Help! Don't know how to upgrade my Safari : (
Hi...when I try to go to certain pages using my Safari (AOL for example), I'm told that the technology isn't supported by my current browser and that I should download an updated one. I don't know what to download though...I have the MAC OS X 10.2.8 version. I tried to download a couple things through Apple, but they never ended up working. I know this is probably very simple, but can anyone help me please? Thank you!!!
Hello,
Safari, along with most all Apple software that ships with the computer will get it's updates from the Software Update. Found in your System Preferences.
To see if updates are available, open Software Update and click "Check Now".
Other than that, you can largely ignore the message generated by the web site. This is typically an error that is passed to the web browser as it has been coded to a specific browser, usually IE.
By ignoring this, you MAY see parts of pages differently than if you would on IE, or parts may not function at all.
A good site will conform to the World Wide Web Consortium standards so this does not happen. The problem lies in the fact that people have made web functions that are browser specific.
There are other browsers available for Mac OS X. I like Safari but also use FireFox, Opera and IE.
Beavis2084
Similar Messages
-
Help - don't know how to change this...
Being a novice with my BB curve I keep playing with it to learn and this morning I went into contacts and had the option of "personal or business"; I clicked on personal and now can't get to my contacts because there is nothing listed uder "personal" and I don't know how to change it back plus I must have saved the numbers to the phone because it says my sim is empty and I didn't keep records of my numbers OMG HELP PLEASE!!!!!!!!!
Mate, just found this in another thread and it worked!!!!!
See how you go!
Hello,
I managed to fix it this way:
Settings > Mail, etc - remove your iCloud account
Settings > iCloud - check iCloud account is removed
Settings > iCloud - add your account using the e-mail address you want to use (I wanted @me but was getting the .mac error because I set up my account in 2007 with a @mac address, so I added with @me address)
let it do its thing
Settings > iCloud > Account - my Apple ID shows as @mac but when I scroll down my 'Mail' shows as @me and I am able to send e-mails again!
I hope this helps you guys out. I think it would be great if Apple would allow people to merge their @me.com and @mac.com addresses into one of their choice to avoid confusion both for us and their servers! I also had iMessage trouble because of this. -
I don't know how to open the tool bar and address bar. it only shows the cancel,minimize and maximize icons
If you have a program like GoodReader you can transfer the files over your wireless network. Also you will have the ability to view all types of files. You can transfer the files within iTunes if you have a program installed that can read it. Go into iTunes, attach your iPad, click on your iPad and then click Apps tab scroll down to the bottom to File Sharing, you will see a list of Apps on you iPad that you can transfer file to. Select an App and click the add button then select your PDF file.
-
I got a macbook pro in august 2011 and don't know how to upgrade to lion, supposed to be free
Hey all-
I bought my macbook pro in August 2011, about three days before OS x Lion came out. I was told I would be getting a free copy of lion, but didn't know how to get it. Any help on how to get it?! I know it's a little late, but this was something I paid for and should get.start here
http://www.apple.com/osx/uptodate/ -
Plz help don't know how to create a query and link it to a UDF
hi,
i am new to business one and however hard i am trying to use a query to link it to a UDF, it is not working. i think i am doing the whole thing wrong,so ill just post one problem i have and if any one of u can explain to me in steps i may be able to learn to link other queries and UDFs.so plz help me out .
problem:
i want to display the account balance of every customer/vendor whenvever i open a marketing document. i have created a UDF for the marketing documents in the title with name and description 'account balance'.
Now how do i link the customer/vendor name field to this UDF so that the query generated will show the account balance of the corresponding customer/vendor.plz tell me in steps as to what tables to choose ,what fields to choose, what conditions and relatoins to use in a query wizard
thank youhi,
A/R invoice
for name UDF:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode]
for balance UDF:
SELECT T0.Balance FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode]
A/P invoice
for name UDF:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $[OPCH.CardCode]
for balance UDF:
SELECT T0.Balance FROM OCRD T0 WHERE T0.CardCode = $[OPCH.CardCode]
FOR OTHER FORMS ONLY CHANGE THE END OF THE QUERY FOR Example
$[OPCH.CardCode]
OPCH is the table name, change it to other table.
save the query and set it to customer code for refresh in A/R invoice
save the query and set it to Vendor code for refresh in A/P invoice
regards
sandip -
Need Help, Don't Know How To Add Content
www.collegiateboard.com/main.html
I want to add text or an image below the sidebar1 (below, Click the Demo link if you want to mess around before posting)
Is there a way to add text there but I want it to be kept white. Meaning I don't want to extend the grey box lower. I want the grey box to stop there and add new text in the white area below it.
I would appreciate it if anyone can help me.This forum is for questions regarding HTML5 (a new web specification).
For general HTML or CSS layout questions, please visit the Dreamweaver General Discussion forum (see link below).
http://forums.adobe.com/thread/793650?tstart=0
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
HT4759 I have OS X Lion 10.6.8 and I don't know how to upgrade the 10.7.4 for Icloud.
ICloud - I understand that I need OS Lion 10.7.4, but I can't find if I can upgrade from 10.6.8 which is what I have. Can anybody help me?
You have to buy it from Apple online.
Installing Lion: Our complete guide - http://www.macworld.com/article/161064/2011/07/installing_lion_complete_guide.ht ml
OS X Lion: Installation Guide, Boot Discs and Q&A - http://www.macstories.net/mac/os-x-lion-installation-guide-boot-discs-and-qa/
Make sure your computer can run it:
To get more information about your computer, go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
Compare with:
System requirements for OS X Lion and Mac OS X v10.6 - http://support.apple.com/kb/HT4949
Make sure you want to run it:
Lion and Mountain Lion application compatibility - http://roaringapps.com/apps:table -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Changed from macbook to Mac Pro (FCPX was upgraded) and don't know how to restore projects.
