Help - DVD/CD just went out!

This afternoon my DVD drive stopped loading/mounting cds/dvds. It took them in then just moved them in and out of the slot back and fourth.
I did the PRAM and it made it worse, now the DVD/CD's can't even go into the slot.
Any ideas on what's going on?
This came on suddenly with no warning or symptoms.
Thanks in adance for any help.

Well, it was toast. Have know idea why it went bad.
A local Mac repair shop replaced it with an upgraded 8x mce drive with mac drivers for $145 plus $75 labor in 4 hours.
Apple wanted waaay more time and like $700 for their drive. NOT.
So, for a tad over $200 I ended up with a nice upgrade and no hassles. Though it would have been nice if it hadn't just quit after very, very little use during the time I've owned the computer.

Similar Messages

  • Help, DVD/CD just went Bonky!

    I posted this in the DVD section but didn't get any suggestions - so I'm hoping someone here may have some clues that can help...
    My DVD drive suddenly stopped loading/mounting cds/dvds. It took them in then just moved them in and out of the slot back and fourth.
    I did the PRAM and it made it worse, now the DVD/CD's can't even go into the slot.
    Any ideas on what's going on?
    This came on suddenly with no warning or symptoms.
    Thanks in adance for any help.

    Well, it was toast. Have know idea why it went bad.
    A local Mac repair shop replaced it with an upgraded 8x mce drive with mac drivers for $145 plus $75 labor in 4 hours.
    Apple wanted waaay more time and like $700 for their drive. NOT.
    So, for a tad over $200 I ended up with a nice upgrade and no hassles. Though it would have been nice if it hadn't just quit after very, very little use during the time I've owned the computer.

  • I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

    I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

    Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
    G5 PCIe options are listed here:
    http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

  • Right Speaker in tablet/laptop just went out while playing music at 50%

    I was listing to some music on here trying out my brand new laptop i just got and the speaker on the right side just went out. someone please help me would like to get this resolved and fixed. I believe i have warrenty on this

    Hello Jared2489. Welcome to the HP Forums. I understand a speaker is not producing sound, on your computer. I believe the speaker is broken, but I would like to troubleshoot further. To assist you properly, I do require the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Locating the Model Number of the Computer
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Have you installed any new hardware on this computer, before the issue appeared?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    If you are unsure of your product's warranty status, please visit this HP website: HP Warranty Check
    Please respond if you require further assistance. I'm only here to help!
    Mario
    I worked on behalf of HP.

  • My power just went out for a few seconds- is there any way to restore the document I was working on?

    My power just went out for a few seconds. Is there any way to restore my document? I had already had 2 hrs worth of work for an interview tomorrow and do not have time to start from scratch?

    UPS
    http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
    Mac OS X Forum
    https://discussions.apple.com/community/mac_os?view=discussions
    Recovery Mode
    http://support.apple.com/kb/HT4718
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    http://www.apple.com/support/timemachine
    General purpose Mac troubleshooting guide:
    Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
    What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
    Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems:
    Isolating an issue by using another user account
    Identifying resource hogs and other tips:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode":
    Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems:
    Apple Hardware Test
    General Mac maintenance:
    Tips to keep your Mac in top form
    You should have TimeMachine saving your work, YOU need to be doing Save As somewhere else as you work, you don't say what application and whether you have Lion 10.7 or later (10.8.4)
    Can't say enough for the importance of using a UPS. Get one and plug your modem, router, computer into one and don't worry about data loss and lost modem or corruption or the effects to electronic devices.
    This forum deals with a desktop/tower 65lb Mac Pro
    http://www.apple.com/support/macpro

  • Half my Powerbook G4 Display Just Went Out!

    My promblems started in June when I got one vertical line. In July I got another.
    Now, Half my screen just went blank. No vertical lines. Nothing. Just several fat pink lines in the middle (about 2 inches across) and the rest of my screen is white!
    My 17" screen has now been converted into a 8" screen! When will this end? When will Apple do something about this?

    I hope you're right, but I'm not optimistic. It's hard to imagine that any amount of jostling of the outside of the Powerbook could disturb the display cable inside the hinge without causing visible external damage, but it's not hard to imagine heavy pressure on the display while in transit damaging the LCD panel. I gather that the Powerbook wasn't well packaged on the plane, and may even have been in a piece of checked luggage. That would certainly be a recipe for disaster.
    The "bizarre proprietary screws" used in Powerbooks aren't proprietary at all. They're standard Torx screws, and any good hardware store should have drivers to fit them. You'll need a Torx T-8 and, if you get into the interior of the machine, there are some Torx T-6 screws as well as Phillips #0 screws in there. You're right to wait until you can get the appropriate drivers, though — the screw heads are quite soft and easily stripped if you use the wrong size or kind of screwdriver in them.

  • Help my ipad2 just went blank other than time at the top. I can't even turn it off, Help my ipad2 just went blank other than time at the top. I can't even turn it off

    My ipad2 just went blank, it won't let me turn it off or anything. All i can see is the top bar with providor, time and battery! Any ideas what to do??

    Hold the home button and the power button at the same time until the screen goes all black and then hold the power button until you see the apple.

  • DVD's just spit out, how do I fix this on iBook G4

    I just bought an iBook G4 from eBay and I need to know how can I get any DVD's to play without having to buy an external hard drive? I have videos that I need to watch and I need to get this fixed asap.

