HELP . . DOMAIN LOGIN AND PASSWORD

I just purchased a toshiba computer which I hate. I'm trying to get on internet explorer and I keep getting a log in which says connecting to 062d-gni-wfe-pri-vip-spoded.com. . .asking for log in and password which I don't know.
How do I find out what the login and password are?

Hi,
Do you mean that IE is automatically redirected to the webpage and inform you to type a name\password which you don't know? Are you able to connect to other webpages? Please check whether the internet connection is fine. Some ISP might inform you to enter
an credential if you want to gain internet connection via IE.
If the webpage is not set by ISP and you even don't know why it occurs, then I would recommend you run a virus scan in case malware\virus infection.
Or open IE, check the homepage, please also check IE proxy setting under internet option\Connections\LAN settings.
Or Lanch IE in no add-ons mode, check the result, run iexplore.exe -extoff
to launch IE in no add-ons mode.
Yolanda Zhu
TechNet Community Support

Similar Messages

Why do my firewalls only use the domain username and password for login and enable passwords, not a different enable password like my switches do? The RADIUS config looks the same...

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
Issue:
Cisco firewalls require only one level of password i.e. the domain username and password are used for both logging in as well as reaching global configuration mode.
Background:
We have multiple Cisco network devices set up which authenticate to our Windows domain controller using NPS (Windows 2008 R2). The switches we have set up all function exactly as we would hope as they require your domain username and password to login to the device. They then require a separate password when you use the enable command, this is stored in Active Directory:
Switches:
Username:domain-username
Password:domain-password
SWITCH>enable
Password:enable-password-in-Active-Directory
SWITCH#
Firewalls (as they currently are):
Username:domain-username
Password:domain-password
FIREWALL>enable
Password:domain-password
FIREWALL #
With the firewalls however, they require your domain username and password first, and then your domain password again when using the enable command. I want the firewalls to use the enable level password that the switches currently use instead of the domain password again. The current configuration look like the following:
Current switch configuration:
aaa new-model
aaa authentication login default group radius local
aaa authentication enable default group radius enable
aaa authorization exec default group radius local
aaa session-id common
radius-server host 192.168.0.1 auth-port 1645 acct-port 1646
radius-server source-ports 1645-1646
radius-server key 7 1234abcd
Current firewall configuration:
aaa-server DC01 protocol radius
aaa-server DC01 (outside) host 192.168.0.1
aaa authentication ssh console DC01 LOCAL
aaa authentication enable console DC01 LOCAL
key 1234abcd
Any help would be great, thanks!

Cisco ASA works that way by design. You could remove "aaa authentication enable" and then you could use the "enable password" command to set your enable password.
But if you do that, then ASA would change your username to "enable_15". That would break Authorization and Accounting if you're using them. Let me clarify with an example
Firewalls :
Username:domain-username
Password:domain-password
FIREWALL>show curpriv
Username : domain-username
Current privilege level : 1
Current Mode/s : P_UNPR
FIREWALL>enable
Password:enable-password-from-running-config
FIREWALL #show curpriv
Username : enable_15
Current privilege level : 15
Current Mode/s : P_PRIV
If you're using Authorization and Accounting it's recommended to stick with your current behavior.

I am trying to run page 192.168.0.170 for my IP Cameras but after login and password the page is not responding. Plz help!

I am trying to run page 192.168.0.170 for viewing IP Cameras but after login and password the page is not responding. Plz help!

I am trying to run page 192.168.0.170 for viewing IP Cameras but after login and password the page is not responding. Plz help!

After installing new OS i can't type a login and password because the font is not supported. DO NOT KNOW WHAT TO DO!!!!HELP PLS?!

after installing new OS i can't type a login and password because the font is not supported. DO NOT KNOW WHAT TO DO!!!!HELP PLS?!

Hello Pete from another old guy,
It sounds like you have an older iMac than the 2006 and newer model this forum covers. The problem is that, in 2006, Apple changed from PowerPC to Intel processors and third-party developers soon stopped making new software for the older processors. That's why you cannot upgrade Flash player--the current version requires a Mac the "2006 and later" processor.
However, not having a current version of FlashPlayer should not affect your ability to download. If you try downloading, do you get an error message or does something else happen?
Do you have another web browser like FireFox or Camino on your computer?
but would love to get my MAC back up to date and running right.
Well, "running right" may be doable but "up to date" may not be. You are already at as high a Mac OS level that a pre-2006 Mac can use. We need to pin down your variant to make recommendations. From your Apple menu at the left end of the menu bar, do "About this Mac":
That brings up this window:
Let us know what yours say for "processor." The two choices are "PowerPC" as in the example, or "Intel." If you have an Intel processor, you have more options available.
Awaiting your report,
Allan

TS1389 Help! My computer is authorized to play my itunes purchased songs but it keeps prompting me to authorize one song that I purchased. Once I type in my login and password it tells me that the computer is already authorized but it still won't play t

My computer is authorized to play my itunes purchased songs but it keeps prompting me to authorize one song that I purchased. Once I type in my login and password it tells me that the computer is already authorized but it still won't play the song

im having the same problem so how is this suppose to help

How to hide login and password transported in interface ?

