Help determining what effect this is...
Can anyone tell me what effect is being used in this video in seconds 0:41 to 0:47?
http://youtu.be/z6UogdAqyW4
Thanks,
Matt
What effect? I don't see anything special there, just some basic animation. If you mean the radial "ray" like stuff, then this could be a Bulge effect with strong settings or something similar.
Mylenium
Similar Messages
-
A weird 'person sitting at a laptop ' icon pops up suspending the use of my Mac. I see a countdown for 3 minutes and a line of letters to type in to allow me to continue working. I have 2 minutes to work. Help. What is this!
Hate to say it. I isolated this to only be happening with email/Mail program. Then ran Sophos Virus detector on it and it did show a trojan virus in my email spam folder. I eliminated it ; ran disk utility a couple of times and I am good now. Spent the whole day on it though before I thought of using a virus scan... as soon as I started running sophos it stopped sending me the two minute timer as well--so just opening the virus software was able to disengage whatever was happening. My computer is all mac --no PC interface added at all. Hope that was that. Thank you for responding.
-
when syncing my ipad I get the message 'iTunes cannot sync apps to the iPad "..." because the apps installed on the ipad could not be determined'; what does this mean?
I'm pretty sure it's a bug in either iOS 6 or iTunes 10.7. I kept getting it until I quit iTunes and re-ran it again. I then started sync from the iPad itself.
-
While syncing, I got this message: "iTunes cannot sync apps to the iPad “temp’s iPad” because the apps installed on the iPad could not be determined" What does this mean and what should I do?
Based on an online post, I tried the following and it worked for me:
1. Windows 7: Control panel > Device Manager
2. Right click my PC's name > "scan for hardware changes"
3. Restart iTunes
4. Restart IPad
5. Connect IPad
6. Still I got the same error
7. Restart iTunes
8. Restart IPad
9. Connect IPad
10. It worked and I was able to sync the apps!!
Prior to this I had removed few apps, not sure that was a trigger.
System: IPad 1, IOS 5.x -
Indesign states" file archive is missing..." we have already downloaded part 1 and 3. help? what does this mean
In this case , you may try alternate method.
Install apps like Winzip or Winrar or 7-zip.
http://www.rarlab.com/download.htm
or
http://www.7-zip.org/download.html
Right click on File 1 of 3 : InDesign_8_LS16.7z [1.9 GB]
Then extract the file and then open extracted folder and run setup.exe .
It will install InDesign CS 6. -
My volume isn't working on music an other stuff on my iphone, like my lock sound isn't working neither is my typing clicks, my volume control has gone from my music too, help me, what is this???
Oh, I forgot to add that I've also tried repairing permissions.
-
Need help identifying what problem this is
Hi
I just want to know if:
Is this a common problem with LCD Monitors?
What is this display issue called?
Is this fixable? If so, how?
I know this is a monitor issue because I've tried many troubleshoots.
Please answer my questions above, I don't prefer replacing my monitor yet. Also, I couldn't take screenshots because the lines or dots don't appear to other users so I used a camera.
Blue lines or dots in some areas. I think they are consistent in bright areas. Captured from my background wallpaper. Pink lines or dots in what I suspect dark areas. Captured from a game (League of Legends)What effect after 10 seconds? There's a scale/jitter effect then an over exposure effect with fades to black and there's a blue light streak? You mentioned brush strokes so I think it's the light streak.
For that you can use Beam, or small solids stacked on top of each other with various blurs and blend modes set to Add or Screen and a lens flair, or a half dozen different particle effects, or . . .
Catch a still frame and show us what you're trying to achieve and we can help more.
or ?? -
Need help knowing which effect this is.
Hey guys I need some help with an effect in a video I saw and I was thinking maybe someone here would know which effect this is.
So it's the effect that occurs after 10 sec.
Thank you in advanceWhat effect after 10 seconds? There's a scale/jitter effect then an over exposure effect with fades to black and there's a blue light streak? You mentioned brush strokes so I think it's the light streak.
