Help don't know what to do, please someone help!

Well restarted my computer and ther it was, the dock was transperant and each time I open an app. they become transperant (somtimes)
http://farm2.static.flickr.com/1255/106967757058020380f2o.png
What should I do? already tried deleting the com.apple.dock.plist and restarting it so it would go back to normal but it didn't work. What do I do? PLEEEZ help nobosy knows what it is!
I used tinkertools btw. OMG PLEEZ help. Everythings fine on the other account on the same comp. PLEEZ help!

Actually, I suspect you did something with TinkerTool, anyway way back when I played around with it, when it was free, I seem to remember it allowed you to make the Dock transparent. So launch it, and go to its Help section and see what you can find.
Francine
Francine
Schwieder

Similar Messages

Hi! I can't save my projects to the creative cloud... When I try to upload them to the cloud it shows a message of no connection. I'm connected, so I don't know what to do, can someone help me?!

Hi! I can't save my projects to the creative cloud... When I try to upload them to the cloud it shows a message of no connection. I'm connected, so I don't know what to do, can someone help me?! I'm using Photoshop touch for iPad iOS 7 thanks!!!

No I was not!!! I had to answer a lot of questions after my first time at the cloud!!! Now everything is all right!!! Thanks a lot!!!!

HT3275 Time machine error, backup disk image "/volumes/data-1/.sparesbundle " already in use. I don;t know what this means, can someone help?

My Mac mini time capsule is showing an error Time machine error, backup disk image "/volumes/data-1/.sparesbundle " already in use. I don;t know what this means, can someone help?

I had a similar problem and I solved it as follows -
In Time Machine - > I deselected time capsule Data Disk as a destination.
Then I pulled the power plug on the Time Capsule, twiddled my thumbs for 15 secs, plugged the power back in.
Went back t Time Machine -> Re-Added the Time Capsule Data Disk as destination. And then tested by selecting Backup Now.
All went well and the backup picked up from before the problem.
BTW - I also have a USB drive connected to Time Capsule that is an alternate disk for Time Machine to backup.
In Mountain Lion the GUI lets you add more than one Time Machine backup destinations very easily so I think it a good idea to have redundancy.
Hope this helps.

My ipad screen has gone black but I can still touch the screen and unlock it and do things. I don't know what's wrong can someone help

My ipad screen has gone black and I don't know what to do the screen still works and I can still unlock it and I can still type. But I don't know what to do can anyone help me it will be much appreciated

If the reset doesn't do it then it's possible that the backlight or another part of your screen has broken. Unfortunately it's not really user servicible. I'd make an appointment at your local apple store and have them check it out. If your device is still under warranty and they don't determine that the damage was the result of 'abuse or neglect' (their words) then it could be a free replacement.
I'd just do a backup before you take it in, just in case.

Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don't know what to do, please help me?

Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?

Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?

Hello apple community i had just updated my iphone 4 to the newest ios version 7.0.6 and my iphone is getting no reception i don't know what to do please help me !!!!!!

hello apple community i had just updated my iphone 4 to the newest ios version 7.0.6 and my iphone is getting no reception i don't know what to do please help me !!!!!!

Hi Shohambox,
Please the first thing you should do is to restart your device. Go the sleep wake button and hold down on it for 4-5 seconds waiting for the 'slide to shut off' message to appear. Once the device is turned off go ahead and restart the device. If this does not resolve the issue then go to the area on the front of your device to the app that reads 'settings' from settings>general>reset>reset network settings. Clicking on reset network settings will not erase any data only will reset the network settings apart of your iphone., Once the reset has completed you will then need to go back to settings to wi/fi and plug in the name and password of your wi/fi prior to using it.
Good luck, Friend.

Yes my ipod touch 2nd generation 8gb wont turn on, i was on my way to my next class at school and it just randomly shut off, its been off ever sense and i don't know whats wrong, it had a good charge and i don't know what to do please help me

My ipod touch 2nd generation 8gb wont turn on, i was on my way to my next class at school and it just randomly shut off, its been off ever sense and i don't know whats wrong, it had a good charge and i don't know what to do please help me.

