HELP! display format issues with training

HELPPPP!!!!
I am testing this training that I created on my laptop in
Captivate 3. On my laptop (15"), the display size is perfect.
However, when I check the training on a larger monitor (21"
widescreen) the display size is larger cutting off the playlist bar
(eg. play, stop, back, etc...). To make it worse, their isn't a
scroll bar to go down.
I tried changing the resolution but the display screen
remained constant through all tests. Can anyone please help me?
THANK YOU SO MUCH IN ADVANCE

Any chance you can post a screen shot?
Steve

Similar Messages

Uk date format issue with ASP and Access Database

I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Steve

stevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

W540 and Ultradock Display Port Issue with Monoprice 27" Monitor

Hi,
I have been troubleshooting an issue with my W540 and Ultradock for over a month now.
The issue is that the display port will not recognize my Monoprice 27" monitor. This same monitor was working previously with my W520 and a different dock (ThinkPad Mini Dock Plus Series 3) through the same display adapter. The current monitor will work on the DVI port, but I obviously can't get the full resolution of the monitor without the display port adapter.
So far I have tried:
1) Updating the drivers of the laptop
2) Updating the drivers of the dock itself to 2.22
3) Power cycling the monitor with the PC connected, not connected, etc.
4) Switching between Standard/Advanced mode in the BIOS
5) Nearly every iteration of monitor detection in the screen resolution settings
6) Changing cables, adapters, and display ports
What is different in my scenario (based off of the other issues I've seen with the Ultradock and W540) is that the monitor is never even detected under any circumstance through the display port. Device manager never sees it, nor does the normal monitor detection procedure.
Any help would be greatly appreciated.
Best,
Austin

Any ideas?
I am about to throw this in the trash... It's now defaulting my DVI port monitor to 640x480 without the option to change it.
Moderator comment: Post edited to conform with the Community Rules. Keep it clean.

Mail formatting issues with 1.1.1 update

With the 1.0.2 firmware HTML-formatted e-mail displayed correctly, if a bit too small to read, just like web pages do. Just like web pages, I could double-tap on - say - a table or a bit of text to zoom in and/or use pinch gestures to zoom in and out.
Now when I look at the same e-mails that looked so good in 1.0.2, my iPhone re-formats and re-flows the e-mails into gibberish, kinda like PocketIE does on Windows Mobile. One e-mail (a hotel registration confirmation) had the header re-flowed into 60 or 70 lines of one character each. The daily status messages I get from my SBS2003 server - which were completly unreadable on my old XV6700 with WM5 - looked great on 1.0.2. With 1.1.1, the tables are scrunched up, many text fields have a second or third line with one or two characters on them, ect.
Anyone else notice this? It's annoying enough that I'm almost willing to give up the other 1.1.1 features to get my mail working right again.

Solved the problem with bit locker (and refresh and reset and a couple of other things that rely on the windows boot manager by reinstalling windows (went to Windows 10). That also solved my issues with high Cpu when playing YouTube videos and photoshop crashes due to the fact that Windows 10 loads the latest Intel drivers.
Unfortunately the issue of Bluetooth mouses freezing still happens, though only twice yesterday, so that's an improvement.

2 Formatting issues with HTML forms

I have a couple of issues that we can't seem to get past with adobe livecycle designer 7.0. We have an internal form, rendered in HTML, that is emailed between departments, and the data entered is stored in an XML file that is created using the code similar to the following:
protected void doPost(HttpServletRequest request,
HttpServletResponse response) throws
ServletException, IOException
oOutput = response.getOutputStream();
try {
FormServerWithXML fsb = new FormServerWithXML();
fsb.processForm(request);
File file = File.createTempFile("Form_", ".tmp", new
File("d:\\xmlFiles"));
BufferedWriter(new FileWriter(file));
out.write(fsb.getXMLString());
out.close();
When we use a numeric field and try to format it with any display pattern containing dollar signs, decimals, etc... the xml data for that field isn't being written to the xml file. All of the other fields are being written properly.
The next issue we're having is that with HTML forms, when we create a multiline text field we are unable to limit the number of characters that are allowed in the field.
I'm pretty new with this, so please send some advice my way if you have any.
Thanks,
Chad