Hi !
        In the current project that I´m working, the customer is developing a website in .Net and intend to use XI to communication between website and ECC 6.0. One of their needs is to create an interface to call a RFC in ECC 6.0 to validate login+password provided in the website(they created a Z table to persist login data, and a RFC to receive login and password and check in this table).
        My problem is, to solve this situation, I would use a simple sincronous interface but, the login+password information will be logged into monitoring screens of XI, and it´s not desireble, so I´m finding a way to hide this information.
        Initially, I was thinking to make 2 adapter modules, 1 to be used joined to the Sender SOAP Channel that will be used to the website call, that could get the data send by the website and encrypt it, to be sent to the XI pipeline encripted(only the fields login and password), and the 2nd to be used joined to the RFC Receiver channel, to decrypt login and password to be sent to the RFC call. Another alternative that I found was to use the MessageTransformBean and XLST mapping + java, but I´m looking for another alternatives.
        Somebody knows if there are some way to achieve this(hide some information in a message being processed by XI)?
        In time, I can´t to disable the logging of syncronous interfaces, because it´s customer requirement.
        Any help is welcome !
        Thank you in advance, and best regards,
        Wilson

Hi !
        I have solved the problem.
        I used to develop 2 adapter modules, one to intercept the message arriving to SOAP Sender communication channel, encrypt the content of parametrized fields(in the module tab of the comm. channel) and deliver the updated message to the processing chain of the comm. channel.
        This message is so processed correctly by the XI pipeline, and delivered to the RFC Receiver Comm. Channel. I developed another adapter module to receive the data sent to the receiver RFC Comm. Channel, decrypt the contents of parametrized fields(like the another module, parametrized in the module tab), and deliver the updated message to the processing chain of the comm. channel.
        After some tests, I verified that the message doesn´t remain logged unencrypted into XI(I checked Message Monitoring for Adapter Engine at Runtime Workbench, and the SXI_MONITOR trn).
        Like mentioned by Jaishankar, the SOAP Adapter initially didn´t accepted the module adapter that I wrote following the stardards existing in several documents about adapter modules here in SDN, but after some research, and debbuging sections of the adapter module, I achieved to develop the correct code to work.
        Thank you for your attention, and best regards,
        Wilson

No CD, can't change admin login and password???

Hi...Please help. I do not have a startup disk and cannot change the aministrator login and password...what do I do?

Hi skyjac, and a warm welcome to the forums!
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... though I was just thinking, this new User probably shouldn't be the same name as an existing one.
If that doesn't work for you (and some users have reported it has not worked for them), try Niel's procedure Making the Setup Assistant reappear.
http://discussions.apple.com/thread.jspa?messageID=607547
I lost my admin user (Mac OS X 10.4 and earlier) ...
http://discussions.apple.com/thread.jspa?threadID=121786&tstart=0

How to get safari to remember login and password after I said do not remember

I went to a website through Safari and logged in and accidentally hit Never remember for this site and now I cannot get safari to remember the login and password. I have gone through preferences/passwords and the site is not listed and it will not allow me to add a site. I would love help with this since I log on to this site just about every day! Any suggestions?

It might be a corrupted keychain ...
Open Keychain Access located in HD > Applications > Utilities
Open Keychain Access then select Passwords on the left.
Right or control click a keychain then click Delete.
Back to Safari. Login to the website you want the password autofilled.
Click Yes when prompted to save that data to a new keychain.
Keep in mind, not all websites espcially financial institutions allow the autofill feature.

Creating a login and password in the forms

I have been trying to create a username and password to access the database that I have created using Form Builder. This is the code that I have created....the syntax is correct but its not performing the task i.e direct the user to a different form
DECLARE
LOGINNAME VARCHAR2(20);
PASWORD VARCHAR2(20);
BEGIN
IF LOGINNAME = 'CSR' AND PASWORD = 'CURRIE'
THEN
CALL_FORM ('C:\ClothingCloseout\Menu.fmx');
ELSIF
LOGINNAME = 'MGMT' AND PASWORD = 'SANDRA'
THEN
CALL_FORM ('C:\ClothingCloseout\Menu.fmx');
END IF;
END;
I also tried using the same login and password through which I get connected to teh database but that does not work either....Thanks for the help!!!