Try here:
iOS: Not responding or does not turn on

Ok I bought my iPhone 4S 5 months ago and these recent weeks I have had problems with the battery dying at 50% like completely shutting off meanwhile it has 50% battery I don't know what to do please help

Ok I bought my iPhone 4S 5 months ago and these recent weeks I have had problems with the battery dying at 50% like completely shutting off meanwhile it has 50% battery I don't know what to do please help

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

Hi...so ehmm... my password for my iPad 2 was in Greek...and I forgot to change it when I downloaded iOS 7.... so when I openned my iPad it wanted my password but...it hadn't greek keyboard...and I don't know what to do! Pleaseee help me!!!

Hi...so ehmm... my password for my iPad 2 was in Greek...and I forgot to change it when I downloaded iOS 7.... so when I openned my iPad it wanted my password but...it hadn't greek keyboard...and I don't know what to do! Pleaseee help me!!!

no you can't as iTunes requires you to go to the iPad and turn OFF find my iPhone
which you can't do as there is no greek keyboard to sign on with
in other words
NO greek keyboard -
requires the greek keyboard to resolve
well done Apple

Hi In India whenever i try to make calls it says call failed, it is happening since last three days dont know what to do , please anyone help..

Hi In India whenever i try to make calls it says call failed, it is happening since last three days dont know what to do , please anyone help..Its urgent as I am unable to make calls...

Sir thanx for your reply, I contacted the Mobile Carrier and they say everything is fine at their end and even the sim card works fine in other mobile, but not in my iphone 4

Dropped Ipod touch 4th generation in water, and I turned it on without knowing that it most likely never turn on again. I don't know what to do, please help me!

I dropped my ipod 4th generation in water, and I turned it on without knowing that it might never turn on again. I don't know what to do, pleae help me!!!

You could well be looking at a new iPod, but this will only cost you a couple of bucks, and a little time. Worth trying, but it maybe to late, (I just don't want to give you any false hope.) Turn your iPod off and leave it off, do not attempt to charge it or use until you dry your iPod out. Put it in a sealed bag of rice for at least 7 to 10 days. change the rice daily. If (and it's a "BIG" if) your lucky after drying the iPod it will start up when you turn on the power. You may need to charge it for at least 30 minutes to get some signs of life. If it does not turn on after charging attempt a reset, press and hold both the power and home buttons together for about 15 seconds until the Apple logo appears, then release both buttons. If your iPod turns on, check that all is working. If you get it to work the first thing you should be is back up everything on your iPod to your computer, no guarantee it will continue to work. Water does bad things to electronic toys. If it doesn't work your only out a couple of bucks, then it's time for new toys. You may want to look at replacing with a refurbished iPod, about 1/2 of new. Good luck.

I have attempted to download the free trial of Acrobat XI, the application file appears to be in the download folder however the setup progress bar was hanging so I cancelled. Now I don't know what to do, please advise

Please advise how I install the free trial of Adobe Acrobat XI Pro. I started the download process and can see the files in the Downloads folder however the setup screen was hanging so I cancelled. Now I don't know what to do. It goes back to the original download screen

Thanks Pat
I have now brought my daughters laptop into work as she has CS6 so I thought it would be easier to set up her laptop to the work network, set up an email account for her and attempt to email my 270 certificates that way. How wrong was I. First of all Acrobat X Pro would not open so I did a reinstall. Still wouldnt open so I had to find a patch to fix it. I can now open it. When I open Word 2013 and check the options, the PDFMaker is in the active section but when I open word the Adobe toolbar is not appearing. I've opened Acrobat X Pro and have discovered that it's missing a plugin - Convert2AdobePdf (DistillerPI.api) so I'm now in the process to find out how to install this plugin. I have seen through this site that there was a problem with Word 2013 and the Adobe Toolbar which is exactly my new problem. I have to say, after 3 days of trying to perform what you would think is a very simple function, I'm ready to just convert 270 individual pdf's and email them individually, I would have had the job done by now !

Every apple email I receive is in Japanese. I don't even speak Japanese. Please someone help me!!, Every apple email I receive is in Japanese. I don't even speak Japanese. Please someone help me!!

