HELP Droid 3 issues

Two Issues and a comment, hope someone can help.  This is my 2nd droid 3 (less then a year old) first one lasted 3 days and it was only a refurbished one at that.  Anyway, On 6/29 I got a text msg that state I must click on my verizon data widget to update my usage I dont have that widget, nor can I find it.  Also, seems that my text messages are no longer being received. Can anyone offer any help.  Thanks

1) Very odd, don't know about that one.
2) Try setting your facebook sync settings to sync all contacts (within the facebook app), give it some time to sync, then do the join process again.  Those particular contacts may not have any similar info (email address, phone number, etc.) so it may not recognize they are the same person (especially if you have a slightly different name for them, like I have my mom listed as "mom", and her facebook profile has her full name).  This should allow you to at least search for them.  After they are joined, you should be able to put it back to sync only existing contacts so that your phonebook isn't full of facebook friends that you are never planning on calling.

Similar Messages

  • Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.01 Updates on Iphone 4?

    Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
    I have tried the following all ready:
    Resetting Phone
    Resetting Settings on phone
    Change Headsets to speakers
    Reinstalled Phone
    Updated to IOS 7.1
    No of the above has resolved the issue does anyone have any ideas?

    Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
    I have tried the following all ready:
    Resetting Phone
    Resetting Settings on phone
    Change Headsets to speakers
    Reinstalled Phone
    Updated to IOS 7.1
    No of the above has resolved the issue does anyone have any ideas?

  • Need HELP (Project Issue) : Having 3 individual VIs, datalogger.vi, start vi, amksms.vi done. (How to run the VIs in sequence order - datalogger start amksms combine into 1 VIs? )

    Need HELP (Project Issue) : Having 3 individual VIs, datalogger.vi, start vi, amksms.vi done.
    (How to run the VIs in sequence order - datalogger > start > amksms combine into 1 VIs? )

    VIs in icon.
    how would it able to run in the sequence order:
    data first, follow by start and lastly amk sms.
    Attachments:
    dsa.jpg ‏10 KB

  • Help on issue "SGD/USD - rate does not exist in scenario for"

    Hi Experts,
    Hope that someone may help in issue that I can't seem to fix in TXAK Option pricing engine.
    When trying to generate market data, the program is giving me error message number T0478 - "SGD / USD - rate does not exist in scenario for".
    Your help please to inform me what customizing need to be done to troubleshoot this issue!
    Thanks,
    David

    Hi Mridul,
    I also checked this setting and the exch. rate for SGD/USD has already been set previous to my error. Also, this configuration allows the exch. rate to be valid from a certain date so I don't think that this is what Ravi is referring to..
    From what Ravi said, I need to set an exchange rate for the Evaluation Type that I am using. OB08 doesn't determine which evaluation type is being used.
    Thank you very much for your help, and please do let me know if the question isn't clear so I may explain more.
    Regards,
    David

  • Help! Issue with Adobe 8 and Microsoft 2007

    Hello,
    I'm hoping someone can help me. I recently installed Adobe 8 on a laptop running Microsoft 2007. When an email arrives with a word attachment, I double click on the attachment, click open, the word program opens rigth up but the document never appears. There is no error message, just no document. Previewing the document also works.
    Excel attachments work fine. This issue just started happening after Adobe was installed this afternoon. Before that, we had no issues.
    Does anyone have any ideas???
    Any help/suggestions would be GREATLY appreciated!!!
    Thanks!

    That said, it's also incredibly boring and puts yet another arrow in the quiver for dual wield unholy (which is fast overtaking two-handed unholy for superior damage, thanks to Sudden Doom process and Runic Empowerment) by increasing spell-based damage instead of strike damage. I'd very much like to see this mastery switched out for something that specifically reinforces the two-handed play style, even if it's as simple as adding more physical damage to Scourge Strike based on high-end weapon damage. We have very available stock of [url=http://www.storeingame.com]RuneScape Gold[/url] on most of the servers and we can deliver your [url=http://www.rsfarming.com/]RuneScape Gold[/url] on the order in a short while. Want to have it? Select here, here all you want [url=http://www.gobuycheaprsgold.com]Cheap RS Gold[/url] beyond imagination, come [url=http://www.zyy.com]Buy WOW Gold[/url]  for providing to you.

