Help! Eclipse Adapter Caused Kernel Panic
I tried to add a USB monitor to a Mac mini at church and it has a kernel panic.
I have a Mac mini at home and tried to set it up for service and loaded the same driver. It caused the same kernel panic.
So now I have two Mac mini computers that can only be opened in Safe Boot.
It is a Eclipse SEE2 Xtreme UV250. There is a warning to install drivers first before connecting the adapter. I didn't see it (dummy!)
Sat Aug 31 19:14:40 2013
panic(cpu 1 caller 0xffffff8007cb8655): Kernel trap at 0xffffff7f8828801f, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff808700dcde, CR3: 0x000000001e14602e, CR4: 0x00000000001606e0
RAX: 0x0000000000000004, RBX: 0x0000000000000004, RCX: 0x0000000000000000, RDX: 0xffffff808700dcde
RSP: 0xffffff808725b960, RBP: 0xffffff808725b9a0, RSI: 0xffffff808700dcde, RDI: 0xffffff8013af3b00
R8: 0x00000000000003fc, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0xffffff80bde8f0ec
R12: 0x0000000000000004, R13: 0xffffff80bdb8f0ec, R14: 0x0000000000000004, R15: 0xffffff80bdb8f0f4
RFL: 0x0000000000010202, RIP: 0xffffff7f8828801f, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff808700dcde, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff808725b600 : 0xffffff8007c1d626
0xffffff808725b670 : 0xffffff8007cb8655
0xffffff808725b840 : 0xffffff8007cce17d
0xffffff808725b860 : 0xffffff7f8828801f
0xffffff808725b9a0 : 0xffffff7f8828a7d6
0xffffff808725ba00 : 0xffffff7f8828c234
0xffffff808725ba60 : 0xffffff7f884e49b8
0xffffff808725baa0 : 0xffffff7f884e7428
0xffffff808725bac0 : 0xffffff7f884eb078
0xffffff808725bae0 : 0xffffff800804907a
0xffffff808725bb40 : 0xffffff80080663cb
0xffffff808725bbc0 : 0xffffff80080683f3
0xffffff808725bc20 : 0xffffff8008065e2f
0xffffff808725bd70 : 0xffffff8007c98c01
0xffffff808725be80 : 0xffffff8007c20b3d
0xffffff808725beb0 : 0xffffff8007c10448
0xffffff808725bf00 : 0xffffff8007c1961b
0xffffff808725bf70 : 0xffffff8007ca6536
0xffffff808725bfb0 : 0xffffff8007cce9e3
Kernel Extensions in backtrace:
com.apple.iokit.IOHIDFamily(1.8.1)[F0B6DA72-B1C1-3816-AC9F-5F1C12E8A7DD]@0xffff ff7f884c6000->0xffffff7f88532fff
dependency: com.apple.driver.AppleKeyStore(28.21)[A07AF045-127B-3CD5-90C9-7ED8AE353525]@0xf fffff7f884b8000
com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f88281000->0xffffff7f882b8fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f88246000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide: 0x0000000007a00000
Kernel text base: 0xffffff8007c00000
System model name: Macmini6,1 (Mac-031AEE4D24BFF0B1)
System uptime in nanoseconds: 60707551475
last loaded kext at 55279913493: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f89819000, size 28672)
loaded kexts:
tw.com.mct.MCT_Trigger2 2009.06.16
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.7fc4
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AGPM 100.12.87
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.driver.AppleBluetoothMultitouch 75.19
com.apple.iokit.IOBluetoothSerialManager 4.1.4f2
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMuxControl 3.4.5
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.IOBluetoothUSBDFU 4.1.4f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleLPC 1.6.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleIntelHD4000Graphics 8.1.2
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.driver.AppleIntelFramebufferCapri 8.1.2
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.AppleUSBODD 3.1.7
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.iokit.AppleBCM5701Ethernet 3.6.1b4
com.apple.driver.AppleSDXC 1.4.2
com.apple.driver.AppleUSBHub 5.5.5
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.5.2
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBXHCI 5.6.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.IOBluetoothHIDDriver 4.1.4f2
com.apple.driver.AppleMultitouchDriver 235.29
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.4f2
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IOAcceleratorFamily 74.5.1
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.9
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.driver.AppleUSBHIDKeyboard 170.2
com.apple.driver.AppleHIDKeyboard 170.2
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.driver.AppleThunderboltNHI 1.7.8
com.apple.iokit.IOThunderboltFamily 2.4.0
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 530.4
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBFamily 5.6.0
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Similar Messages
-
DVI to HDMI adapter causes Kernel Panic
I am trying to connect my Macbook Pro (Santa Rosa chipset) to my 1080p HDTV. Whenever I connect my DVI to HDMI adapter, I get a kernel panic. The same setup works fine on the Bootcamp side of my mac. Any ideas?
