HELP!! Disk0s3: I/O error

On Tuesday night, after waking my computer from sleep, I tried using the internet. All of the sudden an unfamiliar sound was coming out from my computer, it sounded something metalic bouncin off the plastic? ( cant explain) and then it completly froze after I ignored it. I turned it off, next morning, I was using the computer everything seem fine, I put my computer to sleep, because i had to go somewhere. Then I woke it up, and it froze when I opened up the Safari. I turned it off, tried turning it back on. But after the spinner, I got a black screen that said Disk0s3: I/O error over and over again. I turned it off and hold down the option buttom performed a test, and got the following error code.
mac error code 2stf/8/3:5-ata
what does that mean and what do I do? I really need the data inside that computer! if anyone can please help me!

Hi josewiisantos:
It doesn't sound good. From you comments I take it you did backup the data.
From what you said it sounds like your disk is a candidate for sending off to a recovery service. That is going to cost some serious money.
Allan

Similar Messages

Disk0s3: I/O error? help

my ibook wasn't booting up properly, it would go to the gray screen and stop so i held down apple + S and ran the "fsck -y" command and it went find but when i typed in "exit" to boot up all it says now is "disk0s3: I/O error." and it won't boot up....at all. anyone encounter this before?

thanks for the update.
keep in mind to always back up any important files.
DiskWarrior is the best utility to fix corrupted files.

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

Need help in analysing the error in JasperReportIntegration Test Applicatio

Our DBA installed Jasper Reports Integration kit Version 1.1.0.0 in our test environment. Apex version is 3.2.1.00.12. Oracle database is 11g and Apache Tomcat is 7.0.26
I was able to bring up the Jasper Reports Integration test application. When I navigate to "Report Tester" tab, changed the JasperReportIntegration URL to the correct localhost and then cklick the "Show report (directly)" button, I got this message:
Jun 12, 2012 11:41:58 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet [ReportWrapper] in context with path [JasperReportsIntegration] threw exception [Servlet execution threw an exception] with root cause
Throwable occurred: java.lang.NoClassDefFoundError: net.sf.jasperreports.engine.util.JRStyledTextParser (initialization failure)
     at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
     at net.sf.jasperreports.engine.fill.JRBaseFiller.<init>(JRBaseFiller.java:121)
     at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:77)
     at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:87)
     at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:57)
     at net.sf.jasperreports.engine.fill.JRFiller.createFiller(JRFiller.java:142)
     at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:52)
     at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:417)
     at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:247)
     at de.oc.integration.jasper.webapp.ReportWrapper.service(ReportWrapper.java:318)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:224)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:927)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:407)
     at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:987)
     at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:579)
     at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:307)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:897)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:919)
     at java.lang.Thread.run(Thread.java:736)
Can anyone help me understand this error and let me know if this message is caused by installing the jasper report integration kit incorrectly?
Thanks.
Edited by: bratz69 on Jun 12, 2012 7:35 PM

Hi Dietmar,
Thanks for your reply.
There's no jasperreports-fonts-3.7.4.jar file in the webapps/JasperReportsIntegration/WEB-INF/lib folder. The only font file available is jasperreports-fonts-4.5.0.jar. I've downloaded the 3.7.40 jar file and saved it in the same folder without deleting the 4.5.0.jar. I tried to run the Test application again and still give me the same error.
Jun 13, 2012 3:58:26 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet [ReportWrapper] in context with path [JasperReportsIntegration] threw exception [Servlet execution threw an exception] with root cause
Throwable occurred: java.lang.NoClassDefFoundError: net.sf.jasperreports.engine.util.JRStyledTextParser (initialization failure)
     at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
     at net.sf.jasperreports.engine.fill.JRBaseFiller.<init>(JRBaseFiller.java:121)
     at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:77)
     at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:87)
     at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:57)
     at net.sf.jasperreports.engine.fill.JRFiller.createFiller(JRFiller.java:142)
     at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:52)
     at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:417)
     at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:247)
     at de.oc.integration.jasper.webapp.ReportWrapper.service(ReportWrapper.java:318)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:224)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:927)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:407)
     at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:987)
     at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:579)
     at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:307)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:897)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:919)
     at java.lang.Thread.run(Thread.java:736)
I also tried the suggestion from the link provided by Nick. However, the syntax is for SUN environment and we are using IBM so I searched the equivalent of that command in IBM. Our DBA added the Java system property in the startup script by adding these 2 lines. But it errored out on the first 2 lines. I'm not sure if I do have the right syntax.
java.version=1.4
java.awt.headless=true
----- Error
27) ./startup.sh
./startup.sh[25]: java.version=1.4: not found
./startup.sh[26]: java.awt.headless=true: not found
Using CATALINA_BASE: /dbfupg/apache-tomcat-7.0.26
Using CATALINA_HOME: /dbfupg/apache-tomcat-7.0.26
Using CATALINA_TMPDIR: /dbfupg/apache-tomcat-7.0.26/temp
Using JRE_HOME: /usr/java6/jre
Using CLASSPATH: /dbfupg/apache-tomcat-7.0.26/bin/bootstrap.jar:/dbfupg/apache-tomcat-7.0.26/bin/tomcat-juli.jar
----- Start up script
27) cat startup.sh
#!/bin/sh
java.version=1.4
java.awt.headless=true
os400=false
case "`uname`" in
OS400*) os400=true;;
esac
# resolve links - $0 may be a softlink
PRG="$0"
while [ -h "$PRG" ] ; do
ls=`ls -ld "$PRG"`
link=`expr "$ls" : '.*-> $.*$$'`
if expr "$link" : '/.*' > /dev/null; then
PRG="$link"
else
PRG=`dirname "$PRG"`/"$link"
fi
done
PRGDIR=`dirname "$PRG"`
EXECUTABLE=catalina.sh
# Check that target executable exists
if $os400; then
# -x will Only work on the os400 if the files are:
# 1. owned by the user
# 2. owned by the PRIMARY group of the user
# this will not work if the user belongs in secondary groups
eval
else
if [ ! -x "$PRGDIR"/"$EXECUTABLE" ]; then
echo "Cannot find $PRGDIR/$EXECUTABLE"
echo "The file is absent or does not have execute permission"
echo "This file is needed to run this program"
exit 1
fi
fi
exec "$PRGDIR"/"$EXECUTABLE" start "$@"
BTW, Thanks for the update on the new version.
Thanks!
Edited by: bratz69 on Jun 13, 2012 4:48 PM