  • Report Variable F4 help performance issue

    Hi,
    I have a BI report on DSO >> Multiprovider.
    When i choose F4 Variable help it takes around 2-3 minutes to display the data for selection.
    Currently XXXX chars is with -- Only Posted Values for Navigation. I have tried the below options but could not see any improvement in variable f4 help performance.
    -- Only Values in Infoprovider
    -- Values In Master Data table
    Could someone please suggest if you have faced the similar issue.
    Thanks
    Ashok

    Hello Ashok,
    Ideally you should never built a report based on a DSO, this is because it stores data at a line item level. The way the filter works is that looks at all records (SIDs) lying in the range of selection in the info provider and then displays the filter pane after it populates the records.
    There can only be 1 check in this case, is to check if your DB statistics are up-to-date. The DB statistics decide if an index is to be used or not. So check for the DSO active table and all related SID tables in transaction DB20. Check the date of creation of the statistics, if it's too much in the past, then the DB does not effectively use the indices and hence it takes time.
    You can use program RSANAORA to recompute the statistics.
    Regards,
    Ansel D'Souza

  • Urgent help - PO issue when receiving

    Dear gurus
    i have an urgent production issue, i have done a mass conversion of all the master data from one plant to another, the scenario is that they are closing down and stopping operations at old plant and moving the entire operations to new plant under the same company code, so for this i did the entire MM master data conversions
    i also changed the delivering plant and address using MASS T-code for all the open PO's line items from old plant to new plant (some of line items had partial open qty and some of them entire open qty)
    <b><u>1st issue:</u></b>
    But when i am doing VL31N inbound delivery, the PO qty is NOT showing up automatically in the delivery qty field, so it is causing issues when trying the do a GR
    <b><u>2nd issue</u></b>
    also another issue is that in the Goods Movement Data tab while using VL31N for GR, it is by default showing the old plant still and is grayed out even though the PO line item contains the new plant code and delivery address, so how can we change the receiving plant to new plant and why it is not picking the new plant still
    so can you please help me on this issue and let me know if there is any settings or resolution
    thanks a lot in advance and appreciate your expert advices
    chakri

    dear chakri,
    you have written that you have converted the material master data, but what about the existing puchase orders, you have to copy all the orders in the new plant .
    or if possible try to chane the delivery address in in the item details of the P.O.
    rewards if useful.
    ashish

  • Please help - performance issues with Lr 2.3

    I really hope some user/s or Adobe support members could help me with tweaks/suggestions to improve Lightroom 2.3's sluggish performance on my computer.
    First of all I have read about 100 different forum topics this morning, have used the forum search extensively and I cannot find any one topic which talks about different methods for improving performance. So I really have tried to find the answer before asking for help and I have done a lot of googling to try and find some simple answers but after all this reading I am more confused than when I started out.
    Let me first explain what I am experiencing and I will try and be as detailed as possible.
    1 - When I browse the library it is incredibly slow rendering the thumbnail previews. I found a topic which talked about degfragging the LR catalog using sqlite and contig, I did that and it made no difference to performance.
    2 - I left my machine running an entire day to render the 1:1 previews thinking this would help me with the slow thumbnail issues but it made no difference. It is however faster now when I double click and image and get the immediate 1:1 preview :)
    3 - I have turned off the Automatically write changes into XMP, suggested on another topic, that made no noticeable differences to performance either.
    4 - A few months ago when I was still running 2.1 I found a topic either here or on Google that told me to delete the entire previews folders and let LR recreate them from scratch, I did that back then and that did not make any difference either, turned out to be 24 hours of waste time for me.
    5 - I tried changing the following settings under catalog settings (has not improved anything):
    size: 2048 Pixels
    quality: High
    automatically discard 1:1 previews: Never
    6 - The only slow performance I am experiencing in LR is the thumbnails and this slows down my workflow dramatically. Everything else in LR seems to be quite fluid and usable and fast. I notice many users have complained about the slow thumbnails issues and I was praying that 2.3 was going to sort this out.
    7 - I have also noticed that when scrolling up and down the thumnail list it sometimes uses more than 1 processing core and then sometimes not and then when I stop scrolling up and down the thumbnails and leave it alone for 5 seconds suddenly all 8 processing cores spike to around 50% usage with processing "something".
    8 - I have tried making my thumbnail previews different sizes, also makes no difference really, unless I go to the smallest size and then it seems ok but then it's hard to see what's going on at all with thumbnails that small.
    9 - Lightroom is only using up 1.1 GB of available memory so I do no think the slowness relates to memory and I am running my memory in a proper DDR3 configuration.
    10 - I have tried playing with my graphics card settings (below) but it does not seem to help no matter what I try.
    11 - Overall it "seems" that Lightroom is trying to re-render thumbnails continously, I know technically this may not be true but as an end user this is how it feels to me.
    My computer specifications are as follows:
    Intel i7 965 Extreme Edition (not overclocked)
    Intel DX58 Smackover Motherboard
    6GB DDR3 Ram (not overclocked)
    GEForce 9800GT Video Card (with WHQL driver)
    SATA 2 1TB Seagate Drives
    Windows Vista X64 (SP1)
    Lightroom 2.3 X64
    NEC 30" Display running at 2560x1600 resolution
    The way I have LR configured on my PC is as follows:
    - Program files installed on main C drive which is a 250GB partition on a 1TB Seagate Sata 2 drive with 190 GB Free space all the time.
    - Lightroom catalog is on my E drive which is a 1TB Seagate Sata 2 drive
    - Camera Raw Cache is set at 10GB and resides on the same E drive as the LR catalog
    - My E drive has 100GB Free Space
    - I have tried tweaks to the video card settings to be Lightroom spe