For that you can use Beam, or small solids stacked on top of each other with various blurs and blend modes set to Add or Screen and a lens flair, or a half dozen different particle effects, or . . .
Catch a still frame and show us what you're trying to achieve and we can help more.
or ?? -
HELP! What does this ERROR mean???
Hey ya all...=))
I have a situation and was hoping that you guys could look into it. I am currently working on my project using NetBeans 5.5. I downloaded the Sun Java System Application server (SJSAS) for project purposes. As usual, I will need to start the server. However, a pop-up error occured indicating that the server is not functioning due to certain reasons. I do not know how are the errors related to my project. Thus, I seek help from all you brilliant thinkers!
P.S: The Error says;
The Sun Java System Application System could not start.
More information about the causes is in the Server log file.
Possible reasons include;
- IDE timeoout: refresh the server node to see if its running now.
- Port conflicts. (use netstat - a to detect possible port numbers already used by the operating system.)
- Incorrupt server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start. (This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
What I've done so far;
- I placed the Server installation in :C drive.
- I also receive an output in NetBeans stating that it could not listen on port 1527 on host localhost.
- The project im currently working on is Java Pet shop to explore on the API codes.Hi,
It mean that you are traying read the character number (string.length()+16)... you are out of index by 16 characters
example:
String str= "Any Text";
// if I execute
// str.substring(50)
Java say:
java.lang.StringIndexOutOfBoundsException: String index out of range: -42
--> String str value ("Any Text"), length are 8 character... I try to read the 50 charcter... then out by 42 !!
Enjoy ! -
HELP! What's this light?? N86
Hi Forum.
I'm still trying to work my new N86 phone...the first N series I've ever had. But when my keypad is locked, and when the phone is on standby mode...the menu button flashes white on and off...I say "flashes" but it's more like it fades on and off.! It doesn't do this all the time and I can't work out why it's happening or what I do normally to stop it.
I thought I'd left an application open, but I haven't. So I thought maybe it was a new message come through, which it hasn't. So I thought maybe I left my camera on, which I haven't.
Whats this fading white light on the menu button? HELP PLEASE! I'm going insane!
ThanksIt's called "breathing" and it's function is to show that the phone is switched on. If you have a missed call or message it will flash more often.
The light can be disabled in the settings menu. It should mention it in the user guide if you can't find the option. -
Help! What is this and how do I make it go away?!
I was trying to make sure a list from an internet page was written identically in a word document, and had them pulled up next to each other, side by side. I must have unknowingly pushed something to activate whatever this thing is, because it suddenly minimized one of the two screens and now it won't let me pull both a Word document and a Safari screen up at the same time. If I have one up, and try to pull the other up, this thing pops up and minimizes the first screen, and pulls up the screen from the other app. I am getting really frustrated trying to figure out how to un-do whatever I did that made this start happening. Can anybody help?
Is it possible that the F10 key is stuck in the down position?
Something like the effect you describe is produced by hitting the F10 key on a standard keyboard.
On a laptop keyboard you would have to hold down the fn key (far left, bottom row) and hit the F10 key at the same time. The F10 is on the top row, above the 0 (zero) key.
So try jiggling the fn key as well as the F10 key to see if you can get rid of the problem. -
Need help determining what DPS product to go with
So I work for a small company that prints 25 editions per year of guides to national parks that are distributed for free at places like hotels and triple A's. We want to create digital versions of these guides for the iPad (and possibly other types of tablets but probably just the iPad for now). I am looking over the DPS options and I am trying to figure out which option would be the most cost effective and appropriate for us.
Since we only create the guides once a year, I don't feel like having the monthly subscription plan from the Professional Edition makes much sense - unless we could just have it for one month? (would we need to pay for it only while we are updating?) But if we went with the Single Edition, then my concern would be that we don't want 25 different apps - but rather one app with 25 different editions accessible within it. Is it possible to have 25 different apps under one heading with Single Edition? (there was a mention of a "Branded Content Viewer" in the Single Edition features. Also what would be the deal with folios? Does a folio = an edition? and does anyone know what the price would be per folio if we went with the Professional Edition?
Anyways, I'd love to get some feedback about this issue.