Thanks Rakhi, but that did not resolve my issue. Below is new out as per the thread suggestion and this is not what I wanted.:
"<H>Thank you for choosing Enterprise.</> We look forward to seeing you at 9:00 am on Monday,
November 28, 2011. This message is to confirm you have updated your reservation.
Following are the details for the updated reservation:
P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500
neighborhood locations."
- shalini

Formatting issues with "Justify"

I have a problem. I have a text field that ought to be justified and multiple paragraphs or a list of items will be entered into the text field.
However, it appears the last line of each Justified (flush left and right) paragraph is spread across the text field, resulting in a very ugle display in the PDF (see below).
Are there any known work arounds for this? Do I have an issue with my settings? Is this a bug?
Any help or insight would be appreciated.
Thanks, Mike

Hi Prash,
Throw this into a text object at the bottom of your dashboard and check the enable HTML option.
It'll left justify ONLY the view selector drop down box.
Cheers!
-Joe
<script type="text/javascript">
var leftJustifyVSelector = function (debug,align){
     if (debug === 1) { document.write("Begining leftJustifyVSelector function"+"<BR>");}
     // Get all view selector objects
     var vselectors = document.getElementsByTagName('td');
     if (debug === 1) { document.write("Get the TD elements"+"<BR>");}
     if( vselectors == null){
          // Couldn't find a view selector
          if (debug === 1) { document.write("No view selectors available"+"<BR>");}
          return;
     // Otherwise loop through them and align them to the left
     if (debug === 1) { document.write("Looping over the view selects"+"<BR>");}
     for ( var view =0; view < vselectors.length; view++){
          // check if this is not a view select class TD element
          if ( vselectors\[view\].className == null ||
               vselectors\[view\].className == undefined ||
               (vselectors\[view\].className != "VSelSelector")){
               // Not a view select TD
               if (debug === 1) { document.write("Not a view selector TD. Continue."+"<BR>");}
               continue;
          // We must have found a view selector change the alignment property
          vselectors\[view\].align=align;
          if (debug === 1) { document.write("Done setting the align property to left"+"<BR>");}
leftJustifyVSelector(0,"left");
</script>

Data display Format issue.

Hi ,
I have the following columns for a single item(SingleVO),
ItemNo, SugQty, OrdQty, Description,
I would like to display the data in a table(Normal table or in a Advanced Table) with the
following format. If there are 50 items, First row should display the First Item's
itemno, sugqty, orgqty and the secondrow should display the description of the first item and third row should display the Second item's itemno, sugqty, orgqty and the fourthrow should display the description of the second item ....etc.
Column Names:
|-------------------------------------------------------|
|Itemno |     SugQty     |     OrdQty     |
|-------------------------------------------------------|
|<---------Description--------------------------------> |
|-------------------------------------------------------|
Data:
|-------------------------------------------------------|
|12344 |     63 |     60     |
|-------------------------------------------------------|
|<---------Dulux Paint No2----------------------------> |
|-------------------------------------------------------|
|12345 | 98     |     100 |
|-------------------------------------------------------|
|<---------Table set ------------------------> |
|-------------------------------------------------------|
I tried with advanced table merging functionality, i couldn't get this type of display.
Pointers are appreciated.
(Since we are doing this application for Mobile devices we need to get this kind of display)
Thanks.
With Regards,
Kali.
OSSI.
Format change.
Message was edited by:
Kalimuthu V
Message was edited by:
Kalimuthu V

Thanks Ranjit,
We build the table dynamically using rows and columns with the required spans.
So that we could achieve the same display format.
Thanks.
With Regards,
Kali.
OSSI.

FCP and Motion formatting issues with DVCPro 50?

The material is DVCPro 50 NTSC 48khtz. (Item properties indicate that I initially digitized it properly.) My sequence settings are DV50 NTSC 48khtz.
I wanted to create a vignette effect so I exported my clips as a Quicktime (current settings) sequence to Motion. When I was done there I exported the sequence from Motion back to FCP as a DV NTSC movie.
Some of the Motion effected clips will play, look great and then all the sudden I see a black band appear on the East side of the frame. I can stretch it in Motion some but it just degrades the image so I'd rather not.
I'm surely grateful if someone can steer me in the right direction here.

