HELP!!! Dreamweaver could not connect you to the remote server"
Hi all,
I have been struck by what seems a common problem with
Dreamweaver/Contribute.
I get this message when trying to “Enable Contribute
compatibility” in Dreamweaver:
“Dreamweaver could not connect you to the remote
server. You cannot perform Contribute administration tasks without
a connection to a remote server. Please fix the remote connection
before continuing.”
I have read that DW will try to write and delete a file to
confirm the connection… When I look at the FTP log of DW, it
confirms that the Temp file has been written and deleted.
So, it has in fact connected to the remote server...!
Things I have done to try to eliminate errors includes:
• Ensure Contribute is not open on the PC.
• Contacted my ISP to ensure that “/” is
the “Host directory”
• Modified the URL in each of the tabs listed below
Including the Base web address
Below are the settings I have selected in the Site definition
window:
Local info:
Local root folder: v\website\
Links relative to Document:
Http address:
http://www.website.com
Remote Info:
Access FTP
FTP Host www.website.com
Host directory /
Contribute:
Rollback enabled: Currently off
CPS enable Currently off
Site URL:
http://www.website.com
I have spoken to my ISP: www.webcentral.com.au
• They have confirmed that Contribute is used on their
products by other users.
• They also stated that they sell Sharepoint as their
CMS option
What other things can I try to eliminate this problem?
Hi,
Can you please try adding the DNS in your machine where DW
is running?
Steps to add:
1) In the Network Connections, right click Local Area
Connection.
2) Select Properties.
3) Select Internet Protocal (TCP/IP) and click Properties
button.
4) Select the radio button Use the following DNS server
addresses and provide your preferred DNS and Alternate DNS server
addresses.
5) Click Advanced button and select DNS tab in the Advanced
PCT/IP setting dialog.
6) Select the radio button "Append these DNS suffixes (in
Order)" and add the values and also add DNS suffix for this
connection.
7) Click ok and close all the dialogs.
Hope this helps.
Similar Messages
-
Error message saying iTunes could not connect you to the Music Store
error message saying iTunes could not connect you to the Music Store
Make sure your network connection is active and try again
someone help!!!!!!!!ya, im having the same problem 2, im not sure, maybe the systems down or something, if someone has connected to the music store in the last 12 hrs plz speak up.
-
"could not connect to this iCloud IMAP server" How can I find a solution to this message? I haven't changed any settings.
Hey irenes883!
Here is an article that can help you troubleshoot this issue:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I updated my Iphone 3gs to 6.1.3, after that m having this message:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
plz help me! what should i do now?You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
i bought an iphone 3g but not in a shop and when i turn it on it tells me your iphone could not be activated because the activation server is unavailable what can i do to just have it working legit ?? , please anyone that could help me out
Generally, that means the phone has been jailbroken (hacked). You can try restoring it as new using iTunes. Beyond that, there's really nothing we can advise as jailbroken phones can't be supported on these forums.
See also Lawrence's post in this thread:
https://discussions.apple.com/thread/5186252?tstart=0
Best of luck. -
I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to iTunes to activate it, or try again in a few minutes.
Where exactly did you get this phone?
Do you have a SIM in the phone?
There are 2 primary causes for this.
Either you don't have a SIM in the phone, which is REQUIRED to activate it, or the phone was hacked to unlock it. -
this is the message i am getting:
Your iPhone could not be activated because the Activation Server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a few minutes. If this problem persists, contact Apple Support at apple.com/support
nothing i can do to it
looked on forums, can't get to anything (flight mode, etc, etc)This usually happens if the phone has been Hacked / Jailbroken / Modified...
If this is the case... Then...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Why Jailbreak is Not Supported
http://support.apple.com/kb/HT3743 -
My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?
You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??
Hi Peter,
Thank you for the note - I have seen similar replies on other posting errors and I see how that could make sense. The thing is, my iPhone is not jailbroken - it is from an authorized distributor. However, when I told them about the "no service" problem on the sim, they were unable to assist. Then my phone messaged that an itunes restore was required - so I did that, several times, to the error message now noted on my post. I wonder if there is some other way to over-write this message? Thanks very much. -
I didn't have a signal so I restored my iphone 4s but this always comes up "Your iPhone could not be activated because the activation server is temporarily unavailable" HELP PLS!
Try this link for activation problems ...
http://support.apple.com/kb/ts3424
If you had iOS 7 BETA installed, just go to developer.apple.com and log in using your developer account. There are discussions about this issue. Otherwise... for non-developers, I'm afraid you're on your on. Use Google. -
I am having problems activating my daughter's iphone. It says " Your iphone could not be activated because the activation server is temporarily unavailable". It went on like this for several days already. She was trying to upgrade her IOS to IOS6. Help anyone?
yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries -
Im trying to setup my phone and I Keep getting this error.
"Your iPhone could not be activated because the activation server cannot be reached. Try Connecting your iPhone to iTunes to activate it, or try again later.Are you running one of the beta versions of iOS 7?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider? -
i delete my iphone from find my i phone and now i want to make active my i phone i get the message your i phone could not be activated because the activation server failed i try it several time but my iphone is not activate help me fpls
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
The other possible issue is a device running the iOS7 Beta. If that is the case, and you are a developer, sign into the developers forums for assistance. If that is the case and you are not a developer, try google. -
"Your iPhone could not be activated because the activation server is temporarily unavailable." help me please ..
I have same message. Just tried the update yesterday. Phone NOT jail broke and my SIM card has been init since I bought it. I need my phone and information ASAP. Is backed up on comp but can't get to without phone! During update my laptop shut off. Problem started after I started it back up to finish the process. Why would that make a diff? What to do now???? Help!
-
I have downloaded and installed the new ios7 software on my iphone 4s but im having trouble getting through the activation process i keep getting the message "iphone could not be activated because the activation server cannot be reached"? any suggestions?
The activation servers are probably overloaded with everyone trying to update to iOS 7 today. You might need to wait and try again later.
Maybe you are looking for
-
[Solved] postfix local mail delivery fails
Hi Guys, on my home pc i use postfix (gmail as a smtp relay) and fetchmail for sending/receiving mails, this works very well, however sending a mail to a local user fails, I'm lost here and need your help guys. if i send a mail like : $>echo "Test" |
-
Header condition type value not displayed in sales order output
Hi gurus, I have observed a strange issue regarding a header condition in a sales order. we have a set up like following: 1. If the Header condition XXXX is used in sales Order then this value should be printed on sales order output. 2. If the Header
-
Error in SFTP receiver channel
Hi, We are getting following error while processing the SFTP receiver channel. There is a 64 MB file which need to be processed and while processing we started getting the error log.(We have processed more that 80 MB files from the same channel.) The
-
Mappping to load a flatfile -- Please Help!!!!
Hi, I am new to OWB and trying to create a simple mapping to load a flat file into a table. My Version of OWB is 9.2.0.2.8 on an Oracle 9i DB. Below is the warning I get when I validate my mapping. When I proceed to generate I get the same warning an
-
Illustrator CS3 and Motion 3 don't play well together?
I can't get any paths from Illustrator CS3 to appear as shapes in Motion 3. The plugin from motionsmarts.com doesn't work either. I just end up with a .motn file that is empty. Does anyone know how to get Illustrator paths into motion as shapes and n