Help :Domain controler crash, how to connect to other server behind
Dear all,
I get my DC controller server which has crashed. it is server 2008 r2.
begind it I have an other server which runs virtual machines running TFS and CRM server 2011.
What is the easier way to get access to my other server as temporary solution for my users ? we have only 3 users.
I know that I can detached my other server from domaine but then how my users will be able to login the second server by passing the crash DC ?
Thnaks for your help
Hi wakefun,
Thanks for your feedback and sharing. Your time and efforts are highly appreciated.
Best regards,
Justin Gu
Similar Messages
-
How to connect MS-sql server with SAP BW
hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful... -
How to connect to iPad server for email
How to connect to iPad server to get email
What do you mean by "iPad server"? Who is your email provider? To add an email account to your iPhone, see Settings>Mail, Contacts, Calendar>Add New Account. If your email provider is not one of the listed ones, you may need to get specific settings from your provider.
Best of luck. -
Fatal1ty / Front Panel HD Audio - please help me figure out how to connect!
Please help!
I bought a SB X-Fi Titanium Fatalty Pro card and I can't for the life of me figure out how to connect to front panel audio!
My motherboard audio has an HD Audio connector, is there a way to enable routing the sound through that?
If I can't get the case's front?panel?working at all?then I need some kind of super long headphone wires or something!Check your online manual (it's in the Creative folder in Start Menu).
There should be a schematics like this: (mine is in portuguese).
Conector de áudio do cabeçote do painel frontal
Compatibilidade de conexão
Somente padrão Intel HD Front Panel Audio.
Não compat*vel com AC97 ou HD Front Panel Audio compat*vel com Intel
Configuração de Pin
Pin
Nome do sinal
Descrição
1
PORT 1L
Porta analógica 1 - canal esquerdo (Microfone)
2
GND
Aterramento
3
PORT 1R
Porta analógica 1 - canal direito (Microfone)
4
PRESENCE#
Sinal baixo ativo que sinaliza ao BIOS que um dongle Intel HD Audio está conectado ao cabeçote analógico. PRESENCE# = 0 quando um dongle Intel HD Audio está conectado
5
PORT 2R
Porta analógica 2 - canal direito (Fone de ouvido)
6
SENSE1_RETURN
Retorno de detecção de conexão para o painel frontal (JACK1)
7
SENSE_SEND
Linha do sensor de detecção de conexão da rede de resistores de detecção de conexão CODEC Intel HD Audio
8
KEY
Chave do conector
9
PORT 2L
Porta analógica 2 - canal esquerdo (Fone de ouvido)
10
SENSE2_RETURN
Retorno de detecção de conexão para o painel frontal (JACK2) -
How to connect to remote server with jmx from jvisualvm
I have a WL 10.3.2 domain running on a single box. The adminserver and managed server are running on the same box, on different ports (7001 and 8001, respectively).
I have a Spring application deployed to the managed server and I've configured it to register a Spring bean as a JMX mbean.
When I run this entire configuration on my laptop, I can run jvisualvm and connect to my server and see and manipulate my registered mbean.
I'm having trouble figuring out how to get a remote connection working, however. I want to run jvisualvm on my laptop and connect to the remote server.
I first did "Add Remote Host", where I specified the IP address. It appears that this was created successfully, and it apparently was able to determine the DNS name for it.
I then tried to add a JMX connection. In the "Connection" field, I just entered the IP address followed by a colon and 8001 (managed server port number).
In the "Use security credentials" section, I entered the weblogic admin principal and credentials.
When I click OK, it chugs for a while and eventually gives up, saying:
Cannot connect to [email protected]:8001 using
service:jmx:rmi:///jndi/rmi://nn.nn.nn.nn:8001/jmxrmi
What might I be missing?I've resolved this. At least I was able to configure an authenticated connection. It doesn't use SSL yet, but I'm ok with that for a while.
Resolving this only required changing the command line parameters for the managed server, and being aware of the "jmxremote.access" and jmxremote.password" files. The following blog article helped a lot: [http://www.dzone.com/links/r/monitoring_your_java_application_with_jmx_part_2.html] .
I'm now passing the following command-line parameters:
-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=8888 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=true
The default "role" configured in "jmxremote.access" is "controlRole", and the "jmxremote.password" file specifies the credentials for that principal. I simply used that principal and credential in JVisualVM, and the connection succeeded.
And I just used the "host:port" form, not the protocol form.
Edited by: david.karr on Feb 4, 2011 12:47 PM -
How can connect to oracle8 server(install in RedHat6.0)
I have installed Oracle Standard Edition 8.0.5.1
in RedHat6.0 . Now I can't connect to it with Windows95
client.
get an ORA-12500 error.
1. successful start Oracle use "dbstart"
2. successful start the LISTENER use "lsnrctl" -- 'start'
to /home/oracle/805/network/log/listener.log
Listening on: (ADDRESS=(PROTOCOL=tcp)(DEV=6)
(HOST=xxx.xxx.xxx.xxx)(PORT=1521))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=magic.com)(PORT=1521)
(COMMUNITY=UK_SUP_TCPIP))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for linux ......
