HELP - dreamweaver source URL

Hi, i would be most grateful if someone could help me out. I
am extremely new to dreamweaver and am trying to create an email
flyer. These are the steps I have taken so far:
1. designed the e-flyer in photoshop at 550 x 750 pixels
2. opened the document up as a HTML in dreamweaver
3. Linked the email address and web address so that they are
active in the email
Ok, this is where I get stuck.
5. I accesses my FTP and created a new folder with the
e-flyer inside the folder
6. I then went back to dreamweaver and typed the following in
the SRC – [
http://webaddress/foldername/filename.gif
when i then clicked on the image to save it, the source box deleted
a lot of what i had just typed in and just left the file name
there.
7. I then saved the document and copied and pasted it into
the body of the email
However the document didn’t appear, there was just a
white box. So somewhere along the line I have gone wrong and when I
paste it into an email it cant find the document from where I saved
it in FTP
Please can someone help me
Thanks a lot, natalie

Similar Messages

Unable to read the source URL error for cffeed

Hi,
I am using the cffeed to read from my twitter RSS feed but I get this error:
Unable to read the source URL.
Status Code: 400. Try adding or changing UserAgent attribute in the CFFeed tag
My code is:
<cfset feedurl="http://twitter.com/statuses/user_timeline/somenumbers.atom" />
<cffeed
source="#feedurl#"
properties="feedmeta"
query="feeditems1" overwrite="true" />
It works but suddenly it stops and it takes time about 15 minutes or more to work again.
Can any body help me with this?
Thanks,
Mandana

One thing which I did not mentioned is I want to have 6 pages rss feed together and I made it like this:
<cffeed
    source="#feedurl1#"
    properties="feedmeta"
    query="feeditems1" overwrite="true"
    useragent="Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; GTB6.6; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; AskTbBLPV5/5.11.3.15590)" />
   <cffeed
    source="#feedurl2#"
    properties="feedmeta"
    query="feeditems2" overwrite="true"
    useragent="Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; GTB6.6; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; AskTbBLPV5/5.11.3.15590)"/>
I did it for 6 pages, each one with one cffeed and then:
<cfquery name="feeditemstotal" dbtype="query">
    select * from feeditems1
    union
    select * from feeditems2
    union
    select * from feeditems3
    union
    select * from feeditems4
    union
    select * from feeditems5
    union
    select * from feeditems6
</cfquery>

Source URL/Address - Hazel

Hazel is not supporting my credit card so I cant get it. But in the trial version Hazel has this property "Source URL/Address" which is the same information as "Where from" value in "Get info" in the contextual menu of a file.
Does anyone know how to access this Where from value through AppleScript? If Hazel can do it why cant AppleScript?

Hi
set the_path to POSIX path of (choose file) as string
set the_where_froms to (do shell script "mdls -name kMDItemWhereFroms " & quoted form of the_path)
Hope this helps.
H

XML-22108: (Error) Invalid Source - URL format is incorrect

Hi,
When following statement is executed from PERL getting err msg.
`$JAVA_RUNTIME org.apache.xalan.xslt.Process -in $work_xml_file -xsl $xsl_file -out $sql_file 2>&1`;
XML-22108: (Error) Invalid Source - URL format is incorrect.
XML-22000: (Fatal Error) Error while parsing XSL file (no protocol:xsl file).
Exception in thread "main" java.lang.NullPointerException
at oracle.xml.parser.v2.DOMLocator.getPublicId(DOMLocator.java:101)
at org.apache.xml.utils.DefaultErrorHandler.printLocation(DefaultErrorHandler.java:341)
at org.apache.xalan.xslt.Process.main(Process.java:1091)
Kindly help me to resolve the issue.
Thanks and Regards,
Vijay

Hi Alosh,
Thanks for the reply.
We are in process of upgrading Oracle Apps R11i into R12. This statement works fine in 11i but not working in R12. I think issue is not with -IN, -XSL and -OUT parameters.
Thanks and Regards,
Vijay

