Help! Dual Core Center

Hi,
I just installed dual core center on Windows 7 Ultimate x64 but it won't allow me to change my CPU fan speed! The MB button is greyed out? How can I change the speed of my CPU like I could before when I used Windows XP and Core Center? My motherboard is the MSI K8N SLI Platinum.
Thanks.

Quote from: Stu on 02-November-09, 02:57:07
Which one? Please use the full model name of your board, not the MS-xxxx number.
http://eu.msi.com/index.php?func=searchresult&keywords=ms-7100
The full model is the MSI K8N SLI Platinum motherboard.
Ok, I have made some progress on this problem. I have removed Dual Core Center (like everyone says here, it is CRAP!) so now I have managed to get my fan to slow down via the BIOS by enabling the Smart Fan and setting it to 50C. Now my only problem is, I feel that the polling for the temperature is not done frequently enough. I estimated that the sensor only polls something like once every 2 min. It just feels like it's taking far too long for the fan to speed back up. Is there any other way to speed up the polling frequency for the temperature?

Similar Messages

  • Help...MSI 975x Platinum PUE + Dual Core Center + MSI 7900 GTX

    I have an MSI 7900GTX on my MSI975x MB.  I've read the dual core center manual and it states that Dual Core Center can also monitor VGA temps and whatnot as long as it's an MSI Graphics card.  Currently I am unable to monitor VGA stats on Dual Core Center due to the fact that it is greyed out.  Can anyone tell me how to activate this feature?

    To know you GPU temps, you can access it via Display Properties for nVidia cards and for ATi cards, you can view via the ATI Control Panel.

  • Dual Core Center working in Vista but not XP on a dual boot system?

    Hi All.
    My system specs are:
    Dual Boot Windows XP Pro SP2 and Windows Vista Ultimate
    Temps for CPU in Vista averaging at 43 - 45 degrees in XP averaging at 38 to 42 degrees.  It never seems to go much higher than 53 on Load. 
    Thermaltake Soprano tower
    MSI K9N Diamond Motherboard
    Hiper 580watt Modular PSU
    4GB OCZ Gold 6400
    AMD X2 6000+
    2 X 300gb diamond maxtor 10 HDD
    MSI Geforce 7800gt
    DVD Rom
    LG Dual Layer DVDRW+/-
    I am running a dual boot system with Windows XP Pro SP2 on one partition and Windows Vista Ultimate on the other.  Both operating systems seem to be operating properly except for an odd situation with Dual Core Center.  In Windows XP Dual Core Center only indicates the Mainboard properties - No VGA, whereas on Windows Vista Ultimate Dual Core Center indicates both VGA & Motherboard properties.  I have installed MSI Nvidia drivers for the Graphics card & also tried straight Nvidia drivers for the card but it has made no difference VGA will not show up in XP.  Yet on installing Dual Core Center on the Vista partition VGA showed up immediately.  Can anyone help.
    If anyone can come up with an answer to this it would be a real help.
    Many Thanks in advance.

    have you try to update/install the dual core driver from amd?

  • MSI P35 NEO & dual core center problem

    hi, i have a problem with my motherboard msi, Bios 1.2  and the dual core center 2.0.0.8 ,since days ago, the msi dual core center 2.0.0.8 so many times shows fan speeds alerts false alarms from the cpe temp, for that reason, i upgraded the appl to 2.0.1.6 ( the last),i set the oc level to 25% like with the older version, but time later the pc crash and put a black crash screen  and it dont let me to overclock my cpu    , i get back to 2.0.0.8 but the fan alarm dont stop, and i dont know if the newer version fix this problem
    any help?   
    sys specs
    msi p35 neo bios 1.2
    core 2 quad q6600
    2 gb value ram
    psu duck

    right, but i like to use msi dual core center, because i dont like to have the pc overclocked all the time, anyother suggestion for this?
     thanks for the reply

  • NX7600GT Diamond Plus and fan speed with Dual Core Center

    I just got a NX 7600GT Diamond Plus for my HTPC. I noted that Riva Tuner and other utilities are not able to control the fan speed of the video card. The only way one can control the fan speed is via Dual Core Center and 3D Core Cell. The problem is that the default setting for fan speed on Dual Core Center is too high and clearly audible. How can I get Dual Core Center to start with user defined presets during windows start-up/boot-up ?
    What I want to do is to put the fan into 'SILENT' mode automatically during Dual Core Center start-up. Any ideas / suggestions ?