Thanks for the workflow tips and suggestions. I backtracked to my original sequence and found the problem originates there. I have narrow black lines on both sides of all these clips. Since I resized a few clips with moves, I didn't recognize the problem. Now that I'm closer the root of it, any suggestions?
By the way, these problematic clips are intercut with no problem library footage that was also shot on DVCPro 50 and I took in on the same deck.
I cruised the forum for any occurence of a similiar issue and most replies seem to suggest a formatting issue. I don't get it since I think I have everything set up correctly. As a precaution, I also tossed out my preferences using FCP Rescue 5.
Welcome to the discussions, splotch.
Not sure what is causing this, but I might propose an
alternate workflow. Have your clips on the timeline
as you wish, ctrl/right click on them and select
Send To Motion.... Click the
embedded and open Motion ticks, give it a name, then
continue. Do your work in Motion, save, quit, and
fall back into FCP. Your clips may lose their
"anamorphicness" on their round trip, but just
ctrl/right click on the clip and select Item Properties/Format..., then
click on the anamorphic button.
Try this and see if you are still getting the same
problem...
Patrick

HELP!! Issue with mailto button in PDF

Hi
I have a button in a PDF form that attaches default email (LOTUS NOTES) when clicked. I have my settings in IE set to Lotus Notes as my default client and also in Lotus Notes I have the same settings.
The form however does not work sometimes when the button is clicked, nothing happens. It works fine for me but doesn't on another computer with the same settings.
Is this an issue with the PDF or Lotus Notes? If so any suggestions?
Thanks

Hi
Both machines are running windows XP SP 3
I have done some google-ing the issue but I didn't get any useful information.
I tried it on the second computer again and it says no 'email exits'
Any help on why this is happening will be very useful.
thanks in advance!!

Help please! Issues with Superdrive.

I was ahving huge issues with my MBA these past days. Now I was able to boot with the OS X dvd and reinstall the OS. the installation went well, but now I have an eject symbol in the upper right corner of the system bar and it seems my USB port is either fried or locked. I can not use any other USB devices (wanted to hook up to my external HD to backup all my stuff and then zero out my MBA and clean install). its strange. I can restart the MBA pressing C and then the Superdrive runs. Guess this speaks against the USB port being fried.
Would appreciate any help given soon!!

Sorry if this is too basic and you have tried it but here goes:
to eject the superdrive select the icon for it on the desk top (with the s-drive connected) then press and hold down the eject button on the keyboard upper most right on keyboard.
You may even need to have the disc in the drive but I doubt that.
Or go to iTunes or Finder, select the drive and eject from there.

Need help for formatting issues

Hi all,
I have sap script, tried to display the item table in Main window but the formatting issue occurs.
There are eight columns and define the tab positions also for same but still not able to solved.
Any suggestions welcome,
Regards,

Thanks for reply,
Formatting issue occurs like :
Serno City/State Dept Customer# Material Weight Quan Invoice
1 Delhi DL PRO 1232121 MAT 10 22 33323
it comes like this but not coming to correct places.
If more info needed then post it again .
Regards,

Help solve these issues with the n97

Owner of a black N97. Software ver.: V.11.0.021(.238.01) - 19.06.2009
Type: RM-505
The issues I have.
1. The alarm clock sometimes goes off 3-4-5 min, later than it was set. Ex. set alarm for 8am, and it goes off at 8:04, 8:05.
2. Contacts. Prev. I had the E50. I have all my contacts now in the N97's mem, so no numbers/contacts are on the sim card. The problem. I have a contact that has multiple phone numbers. When I get a call from the person neither the name or the picture assigned to her will show up, just the number. **bleep**? 600 euro phone
3. I left the phone to charge at night. I wake up in the morning it shows 2 bars. I restart the phone it shows fully charged (7 bars).
4. Laggy orientation issues, sometimes the phone can't make up it's mind in what mode it should be.
5. Sometimes the keyguard switch doesn't do it's job, have to slide it 2-3 times. For example, you have the screen locked. You slide the camera's protective cover. You use the keyguard switch.... once, nothing happens. You have to slide it again (2-3) times so it finally unlocks the screen/keys.
6. Once I turned on the cam, video mode, lights on (used the phone's leds as a ligh in the night, walked for about 10 min. like this and the next thing I know when I want to turn it off.... the phone doesn't respond, freezed up, had to turn off, and when I did I had the nokia logo and an ugly red line across the screen, turned it back on, worked again....
Sorry if I ask/talk about things that have been discussed/solved before.
Hope to get feedback from someone on the issues I have especially for the contacts issue and if maybe somebody could tell me what dimentions does the caller id image should be so that I have no issues with it?
Thanks in advance.
(PS: Despite the issues I ran into even after I updated from v.10 to v.11 I like the phone and I really hope that newer software updates will solve the issues we have. BTW I advise you all not to use themes. Altho I am a big customization fanatic myself, my old E50 teached me a lesson. If it's not nokias shipped with the device theme, it's gonna cause you problems. No more will I install and use custom themes. It just makes your phone crash and do very very weird things. (and the themes I used were from babinokia not just some hillbilly site). One of my big dissapointments with the E50 was that I could not change / set a custom image as fullscreen wallpaper. It only showed a cropped version of the image on the middle of the screen. In order to change the wallpaper u had to find a theme.)