Start Date 23-FEB-98 20:38:50
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security OFF
SNMP ON
Listener Parameter
File /home/oracle/805/network/admin/listener.ora
Listener Log
File /home/oracle/805/network/log/listener.log
Services Summary...
xoracle has 1 service handler(s)
The command completed successfully
LSNRCTL> exit
nullHi Sushama,
Seeburger AS2 Adapter supports the SFTP using PI
Have you checked this threads
Help needed for SFTP on Seeburger
How to connect SFTP from the XI
Regards
Ramesh -
How to connect to external server using router from VLAN's
Hi, I am newbie. I am trying to build network system in Packet Tracer.
Now I have such network layout.
I have different VLAN's Accounting and Sales. I have configured this using subinterface in router to allow computers from different vlan's communicate with each other. Everything works.
Let's assume that there are next subnets and VLAN's. Acct. VLAN (2) (ip's 172.168.0.1-172.168.0.254/24) and Sales VLAN (4) (ip's 172.168.1.1-172.168.1.254/24).
But I need to connect all this computers to the external server. That has ip , for instance 192.168.20.13/24. Like this.
I don't know hot to correctly configure router to make it possible for computers to connect to this server. I have connected switch to the another router interface. And than connected server to the switch and specified ip 192.168.20.13/24. Than I tried to set ip to the router interface from the same subnet like 192.168.20.22/24. So now router can communicate with server.
But how to allow computers to communicate with the server. Please help. I am newbie.
I would be grateful for any help.Hi Androgen,
One question for you..How does the sales VLAN computers communicate with the accounting VLAN machines? It's through the inter-VLAN routing that you have already setup.
Communicating to the external server is also similar to this.
The computer's in the VLAN should be configured with the default gateway IP which is the the L3 sub-interface IP for that subnet.
Also, the external server needs to have a default gateway to communicate with other remote subnet. The default gateway of that server would be 192.168.20.22 which is the L3 interface for your external subnet.
CF -
How to Install VPN and how to connect client Application server
Hi All,
Could any one tell me. How to connect Client's Application server and How to Install VPN. Thanks in advance.......
Thanks & regards
Vardhanwhere r u working?
ask your help desk to give the URL link to down load vpn
after downloading install it, its just like a wizard
you need to give your userid and password , and secureid number
secureid is a small device which displays a number(say a 6 digit number ) this number is keeps on changing for every one minitue.
you need to enter the number which is displaing while you are trying to connect to vpn.
in the middle of connecting to vpn if your secureid number changed , you need to login once again by the same procedure -
How to connect to SQL Server from Forms 10g?
Hello all,
How do we connect to SQL Server database from Forms 10g?
In Oracle Metalink site they have suggested using Transparent Gateway for SQL Server as a solution.
But is there a way we can connect directly to SQL Server from Forms using an ODBC connection
without installing anything on the database server?
Pls help!
Regards,
SamHello all,
I was able to connect to SQL Server from Oracle using Generic Connectivity (HSODBC).
Transparent gateway was not required.
Followed metalink note 109730.1
So, after I created a dblink to SQL Server, I created a synonym for the dblinked SQL Server table.
When I used the synonym as the table source in Oracle Forms, I got the following error while querying.
"ORA-02070 - ROWID is not supported in this context."
This is because Forms has an invisible ROWID field and when data is fetched from SQL Server table
no Rowid is fetched since SQL Server table doesn't have one.
Is there a way to overcome this issue or do we have populate the block manually using a SQL query ?
Pls suggest.
Regards,
Sam -
How to connect the SQL Server?
1.How can I communicate between SQL Server and Discorverer41 via Oracle Gateway?
2.Does the Discoverer41 connect SQL Server without Oracle Gateway?
Thanks for help!
K.Lunga) You can connect via ODBC-Database Link.
b) You can create an EUL direct on SQL Server.
regards Holger Reinbold -
How to connect oracle application server portal to MS access DataBase
Hello,
I am facing one problem here.
Our client is having their database in MS access and they want to implement the oracle application server portal for their organization then how to connect the MS access DB to oracle Application server portalThere is a worked example of how to connect oracle to an Excel spreadsheet, which is easily modifyable to read from an Access Database.
http://asktom.oracle.com/pls/ask/f?p=4950:61:::::P61_ID:4406708207206#18830681837358
I had some concurrency problems - only one person could use the link at any one time, so I used it to load the data into oracle tables.
Tak -
How to connect a CVS server with remote Hosts(NWDS7.0)
Hi Frndz..
I installed CVSNT server in one machine n itz workiing fine with that NWDS in that machine , now i want make connect that CVS server from remote machines NWDS's to use that CVS server as a central repo'
Can anyone guide me how can i connect that server from remote machines thru NWDS.
Thnaks in Advance
Regards
Rajeshrajesh,
did u check this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d079e754-8c85-2b10-8b9a-b36db5262122
Thanks
Bala Duvvuri -
How to connect a remote server in my local pc?.
I have a code to connect my server in visual basic 6.0 code, my sap version is 2007 A.