Setting up MAMP and Dreamweaver - PHP - URL Not Found

Hello,
I'm running into a seemly simple problem, but I just can't figure out the cause. I wanted to test a php file. I installed MAMP on my Mac 10.6.8 with all the default settings...Apache port 8888, MySQL port 8889 and document root /Applications/MAMP/htdocs.
In Dreamweaver CS5.5, the settings are: Site Name: PHP Testing; Local Site Folder: /Applications/MAMP/htdocs; Server Name: Local Testing; Connect using: Local/Network; Server Folder: /Applications/MAMP/htdocs; Web URL: http://localhost:8888/. Testing server model is selected as PHP MySQL.
In the htdocs folder, I have a simple timetest.php with php echoing the system time. When I preview in a browser or even do Live View in Dreamweaver, the URL is "http://localhost:8888/timetest.php", it's giving me the error "Not Found. The requested URL/timetest.php was not found on this server".
Am I missing something simple?
Thank you!

Oops, I guess the images didn't show.

AUR PKGBUILD Source URL times out [SOLVED]

I'm trying to build assogiate 0.2.1
http://aur.archlinux.org/packages.php?ID=9860
The source code is not available. The URL in the PKGBUILD for source times out.....
Connecting to www.kdau.com|216.231.55.137|:80... failed: Connection timed out.
Giving up.
SO.......I tried to use the source from Debian,
http://packages.debian.org/testing/utils/assogiate
http://packages.debian.org/source/squeeze/assogiate
editing the PKGBIULD source URL and md5sum, but now I get:
==> ERROR: One or more files did not pass the validity check!
The Modified PKGBUILD:
#Contributor: jordz ([email protected])
pkgname=assogiate
pkgver=0.2.1
pkgrel=4
pkgdesc="An editor of the MIME file types database for GNOME"
arch=(i686 x86_64)
depends=('glibmm' 'gtkmm' 'gnome-vfsmm' 'libxml++' 'gettext' 'libtool' 'gnome-doc-utils')
makedepends=('pkgconfig')
source=(http://ftp.de.debian.org/debian/pool/main/a/assogiate/assogiate_0.2.1.orig.tar.gz)
md5sums=('a63986ab2c3ea3e1a31f263ca0ff643d')
license=('GPL')
url="http://www.kdau.com/projects/assogiate/"
build()
cd ${srcdir}/$pkgname-$pkgver
./configure --prefix=/usr --disable-scrollkeeper
make || return 1
make DESTDIR=${pkgdir} install
Now what to do next?
Last edited by jeff story (2009-11-29 09:16:45)

==> Finished making: assogiate 0.2.1-4 x86_64 (Sun Nov 29 01:13:59 PST 2009)
SOLVED..........My bad. I didn't save the last edit to the md5sum!!!
Last edited by jeff story (2009-11-29 09:46:55)

[SOLVED] Creating PKGBUILDS where the source URL does not have version

I am trying to create a a PKBUILD for idevsutil which is provided by IDrive for backing up into their cloud. The archive provided by them contains just a binary and a readme. Now the source URL, http://evs.idrive.com/download/download … inux64.zip does not include the version number. So looks like they are updating the same file for every version. In case they update the version the checksum should fail which should prevent mismatch in dev versioning and what gets installed. But are there any best practices for such cases when we write PKGBUILD?
Last edited by nsmathew (2013-12-28 16:22:02)

Trilby wrote:
The content provided by the source url for version-control packages is also always changing, yet the PKGBUILDS don't need to. The key for these is to use the 'SKIP' entry in the checksum variable. The packages must also have the version control system appended to the title (eg package-git).
You certainly could make a package-dev which skipped the checksum. However, this would mean user's of the PKGBUILD would be downloading a random unchecked binary from someone's idrive site. This seems like a very bad idea.
My idea was to not allow for the installation of the software if the upstream version changes which the checksum should take care off. Will then update the PKGBUILD with the new version and checksum.
In terms of the binary, it is the officially provided binary by IDrive and the URL points to the same.
graysky wrote:Don't think you can do much with that. I would send an email requesting a versioned archive explaining that you are packing their software for a linux distribution.
I have already requested for the license info on their dev forums, let me also check with them if a versioned archive is available. Thanks.