    Quote from: BOSSKILLER on 17-January-07, 00:44:11
    well no need to edit manually, MSI provided everythink in easy way from core center.
    select advanced mode, create your custom profile pickup your desired settings,(setup maximum FAN RPM via buttons) and save it to custom profile.
    suggest you to read help section from program.
    So the custom profile is automatically loaded every time DualCoreCenter starts up ? Maybe there is something wrong with my install of DCC, I cannot get it to load custom profiles automatically upon startup. I can save the changes to say "User Profile 1" but the profile active on startup always is the "default" profile ...

  • MSI P6N SLI Platinum, Dual Core Center and Mem Voltage

    I set my memory voltage for my Corsair sticks to 2.0 just as TheRamGuy at Corsair's House of Help forum had suggested. However, in Dual Core Center, it reports that the Memory voltage is at 2.7!!!!.
    I seem to vaguely remember some threads somewhere in one of the forums about the MSI boards frying higher voltage memory, and so am concerned to say the least.   
    Or is there a better program that can display the Memory voltage??   Or do I believe the Dual Core Center readings?

    Quote from: NovJoe on 13-April-07, 16:01:41
    CPUID would let you know if your RAMs are running at the correct timings.
    You can try SisoftSandra or Everest to check on the detected voltage in Windows.
    OK, I've downloaded both SiSoftSandra and Everest. I don't see anywhere where these programs report/measure a memory voltage. One one screen, it will report on the SPD settings for the memory and lists the rated RAM voltage "setting", but not the actual juice going to it.
    Oh, well. Must just mark it off as one less thing to worry about

  • P6n diamond/dual core center

    Hello, I am having a hard time getting this installed correctly(dual core center). After I get it installed it only shows info for my 8800 card none for my motherboard displays a error message saying m/b driver did not install. Ntune installed the first time but only shows limited info, after uninstalling both utility's n tune won't reinstall and core does the same as before. Any help would be great!

    Sorry for the lame no info post above! I have filled out my signature with my system info, let me know if there is anything else I should put in.
    I could not find what version of DCC I am using but I hope it is the latest because MSI live update is telling me it is current.
    Where can I find the Moan guide you mentioned in above post?

  • Dual Core Center runs with strange noises

    Hello
    I just bought a new PC: MSI P45NEO-F (Motherboard) and GALAXY 9600GT (Graphic Card).
    I installed Dual Core Center since it was provided as an utility software.
    As soon as  Dual Core Center is running, strange noises come out from the speakers and they never stop until I close the application. I have to switched off the speaker because it is unbearable. Except the sound from the speakers, computers is working OK. Even Dual Core Center with this noise seems to work.
    I am not an expert at all.
    Does anyone had this problem or would know where it comes from ?
    Computer seems to work OK when Dual Core center is not running.
    Thanks

    Hello
    I just had another look at my problem and I noticed that one of the figure displayed in Dual Core Center was in red. It is the fan speed of system1 in the Fan Menu: the number in red was 995 RPM. As soon as the figure goes above 1000 (it does happen from time to time) the figure becomes green and the strange noise stops.
    I have two fans in my computer: the CPU fans whose speed is around 1530 and the System1 fan whose speed is around 995 RPM. There are some setup in the BIOS regarding Fans but I guess everything is properly setup.
    Anyway is there anything wrong with a fan system1 speed below 1000 ? Why would Dual Core center put the figure in red in that case and make a noise as a warning ?
    Thanks for your help/advices.

  • Dual Core Center Fan Speed Control

    Hi Everybody,
    I have just bought a P35 Neo2 FR motherboard which is great but i have a question about the dual core center software.
    I have installed the dual core center software and disabled 'CPU smart fan target' in the bios, but once i have set the CPU fan speed i can't save the settings as the button is greyed off.
    Can anybody help me please..

    Use speedfan and dump dualcorecenter !
    It's infamous, lotta people having troubels with the  program.
    Search around on this forum and seee how many complaints there are about the  program.
    Including me.

  • Is there any way to monitor CPU temp without Dual Core Center

    I hate Dual Core Center it has done nothing but lock my system up is there any alteranative to monitor CPU temp/Fan speed

    Quote from: Maesus on 21-March-07, 23:34:06
    I use speedfan... but for Core 2 Duo, I don't think I have to worry about the CPU temp anymore... they are really coooooooooooooll
    Does anybody have an idea what the optimal temperature range for core duo cpu:s are? I used to have an Athlon XP, which was typically 65 °, now the my E6600 is running at 35-40 ° [celsius]. But where's the critical temperature where it burns?