Thanks,
NadiaYou cannot have 25 different apps in one single edition.
But…how large are these guides? If they’re small enough you could put them all into on app and have a TOC link to each.
Bob -
I tried to turn my mac on 2 days ago and this is what came up. The message tells me to restart my computer but every time I do it just comes back to the same screen. We done have Internet at my home so I am unsure how this could have happened. Any help would be greatly appreciated.
what is your mac OS version and your iMac model? The pre-2006 iMacs this forum covers have different troubleshooting steps from newer iMacs, so we need to make sure which you have. The non-intuituve forum labeling here means people with relatively recent iMacs are tricked in to posting here instead of a more active forum for iMacs made since 2006.
-
Autonomous 1231/1242 Radius Config Help. What is this not working?
Hey Guys,
I can't seem to get the SSID RadiusTest to work properly.
Windows PC's show "Windows was unable to find a certificate to log you into the network". Macs don't authenticate either. Radius server isn't seeing any requests at all. Radius server is working because we are authenticating other things to it.
On my test 1231, IOS is 12.3(8) JEB1.
And all help is appreciated.
Thanks,
Scott
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname TKS-AP1231-ICTServices
enable secret 5 $1$Izyg$qXSRYpFDI9ZX6F50vDrku0
clock timezone K 10
clock summer-time K recurring
ip subnet-zero
ip domain lookup source-interface BVI1
ip domain name domain.com.au
ip name-server 172.16.###.###
ip name-server 172.16.###.###
aaa new-model
aaa group server radius rad_eap
server 172.16.###.### auth-port 1812 acct-port 1813
ip radius source-interface BVI1
aaa group server tacacs+ tac_admin
aaa group server radius infrastructure
aaa group server radius clients
aaa group server radius central_auth
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa group server radius rad_eap1
server-private 172.16.###.### auth-port 1812 acct-port 1813 key 7 060D062F4B5D1B18045GHW1E0718
server 172.16.###.### auth-port 1812 acct-port 1813
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login method_infrastructure group infrastructure
aaa authentication login method_clients group clients
aaa authentication login method_Central group central_auth local
aaa authentication login eap_methods1 group rad_eap1
aaa authorization exec default local
aaa authorization exec method_Central group central_auth local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
dot11 mbssid
dot11 vlan-name Conference vlan 150
dot11 ssid RadiusTest
vlan 18
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
mbssid guest-mode
dot11 ssid Staff
vlan 17
authentication open
authentication key-management wpa optional
wpa-psk ascii 7 055E5F5E0555401B161003171928013C22272D6B6370
dot11 ssid Student
vlan 16
authentication open
authentication key-management wpa
guest-mode
mbssid guest-mode
wpa-psk ascii 7 02575102282A2323434F1B1D0C1915595A5C
dot11 network-map
dot11 arp-cache optional
username ########## privilege 15 password 7 ###################
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 17 mode ciphers tkip wep40
encryption vlan 16 mode ciphers tkip
encryption vlan 18 mode ciphers aes-ccm tkip
ssid RadiusTest
ssid Staff
ssid Student
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
no power client local
power client 50
power local cck 50
power local ofdm 20
channel 2437
station-role root
interface Dot11Radio0.6
encapsulation dot1Q 6 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.16
encapsulation dot1Q 16
no ip route-cache
bridge-group 16
bridge-group 16 subscriber-loop-control
bridge-group 16 port-protected
bridge-group 16 block-unknown-source
no bridge-group 16 source-learning
no bridge-group 16 unicast-flooding
bridge-group 16 spanning-disabled
interface Dot11Radio0.17
encapsulation dot1Q 17
no ip route-cache
bridge-group 17
bridge-group 17 subscriber-loop-control
bridge-group 17 port-protected
bridge-group 17 block-unknown-source
no bridge-group 17 source-learning
no bridge-group 17 unicast-flooding
bridge-group 17 spanning-disabled
interface Dot11Radio0.18
encapsulation dot1Q 18
no ip route-cache
bridge-group 18
bridge-group 18 subscriber-loop-control
bridge-group 18 block-unknown-source
no bridge-group 18 source-learning
no bridge-group 18 unicast-flooding
