HELP! DWCS3 won't display DW8 text on my Mac

I recently got DWCS3 (v9.0) on a Mac and had been using
DWMX2004. My HTML pages displayed fine in DW8 but when I moved them
to DWCS3 the main table cells do not display correctly. Does anyone
know what is going on. I can see half the text on my page but the
rest is blank. Is there an easy fix for making my pages display as
they did in DW8 or DWMX2004? Again I am on a Mac and am not a
tech-type. I am a designer who knows how to cut and paste code but
I would need some help. I know there is a fix for the PC that
allows one to view files as if they were in DW8. But I need a
step-by-step guide if possible as to how it should be set up on the
Mac. Please help me find a fix.
Thanks
Eph

I'm tapped. Have you tried submitting a trouble ticket for
one of your
one-on-one support incidents?
http://www.adobe.com/support/programs/dreamweaver/index.html?tab:contact=1
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"epholio" <[email protected]> wrote in
message
news:f837a8$inm$[email protected]..
> Still not working. Not sure what it could be. Here is a
screenshot of what
> I
> see.
>
>
http://www.epholio.com/ttscreen.jpg
>
> Notice how the main area is blank. This is the large
area of white. I have
> checked the code and again it displays perfectly in
DW2004 but notso in
> DWCS3.
> I read in other posts about a Windows fix to the Mac
equivalent of
> Preferences
> that allows users to view files in DWCS3 the way they
did in DW8 but
> nothing
> substantial about what needs to be done Mac-side. Hmm?
>
>
>

Similar Messages

My iPhone 5 won't display smart text options.

My iPhone 5 won't display smart text. It did when I initially downloaded the new OS, now those options don't appear at all. Did I click something to make them disappear?
I went into Settings to see if there was a component of it within Messages. I don't see anything.
Thoughts please.....
Thanks much
Ginger

Awwww......that's it....the dash! I tapped it. Tried to drag it up/down and it didn't move. Now I swiped and it's back!
So I need to remember to drag up/down and now swipe.....
Thanks much!
Ginger

Premiere pro won't display or play audio on Mac os 10.9

premiere pro won't display or play audio on Mac os 10.9; we are uploading AVCHD mts file format video clips from a Canon camcorder. we get message : "Dolby Audio licensing decode restriction."

next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

WRT54GS router setup page won't display most text

So I bought a new Linksys WRT54GS v6 wireless router yesterday, and I was able to set it up to share my DSL line, but when I went to the router setup page (192.168.1.1), it wouldn't display most text. It displays text in the entry boxes, but there are no links or other text on the page. I took a screenshot which can be seen here: http://img87.imageshack.us/img87/3390/routersetuppagemc1.jpg
Does anyone know what I can do to solve this issue?

Hey Merugo. I was having the same problem with the router settings screen refusing to load for my WRT54G. Do you happen to have v.5 of the router? After digging around in the help files on the site, I found this for firmware recovery for the WRT54G v.5 and it fixed the problem I was having once it loaded the updated .bin. Blank screen be gone.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3176
(The first time the router tried to load the new .bin it timed out. And the second time it installed correctly though it didn't display "Upgrade Success" like it's apparently supposed to.)
Hope this can maybe help you since it fixed things for me.Message Edited by Res on 10-03-200606:44 PM

Contact Form won't display input text

Hi,
I'm trying to create a flash contact form that sends the
user's message on enter key. Therefore I need you to help me do
this and also help me understand why my form isn't displaying right
when I have a mask for it.
To get a better picture of the problem
here you can
see how the form should look like and
here you can
see the same form, but with the mask

I'm not sure I understand what you mean by "embed the fonts
in each of the text fields"
Please have a look at the .fla file:
http://www.claudiudesign.org/test/sterg.fla
(this fla has the mask; if you remove it you will be able to
see the working contact form)
It won't take you more than 1 min to understand what's up
with it if your good at this.
Thing is I'm behind the schedule with this and I have to
solve the problem as soon as possible.
Thank You

Safari Mac won't display Rich Text HTML editor in Yahoo web mail

"Safari 3.2 (Mac)", "Yahoo email", "Compose Message" Toolbar, Rich Text (HTML) editor.
In Yahoo's Compose Message editor, I don't see the Rich Text (HTML) editor and its toolbar while using Safari 3.2 in Yahoo mail (classic). In Firefox, I see the Rich Text editor toolbar and it works fine.
I've searched on this forum, including Yahoo and others, and don't see this complaint. Is there something I've overlooked?
Is Safari Mac even capable of running the Rich Text editor in Yahoo email?