    Hi Don
    Thanks for the reply, I have tried changing any/all settings on the card set to performance versus quality and still it has no effect. I just got the latest video driver for the GT9800 which was released on the 3rd of March and that has no effect either. I tried loading the 32 bit version of Lightroom without any improvement to speed on the thumbnails whatsoever so that rules out the possibility of it being something to do with 64-bit.
    I read an Adobe knowledgebase article saying that the Nvidia control panel conflicts with certain Adobe software but they do not say how to turn it off and I also cannot even find the answer to that on Nvidia's forums either. So I still cannot say whether or not the Nvidia control panel is the problem because I cannot disable it.
    I phoned a friend this morning who is running Lightroom 2.3 on a simple Core-2 Duo machine and his thumbnails render in half the time that mine do and my hardware is top of the range stuff in comparison so you can imagine my frustration with this thumbnailing issue. My friend also has an Nvidia card 8800GT I think.
    I have spent so much time on this and I am no further to a solution and this blurry thumbnail issue is seriously messing with my eyes and it does not make for a very pleasant user experience.
    What concerns me is that while Lightroom is idle and the machine is idle Lightroom is not doing anything in the background like rendering thumbnails. It only starts rendering them once I scroll down a page, no doubt by design but for more powerful machines there is a lot of processing ability going unused. The thumbnails on the filmstrip render a lot faster compared to grid view but their rendering state is also not retained and once I have scrolled past 100 images and then scroll back they are all blurry again and I have to wait for them re-render all over again. All this re-rendering of thumbs is a really big waste of time.
    I also noticed something else interesting this morning, I opened task manager and left it open while I was scrolling thumbnails (continuous scrolling without waiting for them to render sharp) and only one core was being used to do this processing, I tested this multiple times and left it open while I scrolled through 5000+ images and only one core the whole time was being used. Only once I stopped scrolling and Lightroom began it's rendering of the thumbnails (about 10-15 seconds after stopping scrolling) did it only then start using multiple processors, I'm not sure if that has something to do with anything and memory wise I have 4.2 GB of available memory and Lightroom is only using about 425 Mb of memory.
    I have changed the size of my thumbnails to below halfway on the slider and that made only a slight difference, although now they are so small on this 30" screen that I am now suffering even more eye strain as a result.
    I am busy loading LR 1.x to confirm whether any of these behaviours existed back then and will report back.

  • Plz help production issue(smartform)

    hi experts plz help its a production issue
    i have a box in my smartform in which in one line i can only show 50 characters .and i have a text of 70 characters but i only have to show 50 characters from 70 characters .
    now wat i did i stored 70 characters variable into 50 char variable abd displaying it .
    but the issue is
    if i want to print .
    hi this is sdn and here u can get all the information about sap .
    now lets say
    i of information is the 46th character of my line
    now what is happening it is coming like
    hi this is sdn and here u can get all the
    infor
    its showing 50 character only but if word is not completed it is printing it in next line.
    it should print like
    hi this is sdn and here u can get all the infor
    plz help how to do it
    thanx in advance .

    code i am using is ::::::::::::::::::::::::::::::::::::::::::::::::
    data : TEXT_3I56(50) type c .
    move is_bil_invoice-hd_gen-bil_number TO textname.
    CALL FUNCTION 'READ_TEXT'
    EXPORTING
    CLIENT                         = SY-MANDT
    id                            = '0002'
    language                      = is_nast-spras
    name                          = textname
    object                        = 'VBBK'
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        =
    tables
    lines                         = t_lines_3156
    EXCEPTIONS
    ID                            = 1
    LANGUAGE                      = 2
    NAME                          = 3
    NOT_FOUND                     = 4
    OBJECT                        = 5
    REFERENCE_CHECK               = 6
    WRONG_ACCESS_TO_ARCHIVE       = 7
    OTHERS                        = 8.
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *describe table t_lines lines n.
    *if not n is initial.
    *bank_note = 'X'.
    *endif.
    READ TABLE T_LINES_3156 INDEX 1 .
    IF SY-SUBRC = 0 .
    TEXT_3I56 = T_LINES_3156-TDLINE .
    ENDIF.