Hi,
Now I'm in trouble.
I was working last year with a MacBookPro and FCPX.
Everything nice and well.
I dediced to upgrade to MacPro, so I did a "backup" of all my Events and Projects folders of the MacBook Pro, and waited for the MacPro arrival...
Now when the MacPro downloaded the software, it has a newer FCP version and I don't know how to restore my old projects.
Could somebody help me to know where to restore my old projects and events? (it was a lot of job done to loose it now).
Thanks in advance.Don't worry. It is more than worthy to upgrade to the new FCP X 10.1.1.
Plus, the process of updating your projects and events to the new version, which uses libraries, is pretty straightforward.
Before you proceed, I recommend you read up
here:
http://www.philiphodgetts.com/2013/12/upgrade-your-events-and-project-to-fcp-x-1 0-1-libraries-the-better-way/
and follow the video tutorials in
http://www.rippletraining.com/fcpx-features.html
and then come back if you have more questions. -
Hi, I have a old IPod Nano, rarely used. I don't know how to download a podcast to it. Can anyone help me?
You will need both License Keys the Lightroom 4 upgrade key and the Lightroom 3 key. You can download the latest LR 4.4.1 from the site below. Just make sure you get the appropriate one for your operating system.
Adobe - Lightroom : For Macintosh
Adobe - Lightroom : For Windows
Install then you first enter the LR 4 upgrade serial number and then the LR 3 serial number when prompted. -
I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...
Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?
-
Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem:
Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
If I know the song title I can select the songs tab and find the song that way,
I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
Thanks for your helpTry assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.
I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
iPad User Guide for iOS 6
iPad User Guide for iOS 7 -
iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help
It is likely a hardware failure
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1 -
Hi. This is my first time posting. My Macbook Pro with Os X Mavericks has been running super slow since before I installed Mavericks so I'm pretty sure it's not the OS that has the problem. It runs slow even if only one app is open, especially if it's a browser, particulary google chrome. If mail is open...forget about it, down to a crawl. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)
P.S. - Also, it sounds like something is loose inside my mac. How should I proceed?
Thanks in advance.
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 23:21:37
Disk Information:
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (603.2 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.leapfrog.driver.LfConnectDriver (1.8.0 - SDK 10.7) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Problem System Launch Agents:
[loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.leapfrog.connect.shell.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.sophos.uiserver.plist Support
[running] org.chromium.chromoting.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
Activity Monitor
Dropbox
Google Drive
younity
EvernoteHelper
Internet Plug-ins:
o1dbrowserplugin: Version: 5.2.4.18058 Support
nplastpass: Version: 2.5.5 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.2.4.18058 Support
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
Slick Savings: Version: 1.0
Slick Savings: Version: 1.0
Surfon: Version: 1.2.2
Pearltrees Extension: Version: 6.0.13
Mindomo Bookmarks: Version: 1.0
Ebay Shopping Assistant: Version: 1.1
Zootool: Version: 0.7
Amazon Shopping Assistant: Version: 1.1
Pocket: Version: 1.7.1
Searchme: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
TuneUp Visualizer: Version: 2.4.0 - SDK 10.6 Support
User Internet Plug-ins:
Picasa: Version: 1.0 - SDK 10.4 Support
3rd Party Preference Panes:
remoting_host_prefpane Support
Flash Player Support
Paragon NTFS for Mac ® OS X Support
Time Machine:
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 697.84 GB Disk used: 136.06 GB
Destinations:
NO NAME [Local] (Last used)
Total size: 3.41 GB
Total number of backups: (null)
Size of backup disk: Too small
Backup size 3.41 GB < (Disk used 136.06 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
6% Activity Monitor
5% WindowServer
1% InterCheck
1% sysmond
0% ocspd
Top Processes by Memory:
152 MB Finder
115 MB HelpViewer
111 MB mds_stores
86 MB InterCheck
57 MB WindowServer
Virtual Memory Information:
983 MB Free RAM
1.03 GB Active RAM
584 MB Inactive RAM
1.01 GB Wired RAM
17.41 GB Page-ins
222 MB Page-outsLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Maybe you are looking for
-
Lumia 720 camera gets bad after updating to Amber?...
Hi guys, I got the Amber Update for my 720 last night. It's a nice little update, except the camera seems to perform worse. The images always seems to be washed out and more blurry. in low light it takes (much) brighter photos, but also a lot noisier
-
Hey guys, So I've been trying to create an unauthorized set of samba shares, I've managed to allow a guest user to connect to the drives without authentication however files that I copy from outside the shares cannot be modified by my guest. Is it po
-
Error when Install Mac OSX 10.4
when i install MacOSX 10.4 .NO WORK . Jun 29 03:33:42 localhost : Launching the Language Chooser for an OS Install Jun 29 03:33:48 localhost : Found primary language hint "en" Jun 29 03:33:49 localhost : Language Chooser ready Jun 29 03:33:53 localho
-
Warning before emptying junk mail folder
I am not sure if this option is disabled by default in the latest Thunderbird(31.4.0) but I used to get a warning popup asking if I am sure I want to empty the junk mail folder. How do I enable the popup warning before emptying junk mail folder. Than
-
McAfee disabling / XP Security Centre 2012 Scarewa...
I've just had to do some major work to get over a big malware attack "XP Security Centre 2012". Really nasty one, disabled most of the functions on my PC under the guise of the normal XP Security Centre - literally it doesn't let you click on most of