Please Help me with the error P6

I recently installed the Primavera P6 but when I started
using it for the first time I get the following error
message :
C:\Program files\Primavera\Project
Management\Languages\comCaptions.en-us
<br
/>Please help me with this error ;
Thanks

Hi,
This sounds like an issue
that might best be handled by support. You can find
information on contacting support here:<br
/><br
/>http://www.primavera.com/customer/support.asp<br
/>
Thanks,
Sean

Hp pavilion dv6 6180 help me for this error when I am using my recovery disk

hp pavilion dv6 6180 help me for this error when I am using my recovery disk
The destination drive is not connected

Hello Mohammadshamlou. I understand that you're having some issues using your Recovery Disc. It is giving you the error that the drive is not connected. Is this correct? How long have you had the notebook?
What issue originally led you to want to try a recovery?
The error seems to imply that it is not detecting the hard drive as this would be the most logical destination drive. So, I feel the best thing to try first is verify that the hard drive is in proper working order. Follow these steps and please post the result.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". I've quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. HELP

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". As well as reloading, I've also quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. please help.
System: Mac OSX 10.9.4. 3.4ghz intel core i7, 8gb ram

Hello,
Adobe has brought these new links in this matter:
Troubleshoot Creative Cloud download and install issues and
App doesn’t open; progress wheel spins continually
Please have a look there. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter

Please help me with this error: "Apple application support was not found... Error 2"

Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank you

iTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it.

Please help me with this error I keep getting for attachments

please help me with my error message as I can't download attachments

Some information would be helpful... operating system, email client, Reader version, error message, ...

I need help with this code error "unreachable statement"

the error_
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errors
import java.util.*;
import javax.swing.*;
import java.awt.*;
public class Tools//tool class
private int numberOfToolItems;
private ToolItems[] toolArray = new ToolItems[10];
public Tools()//array of tool
numberOfToolItems = 0;
for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
toolArray[i] = new ToolItems();
}//end for loop
}//end of array of tools
public int search(int id)//search mehtod
int index = 0;
while (index < numberOfToolItems)//while and if loop search
if(toolArray[index].getID() == id)
return index;
else
index ++;
}//en while and if loop
return -1;
}//end search method
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0;
int index;
index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
}//end delete method
public void display()//display method
for(int i = 0; i < numberOfToolItems; i++)
//toolArray.display(g,y,x);
}//end display method
public String getRecord(int i)//get record method
// return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
}//end getrecod
}//end class
Edited by: ladsoftware on Oct 9, 2009 6:08 AM
Edited by: ladsoftware on Oct 9, 2009 6:09 AM
Edited by: ladsoftware on Oct 9, 2009 6:10 AM
Edited by: ladsoftware on Oct 9, 2009 6:11 AM

ladsoftware wrote:
Subject: Re: I need help with this code error "unreachable statement"
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errorsThe compiler is telling you exactly what the problems are:
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
int index;
index = search(id); //< -----------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
// <<== HERE where is the return statement?
}//end delete method
public String getRecord(int i)//get record method
// return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
}//end getrecod
}//end class

I have an error -5000 when I try to record in GarageBand..I urgen need help, I have an error -5000 when I try to record in GarageBand..I urgen need help

I have an error -5000 when I try to record in GarageBand V10,02..I urgen need help, I have an error -5000 when I try to record in GarageBand..
I just reinstal OSX 10,9,2 marveiks and downdload the GB.. but when I try to record, the error ocurr
I urgen need help
thanks

This is probably one of the files that is required by the template you are using.
These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
You need to dig down through the folders and files to find what you want...
Contents/Resources/da.lproj/Templates/
If the file is missing you would need to re install the iWeb app...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