HELP "Data source cannot be created : t2cGetCharSet"

HELP "Data source cannot be created : t2cGetCharSet" in OracleAS MapViewer Version: Ver10131_B061023

HELP "Data source cannot be created : [MapperConfig] no se puede agregar el origen de datos de mapa."

Download and hide source url

hi all,
i am creating an web application andverification of pin number before a document is downloaded. After the pin is checked, i used
response.sendRedirect("http://www,jajitech.com/docs/test.pdf");
to download the document. It works fine but i dont want the source url to be shown anywhere.....pls how can i achieve this....
Jaji

Doesn't matter how urgent the need, you should do your own damn job.
You should look into using an HttpURLConnection to make the request from your server and stream the response to the user. The user's end then only knows your server's address.

AUR web frontend sources URL problem

Sometimes the $pkgname is different from source package tarball filename, so it is necessary to use a different variables.. For an imaginary foo package, with sources available at http://foo.org/foo-linux-1.2.tar.gz , the PKGBUILD fragment may look like
pkgname=foo
pkgname0=foo-linux
pkgver=1.2
source=('http://foo.org/$pkgname0-$pkgver.tar.gz')
unfortunaly, in such case, the AUR web page points to a wrong sources URL: http://foo.org/foo0-1.2.tar.gz . It looks like the frontend thinks that the source URL must contain $pkgname, and is doing simple string substitution, not interpreting the PKGBUILD as a shell script.
Is there already a working way how to form the PKGBUILD, to avoid this sort of problem ?
Last edited by mykhal (2007-09-02 17:28:50)

tardo wrote:...I don't think I'll ever flag the openssh pkg as safe because you're implementing completely new functions not found in the official package. Other than that, fix the others and you're good to go =/
thanks for the review.
If you look more carefully at the openssh patch, it is not implementing anything new, openssh has an infrastructure for using hardware engines (engines.h), but is not used by default somehow, the patch is just enabling it. Anyway, I'm not creator of the patch, is it taken from Michal Ludvig's site (http://www.logix.cz/michal/devel/padlock/) , some of his patches have also been accepted in linux kernel.
But I understand, this is very sensitive package..

Source url problem

Hi all,
I'm trying to update a package but I have some problem to download it:
the source url is:
http://git.fedoraproject.org/?p=hosted/nodoka;a=blob_plain;f=branches/0.6/gtk-nodoka-engine-0.6.tar.gz;hb=HEAD
with a browser the file is downloaded correctly, but with wget the name of the file is something like
index.html?p=hosted%2Fnodoka;a=blob_plain;f=branches%2F0.6%2Fgtk-nodoka-engine-0.6.tar.gz;hb=HEAD
Someone know some hacks for this problem?
Thanks
Luca
Last edited by luca (2007-09-14 19:33:59)