*My HDTV:*
http://www.oncorpus.com/Product/LCDTV/40LC45S.htm
*My Mac:*
Macbook Pro (Mid 2007)
NVIDIA GeForce 8600M GT
*My Adapter:*
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10419&cs_id=1041902&pid=2029&seq=1&format=2i have the exact same problem. same TV. my macbook pro is the early 2008 model, which has the same graphics chip. I have a feeling it is just the graphics chip is faulty in some way. I have an appointment tuesday and ill see what they say, i'm going to try and get a new gpu.
the exact same set up we're trying works with different tvs, and setups with different computers works with this TV we are dealing with (40" proscan)
i'm going to try this on my brothers new macbook pro 2009 model and see if it works, if it does then its got to be the graphics chip. -
Help! RAID causing kernel panics
Help! My Xserve RAID seems to be behind a bunch of kernel panics on my server. Whenever I try to access the volume, I get a kernel panic stating "HFS: truncate file didn't". This happened yesterday too, and I spent 5 hours running disk utility on the volume, which came up clean, and it hasn't fixed the error. Do I need to delete the array and restore the data? I'd rather not... Any ideas are appreciated.
OS X Server 10.2.8, XServe dual 1GHZ g4, 1st gen XServe RAID.[resolving kernel panics|http://www.thexlab.com/faqs/kernelpanics.html]
Thomas Reed -
RAID mirror with software utility caused kernel panic every time
Using disc utility to make a mirror of 2 drives, click create and i get kernel panic and have to power off machine. if i try to start the machine with either of the two disks in it (together or individually) i get same kernel panic and have to power off.
The disks are in an external storage array (sonnet d500). I have a second storage array with raided disks in and i have raided disk inside the mac too. these all work fine..
originally 2 weeks ago i had the 2 disks working in a group of 4 disks set as a mirror of 2 striped disks. One disk in this setup failed and with this config you can never 'recover'or rebuild it - you get a degraded mirror and you can backup the data, but you must completely rebuild the raid again as the mirror of stripes never lets you add a new disk in again.period. not good.
I replaced the failed disk and rebuilt the mirror of stripes. this lasted a day until a second disk failed (all 4 were bought at same time so i was kind of expecting that to happen once one failed).
i replaced the second faulty hdd and thought about my disk usage and decided i would not make another mirror of stripes and i would make 2 mirrors instead for safe-ish storage and then transfer data to a striped raid set for editing from instead of direct from the mirror of stripes volume.
i tried to delete the raid but got a kernel panic
if i started the machine with any of the 4 disks i would get a kernel panic.
i moved the disks one by one into an older G5 running Tiger and managed to erase the raid info on 2 of them. The two new ones had some strange raid info and the Tiger machien thought there was an extra disk in the machine and would not erase or partition or allow me to destroy the raid whatever i tried.
I will be moving these now into an old XP PC to try to erase the boot records etc and erase them to be able to use them again in either mac pro or G5. painful..
so.. i ended up with 2 erased drives and have 2 new drives with dodgy raid info that causes kernel panics on the leopard machine and wont go in the Tiger machine.
The two erased drives are what ive now been trying to use in the mac pro to create a mirror - this now caused kernel panics when creating the mirror to start with and when installed in the machine at all. so i will be erasing them again in the tiger machine soon (its busy erasing with zeros another new disk that i added to the Tiger machine 2 weeks ago which seems to have some fault when raided!!! but thats another story).
so.. is anyone else having problems with creating basic mirror in 10.5.4 or is it just me??
i have a sonnet tempo e4p card with 2 external sata disk enclosures, latest firmware for the e4p card. all other previously existing raid volumes are working fine. i have one set of 2 striped disks, one set of 3 striped disks and one set of 2 stripes which are mirrored - all happy and working fine. but i cant make a new mirror of 2 disks...
I phoned Apple support and they said all raid info was kept on the disk itself and nothing on the actual machine and suggested i take the machine to an apple care centre for some tlc (although its disk i am having a problem with). since all my other disk arrays work fine i don't really want to rebuild the whole machine from scratch if i can avoid it.