  • DKA790GX Platinum, have problem with changing FSB in Dual Core Center

    Hello guys, freshblood is here,
    I change fsb in Dual core center, but unfort.  core temp and CPUZ don't reflect any changes.

    I agree.  The BIOS gives you better control with better options.
    Quote from: Jack the Newbie on 26-January-09, 02:14:05
    Dumb MSI Dual Core Center.  It is not the best tool ever developed.  Use the BIOS for overclocking your system.

  • P965Neo-F V2 MSI Dual Core Center Support

    Hi.
    I brought MSI P965Neo-F v2 MB and MSI 7600 GT graphic card, now i installed Dual Core Center and it shows only Graphic card info, is it some bug? i tryd core center and it showd me alot wrong info, like no cpu fan, sys fan 5k rpm and +12v was 24v. Anyone else having trouble whit DualCoreCenter utility?

    all other utilitys lie, 12v shows 24v, 3v shows 0,12, cant be real, and no fans at all:D

  • Dual Core Center doesn't work at all.

    My mobo is P35Neo2-FR. Cpu is C2D E4600. I didn't overclocked it. WinXP professional 32BIT is installed.
    .Net 2.0 is also installed.
    From some time, I cannot launch Dual Core Center program. When I double-click the Dual Core Center icon,
    There is nothing to be launched. I could not understand why the program suddenly didn't work.
    Please let me know the solution to successfully launch Dure Core Center program.

    yeah! my only experience with DCC is,... after it runs, it straight away turn on the siren, annoy the whole PC, and after 10 seconds, it shuts down my PC! That's the big annoyance already. The next time I reboot, I quickly terminate it from runnign longer, and straight away remove it from my PC. don't even bother to figure out where the alarm settings is.

  • P6N SLI V2 problem with "dual core center"

    I have the P6N SLI  V2 with E4400 and 7600gt running XP pro sp 2.
    after installing and running MSI's "dual core center" (including .Net framework) I only have the "VGA" option enabled, the "MB" option is disabled as well as the D.O.T option. I tried uninstalling and reinstalling as well as downloading the latest version, but I have the same problem. I get no MB options at all (like no cpu temp, fan speed, core speed etc.). I didn't make any changes to the BIOS yet (other than changing the boot sequence), and ideas?

    Quote from: nautica on 15-July-07, 13:19:02
    and ideas?
    A great one.
    Don't use MSI's utilities. Anyone here will tell you that.

  • MSI Dual Core Center

    Dual Core Center is a great tool but one thing that is annoying me is the FAN speed detector. I didn't plug fan into one of the header so Dual Core Center's alarm will be on all the time. Is there anyway to disable the alarm?

    Quote from: Salman on 19-November-07, 11:58:29
    no need to use dual corecentre friend ...use coretemp
    Kudos!
    Finally got a program now to monitor my Q6600...and the temps look nice I think:
    Core#0: 46°
    Core#1: 45°
    Core#2: 43°
    Core#3: 39°
    Tjunction is set to 100°

Maybe you are looking for

  • UI defaults for LOV on report not working?

    Hello, I have a table called CUSTOMERS and an associated lookup table called DISCOUNT (each customer is associated to a discount level). I defined a complete set of UI-defaults for CUSTOMERS, containing a LOV-definition for the column DISCOUNT_ID (wh

  • How to set the Range size dynamically in an Iterator?

    Hi, One of my scenrio, i read the range size of Iterator and i performed the business logic validation. But in my case, range size is changed as per business requriement for a paricular Iterator. Is it possible to set the Range size property dynamica

  • Problems publishing my iweb to mobile me

    HI, I apologise if anyone has answered this question before but I have not found a result which works for my problem. I have created a website via iweb. It seems to publish fine but when i go to my site after it publishes it, safari can not find my s

  • Number to a binary base number

    How can I convert a numeric data to a binary base number? Ex.: A into 0001010 Thank you in advance

  • Modify the Chart Display colors

    Hi, Is there a way to change the coloring of charts in VC? I tried to edit the GML file and change the "series" attribute of the chart element. I need to display the line in red color. I am using a combo chart of column+lines. When I edited the code,