  • Plz help upgrade issue moving data from char type structure to non char typ

    Hi Experts
    plz help its very urgent
    Data :workout(5000) .
    FIELD-SYMBOLS : <FS_WORKOUT> TYPE ANY.  
    workout = '         u' .
    ASSIGN WORKOUT TO <FS_WORKOUT> CASTING TYPE C .
                      BAPISDITM = <FS_WORKOUT>.
    i am getting dump after BAPISDITM = <FS_WORKOUT>.
    i think i am getting the dump bcoz i am moving character type structure to non character type structure but i think with field symbols we can remove this issue thats y i used it but its not working plz help me
    its very urgent
    *dump is :*
    Short text
        Data objects in Unicode programs cannot be converted.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "ZSDR0009" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    How to correct the error
        Use only convertible operands "dst" and "src" for the statement
           "MOVE src TO dst"
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "UC_OBJECTS_NOT_CONVERTIBLE" " "
        "ZSDR0009" or "ZSDR0009_I02"
        "USER_COMMAND"
    thanx in advance

    i got d solution in this thread
    Hi all,
    data: gv_line(6000) type c.
    Bvbapkom = gv_line.
    But i am getting the Error like : gv_line and Bvbapkom are not mutually convertable.
    Note: Bvbapkom is a Structure
    How do i solve this ?
    Mahesh
    KR  
    Posts: 210
    Registered: 11/24/06
    Forum Points: 0 
      Re: gv_line and Bvbapkom are not mutually convertable.  
    Posted: Nov 30, 2007 8:40 AM    in response to: KR         Reply 
    Hi ,
    i got the solution
    ANSWER:
    Field-symbols: <X_Bvbapkom> type x,
    <X_gv_line> type x.
    Assign: Bvbapkom to <X_Bvbapkom> casting,
    gv_line to <X_gv_line> casting.
    <X_Bvbapkom> = <X_gv_line>.
    Nasaka Ramakris...  
    Posts: 4
    Registered: 1/19/08
    Forum Points: 20 
      Re: gv_line and Bvbapkom are not mutually convertable.   
    Posted: Jan 19, 2008 7:42 AM    in response to: KR         Reply 
    Hi Check this answer.
    ANSWER:
    Field-symbols: <X_Bvbapkom> type x,
    <X_gv_line> type x.
    Assign: Bvbapkom to <X_Bvbapkom> casting,
    gv_line to <X_gv_line> casting.
    <X_Bvbapkom> = <X_gv_line>.

  • IPhone 5 brightness permanently reduced (Please help, voltage issue??)

    Hello,
    I really need someone with high expertise to help me. Obviously i appreciate any help given but please dont say point less comment like reboot the phone or turn autobrightness off.
    Here is the issue:
    I have had several iPhones, right from the first to the 5. Lucky me. But i have always had the same issue. The screen brightness is significantly lower than any other iPhone that I compare it to.
    Now i have the iPhone 5, if i compare it to anyone elses the brighness is much lower. Autobrightness is off. When i first got the iPhone the brightness was like everyone elses.
    i only use the official charger. I think there may be a problem with the voltage or the electricity in my home as all my iPhones have had this problem. Im not sure when the change happens but the something is damaging the backlight of my iPhones. No idea what.
    Please can some one with the same issue or knowledge of physics please help me. I dont want to keep having this issue. I also have a Macbook pro and am fairly sure its happned with this also but have no means of comparison as I dont know any one else with one that comes to my apartment.
    Regards
    Fahad

    The iPhone 5 has full Warranty. Make Genius reservation and take to Apple Store. Show the Genius the problem and they will replace your iPhone 5 with a perfect iPhone 5 without problems. If some of iPhone 5 have this problem, it does not matter, Apple makes millions of iPhone 5, some are going to have a problem. When the Genius gives you the new replacement iPhone 5 test it out in the Apple Store before you leave, so you are happy and do not waste anymore of your time.