Any suggestions of what i can try ??well it turns out the new disk i bought just werent any good. my g5 powermac raid mirror issue was related to one new disk with lots of bad blocks (speed tools showed that up) so i have learnt my lesson on cheap non raid disks for raid..
am waiting on a couple of new ultrastar enterprise disks to tuen up so i can go back to the macpro and try to add a mirror again.
i am still stuck wih several new disks that i cannot format now in the macpro on leopard or on the g5 powermac with tiger.
ive tried softraid and that cant do it, speedtools pcformat util cant do it, disk utility crashes when i try to eras them and diskutil from termianl starts then doenst get anywhere and my pc sata card doesnt work so my last resort pc option still doesnt help me clear the partition map on these drives - ones that diskutility on leopard made for me - and drives which still cause kernel panics on the macpro if i put them in it..
here is what diskutil says on my g5:
/dev/disk0
#: type name size identifier
0: GUIDpartitionscheme *465.8 GB disk0
1: EFI 200.0 MB disk0s1
2: Apple_RAID 465.4 GB disk0s2
3: Apple_Boot 128.0 MB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *233.8 GB disk1
1: Applepartitionmap 31.5 KB disk1s1
2: Apple_HFS Macintosh HD 233.6 GB disk1s3
/dev/disk2
#: type name size identifier
0: *465.4 GB disk2
/dev/disk3
#: type name size identifier
0: Applepartitionscheme *931.5 GB disk3
1: Applepartitionmap 31.5 KB disk3s1
2: Apple_HFS backup1T 931.4 GB disk3s3
/dev/disk4
#: type name size identifier
0: Applepartitionscheme *931.5 GB disk4
1: Applepartitionmap 31.5 KB disk4s1
2: Apple_HFS tempi 931.4 GB disk4s3
disk0 is the one with the bad partition info.
it thinks it has a double raid as the console shows on startup:
(both store45 and cache it thinks are on this disk - cache was my old mirror of stripes set on other machine, store45 was new name for my mirror, so seems like it hadnt deleted the original raid partition info before making new info which now kernel panics)
Jul 18 18:48:05 localhost kernel[0]: AppleRAID::degradeSet - starting the set "STORE45" (B9C48619-6B2C-4547-A01E-4864754EA7E2).
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::degradeSet - starting the set "CACHE" (64F914A5-5556-4A44-AEE2-DC437868766B).
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002c2 detected for set "STORE45" (C0E139A4-2A6D-49C6-8F77-202AF7F9285D), member 50207BE5-E487-410E-8E8E-C4C4DCD2687B, set byte offset = 999527018496.
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002c2 detected for set "CACHE" (64F914A5-5556-4A44-AEE2-DC437868766B), member C0E139A4-2A6D-49C6-8F77-202AF7F9285D, set byte offset = 999527018496.
so currently i have 2 new 500gb disks which cant be partitioned back to anything at all on either machine. looks like i will have to buy a new pc to reformat them..
any suggestions of how to clear the partition map info and get them back to freespace ?? -
Battery Update Causing Kernel Panics?
It seems that ever since I installed the Battery Update it's been causing Kernel Panics on my MBP. Three since yesterday in fact. Has anyone else been experiencing this?
MacBook Pro 1.83 GHz Mac OS X (10.4.9) 1 GB RAM, 80 GB HDD, ATI Radeon X1600Hmm I have seen multiple posts on the computer not booting the OS (gets to the grey apple with spinning gear screen) but so far I think you are the first I have seen reporting kernel panics.
Can you boot to the install cd? I'd try running the disk utility from the install disk and verify/repair permissions and verify the disk as well. (repair disk if verification fails)
Here is an article that may help ya:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214 -
Using 2 memory modules causes kernel panic
In early 2009 I upgraded my memory from 512 to 2 GB, 2 modules of 1GB each. This past January (just shy of 2 years later) I got a kernel panic. I tested running with a single module, and one module caused panic, the other was fine. Both slots function with the good module. So I got two new matched replacement chips from OWC, put them in and got kernel panics during the boot process. Yesterday I spent testing memory configurations and found this:
1. chip 1 alone runs fine and passes all Rember memory tests in slot 1.
2. chip 2 alone runs fine in slot 1 and 2, passes all memory tests in slot 2.
3. chips 1 and 2 together, in either slot, cause kernel panics before the OS is loaded.
Has anyone seen this problem? Will it go away if I use top of the line (Apple) memory chips?
When the kernel panics started back in January, an AppleCare advanced advisor said he had the same problem and he had to remove one module to stop the kernel panics. Running on 1GB doesn't work for me because I tend to max out the memory and programs like Mail, Safari, Photoshop, etc. become unreponsive all together.
thanks -I have spent more time on the phone with OWC about this than I care to remember. Their latest request is that I use an eraser to clean the metal contacts on the chips; if that fails, I get to send the chips back. Whether I get a refund or yet another set of replacement chips, I don't know. They are not experts on Apple machines, that is clear.