Please help me find the error in the annex VI,access

Hello, everyone, this is a program about ACCESS, please help me find the error in the annex VI, why do I always run time error. Thank you very much.
Attachments:
write access test.vi ‏22 KB

Thank you for your reply, I have an attachment process map, could you help me change it, I just want to put my number in the array can continue to update the database. And I want to create a table.
this is my msn :[email protected]
Waiting for your reply on line
谢谢你的回复，我的附件中有程序图，能不能帮我改一下，我只是希望，把我的数组中的数能够持续的更新在数据库中。并且创建一个我想要的表。

Itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?

itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?

http://support.apple.com/kb/ts3221

Help: Confusing FRM-40505 error

I am working a FROM based on stored procedures. This error occur on actual test DB login. However, if I login from my own DB space, the error does not occur.
Notice: I put exactly same SPEC and BODY of stored procedures in my DB space as well as in test DB.
Any clues?
Thank you in advance.
Jimmy

From the Forms-Help:
FRM-40505: ORACLE error: unable to perform query.
Cause:     Processing error encountered. The table associated with the current block of the form might not exist, or your username might not have authority to perform the specified action on the table.
Action:     Pressing [Display Error] provides more information, if it is available. You can also try to update or delete this record later. If necessary, contact your DBA.
Level:     >25
Type:     Error
Try to issue the Forms-Builtin DISPLAY_ERROR to display the wrong statement. It could be missing grants or synonyms on your test DB.
Peter

[HELP] VBA Currency NumberFormat Error - Excel

[HELP] VBA Currency NumberFormat Error - Excel
Hello,
I've a worksheet with many cells formated as currency and i want modify the currency format through a combobox,
First i use this code to get the inicial currency type/format,
Private Sub ComboBox1_DropButtonClick()
inicial = Me.ComboBox1.Value
Select Case inicial
Case "EUR"
oldFormat = "#.##0 €"
Case "GBP"
oldFormat = "[$£-809]#.##0"
Case "USD"
oldFormat = "#.##0 [$USD]"
End Select
End Sub
The oldformat variable is a global variable,
Public oldformat As String
After that i want to do a find using oldformat variable and a replace using a newformat variable,
Private Sub ComboBox1_Change()
Dim ws As Worksheet
Dim newFormat As String
'On Error Resume Next
newValue = Me.ComboBox1.Value
Select Case newValue
Case "EUR"
newFormat = "#.##0 €"
Case "GBP"
newFormat = "[$£-809]#.##0"
Case "USD"
newFormat = "#.##0 [$USD]"
End Select
'Set rNextCell = Application.FindFormat
For Each ws In ActiveWorkbook.Worksheets
Application.FindFormat.Clear
Application.FindFormat.NumberFormat = oldFormat
Application.ReplaceFormat.Clear
Application.ReplaceFormat.NumberFormat = newFormat
ws.Cells.Replace What:="", Replacement:="", LookAt:=xlPart, SearchOrder _
:=xlByRows, MatchCase:=False, SearchFormat:=True, ReplaceFormat:=True
Next ws
End Sub
I read the new value through the user choice on the combobox.
But this not work at all, the variables oldformat and newformat receive the correct values but i got a error on,
Run-time error '1004': Application-defined or object-defined error
Application.FindFormat.NumberFormat = oldformat
Application.ReplaceFormat.NumberFormat = newFormatIs there any way to pass the newformat and oldformat value to the Numberformat property?
Or someone have another away to do this?
Link for exemple file,
https://www.dropbox.com/s/sdyfbddxy08pvlc/Change_Currency.xlsm
I apreciate any help, i m a little bit new on .
I apologize if there are any errors in English, is not my natural language.

The number formats must already be present in the workbook, otherwise you'll get the error that you mention.
The code for US$ is [$$-409]
Here is the code:
Public oldFormat As String
Private Sub ComboBox1_Change()
Dim ws As Worksheet
Dim newValue As String
Dim newFormat As String
newValue = Me.ComboBox1.Value
Select Case newValue
Case "EUR"
newFormat = "#,##0 €"
Case "GBP"
newFormat = "[$£-809]#,##0"
Case "USD"
newFormat = "#,##0 [$$-409]"
End Select
Application.FindFormat.Clear
Application.FindFormat.NumberFormat = oldFormat
Application.ReplaceFormat.Clear
Application.ReplaceFormat.NumberFormat = newFormat
For Each ws In ActiveWorkbook.Worksheets
ws.Cells.Replace What:="", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, _
SearchFormat:=True, ReplaceFormat:=True
Next ws
End Sub
Private Sub ComboBox1_DropButtonClick()
Dim inicial As String
inicial = Me.ComboBox1.Value
Select Case inicial
Case "EUR"
oldFormat = "#,##0 €"
Case "GBP"
oldFormat = "[$£-809]#,##0"
Case "USD"
oldFormat = "#,##0 [$$-409]"
End Select
End Sub
See https://www.dropbox.com/s/ax20vnmjpjny3h6/Change_Currency.xlsm
Regards, Hans Vogelaar (http://www.eileenslounge.com)

HELP!! Disk0s3: I/O error

Similar Messages

Maybe you are looking for