DVDs are for 10.4.2, but I have upgraded in the meantime to 10.4.5: So, where do I get the latest helpfiles?
Thanks
DocJoc
PPC G4 15" Powerbook Mac OS X (10.4.5)

If the only recommendation is to reinstall the help
files - my DVDs are for 10.4.2, but I have upgraded
in the meantime to 10.4.5: So, where do I get the
latest helpfiles?
You don't really upgrade the helpfiles like you upgrade your Apple software through the Software Update, Help Viewer automatically connects to Apple Support and fetches any updated info...

Help with Launchpad Needed please.

Please can some one tell how to stop getting all these updates in my Launchpad, I downloaded some code which got rid of the icons,(Happy) I started to organise them all, then Microsoft update put 20 icons on it, and they cannot be trashed. Hate This! Its a waist of time using the code to delete if everytime there is an update on something or other, loads of icons appear. Why can I not have control over my own Mac!

I think Ive worked out my own problem...
After I attach the model to the parent with addChild, i then
set its transform to transform(). ie.
theChildModel.transform = transform()
Which solves the problem of the child being offset from the
parent.
(below is a seperate problem, I'm using a sphere primitive,
so theres no issue with possibly the sphere having an popsitional
offset when i attach it as a child. My previous question was in
relation to when I attach the actual head object, which did have an
offset)
But Now, I have a problem with the parent being positioned
incorrectly when I try to use boneplayer to animate it.
I tried to get down to basics, to work out where the position
was first going wrong, and its when i add the bonesPlayer modifier.
These are the simple steps I take...
I copy the Torso model into the 3D world. (this has a bone
structure and a dummy Model in the correct position for head,
hands, feet)
Then I create a sphere primitive.
Then I add the sphere as a child of the Torso's child[1]
dummy Model, which I know is the 'head's dummy Model.
That works fine, the sphere is in the correct 'head'
position.
But then when I add the bonesPlayer modifier to the Torso
Model, the sphere jumps to an incorrect position(about in the
middle of the torso model).
Anyone experienced something like this before? Should I be
doing something first before I add the bonesPlayer modifier?
I have a very trimmed down demo of what Im talking about, if
anyone would like to see the code.
Any help greatly appreciated.
Glen

Help, i really need my phone for security this weekend and now i cant get it to do anything :(

Hi, i went to sync and back up my iphone 3GS as i ahve done many times before, it encountered an OS problem and put the phone into a restore mode. Now i havnt had this happen before, it has the USB cord with itunes logo on screen, cant get the phone to do anything else. When i plug it in it says i have to restore.. But will i then as i suspect loose my 600 new work photos, data, games progress, work notes, new contacts etc as i suspect i will? please someone tell me no and there is something i can do to avoid this.

The data is already gone. You have no choice but to restore.

Help with Divs need please

Hello could someone possibly help me.
My page layout has a top banner ("banner"), then main content
below in the middle (middletext), and a fotter ("footer") below the
"middletext" div
I want place a div of say 100px directly to the right of the
"middletext" div. The layout is fluid so I want the right div to
move with the rest of the page when resized in an IE window. Here
is the code for the css -
body {
background-color: #666666;
background-repeat: repeat-x;
#background {
background-color: #999999;
background-repeat: repeat-x;
width: 80%;
#content {
background-color: #CCCCCC;
background-repeat: repeat-x;
height: 300px;
#middletext {
background-color: #FFFFFF;
background-repeat: repeat-x;
margin-left: 200px;
margin-right: 200px;
height: 300px;
#footer {
background-color: #9999FF;
background-repeat: repeat-x;
height: 100px;
#rightcontent {
background-repeat: repeat-x;
width: 100px;
background-color: #CCCC66;
height: 100px;
position: absolute;
left: 1052px;
top: 135px;
#banner {
background-color: #996633;
background-repeat: repeat-x;
height: 100px;
And the code for the html page -
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<link href="test.css" rel="stylesheet" type="text/css">
<script language="JavaScript" type="text/JavaScript">

</script>
</head>
<body>
<div id="background">
<div id="banner">Content for id "banner" Goes
Here</div>
Content for id "background" Goes Here
<div id="content">
<div id="middletext">Content for id "middletext" Goes
Here</div>
id content </div>
<div id="footer">Content for id "footer" Goes
Here</div>
</div>
</body>
</html>
I also have the width of the page set to 80%, just to give a
small border, but how can I center the entire page?
Many thanks in advance!!
Billy.

Add the 'right' <div> before the 'middletext'
<div> and float it right
with a width of 100px. See code and css below.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<link href="test.css" rel="stylesheet"
type="text/css">
<script language="JavaScript" type="text/JavaScript">

</script>
<style>
body {
background-color: #666666;
background-repeat: repeat-x;
#background {
background-color: #999999;
background-repeat: repeat-x;
width: 80%;
#content {
background-color: #CCCCCC;
background-repeat: repeat-x;
height: 300px;
#middletext {
background-color: #FFFFFF;
background-repeat: repeat-x;
margin-left: 200px;
margin-right: 200px;
height: 300px;
#footer {
background-color: #9999FF;
background-repeat: repeat-x;
height: 100px;
#rightcontent {
background-repeat: repeat-x;
width: 100px;
background-color: #CCCC66;
height: 100px;
position: absolute;
left: 1052px;
top: 135px;
#banner {
background-color: #996633;
background-repeat: repeat-x;
height: 100px;
#right {
float: right;
width: 100px;
background-color:#FFFFFF;
</style>
</head>
<body>
<div id="background">
<div id="banner">Content for id "banner" Goes
Here</div>
Content for id "background" Goes Here
<div id="content">
<div id="right">right</div>
<div id="middletext">Content for id "middletext" Goes
Here</div>
<div id="footer">Content for id "footer" Goes
Here</div>
</div>
</div>
</body>
</html>

Help desperately really needed please

Similar Messages

Maybe you are looking for