Private Sub ConnectToCompany()
'// Initialize the Company Object.
'// Create a new company object
Set oCompany = New SAPbobsCOM.Company
'// Set the mandatory properties for the connection to the database.
'// To use a remote Db Server enter his name instead of the string "(local)"
'// This string is used to work on a DB installed on your local machine
oCompany.Server = "(local)"
oCompany.language = ln_English
'// Use Windows authentication for database server.
'// True for NT server authentication,
'// False for database server authentication.
oCompany.UseTrusted = True
ChooseCompany.Show vbModal, Me
End Sub
but I want to connect my remote server and I didn't. Do i forgeting something??... I changed "(local)" for my name remote server or my local Ip for remote server. But maybe my user name windows for autentication. there is Someone who can help me please. Which one is the correct data I need??hello freind
i think yu are missing company usernsme,password,db type like this code
private void Connect()
try
Cursor = System.Windows.Forms.Cursors.WaitCursor;//Change mouse cursor
oCompany = new SAPbobsCOM.Company();
oCompany.DbServerType = (SAPbobsCOM.BoDataServerTypes.dst_MSSQL2008);
oCompany.Server = Properties.Settings.Default.ServerName.ToString();// change to your company server
oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English; // change to your language
oCompany.UseTrusted = false;
oCompany.DbUserName = Properties.Settings.Default.UserID.ToString();
oCompany.DbPassword = Properties.Settings.Default.Password.ToString();
// Set connection properties
oCompany.UserName = txtUSer.Text;
oCompany.Password = txtPassword.Text;
oCompany.CompanyDB = Properties.Settings.Default.DatabaseName.ToString();
//Try to connect
lRetCode = oCompany.Connect();
if (lRetCode != 0) // if the connection failed
int temp_int = lErrCode;
string temp_string = sErrMsg;
oCompany.GetLastError(out temp_int, out temp_string);
// u.action_status("Connection Failed - " + temp_string, this);
if (oCompany.Connected) // if connected
this.Text = this.Text + " - Connected to " + oCompany.CompanyDB;
CheckUser();
Cursor = System.Windows.Forms.Cursors.Default; //Change mouse cursor
catch (Exception) -
How to connect to lined server in SSMS in SSIS connection manager
Hi,
In SSMS (Server name is sqlssisdw1), I have one (SQL Server)linked server name sql4. in that linked server there is DB called rptdb
Now using SSIS I want to use tables in that DB rptdb.
So for this I want to create Connection manager, but for this when I select 'New OLEDB connection' and in that in 'Server Name' when I wrote 'sql4' it is not giving me list of DB. I also tried giving sqlssisdw1 in server name and see if I can see this
rptdb but I can't.
Can you please tell me how can I connect to lined server in SSMS in SSIS connection manager? Thank you.
VickyHi ,
if you are already having access and login credentials to the remote server which is configured in sql4 , you pretty much directly connect to that server from the connection manager instead of going through a linked server. If you still want to connect
through the linked server , you need to establish the connection for SQL Server sqlssisdw1 and then
use a 4 part name query to access the rptdb tables as like below
SELECT * FROM SQL4.rptdb.<schemaname>.Tablename
Best Regards Sorna -
How to connect to SQL Server (Non-SAP) in SAP R/3(Unix)?
Hi, All..
please, help me.
I am ABAPer.
I already read the text for connect DB.
but, I am not clear.
my system is,
- Source : SAP R/3, Oracle DB, Unix(OS)
- Target : Non-sap, SQL Server, Windows 2000
I want to connect to SQL Server by EXEC SQL.
Waht's BC(Basis) Jobs?
Thanks, all.Hello,
have a look at Note: 323151.
Regards
Gregor
Maybe you are looking for
-
WHY CAN'T I LOGIN TO MANY WEB SITE WITH FIREFOX BUT CAN WITH INTERNET EXLORER 8 AND GOOGLE CHROME
I just installed firefox 3.6.8 on a new computer, it worked fine for a few days but now I cannot login to several sites that require usernames & passwords. (citezens bank online, (chase freedom credit cards online) medco mail order prescripions onlin
-
ITunes has stopped working. Problem with iTunes Helper Module
After i installed the 7.3.1 iTUNES update for my windows VISTA, i keep getting iTunes has stopped working, and a message saying there is a problem with iTunes Helper Module.. I've tried to re-install and everything.. Can anyone help me out?
-
SQL to group the records and apply logic to pick one record from each group
Hi Friends, I am looking for a query to group the records on certain columns in a table and then from each group I want to pick only one record based on certain rules. May be having data laid out will make my point more clear to you. Here you go : CR
-
No puedo configurar el organizado​r
Al tratar de configurar el organizador desde el desktop software me envia un error desconocido de intelli y no puedo configurar las opciones a configurar. ¿ Que debo hacer para resolver esto?
-
MSDTC on Windows 2012 Standards edition
Hello Friends, We have migrated our Prod server to Windows server 2012 Standards editions. and enabled MSDTC but still getting below error Error :- 1. The MSDTC transaction manager was unable to pull the transaction from the source transaction m