  • Region Observer to help jQuery issues

    So I have been working on this for a bit and can't seem to get anywhere. I have read multiple posts about issues with SPRY regions conflicting with jQuery and other javascript inside of SPRY regions. I can't seem to get it to fly. I my region observer doesn't seem to be helping.
    I have jQuery and tinyMce inside my SPRY region that won't fly. Example code (greatly simplfied!)
      <div spry:region="ds1" id="myRegion">   
                <input name="title" type="text" id="title" value="{Title}" size="70" maxlength="70" />
                <input type="text" id="eventDate" value="{EventDate}" name="eventDate" /></td>
    </div>
    The EventDate input area is supposed to call the jQuery DatePicker but it does not work if it is inside the region. It is called by this simple code
    <script>
      $(document).ready(function() {
        $("#eventDate").datepicker();
    </script>
    I read that it has something to do with what loads first and how the region loads before the datepicker has a chance and renders it useless and I am to use a region observer to fire it off.
    Spry.Data.Region.addObserver("myRegion", { onPostUpdate: function() { datepicker.init(); }});
    It does nothing. I am assuming that I would do the same thing to fire the tinyMCE WYSIWYG inside this area as well. I know enough about javascript to be slighly dangerous, but this one has rendered me useless!
    Thanks for any help.

    var ds1 = new Spry.Data.HTMLDataSet("datasets/indEvent.asp?id=<% response.Write(request.queryString("id")) %>","events");
    var myObserver = function(nType, notifier, data) {
        if(nType == 'onPostUpdate'){
            $(function() {
               $('#eventDate').datepicker();
               $('#description').tinyMCE.init();
       Spry.Data.Region.addObserver('myRegion', myObserver);
    </script>
    What you are doing there with your jquery code is:
    When the DOM Ready event is fired... Execute .datePicker and .tinyMCE. But then the Spry Region is drawn the DOM is already loaded. So it might not execute propperly what i would advice is to do:
    Spry.Data.Region.addObserver( "myRegion", {
         onPostUpdate:function(){    
                   $('#eventDate').datepicker();
                    $('#description').tinyMCE.init();
    Also remove the:
    <script>
      $(document).ready(function() {
        $("#eventDate").datepicker();
    </script>
    From your page

  • Window Properties (HTML Help) - Placement Issues

    I am compiling my online help in Robohelp 8 and have an issue with the window placement of the Help menu output.  I have a dual monitor setup so the Help window appears on the primary monitor.  Is there a setting or configuration that instructs the Help menu to open up as a child to the parent application that's calling the Help?

    Janet:
    Make sure there are no carriage returns lurking inside the
    JavaScript (depending on how the content was wrapped when you
    selected it to Copy/Paste). One way to be sure is to copy it to
    Notepad and turn off the Wrap feature; any line breaks will be
    obvious.
    Good luck,
    Leon

  • 802.11n Enabler: Does it help existing issues?

    Just wanted to know if anyone has downloaded and installed the update with the hopes of solving existing connection/quality issues.
    Please post on this thread if you did, and what the result was. I'm not looking for info regarding speed increase with an N-branded router, but rather improvements in existing connection issues.
    I will mark any decent info received as helpful.

    I am having the same problem with my C2D Macbook. My Airport is very lethargic. Dashboard takes like 5 mins and many websites time out or I get the "can't find the server". I downloaded and installed the most recent Airport update and then paid the $2.13 for the "n" enabler and installed it. Neither of these seemed to have helped. I even changed the security settings in the Airport Express from WPA2 to WEP as noted by Cheryl@ACI in the following thread: http://discussions.apple.com/thread.jspa?threadID=797008&start=50&tstart=0
    I don't think it's the Airport Express because it worked fine with my old Core Duo Macbook (That was replaced by Apple for many other reasons) and it's definitely not the router because that works flawlessly when I connect it directly to my Macbook via Ethernet.
    Any suggestions would be greatly appreciated?

  • Recommendations for Help Desk (issue tracking) program for Mac OS

    Hello all
    Any recommendations for a help desk software to be mainly used for issue tracking/ticket management applications for Mac OS?
    I prefer for the app to run local on the Mac so no web or server software.
    Thank you

    I also use CS5 (Design Suite) on a Mac. When I upgraded to Lion, Illustrator did not crash for me, but it (and Photoshop) was acting squirrelly and some of the features did not work at all. After six weeks, I reformatted my hard drive and reinstalled Snow Leopard. Now everything works perfectly.
    The other thing I did was to partition my hard drive so that I can reinstall Lion on the new partition. That way, I can run either operating system and run application programs on the OS that is most appropriate for it. I have no problems moving files between the partitions.
    Not the most attractive solution, but I am very satisfied. Just my two cents...!
    Good luck!

Maybe you are looking for