It also happens on my iPad and MacBook Pro because I use the same email address on them both. Please someone help me. It's only the apple emails by the way.

Your password was sent to your emergency email address. Perhaps you have an email you never use? I use the free email from my cable TV account as my emergency email.
Your Apple account and cloud account are separate. You could even have completely different user and password. Most of us use the same user ID and password, but they are not the same thing, don't mix them up.
If you can't retrieve emergency email, you will have to call apple support.
http://support.apple.com/kb/HE57

Error   1009 and I don't know what to do exactly, plz help me

hi
I wish that you could help me
I am a beginner in actionscript 3.0, and I have a main swf file, with a menu and several buttons, when I click on each button, a new swf should be loaded, and the menu is resized and goes to the top left of the page, and if I click on the menu, it should come back..
the problem is that when I click on the first button, everything works well, but when I click on another button, I get this error:
TypeError: Error #1009: Il est impossible d'accéder à la propriété ou à la méthode d'une référence d'objet nul.
    at s_fla::MainTimeline/s_fla::__setProp___id0__Scene1_texte_2()
    at s_fla::MainTimeline/s_fla::frame2()
I understood that the problem is due to the file which is displayed before it has been loaded.
I also found that I have to use the function Event.ADDED_TO_STAGE, but I don't know where to put it??
could you help me please?
here is my code:
function size(e:MouseEvent):void{
    menu_mc.gotoAndPlay(2);
    menu_mc.buttonMode = true;
    menui_mc.addEventListener(MouseEvent.CLICK, showmenu);
    menu_mc.button01_btn.removeEventListener(MouseEvent.CLICK, size);
    menu_mc.button02_btn.removeEventListener(MouseEvent.CLICK, size);
   menu_mc.button03_btn.removeEventListener(MouseEvent.CLICK, size);
addChild (cliploader);
function size(e:MouseEvent):void{
    menu_anatomie_mc.gotoAndPlay(13);
    menu_mc.removeEventListener(MouseEvent.CLICK, showmenu);
    menu_mc.button01_btn.addEventListener(MouseEvent.CLICK, size);
    menu_mc.button02_btn.addEventListener(MouseEvent.CLICK, size);
    menu_mc.button03_btn.addEventListener(MouseEvent.CLICK, size);
    removeChild (cliploader);
menu_mc.button01_btn.addEventListener(MouseEvent.CLICK, loadpage);
menu_mc.button02_btn.addEventListener(MouseEvent.CLICK, loadpage);
menu_mc.button03_btn.addEventListener(MouseEvent.CLICK, loadpage);
menu_mc.button01_btn.page = "file01.swf";
menu_mc.button02_btn.page = "file02.swf";
menu_mc.button03_btn.page = "file03.swf";
function loadpage(e:MouseEvent):void{
    cliploader.myldr.source = e.currentTarget.page;
please tell me what to do exactly
P.S: cliploader is a UI loader which is present on the scene
in my swf files, I have flvplayback which loads a flv files, and I think this is the source of the problem, because I have tried the same thing with a simple swf file which maybe loads quickly, and I didn't get this error
thank you in advance

thanks
I think that the error is in the file that I want to load, in this file I have a flvplayback that I named myplayer, which is in the third frame, and because the video doesn't stop even if I move to another frame, I had to add this code in the third frame
next_btn.visible = true;
prev_btn.visible = true;
myplayer.addEventListener(Event.REMOVED_FROM_STAGE, stopPlay);
function stopPlay(e:Event)
myplayer.stop();
myplayer.stop(); this is line 7 on frame 3
when I publish this file, it works
but when I try to play it from the menu in the main swf file I get the error, how can I fix it please?
can I make this manually, or I'll have the same problem?
as I said, I tried to load different swf files from the main menu and I didn't have this problem (because there were no video players), so I think the problem is caused by the video player?
thank you

My computer has a virus and I don't know what to do, Please help!

Everytime I open up the internet images and adds pop up and start moving around the page. What virus is this? And how to I fix it?

I'm going to assume that your browser is Safari. From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
If any extensions are installed, disable them and test.

Help don't know what to do, please someone help!

Similar Messages

Maybe you are looking for