Upgrade to V12? Might help on some issues.
As for the contacts problem, I can report that it works fine for me, and I have several numbers on most of my contacts.
This problem is usually because the same number exists on more than one contact. Unfortunately I haven't found a way to actually search for which contacts might have a number, so the only sugegstion I can offer is that you search through every entry in your phone book, and see if you can't find the same number on more than one contact.
Don't forget to also check the entries on the SIM card, especially if you have set th phone to use both phone and SIM.

Book Module format issue with Blurb

I uploaded a book to Blurb with two separate 2 page spreads filled with one photo across the two pages. This first photo appears mismatched with the right side being slightly smaller than the left side. The second photo appears with properly matched sizes.
When I export the book as a PDF both images are cooreclty sized and aligned. Have tried my book creation & upload on windows 32 bit and windows 64 bit. Same results.
Is there any solution to this glitch or some sort of work around?

trshaner wrote:
Essentially there is only one Blurb.icc file and its paper type agnostic.
No such thing really. Profiles must take paper into account. Like you, I have that swatch book and measured each. They are all over the map in terms of their measured values for paper and worse, OABs. One size doesn't fit all but can if you don't mind suboptimal to really poor results!
My guess is that the single Blurb.icc profile is actually the Blurb Standard paper profile.
It isn't even a blurb standard paper profile, it's based on GRACoL which I'm fairly certainly isn't what they are producing on all those papers given the standards. What they are doing is supplying a profile for soft proofing that has no bearing on the output to make those who feel they kind of, sort of understand color management and want to soft proof feel better. If you owned an Epson printer and output to Luster paper, how would supplying a profile for that printer but based on Matt work out? Not well. This is akin to the silly photo lab, RGB workflow where you are given an output profile you can't use and told to send sRGB. Rather pointless but if it makes the user feel that by soft proofing they've done something useful, better than a sharp stick in the eye.
Based on sending the same images to differing vendors who produce books using Indigo (at least for the inside of the book), Blurb is far from best in class in my experience. And for B&W, on top of all the issues I've outlined, even the best shop is going to have issues with the Indigo screening which produces crossover in terms of color over the press sheet. That alone is a problem unless HP has updated their screening as they have promised for some time. Dead nuts neutral is hard to do!

Date Format Issue With Sharepoint DateTime Control

I Have a Web part where in create child control I am creating my controls.
Where I have SharePoint date time control and I want to change the format of the control on change in the browser languages settings.
Currenlt I am doing it by setting localID of the control as DateTime.LocalID=Thread.CurrentThread.CurrentCulture.LCID.
But it is not working , It always take UK format.
Please suggest ....!!!!
Thanks.

Check this
http://www.matdesmarais.com/2011/12/changing-the-date-display-format-in-sharepoint-2010/

SAP Query format issue (with ABAP list)

Hi All,
I had a requirement to remove all unecessary formatting and text from a SAP query report which can be read by a third party software system. We need only Header line and report data (spaced by Tab).
I have removed all formatting from the report and changed the output format from "SAP list viewer" to "ABAP list" .
The issue is that the report shows material number with 12 digits in output but when we download to file then it adds extra six "0" and makes the Material Number field as 18 digit.
we have already maintained new length as 12 againts the standard length 18 for material number(under field output option)
Please suggest how to get rid of extra digits generated during downloading.
Please help,
Thanks,
Rohit

Hi Brad,
Currently we execute query with SQ01 and from the output screen the user direclty saves the file as "local file..."
The output format is "abap list". We are able to get the exact format but the only problem is with material number. I cant make changes in the program. Is there a way to download it without changing the 12 character ( as displayed on the report output)
Thanks for help.
Rohit

HELP! display format issues with training

Similar Messages

Maybe you are looking for