Help documents for APIs that are to be used to write our own apllication

Hi,
Iam using SUP 2.1 ESD#1 licensed version,
There are no help documents for the APIu2019s that are to be used to write our own application, so can some one provide me with some docs.
Thanks,
B.Ushasri

They are available online... what platform are you writing for? I'm assuming youre writing a Native app?
Ian

Similar Messages

I have a number of old 3.5 floppy that i'd like to convert to a format that can be read by my iMAC. These are all Word documents for MAC that are as old as 20 years. Do you have suggestions other than the conversion services that are rather costly?

I have a number of old 3.5 floppy that i'd like to convert to a format that can be read by my iMAC. These are all Word documents for MAC that are as old as 20 years. Do you have suggestions other than the conversion services that are rather costly?

I don't think any conversions are needed, just get yourself an external USB 3.5" floppy drive and drag the documents onto your iMac's HD. You should be able to locate one on Ebay or maybe even Amazon. To open them you will need something that reads .doc files like Pages, MS Word for Mac etc..

Help Document for Keyfigures and Characteristics

Hello,
Using BEx Browser I'm generating reports so i need to create help documents for Keyfigues and characteristics that way user will know by looking documentation they will know what is what
How can we create help documentation?
Experts help would be appreciated
Thanks

actually we are using BI7.0 version but we don't have portal and web that is the reason we are using old BEx browser for front end but ETL we are using BI7.0.
so using old BEx browser can we create documentation for keyfigures or not?
if so How?
Thanks

FOR CUSTOMERS THAT ARE NEW TO THE RAZR / RAZR MAXX

This is a Quick Help Guide for ones that Have the New Razr /Razr Maxx an it Freezes or Locks Up? b33
What should I do if my phone freezes or locks up?
In the unlikely event that your device becomes unresponsive, try a force reboot.
Press and hold the power key + volume down key for 10 seconds to perform a force reboot on the device.
Note: Data on your phone will not be deleted.
There are a few things that might be causing your phone to freeze or act sluggish. It is important to pay attention to how often handset has this behavior when troubleshooting. Consistent screen freezes that never go away even after power cycle might be signs that repair is needed or that the handset might need to be reset.
Keep in mind:
Your handset can be sluggish initially after power up, so make sure handset has time to register with your cellular network and load up applications and widgets before being concerned.
Pulling up attachments from Emails can take up to minute or so to come onscreen.If screen or handset operations are freezing often, try the following to correct the issue: Make sure you have the latest software installed. The latest software release will always ensure you have the latest performance enhancing updates for your DROID RAZR MAXX phone. You can check to see if your phone has the latest software by following the steps below:Checking for the latest software For more information on latest software updates, visit www.motorola.com/mydroidrazr and click on the link undersoftware updates and drivers. If you continue to experience issues, performing a Factory Data Reset.Factory Data Reset is a tool used to remove everything that was imported, added or installed on the device. Keep in mind, when using this feature everything is deleted. Nothing stored on the MicroSD or the internal phone storage will be affected unless you choose to erase it as well.Factory Data Reset
Turn the phone off and then on, let handset settle in idle mode for several minutes and then repeat activity prior to freezing to try and duplicate issue.
Make sure your battery is fully charged.
If you recently downloaded any item before the sluggish behavior, such as a game or application, try to uninstall the item.
Touch the app tab, in the home screen to open the app menu
Tap Settings.
Tap About Phone.
Tap System Updates.
If there is a software update available, select Update to download the latest software release.
From the screen of your phone, press the Menu button
Tap Settings.
Scroll down and tap Privacy
Tap Factory Data Reset
Check Erase internal storage if you would like to erase all the data on the phone internal storage such as applications, music, movies or photos.
Tap Reset Phone
Details

Thanks for the info regarding the latest update. I like some of the new/improved options, however I am highly disappointed that the update discontinued the reminder option. I would think that setting a program reminder is a highly used feature and many will be unhappy now that it is gone. I know I surely am!

Office 2013 - Excel 2013 - "This action is only valid for products that are currently installed."