Hi Ashley,
The compilation is successful because there are no syntax errors. When the code is executed depends on where you have put this code (On-Logon trigger, etc).
In this situation, it looks like the 'code' has not been executed YET because the event has not been triggered OR it has successfully gone through ie - the IF test for loginname and pasword was not satisfied. Therefore, the call_form was never performed. (Your code does not prompt the user to input 'Loginname' and 'Pasword'). In this case, loginname and pasword are NULLs.
Regards,
John

Conference link with login and password included

Hi,
I have been trying to find a way to make Adobe Connect send meeting invitation e-mails with login and password included in the link - unfortunately to no avail.
Does anyone know, if it's at all possible to do it and if so, how it's done?
I'm still on a trial version, but I've been assured, that it shoudn't be a problem.
Thanks in advance for any hints!
Kamil

OK, I played with it and here is how I got it to work:
Appending the URL:
The URL would need to be appended with /?login=username&password=password. The "api/xml?action=" string was incorrect. I verified that this does work.
The full URL would look similar to this: http://realeyesconnect.adobeconnect.com/bestroomever/?login=myusername&password=drowssap
The login can also be done programmatically.You would need to do the following steps to get the log-in to be automatic.
Log the individual into the server:http://YourServerURL/api/xml?action=login&login=username&password=password
Should return a value of OK
Get the BREEZESESSION cookie for the user:
http://YourServerURL/api/xml?action=common-infoShould show a value similar to this:<cookie>na3breezr59qzu2pp2qy4zdm</cookie>
Log the user in to the room with the cookie:http://YourServerURL/RoomLink/?session=na3breezr59qzu2pp2qy3zdm
Guest names can also be added to the url link. These options are described here: http://help.adobe.com/en_US/connect/9.0/webservices/WS5b3ccc516d4fbf351e63e3d11a171dd2d4-7 ff4_SP1.html

Workspace- login and password

Hi
I am having problems logging onto workspace and reporting studio..I have got 9.3.1 version installed on my laptop..Shared services is working properly..
I had been using the same "admin" and "password" for all of them..But, now a days, when I try to log on to workspace using the same login and password, it pops up a message reading "invalid user id or invalid password". can any one pls help me sort this problem...
Thanks

You might want to try bouncing Shared Services and Workspace.
I occassionally have trouble with my VM if I don't shut down properly.
Regards,
Cameron Lackpour

ISE - ISE-1.3.0.876-eval-2.ova login and password

I downloaded the following ova file, but couldn't find any documentation for login and password.
ISE-1.3.0.876-eval-2.ova
- login and password
Any help will be greatly appreciated. Thanks,

It's an ova file. When I run it, it shows already installed and asks for a login and password. As mentioned in the download site, it is an evaluation installation for 100 devices.
I could not find any document on this file - ISE-1.3.0.876-eval-2.ova.
Please let me know, if there is any document that provide a login and password for this ova pre-installed software.

Adobe AIR Flash application - fill login and password

Hi,
I have Adobe AIR desktop application, which show login form. It is necessary to fill login and password after execute. I would like prepare external application in C# or in Adobe AIR Desktop. My application should executed Adobe AIR Desktop application and fill login and password to text input and press button "Login". I try to use Win32 Api but it is not possible to get handler on input elements. I am nowbie in AIR Desktop. It is possible to get handler to external Adobe AIR Flash application in Adobe AIR application and fill text? I try to find any function for communication with window of external application, but I can not find anything. Can you please help me?

64bit support will be in the next (v. 16) sdk release and is currently available in beta:
http://labsdownload.adobe.com/pub/labs/flashruntimes/shared/air16_flashplayer16_releasenot es.pdf

When i try to log in to places like facebook and other places that need a login and password it always goes back to a clean screen and requires you to login again..i have a mac pro 2014

Help please...I can't login to anything....facebook....ipiccy....I can get into websites but if it asks me for my login and password just boots me out.

login implies encryption, and encryption requires the date&time be within five minutes of perfect. ¿Is the date & Time set correctly?

Captive Wi-Fi network not saving login and password

Since yesterday my iPhone 5S stopped asking if I want to save the login and password information when start a session on a captive Wi-Fi network. The settings Safari>Passwords & Autofill is on and Safari isn't in Private mode. It was working until yesterday and had the option to automatically fill in when I touched the login field.
Any help would be greatly appreciated. Thanks
iPhone 5S - iOS 8.0.2

Well, I tried to duplicate what you talked about. I have my wireless here at home, and I chose, "Forget this network" and when I went to rejoin, it asked for a password. Many public networks take their username and password through the browser. Have you tried to open Safari to see if it will default to the username/password screen? I've used mine at hotels that change their access every 24 hours and if I try to log back on after the time, it defaults back to the login screen. That is the only solution that I can think of. And yes, if you go to settings and reset network settings, it will clear all of them.

HELP . . DOMAIN LOGIN AND PASSWORD

Similar Messages

Maybe you are looking for