-
PS Extended CS6 causing kernel panics
I've been getting one or two a week. Haven't figured out yet what triggers it, but it only happens in CS6. I did recently reinstall the entire OS, so that's clean. Here's the latest panic info the reboot generates to send to Apple. Doesn't mean anything to me, other than the panic notation near the top of the info tells you what it thinks happened.
Interval Since Last Panic Report: 141469 sec
Anonymous UUID: 44199F46-5B6B-42C5-9E13-29CB09291223
Mon Sep 24 14:40:11 2012
panic(cpu 2 caller 0xffffff80002094e7): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.15.3/osfmk/kern/sched_prim.c:1471
Backtrace (CPU 2), Frame : Return Address
0xffffff8149e83d70 : 0xffffff8000204d15
0xffffff8149e83e70 : 0xffffff80002094e7
0xffffff8149e83ef0 : 0xffffff8000209acb
0xffffff8149e83f60 : 0xffffff800053b02d
0xffffff8149e83fa0 : 0xffffff80002c8527
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 26760035257178
unloaded kexts:
com.apple.iokit.IOFireWireSBP2 4.0.6 (addr 0xffffff7f80e4a000, size 0x73728) - last unloaded 25651433036012
loaded kexts:
com.aladdin.kext.aksfridge 1.0.2
com.dvdfab.kext.fabio 1
com.hzsystems.terminus.driver 4
com.microsoft.driver.MicrosoftKeyboardUSB 8.2
com.microsoft.driver.MicrosoftKeyboard 8.2
com.Logitech.Control Center.HID Driver 3.6.0
com.apple.filesystems.afpfs 9.7.1 - last loaded 23445647212129
com.apple.nke.asp_tcp 5.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.kext.ATIFramebuffer 6.3.6
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AudioAUUC 1.57
com.apple.filesystems.ntfs 3.4
com.apple.ATIRadeonX3000 6.3.6
com.apple.filesystems.autofs 2.1.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleUSBOHCI 4.2.0
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.Intel82574L 2.1.8b1
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.ATI5000Controller 6.3.6
com.apple.kext.ATISupport 6.3.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.driver.IOBluetoothHIDDriver 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacPro5,1, BootROM MP51.007F.B03, 6 processors, 6-Core Intel Xeon, 3.33 GHz, 16 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
PCI Card: pci104c,823f, sppci_ieee1394openhci, Slot-3@6,0,0
PCI Card: pci1033,35, sppci_usbopenhost, Slot-3@8,0,0
PCI Card: pci1033,e0, USB Enhanced Host Controller, Slot-3@8,0,1
PCI Card: pci1033,35, sppci_usbopenhost, Slot-4@11,0,0
PCI Card: pci1033,35, sppci_usbopenhost, Slot-4@11,0,1
PCI Card: pci1033,e0, USB Enhanced Host Controller, Slot-4@11,0,2
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: HL-DT-ST BD-RE GGW-H20L
Serial ATA Device: WDC WD1001FALS-41Y6A1, 931.51 GB
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: WDC WD3200AAKS-00VYA0, 298.09 GB
USB Device: Hub, 0x0409 (NEC Corporation), 0x005a, 0xfd300000 / 2
USB Device: EIZO USB HID Monitor, 0x056d (Eizo), 0x0002, 0xfd330000 / 3
USB Device: USB 2.0 Hub [MTT], 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0101, 0x40400000 / 2
USB Device: HASP4 USB 1.33, 0x0529 (Aladdin Knowledge Systems), 0x0001, 0x00200000 / 3
USB Device: SII Smart Label Printer 200, 0x0619 (Seiko Instruments Inc.), 0x0104, 0x00100000 / 2
USB Device: HASP4 USB 1.33, 0x0529 (Aladdin Knowledge Systems), 0x0001, 0xff100000 / 2
USB Device: HASP HL 3.25, 0x0529 (Aladdin Knowledge Systems), 0x0001, 0xfe200000 / 2
USB Device: Natural® Ergonomic Keyboard 4000, 0x045e (Microsoft Corporation), 0x00db, 0x1a200000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x5a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1d100000 / 2
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, 0xD016, Up to 200 Mb/secOnly OS bugs, driver bugs, or hardware problems can cause kernel panics.
Yes, that is normally the case. I brought this up here because while working in PS is the only time this happens. I know it doesn't make sense, but there it is.
Not sure why the crash report stated 10.8.0. It's incorrect on two counts. For one, I'm working in Snow Leopard, 10.6.8. I do have Mountain Lion installed on a separate drive for testing, but that already is at 10.8.2. Regardless, it's not the OS I was even in, so I don't know why it reported 10.8.0 as the kernel.