I had Office 2010 starter and Outlook 2010 installed. I recently purchased the Office 2013 click to run version (paid monthly subscription) and installed Office 2013. After installing 2013 I noticed that when I opened up Excel files they would
still open in Office 2010. I uninstalled Office Starter 2010 and uninstalled Outlook 2010.
I then manually fixed the file associations for Word, PowerPoint, Publisher and such, however I could not manually fix the Excel file association.
Excel documents show the correct icon however when I double click on them the following error appears "This action is only valid for products that are currently installed."
I have used the Office 2013 repair process, I have uninstalled and reinstalled Office 2013, I have manually uninstalled office 2013 using KB 2739501 (
http://support.microsoft.com/kb/2739501/en-us ) and I still can not open Excel documents.
Recently I found that I can not do mail merges either using Excel documents as the data source and I believe the two items are related.
Any suggestions?

Hi,
Please try to turn off compatibility mode and then check the issue again. To do this, please follow:
1. Open this folder location:
For Windows 32-bit: C:\Program Files\Microsoft Office\Office15
For Windows 64-bit: C:\Program Files (x86)\Microsoft Office\Office15
2. Find Excel.exe, right-click it, and choose Properties.
3. Click on the Compatibility tab and ensure that all of the boxes are
un-checked.
For more information, please refer to this:
http://support.microsoft.com/kb/2674519/en-us
Thanks,
Steve Fan
TechNet Community Support

My mail forms created by muse 2014.0.1.30 do not work. PHP 5.4 is enabled by hoster, so they should work. Can anyone help me, for these forms are crucial for my business.

My mail forms created by muse 2014.0.1.30 do not work. PHP 5.4 is enabled by my hoster, so they should work. Can anyone help me, for these forms are crucial for my business. The forms confirm delivery, but the mails are not recieved. No spam filters enabled.
Meanwhile, I was able to narrow the problem down: PHP seems not to accept a re-directed mail address as sender of the mail in some cases. So, it has nothing to do with the mail form itself.

Hi Ingo,
Please refer to this document, Troubleshooting Muse Form Widgets Used on Third-Party Servers
Last section, "I've uploaded my new Muse form, and tried submitting it in the browser, but I never receive an email with the form data. What's wrong?"
- Abhishek Maurya

"this computer is no longer authorized for applications that are installed

"this computer is no longer authorized for applications that are installed on the ipad "name of ipad" Would you like to autoriize for items purchased from the itunes store?
if you do not autorize ....
Why am I getting this message I only have 1 computer the ipad connects to, it hasnt changed so why do I suddenly have to autorize it again????

I've gotten the same issue now on my ipad.
My mac mini is authorized. I only have ONE itunes account. I sync my original ipad today and I get this message. So i say sure authorize, even tho it is. Enter login and password, comes back with this computer is already authorized. I knew that but ok. hit ok. Up pops message that this computer is no longer authorized, blah blah blah. Ok ill try again. Authorize credentials entered. Get message that computer is already authorized. Itunes is most recent 10.2.1. Ipad is updated to 4.3.1.
I deauthorized computer and reauthorized it. Still get loop.
google for solutions, find lots of problems, no answers outside of reinstall itunes and it "might" work, but not for everyone. Not gonna do that yet.
Figure Ill call, I mean its not that an old a device and its surely a bug in the software, I havent changed a single thing since I last synced and only tried got the sync message when i plugged it in to update the OS.
/rant on Go through a gazillion voice prompts and question, finally get operator and he'll help me if i spend 80 or 30 bucks depending on the service program I want. Yah know thats just total #$%@.
How about some customer service eh? How about posting a solution to the forums. If you dont have one, at least tell people that.
I get the same bit of attitude when I walk in the apple store. Love the products, have been an apple user since the IIe, but I just want the products I bought from you, the software that I get from you, the music that I buy from you, the apps that I buy from you, etc etc to WORK with each other.
/rant off
has anyone seen a solution for this.