Hi Semi,
I found this in the Yahoo Mail Help:
How do I write in BOLD, italics or Color, or change font size?
On the Compose page, above the upper-right corner of the compose window, there's a link that either says Rich Text or Plain Text. Click this link to switch back and forth between the two. Since the link is the switch, you'll actually see Plain Text when you're in Rich Text.
In Rich Text, you can change the look of your message in a bunch of different ways. Again, since the link is there to switch from one mode to the other, if you see Plain Text, that means you're already in Rich Text! If you see Rich Text, click it.
The Rich Text toolbar appears above the Compose window.
Spell check
Going from left to right, the first button is the 'abc' spell-check button. Click it anytime to check your spelling starting at the beginning of your email. When you're finished, click Close.
Font and Size
Font: The Font button has two F’s on it. Click it to view other Font choices and select another Font.
Size: Click the button with two A’s on it to choose the size of type you want. Browse the menu and click the size you want.
Bold, Italics and Underline
B is for Bold, I is for Italics, and U is for Underline. Emphasize your point! :o)
To use these formatting tools, either click a button and start typing, or, select a block of text (or one word), and then click a button to format the text.
color
Text Color: Click the "T" button to see a palette of many colors. Select the text color you want, and start typing. Or, select a block of text (or one word), and then click the button to apply the color.
Background color: Want to give your text a background color? Either click the highlighter color you want and then start typing, or, select the text to which you'd like to add a background, then press this button to apply the highlighting color.
Emoticons
Add emotional oomph to what you say by selecting from the list of graphical emoticons.
Links and Lines
Globe with Links button: Insert a web site link!
Line button: Insert a horizontal line. Handy!
Alignment
Choose from flush-left, centered, or flush-right text alignment.
Lists
Bullets and Numbering button: create bulleted or numbered lists.
Indenting
Decrease Indent: Place the cursor where you would like to move the text to the left and click the "Decrease Indent" button.
Increase Indent: Place the cursor where you would like to move the text to the right and click the "Increase Indent" button.
Yahoo hasn't the best rich text editor out there for e-mail. Why not use Mac Mail... so much easier and supports RT. Yahoo having laid off personnel, I doubt if their internet based mail client sees much in the way of improvement anytime soon.
Carolyn

Edited button instance won't display my text

I've added a button (from Flex Components) to my canvas then
double-clicked that instance to change the text and create an over
state. I changed the text from 'Button' to 'Normal' in State 1 and
'Over' in State 2. However, when I exit the editing view and go
back to my canvas, the button text reverts back to 'Button'. Have I
done something wrong?
Thanks,
Jim

jcbluesman wrote:
> I've added a button (from Flex Components) to my canvas
then double-clicked
> that instance to change the text and create an over
state. I changed the text
> from 'Button' to 'Normal' in State 1 and 'Over' in State
2. However, when I
> exit the editing view and go back to my canvas, the
button text reverts back to
> 'Button'. Have I done something wrong?
>
> Thanks,
> Jim
>
You should be using the Symbol Properties panel for this.
There is a
field there for label, and you can change the visual
attributes for each
state there as well.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

When i try to log into my iPad on FaceTime or iMessage it says witch emails would i like two use and i check them. after that it just sends me back to where i started. that is really annoying. please help it won't let me text or FaceTime !!! please help!!

help

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

Can anyone help me solve the problem of text displaying very rough on my new ASUS PA279Q display monitor running off my MacBook Pro?

