Help - Did I lose my run data when the ipod battery died?

I was running today on a very low battery. As I approached the end of the run the battery went dead and the Ipod shut off.
Does the Nike+ record run information at mile markers or only when you end the run?

thanks

Similar Messages

After i erased whole data from the ipod touch 3rd gen. when i put back to sync it. it says in the windows connect to itunes, which i did,i also installed new itunes but still it doesnt recognise . pls help me if u have gone thru same trouble like me.

after i erased whole data from the ipod touch 3rd gen. when i put back to sync it. it says in the windows connect to itunes, which i did,i also installed new itunes but still it doesnt recognise . pls help me if u have gone thru same trouble like me
Thanks

I do not understand what "it says in the windows connect to itunes" means?
What is "it" and what is "windows"?
Maybe:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

How to display ETL run date in the title view of any report.

Hello Expert,
I have a requirment to show the ETL run date in the title of the report.
Eg: " Sales Vs target Report : Data loaded as on date: <ETL run date>.
The ETL run date is coming in the fact table.
I am working on the OBIEE 11.1.1.5. So pla help if it is possibe.
Thanks in Advance.
Niraj

Thanks for response.
I tried to do the same. but unable to achieve. I did the following,
1. Created a init block with SQL which extract the value of ETL rundate ans associate with a repository variable (ETL_RUN_DATE). This init block was retriving the data.
I put the folowing in the Title as well as sub title view:
Data loaded as on date: (@{biServer.variables[ETL_RUN_DATE]})
I also tried to put Data loaded as on date: @{repository.ETL_RUN_DATE} this also didnot worked.
So could you please provide me the steps with actual syntax, then it willbe very much helpful for me.
Thanks
Niraj

How to find the last run date of the report..

please any one one help me
how to find last run date of the report...
for example if my report is zgrir...if i am exuted in last week
if want to find when it executed
last run date is req
please any one help me...

The trasaction stat is limited because i want all the execution date even if it is 3 years ago.
I have tryied the transaction st03 but it is limited to 3 months ago.
check transaction STAT and it's report RSSTAT00.
U can copy RSSTAT00 into ZRSSTAT00 and modify corresponding.
*& Report ZDSAP *
REPORT ZDSAP .
DATA: d_ref TYPE REF TO data,
d_ref2 TYPE REF TO data ,
i_alv_cat TYPE TABLE OF lvc_s_fcat,
ls_alv_cat LIKE LINE OF i_alv_cat.
TYPES tabname LIKE dcobjdef-name .
parameter: p_tablen type tabname.
data: begin of itab occurs 0.
INCLUDE STRUCTURE dntab.
data: end of itab.
FIELD-SYMBOLS : <F_FS> TYPE table,
<F_FS1> TYPE TABLE,
<F_FS2> TYPE ANY,
<F_FS3> TYPE TABLE.
REFRESH itab.
CALL FUNCTION 'NAMETAB_GET'
EXPORTING
langu = sy-langu
tabname = p_tablen
TABLES
nametab = itab
EXCEPTIONS
no_texts_found = 1.
LOOP AT itab .
ls_alv_cat-fieldname = itab-fieldname.
ls_alv_cat-ref_table = p_tablen.
ls_alv_cat-ref_field = itab-fieldname.
APPEND ls_alv_cat TO i_alv_cat.
ENDLOOP.
internal table build
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING it_fieldcatalog = i_alv_cat
IMPORTING ep_table = d_ref .
ASSIGN d_ref->* TO <F_FS>.
SELECT * FROM (p_tablen) INTO CORRESPONDING FIELDS OF TABLE <F_FS>.
LOOP AT <F_FS> ASSIGNING <F_FS2>.
*your code goes here.
ENDLOOP.

How to view the date when the Customers credit limit updated in SAP-FSCM?

How to view the date when the Customers credit limit updated in SAP-FSCM?

OK you can look at field - LIMIT_CHG_DATE in the table - UKMBP_CMS_SGM via SE16
I would assume you would want to run it based on a date range.