bridge-group 18 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface FastEthernet0.6
encapsulation dot1Q 6 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface FastEthernet0.16
encapsulation dot1Q 16
no ip route-cache
bridge-group 16
no bridge-group 16 source-learning
bridge-group 16 spanning-disabled
interface FastEthernet0.17
encapsulation dot1Q 17
no ip route-cache
bridge-group 17
no bridge-group 170 source-learning
bridge-group 17 spanning-disabled
interface FastEthernet0.18
encapsulation dot1Q 18
no ip route-cache
bridge-group 18
no bridge-group 18 source-learning
bridge-group 18 spanning-disabled
interface BVI1
ip address 172.16.#.### 255.255.255.192
no ip route-cache
ip default-gateway 172.16.#.###
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
logging history debugging
snmp-server view iso iso included
snmp-server community KingsRO RO
snmp-server community KingsWr1t3 RW
snmp-server trap-source BVI1
snmp-server location ###
snmp-server contact ############################################
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps tty
snmp-server enable traps entity
snmp-server enable traps disassociate
snmp-server enable traps deauthenticate
snmp-server enable traps authenticate-fail
snmp-server enable traps dot11-qos
snmp-server enable traps switch-over
snmp-server enable traps rogue-ap
snmp-server enable traps wlan-wep
snmp-server enable traps config
snmp-server enable traps syslog
snmp-server enable traps cpu threshold
snmp-server enable traps aaa_server
snmp-server host 172.16.###.## version 2c cisco udp-port 1620
radius-server host 172.16.###.### auth-port 1812 acct-port 1813 key ##########################
bridge 1 route ip
wlccp ap username wds password #################
wlccp authentication-server infrastructure method_infrastructure
wlccp authentication-server client any method_clients
banner login ^C
^C
line con 0
line vty 0 4
sntp server 172.16.###.###
sntp server 172.16.###.###
sntp server 172.16.###.###
sntp broadcast client
endYou configured your WDS to use empty radius methods. There's no much point to this apart from breaking your setup.
Remove all 3 "wlccp" commands. I suggest to have your normal radius working before you try and do WDS.
If behavior is still the same, then it means that the radius server has to get a request if the clients are proposed EAP-TLS and they are looking for a certificate to authenticate with ...
Did you pre-configure a profile on the client ? Did you configure them for PEAP ? EAP-TLS ? Which method do you allow on your radius server.
Nicolas -
Help! What does this icon mean???
Hello,
I hope this isnt too stupid of a question but could someone tell me what this icon means? I've tried searching around on Google with no results.
I think its an error icon but the report appears to work correctly and there was no error message.
!http://mouchet.ca/SQL-ICON.png!
THANK YOU!It was a good question! Althought i'm not 100% sure, I've done some tests and I think that if you look at your SQL statement you should see that there's a sub-query in it. That was my case. If not would you please post your query ?
In my case : select 1 from mrn_invoice MINVO where exists (select 1 from fac_invoices FINVO where FINVO.no_seq = MINVO.no_seq) ;
Francis
Maybe you are looking for
-
Hi All, I have implemented ESS and MSS on EP6.0 SP9.I am getting following portal runtime error in the photo iview of the employee profile workset in MSS. Error in executing a process for compilation. I checked the log file for the deatils..which sho
-
Delivery Split during creation of delivery using ME2O
The system creates two delivery documents for the same vendor while using transaction ME2O. There is no delivery split criteria defined in customizing
-
ok i already have 3 pdf in the same file and i want to add another one but when i drag that pdf to the sidebar it makes it look hudge and the other pdf's turn really small. and they all have the same pixels
-
Using temporary tablespace for sort in select statement without spacifying
how can i use some particular temporary tablespace in select statement for sording without allocating any temporary tablespace to that user
-
Nesting Application Modules from different Projects(solved).
I am wondering if there is a possibility of nesting application modules that are part of different projects? thanks, Florin Message was edited by: florinmarcus