This is regarding a brand new ASUS PA 279Q, 2560 x 1440 IPS monitor. I'm connected via mini display port (into thunderbolt port on MacBook Pro) to display port on ASUS monitor; using cable ASUS included with the monitor. Mid 2012 MacBook Pro…full specs at bottom of this post.
I have resolution set at 2560 x 1440 which is the native resolution according to the ASUS spec. I tried the other resolutions available in my System Preferences and text displayed rough with those settings too. I've tried adjusting contrast, brightness and sharpness via the ASUS control panel and didn't solve the problem. Also tried calibrating via Mac's system preferences/display and that did not improve text display either. All the text on this monitor (no matter what software I launch, Finder, InDesign, Illustrator, MS Word, Excel, VMWare Windows XP, Windows versions of Word, Excel, Acrobat, etc, all are consistently rendering text the same way --- ROUGH and with "HALOS" around each letter.
All point sizes of text and at various scales, display very rough on the screen. (My comparison is the retina display of my MBP and a Thunderbolt…so those two displays are my expectations.) I'm using the same MBP for both a Thunderbolt display (at work) and this ASUS at my home office.
On the ASUS it's not as noticeable when the text is on white backgrounds, but I'm a graphic designer and compose images with text all day everyday. Not to mention the specs on this ASUS PA279Q indicate it's built for the professional so I would expect better text rendering. I haven't even addressed color calibration and balance yet, because that won't matter to me if the text won't display any better than it is now.
I was so hopeful after researching all the specs on this monitor it would be a viable alternative to the glossy display of the Thunderbolt display. (Which, I do love the Thunderbolt display for it's clarity and how it displays crisp, clean text at all sizes. (This ASUS actually displays text decently if I increase the text so each letter is about 4" high. Which is pointless for practical purposes -- that'd be like doing page layout through a microscope!)
I kept holding off on getting a monitor for the home office thinking the Thunderbolt would be updated soon. I'd be sick if I dropped a grand on piece of 2011 technology only to learn a few days later an updated Thunderbolt display hit the market! Not to mention, I'm praying Apple comes out with a less reflective Thunderbolt display. The glare and reflection is the main reason I looked elsewhere for a large monitor; hence my asking for help. Hoping the ASUS text display issue can be worked out. My expectation is for it to display like the MBP retina and Thunderbolt display text. That possible?
Alternatively, I guess I could do the Apple Refurb Thunderbolt at $799. And see if there's a decent aftermarket anti-glare I could stick on it?
Thanks for reading my post. Hope someone can help; offer any suggestions? Words or wisdom?
Has anyone else had similar issues and figured out a resolution? Help!
MacBook Pro
Retina, Mid 2012, 2.3 Ghz Intel i7
8GB 1600 MHz DDR3
OS X 10.8.5
NVIDIA GeForce GT 650M 1024 MB
ASUS PA279Q

I uninstalled those two items. It still runs slow on start-up and when opening safari, firefox, iphoto, itunes, etc. It's not snappy like it used to be. Any other ideas? Thanks.

DW8: image won't display in Design View

Folks:
DW8 on MacOS 10.4.8 (fully updated) on Intel iMac.
What would keep an image from displaying in DW Design View?
What are the causes of the grey box with the superimposed "X"? Is
there any diagnostic output that might help? Is the grey box and
"X" substituted by DW8 for an invalid or un-drawable graphic, or is
this done by the OS?
The problem:
I've got a 1912 x 1481 graphic, a geographic map, in AI that
I'm trying to use as an ordinary web image, but DW won't display it
in Design View. Instead all I see is a big grey box and "X". For
test purposes, I'm starting from a new "Basic" HTML web page and
all I'm doing is inserting this one image. I need to get this
working so I can draw hotspots on this graphic to make it
"clickable" .
Here's what I've tried:
o Triple-checking that the inserted image reference is
correct. Yes, the image file is correctly linked. With the image
selected, the inspector shows a tiny but recognizable miniature of
the expected image. Further, when the page and the image are
uploaded to the web server and I look at it via a browser, the
expected image is _always correctly displayed.
o Exporting the graphic "for the web" from AI as both a GIF
and a medium-quality JPG. Neither of these are displayed in Design
View; both are served up correctly after being uploaded
o I found a larger JPG on a different site I'm managing. This
always displays as expected in both DW Design View and when served
up. I substituted the failing map JPG image. The result: A grey
box.
o Checking the map images: The JPG and GIF versions seem to
be visible in all environments (image readers, browsers, etc.) I've
checked _except_ DW8 Design View.
o Checked on another system. I made the failing image
available to a very helpful ACE, who performed a similar
experiment. It worked fine for him. I used his exact HTML and
directory structure -- and it failed for me. Grey box with "X".
It seems to me that I've checked most of the obvious
possibilities. Now it is time to check the less obvious ones.
Suggestions are very welcome!
Thanks,
Henry

Randy:
Thanks for your response.
This is a virtual memory system, so -- in theory-- it should
accommodate anything that will fit on the hard drive, more or less,
if I'm wiling to wait the hours (days?) it will take to swap on and
off the disk. That assumes DW8 takes advantage of the capability.
It may not.
"Larger"? The JPG image I compared to is 1692 x 2160 pixels,
but weighs slightly less, 289K bytes. I'm losing track of all my
test images that fail, but a representative one is 1912 x 1481
pixels and weighs 332Kb on the disk. "Roughly comparable" might be
a better description. The point is still reasonable: DW8 does
handle images of this size on my system.
One issue that occurred to me recently is that I may have
caused some grief by monkeying with the "Save for web" settings at
the Illy export. Perhaps I asked for some configuration that's
normal for Illy to export --or it would have warned me, I hope--
but too strange for DW to grok. DW should complain more
informatively than painting a gray box and "X" when that happens, I
would think.
Henry

Uprgrad to ios7 calender won't display text entered. the appointment entered is there becauwse it alerts me to appointments entered

Calender won't display text entered for appointments.
The appointments are there as the phone alerts me as requested. Also the appointments are synced with icloud and Outlook on my computer.
Any appointments entered in computer do not show on phone but are there.