Date when the cube was filled with data for the last time

Hi!
We are using a SAP BW System and on top of it BOBJ for reporting. Within BEx Web Application Designer, it's very simple to access the data, when the cube was filled with data for the last time. Is it possible to access this information within BOBJ, too?
Thanks for your help!
Greetings
Stefan

Hallo Ingo,
thanks for your answer. That was exactly what we were looking for.
We will have to think about a workaround now.
Greetings
Stefan

Where can I find the date when the pre-sale movies will be released?

Where can I find the date when the pre-sale movies will be released?

Hi Claudia1950,
Thanks for visiting Apple Support Communities.
According to the following article on iTunes Store pre-orders, "Most pre-orders will show an expected release date near or below the pre-order button."
You may also find this information helpful:
When a pre-ordered item becomes available, you will receive an email letting you know that you can download your pre-order.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
Best Regards,
Jeremy

How to find the date when the users has been created in Hyperion Essbase

Please let me know, if there is any option or way to find the date when the users has been created in Hyperion.
Essbase - 9.3.1.0.0
Sun Solaris SPARC (32-bit) - 5.8
If not in Hyperion, could you please let me know if it gets stored in the repository. If yes, please let me know the table name in Oracle.

I don't know of a way of getting this information from Shared Services via the standard web UI. However you can see when a native user was created in openLDAP. If your users are all native then you can use an ldap browser to view the CreateTimestamp.
Port: 58089
User DN:CN=911,ou=People,dc=css,dc=hyperion,dc=com
Password: Your shared services admin user password
You should see each new native user under the ou=People and each CN will have a create timestamp.
I can't help if all you users are external or your using the old Essbase native security.
Gee

How to find the date when the cube was created

Hi gurus
I just want to find out the date when the cube was created,
Regards
Kumar

Kumar,
Go to table RSDCUBE, you can see date there.
Hope it helps,
Sam

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? Also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard 10.6.8?

No and Yes
Don't use TM for this purpose, clone your drive to an external, plug the external into another MBP and reboot from it. Please note that booting a machine that came with Lion may not be possible from a drive with Snow Leopard.

How do I move a partition on my mac hard drive, to an external hard drive so that i can run windows when the external hard drive is connected

How do I move a partition on my mac hard drive, to an external hard drive so that i can run windows when the external hard drive is connected

Are you talking about a Bootcamp partition? You can't boot Windows from an external drive.

How can I generate data when the link is click on?

i have written a stackoverflow question ,
would like some input if you have any , thanks, i would like to stay away from using jquery
http://stackoverflow.com/questions/23143436/how-can-i-generate-data-when-the-link-is-click -on/23143813?noredirect=1#23143813

I think you need to rephrase your question and be more specific. Also for me the images you are referring to do not exist. From your question I am interpreting it as "how do I program?"

How do you have the help file .chm hold its window position when the user resizes the help window.

One of my customers is complaining that the help contents will scroll out of view when the window is resized. Is there a way to anchor the position while the window is resized?

My CHM is a help file for an application. The application uses F1 to open specific topics for help. Therefore the help file needs to be visible but not cover the application to much. The Content in this situation is text however the help project contains Images, tables, text, etc.
If the user searches for the word "audio" in the search and it takes them to a section or sub topic that is half way down in the Topic, they would like that section or subtopic to stay in the same place as they resize the help window. Using Bookmarks if the topic is large enough clicking the search link will place the results in the top left of the doc view window, however this is not necessarily the top of the topic.
Im not sure how else to explain what the user is seeing, sorry.
Please explain "Also whether it remains consistent depends on whether an absolute or percentage value has been added to it."

I do not have access to my primary computer. I understand i will lose all saved data on my ipod touch. I have the latest vesion of itunes. I have a mac. Itunes does not recognize my device. What do i do?

I need to restore my ipod touch. I do not have access to my primary computer. I understand i will lose all saved data on my ipod touch. I have the latest vesion of itunes. I have a mac. Itunes does not recognize my device. What do i do?