    You may have to get & use a quality DVD player cleaning disc
    to see if the lenses in the iBook can be the source of this issue.
    Did the computer include the operating system install DVD?
    That should also be an important part of the purchase, also
    the 'original install-restore' DVD media discs, w/ gray label.
    There are a few things you could try, in addition to cleaning the
    optical drive player's lenses, that may help. An external DVD
    drive may or may not work. USB2.0 or slower could balk. And
    if you need to boot from a System DVD, that won't work; may
    need a FireWire based DVD combo or superdrive (hard to find.)
    Some have suggested to reset the PRAM (NVRAM) using all four keys on
    startup to force this to occur; & let the computer start sound (bong) 3 times.
    "...to reset or 'zap' the PRAM - hold down the Opt + Apple + P + R keys immediately on
    startup - Continue hold the keys till you have heard three bongs.  Test the drive again."
    •My Optical Drive ejects discs after I insert them - iBook G4 12" 1.33GHz - ifixit.com:
    http://www.ifixit.com/Answers/View/6415/My+Optical+Drive+ejects+discs+after+I+in sert+them.
    However, some suggest that you reset PMU (power management unit)
    •Resetting PowerBook and iBook Power Management Unit (PMU)
    http://support.apple.com/kb/HT1431
    Hopefully this will help. Various hardware issues are a reason why auctions are not
    an ideal place to buy a previously owned Mac. Companies who repair or sell them
    directly to a customer, online, offer greater value, set price, & a limited guaranty.
    Good luck & happy computing!

  • TS1363 Please help my phone just went black and will not go on.

    Help my phone went black and do not whant to switch on i bought this phone 3 weeks back vrom a lady and gave my samsung s4 to my wife se will kill me if i ask her for new phone the pone.

    You sure the battery is not out of power?
    Try doing a Restart/Reset.  In this case, it would be the Reset procedure if it does not turn on normally.
    http://support.apple.com/kb/ht1430

  • My startup disk just went out in a puff of smoke...

    I just (accidentally) dragged the first volume (which is my startup volume) of my FW HDD from the sidebar of a Finder window onto the desktop, where it disappeared in a puff of smoke. Everything is still running smoothly, but is there anything I can do to make it appear again (in Finder windows) with restarting, and is there anything potentially serious I should be concerned about? (Will that volume appear as usual when I restart?)
    I just want to be sure everything's gonna be OK!

    Went to Go->Computer, and dragged it back to the sidebar. All's well!

  • My Nano's screen Just Went Out

    And I've had it for 17 days. I treated it very nicely, and now the screen just wont turn on. iTunes wont recognize the nano, but my computer will acknowledge that it's plugged in. I can't seem to get it to play any songs, but it's kind of impossible when you dont even know if it's on or not. Anyway, I'm hoping to get a refund. This is unfair.

    check for "hold" button
    if it doesn't work, just exchange it, you have 1 year warranty, and there is a plus YOU'll GET BRAND NEW iPOD without scratches if you have any.

  • Macbook pro powercord recall free replacement it just went out

    Power cord not working was there ever a recall

    If there was, it would be on Apple's website and/or Knowledge Base.  Did you search at those places? 
    If you have AppleCare, give them a call and let them deal with it.  If not, take your MBP to your local Apple Store or AASP.  Let them properly diagnose the problem and provide you w/a repair estimate and/or check out the following:  CLICKY CLICK------> Troubleshooting MagSafe Adapters

  • My backlight just went out -- LED? -- why and what to do?

    Isn't the backlight in my 2009 13" Macbook Pro an LED?
    Any advice on anything to try, and where to take it?  Price of repair??
    Thanks!
    SH

    You can take your computer in for repair to any Apple Store or an AASP.  As for the cost of repairs, ask the repair shop for an estimate.  No one here can tell you how much it will cost because none of us has examined your computer, know what is wrong with it not know the taxes and labor costs in your country, city, state, etc. 

  • Panic! My G5 just died (fuse went out at my office and now it wount start)

    A fuse just went out in my office so all the power went out including the power to my G5!
    Now when the power is back on the G5 refuses to start, when I push the on button I just here a clicking sound and then nothing and the light by the button goes on as long as i push the button.
    Is my G5 toast or is there a fuse in the computer that has been blown?

    Well - you could try a PMU/SMU reset. Can't remember if your G5 has a PMU button - but the process in detail and a few more suggestions here
    http://discussions.apple.com/thread.jspa?messageID=3084827#3084827

  • I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!

    I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!

    Hello 74birdy
    The article below will assist with troubleshooting your iPhone not responding.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for

  • RSADRLSM02 -problem

    Hi all, I'm starting migrating a address base into my system via LSMW and RSADRLSM02. I have some basic problem with this program RSADRLSM02. I don't know where to fing logical patch to log file. In specyfing files I configured converted data to be s

  • No system information found in LMDB

    Hello dear Forum, I'm facing a problem when register an ERP6.0 IDES system(ES8) to solman 7.1SP11(SMP). I run rz70 in the ERP system and then I find this technical system in SLD, as follows: But until now I haven't find this system in LMDB, the SAP_L

  • Could not create ~/Library/Application Support/Adobe/CoreSync

    On my MacBook Pro, I'm using Chrome as my web browser, and I wanted to try Adobe Photoshop CC with a free trail, but first I have to I download Creative Cloud. And I did, successfully, but when I go to install a free trail of Photoshop CC, I cannot a

  • Graphing Issue - Line Graph

    I have a line graph that shows two lines. At each data pont they display the value. Is there a way to turn off the values being displayed for 1 of the lines and not the other? Thanks!

  • Date in sap

    HI All, We have hired an employee on 01012009 but system is showing like 01013000. I have changed  with T-Code PA41 even though its coming same . Can any one please reply with solutions? Regards, Chandra