Oops, my bad. What I said only applies to makepkg 3.1 .
It works fine with makepkg 3.0 indeed, except the md5sum part. Also it fails to copy the files from $startdir/src to $SRCDEST (which defaults to $startdir), but it isn't critical.
makepkg 3.1 however first download the files to $SRCDEST (which still defaults to $startdir), and then try to link them to $startdir/src, where it fails. And it stops there.
I am not sure if I should report a bug for this, since it's apparently not possible to support these broken url...
Otherwise, after thinking a bit on this problem, rather than using this dirty hack previously mentioned : FTPAGENT="$FTPAGENT -O gtk-nodoka-engine-0.6.tar.gz;hb=HEAD"
or using git manually and trying to checkout the stable release with it,
why not just combining these 2 ways?
That is, downloading the files manually with wget (so not using the sources array, just like git/svn/cvs PKGBUILDs), and extracting them manually.
This works nicely with both makepkg versions.
pkgname=gtk-engine-nodoka
pkgver=0.6
pkgrel=1
pkgdesc="Default gtk engine provided by Fedora8"
url="https://hosted.fedoraproject.org/projects/nodoka/wiki"
license=('GPL')
depends=('gtk2')
makedepends=('pkgconfig')
arch=(i686)
options=(!libtool)
build() {
cd $startdir/src
wget -O gtk-nodoka-engine-0.6.tar.gz "http://git.fedoraproject.org/?p=hosted/nodoka;a=blob_plain;f=branches/0.6/gtk-nodoka-engine-0.6.tar.gz;hb=HEAD"
wget -O nodoka-theme-gnome-0.3.2.tar.gz "http://git.fedoraproject.org/?p=hosted/nodoka;a=blob_plain;f=branches/0.3/nodoka-theme-gnome-0.3.2.tar.gz;hb=HEAD"
tar -xzvf gtk-nodoka-engine-0.6.tar.gz
tar -xzvf nodoka-theme-gnome-0.3.2.tar.gz
cd $startdir/src/gtk-nodoka-engine-$pkgver
sed -i 's|/usr/bin/install|/bin/install|g' $startdir/src/gtk-nodoka-engine-$pkgver/src/Makefile.in
./configure --prefix=/usr --enable-animation
make || return 1
make DESTDIR=$startdir/pkg install || return 1
mkdir -p $startdir/pkg/usr/share/themes
cd $startdir/src/nodoka-theme-gnome
cp -r Nodoka $startdir/pkg/usr/share/themes
Of course, that's still rather awkward, we have to do manually what makepkg is supposed to do, but well, I am afraid there isn't any real solutions.
I still think the best one is to contact these guys, and ask them if they can do something about it

HELP DREAMWEAVER CS4 NOT SHOWING SWF FILES

I have a presentation in 2 days in Tokyo. And I'm panicking.
I'm on am Intel Mac OS X 10.4.11.
I have the latest version of Flash Player 10 installed. (Not the brand new beta version).
I created a great website in Dreamweaver MX a few years ago.
I never had ANY issues with .swf files displaying until using Dreamweaver CS4.
I updated my photography portfolios in Adobe Bridge, and used Dreamweaver CS4 to link the updates.
NOTHING MORE THAN THAT!
Then, NONE of the .swf files that were always viewable are showing.
There is absolutely NO Flash content showing on any page of the site now.
Not even in browser view in Safari, or Firefox.
I uploaded the files along with the newly created SCRIPTS folder to my server, and still no .swf files are viewable.
These are NOT FLV files they are .swf files that were imbedded properly, and were always viewable. Until now.
I have to go to Tokyo in two days and give a presentation of this site.
What is the problem?
The attached files show the view in Dreamweaver CS4. The view in Safari, and the view in Firefox.
I'm screwed for a desperately needed job in Tokyo if I can't get this fixed ASAP.
Please help.

i think you are on to something here. but i am not sure how to go about fixing this.
are you saying the "../s
should be replaced with "S
where is this code located? in the source code of each page that has the swf files? i should replace it with the correct version you copy and pasted? and that should resolve the problem?
big thanks if this is the issue.
<script src="../scripts/AC_RunActiveContent.js" type="text/javascript"></script>
The correct link to that file would be this -
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
Note the "S" in place of the "s". *nix servers are case sensitive.

Workflow task hyperlink with [%Current Task:Form_URN%]&Source= not returning to Source URL

I've successfully used the format [%Current Task:Form_URN%]&Source=http://server/site/list/mylist/allitems.aspx
in SP 2010 workflow emails to return the user to the All Items view of the main list, rather than to the task list, after completing the task. For some reason, this doesn't work in a 2010 workflow running on SP 2013. The user gets returned to the All
Items view of the task list, which I think is quite confusing. Any idea why this might be happening? I see no obvious difference between the two URLs that are produced in the different environments.
Thanks