I've managed to fix this!
In case it's helpful to anyone encountering this problem, here's what I did.
I went into the preferences (through the Calendar app, not the System Preferences - didn't want to remove the entire account info, in case I encountered problems getting my email to link again), clicked on the Account tab and removed the Exchange account (by clicking the "-" (minus) sign below the listing of accounts). I then added an account (clicking the "+" sign) and re-entered the information. When asked if I wanted to add these settings for Mail and Contacts, I unclicked those options (bc they're already installed and work fine). Once I completed the information, I closed the settings window, and hit ⌘+R to refresh and all the Exchange appointments appeared.

The memo field in forms won't display text?

I am using Firefox 33.1.1 on a WindowsXP Pro system and have been using FireFox for quite some time . . .
Recently, I must have done something, I just don't know, but I can't seem to remedy the problem.
I create and use a lot of forms. Standard <form></form> HTML forms.
Whenever I pull up a form, I can no longer see any text as I type into the MEMO field. I also don't see any contents of the MEMO field when I recall a record fromn the database within the form.
This is happening ONLY with the MEMO field.
This very message I had to type in notepad and copy and paste it into this bug report form.( OMG - when I pasted this text into this form, I can see the text!! But still not in other forms)
YET, the text is indeed in the form. This text will display when recalling a record to the webpage and displaying the memo field contents on the page.(Not in form)
I have done all I can according to FireFox problem resolution suggestions including uninstalling and reinstalling a fresh pristeen copy of Firefox to a diff location on HD.
I do NOT have this problem when I go into Windows IE. I know there is no problem with the form itself or database contents. This happens on ANY memo field at ANY website, not just mine.
I cannot say if this began after an FF update or not. I feel it may be a simple fix. I may have hit a key or combination of keys that changed a setting causing this, but I dont know where.
Any clues would be helpful.
thanks
jim

Try to disable OMTC and leave hardware acceleration in Firefox enabled.
*<b>about:config</b> page: layers.offmainthreadcomposition.enabled = false
*http://kb.mozillazine.org/about:config
You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
This can be a problem with the font that is used to display the text.
You can do a font test to see if you can identify corrupted font(s).
*http://browserspy.dk/fonts-flash.php?detail=1
You can try different default fonts and temporarily disable website fonts to test the selected default font.
*Tools > Options > Content : Fonts & Colors > Advanced
*[ ] "Allow pages to choose their own fonts, instead of my selections above"

Layered text and graphic in Word won't display when converted to PDF

I have several simple shapes with text layered in front in my Word document. After they are converted to PDF using Acrobat XI, only the shape will display. I can tell the text is still there, because I can use my cursor tool to select it, but it won't display visually. It looks like it isn't there but it really is. One bit of text is even an internal link, and the link still works but I can't see the text I'm clicking on.
If anyone has any suggestions I'd appreciate it.
Thank you,

Hi Lori - this was perfect! It was an issue with the layers being misordered. I used the Edit Text & Images tool listed under Tools > Content Editing, found the layers, then by right-clicking I was able to bring the text to the front and it all looks great now.
I would like to know why this happened, or if not why, how I could make sure it doesn't happen again. If there's a check box or other setting I could use to remove this problem that would be fantastic.
Thank you so much for pointing me in the right direction!
-Scott

Help please. Extended display won't work on MBP and AOC 20" 1600 x 900 60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

Help please. Extended display won't work on MBP and AOC 20" 1600 x 900 60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

I have the same mini display port adapter and Belkin DVI-HDMI cable (but a Panasonic 42" Plasma HDTV) so just set this up on it to see if I could duplicate your problem, unfortunately for you (but good for me) I can't.
I connected the adapter+HDMI cable before switching the HDTV on and then powered up the MBP. It (the HDTV) came up with my background right away (it's set at Mirror not extended Desktop) and when I run System Preferences/Displays get the following. Sorry but all I can confirm is that adapter+cable combination should work ...
Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys?

Search Help in Webdynpro displays specific text in German language

We have created a custom search help which is being displayed using a custom Webdynpro application. We found that for this search help, although all other texts are displayed in English, a specific text ( 'Show filter criteria' ) is being displayed in German. Also, the same problem exists for search helps used in certain standard Webdynpro applications as well ( eg. WDT_FLIGHTLIST, TEST_DDIC ). Is there any SAP note to address this issue?

Hi,
see SAP note 1050954
Regards, Heidi

HELP! DWCS3 won't display DW8 text on my Mac

Similar Messages

Maybe you are looking for