Fix what?
You do not mention a problem.

Fix for "Unknown Device" when the iPod is connected

After a few long nights, a few headaches, hours and hours of reading, thinking and many toasted sandwiches, I finally found the problem to my iPod not loading. Putting together information I had read here and at many other sites I had a brainwave... and sure enough it worked. I figure this may be helpful to many other iPod users, so... here I am posting my solution. Note though, this wont help all users, but I know I wasnt alone with this issue, and this just might help someone.
Ill list the issue I was having (this may help other people identify their issue to mine) was that the iPod failed to work on windows, and threw a fit when plugged in. Windows did too, iTunes would lock up and the iPod software failed to recognise that an iPod was connected. The iPod had worked on an older PCs before, but it failed to work on my new homebuilt PC. When I first connected the iPod it began to work, transferring and updating.. but then it unexpectedly disconnected the iPod.. and mentioned something to do with an I/O error, the iPod had to be disconnected and it also mentioned something to do with a timeout error and dataloss (or as it put it Data has been destroyed. Thats always a pleasant message to read). Suddenly, half the music on my iPod wouldn't play, it skipped songs until it found a song it would play... really annoying. I tried to format the iPod using the iPod software... buuut it told me that it wasnt an iPod that was connected (Funny that... lol). After the first iPod crash, it would react differently when connected. It would once again pop up with the Found new hardware bubble, Apple iPod..., Disk Drive... ... then iTunes loads... then iTunes freezes... then the iPod disconnects 2 mins later, then iTunes unfreezes. THEN the next time the iPod is connected, it would say it was an Unknown device, and that it has Malfunctioned.
It seems that, oddly enough, my iPod (I own the 30gig iPod Photo) does not like USB 2.0... Im thinking that it must not support some of the device commands the PC is sending to it... Weird though, because on other USB 2.0 PCs it worked fine. (I got the best results out of Dell PCs...). IF USB 2.0 is disabled and slows to USB 1.1 the iPod works a charm... jumped up without an issue in the world. To disable USB 2.0, jump into BIOS as your pc is in its POST stages... this being, when the PC is first turned on and presents a message such as Press DEL to enter setup (or something similar), do so. Then refer to your manual on how to disable USB 2.0, if possible. Apply the changes and reboot. Be sure not to mess around with other settings, it is very easy to mess up your computer if you change settings you are not familiar with.
Other solutions would be to run the iPod via Firewire... if you can get a cable. Run along to your local mac store and see if they have one in stock. Ill get back on here to post if using Firewire solved the issue later.
Perhaps a motherboard BIOS upgrade, or newer drivers could resolve the issue. This may explain to some people why their iPod stopped working overnight after working fine for so long, maybe an update of the sort was installed. Apparently my motherboard already has an update, so Ill test that sometime and post my results as I investigate further, but as for now Im just happy my iPod is working, even if it is taking ages to transfer (25 gigs of music takes awhile over USB 1.1 lol...).
Also, I might add that my motherboard is an ASUS P5P800 with the Intel 865PE chipset. It could be an interesting pattern seeing which motherboards do not seem to be compatible with the iPod at USB 2.0 speeds.
As long as this post was I hope that someone gets some use out of it. Ill post further findings as I investigate this matter further.
Happy iPodding!

hi Jazza!
the best explanation for this that i've seen is that there can be power drain problems in USB 2.0. drop below 500 mA running through the port and everything goes to pot. this may well explain why switching back to USB 1.1 sometimes works like a charm, and also explains why it's important to have the ipod plugged into a high powered USB port rather than a low power port.
i've seen a confirmed case of a USB connection going west after a scanner got plugged into the beast in question ... periodically i see other reports along these lines, too.
Roger Whiteley, "USB Device Not Recognized" #16, 04:18am Aug 3, 2005 CDT
love, b

Help - Did I lose my run data when the ipod battery died?

Similar Messages

Maybe you are looking for