Hi，
I understand that you use SharePoint Designer 2010 approval process workflow running on SharePoint 2013.
I try to reproduce the issues, however, everything works well.
In my on SharePoint 2013 environment, I can get the URL as below in the email body:
https://site2013name/_layouts/15/WrkTaskIP.aspx?List=a1a1c6c3%2D8235%2D4773%2Db4a4%2D20f548523582&ID=9&Source=https://site2013name
/Lists/test/AllItems.aspx
Then I open it in the Brower, after I approve the task, it return to the test list.
In my on SharePoint 2013 environment, I can get the URL as below in the email body:
http://site2010nmae/_layouts/WrkTaskIP.aspx?List=72d2f66d%2Db651%2D49ed%2D9851%2D89d4612ae739&ID=2&Source=
http://site2010name/Lists/customlist/AllItems.aspx
Then I open it in the Brower, after I approve the task, it also return to the customlist list.
Please make sure you open the task in the Brower using the URL in the email body. If you open the task in the Task list, then after you approve the task, it will return the task all items page.
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Please help Dreamweaver Rookie with Templates

Hi Everyone,
As stated in the title I am a Dreamweaver rookie.
I am creating 4 new websites, each with a different URL for my company.
I downloaded a pre-made template off of Adobe and added a few things, customized the colors and graphics and got it right where I want it.
I had hoped to copy this template with the intention of using it for the other 3 websites with the intention of keeping the nav bar the same for all 4 websites, so I changed all the graphics(header, footer, and main container images) to create the new website, changed the content on the page, saved it as a template with a new name to my same template folder in the root folder created for the site.
Unfortunately when I changed the graphics it also changed the graphics on my original page (but not the content)
So, I went back to the original page, restored the graphics to where they were and it's changing the new template as well.
I have tried saving the template as an HTML page and it didn't work, still changes both pages.
So, here's my question, how do I do this, I want to be able to dupicate this template, keep all the nav the same, keep all the formatting but be able to change the graphics from page to page. Please help!
Thanks
Mike

Hi,
I'm still having the same issue,
I created a new root folder for the new site and defined the new site withing dreaweaver using this root folder.
I copied the template that I want to use out of it's existing root folder, and pasted and renamed it into the new site root folder.
I am trying to change the banner conatiner background image. I am doing this by clicking on "CSS" then opening the dialog box for "Banner Area Container". I click on background, select the image I want, click ok and close the dialog box.
I then go to File, save and close the template.
Somehow it's still changing the template in the other root folder for the original site.
Help!

Need api help to find URL of document in Filenet Content manageer

Hi ,
I could able to get access Filenet Contentmanager. I got Session/ObjectStore. now I need to find URL location of document/image in content manager. so that i can just display that image on browser instead betting byte[] of content and draw on screen.
this is urgent.. pls help me..
thanks in advance

lkb3 wrote:
..Can anyone tell me why this is not returning the entire line?That is not the behavior I see here. An SSCCE (http://pscode.org/sscce.html) based on your snippet*.
// <applet code='WhereAmIApplet' width='500' height='100'></applet>
import javax.swing.*;
public class WhereAmIApplet extends JApplet {
    public void init() {
        String completeURL = getDocumentBase().toString();
        add( new JTextArea(
            completeURL +
            "\n" +
            System.getProperty("java.vm.version")) );
}Output from 3 runs.
From TextPad launching as an applet
file:/D:/projects/numbered/all/158WhereAmIApplet/tp028b26.html
1.6.0-b105
From TextPad launching the source in applet viewer
file:/D:/projects/numbered/all/158WhereAmIApplet/WhereAmIApplet.java
1.6.0-b105
From FF, using an applet.html
file:/D:/projects/numbered/all/158WhereAmIApplet/applet.html
19.0-b09* BTW:
1) When posting code, code snippets, XML/HTML or input/output, please use the code tags as described on the 'sticky post' at the top of the forum thread listing - those posts are there for a reason.
2) For better help sooner, post an SSCCE. I might not have had the motivation to write what you had not bothered to add.
Edit 3) Applets are not easy to develop/debug. Someone who is 'New to Java' should probably not be attempting applet development.
Edited by: Andrew Thompson on Feb 15, 2011 5:47 PM

HELP - dreamweaver source URL

Similar Messages

Maybe you are looking for