HT1386 Hello, When trying to sync, I get the following message. This computer is no longer authorized for apps that are installed on the iPhone "Terri George's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

while trying to sync with my iphone I recieve the message: This computer is no longer authorized for apps that are installed on the iPhone “Terri George’s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store? When I put in my password and hit authorize, I get a message telling me there was an unknown error (-50). Would love to sync today. Any help would be appreciated.

The -50 error is documented in this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Here is a synopsis:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

TS4006 Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.

Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.

If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

Change Menu for People that are logged in

I have a header made for people that are logged in, showing their name, the logout option, as well as the usual things such as home, profile, search, etc.
But I also made a header for the people that are not logged in. It shows only the logo as well as the form to flll in email and password.
I would like to make it in php so that when someone comes to the site or signs in it checks
If the user is logged in
show header_logged_in
show content
show footer
If the user is not logged in
show header_visitor
do not show content (instead I have a page that tells the visitor to sign in or sign up)
show footer
But I'm not sure how I would code this to where it knows whether or not they are logged in, and how to keep the content hidden from those who have not yet.
Any help would be really appreciated. Thanks ahead of time.
Mike

Hi Mike,
Without knowing more about how users login and out I can only give you an example of how it's done.
This uses a session variable check then includes
<?php
session_start();
if ( isset ($_SESSION ['$login_status']) ) {
include 'header_logged_in.php';
} else {
include 'header_visitor.php';
?>
It's a basic example but there you have it.
If you give some more details a more accurate answer can be given.
Hope that helps anyway.
David

'this action is only valid for products that are currently installed'

hi im new to discussion groups so i might be a little slow... i came aross a problem a couple of days ago where when i clicked on itunes this came up'this action is only valid for products that are currently installed' im not really sure what to do about it!i have tried to uninstall it but it wont let me i have also tried to install a new itunes but it gets stuck and never finishes the install. i have done some research on the net about it and i think it may have occured due to deleting mcafee of my computer however there are no solutions to this problem.
can anybody help?
thanks!

Every time I try to open iTunes a pop up opens
that says "This action is only valid for products
that are currently installed."
that's actually an installer error equivalent
to the InstallShield 1605 error:
Error 1605: This action is only valid for
products that are currently installed
... when you go to launch itunes, are you opening it
via the start menu, or are you clicking on a desktop
icon? if you are clicking on a desktop icon, what is
it called, and what does the icon look like?
Never Mind! But Thanks any way

Why does Apple charge for Apps that are FREE? That's my concern.

Why does Apple charge for Apps that are FREE? That's my concern.

Free means Free....
As both Johnathan and Demo have indicated, if it says Free there is no charge associated with it. If you upgrade to a "Pro" version, or if you do in-app purchases, then it is no longer free....but when you initially install the app, you do not pay anything if it says "Free".
And "Yeah? I'll show you" does not help us to understand what you are talking about. If you want help, then provide specifics and we will help you to figure out your misunderstanding.
Cheers,
GB

Why am I still getting this message after logging in - This computer is no longer authorized for apps that are installed on the iPhone "Myron Liptzin's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?

Click here and follow the instructions.
(71175)

When i pluged in my ipod,computer start scanning,it says"your computer is no more authorized for app that are installed in"yadav ipod",would you like to authorizes this computer for item purchased from itune" what should i do to fix this problem,,,

when i pluged in my ipod,computer start scanning,without finishing scan,it says"your computer is no more authorized for app that are installed in"yadav ipod",would you like to authorizes this computer for item purchased from itune" what should i do to fix this problem,,,

What the message says. In iTunes g the the Store tab in ther upper part of the screen and then clink on Authorize this computer.

When syncing iPad to MacBook Pro itunes says "this computer is no longer authorized for apps that are installed on the ipad" . When I enter my id and password it tells me the computer is authorized.

when syncing iPad to MacBook Pro itunes says "this computer is no longer authorized for apps that are installed on the ipad" . When I enter my id and password it tells me the computer is authorized.

http://support.apple.com/kb/TS1389

Help documents for APIs that are to be used to write our own apllication

Similar Messages

Maybe you are looking for