Anyway, I noticed (after posting this of course) that there was a 13.0.1 update for PS CS6. I applied that and we'll see how it goes from there as the update is noted as fixing a number of crashing problems. -
Airport causing kernel panics and kp in safe boot.
Last week I got my first kernel panic in years. It happened while I was asleep and checking an extrenal drive for bad blocks with TechTool. It turns out that the drive indeed had bad blocks and found that the cpu was shut down when I awoke. I started up the computer and it wasn't able to stay on for more than 10 min max before the next kernel panic. I checked here for more advice on kernel panics and started to try to narrow the number of culprits. Everything was unplugged and still kp. Instaled a new drive with a week older system from Time Machine and still kp. Reset NVRAM and replaced pyhsical RAM and still kp. Removed the Airport Extreme card and still kp. Booted into Safe Mode after all of the previously mentioned and still kp. I'm now going to take the drive and swap it into another body that I have to see if the root is actually on the drive on the physical hardware of the cpu.
I was interested in this thread and read all of the links that jpl posted. Airport causing Kernel Panic (?) Jason then replied that it had been solved due to a "permissions problem" I wish he gave more info on what exactly he did to resolve the problem as it's been almost a week now without any work being done for me.
I've also noticed this very strange behavior that might shed some light onto the issue. When I open System Prefs and close the window there is a strange colored pattern that will always flash after the window has been closed. I tried to post it to my me page but for somereason it wouldn't play for me so there's that and the YouTube version too.
https://www.me.com/gallery/#100008/Prefs%20Screen
http://www.youtube.com/watch?v=2zrTt88YdBo
In addition when the computer has started up and the system loads. Checking Activity Monitor shows that there are 50 or more threads active for the the kernel_task. Inspecting this doesn't seem to show any useful information.
Finally here are a few of the recent crashes I hope that someone might be able to shed some light on this extremely frustrating problem for me.
Tue Oct 25 18:54:16 2011
panic(cpu 0 caller 0x000AE584): "Uncorrectable machine check: pc = 00000000000A388C, msr = 0000000000141000, dsisr = 42000000, dar = 0000000000272008\n" " AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000\n" " L2FIR = 0000000000000000, BusFir = 0000000080000000\n"@/SourceCache/xnu/xnu-1228/osfmk/ppc/trap.c:975
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AE584 0x000AE804 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x2fc12c80)
PC=0x000A388C; MSR=0x00141000; DAR=0x00272008; DSISR=0x42000000; LR=0x000A37C8; R1=0x2E947B40; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x00000000 0x000A09C8 0x0009E2EC 0x0006B3C0 0x0006C728 0x0003BE1C
0x0029361C 0x0029364C 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x249dba00)
PC=0x9195435C; MSR=0x0000F030; DAR=0x00272000; DSISR=0x42000000; LR=0x00001FA8; R1=0xBFFFFB00; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: PubSubAgent
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
Tue Oct 25 19:09:54 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000FFFFFFFF PC=0x0000000000040DE4
Latest crash info for cpu 0:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEB88 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Wed Oct 26 15:31:02 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000FFFFFFFF PC=0x0000000000040DE4
Latest crash info for cpu 0:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEB88 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Wed Oct 26 22:17:42 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000010 PC=0x0000000000082EF8
Latest crash info for cpu 0:
Exception state (sv=0x2514ea00)
PC=0x00082EF8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00082ECC; R1=0x24F6BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718
0x0006C728 0x00296378 0x0030924C 0x000B24C8 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x2514ea00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2509d500)
PC=0x9194AF64; MSR=0x0000D930; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE9A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x2514ea00)
PC=0x00082EF8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00082ECC; R1=0x24F6BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718
0x0006C728 0x00296378 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x2509d500)
PC=0x9194AF64; MSR=0x0000D930; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE9A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Thu Oct 27 11:28:35 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000004 PC=0x00000000000848E0
Latest crash info for cpu 0:
Exception state (sv=0x248ff500)
PC=0x000848E0; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x000848AC; R1=0x30063BB0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718 0x0006C728
0x00296378 0x0030924C 0x000B24C8 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x248ff500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x248fd280)
PC=0x9194AF64; MSR=0x0000D030; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE7F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x248ff500)
PC=0x000848E0; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x000848AC; R1=0x30063BB0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718 0x0006C728
0x00296378 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x248fd280)
PC=0x9194AF64; MSR=0x0000D030; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE7F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Thanks in advance,
MaxMy vision is pretty poor, still cant see it, but...
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process. -
I have an old Agfa SnapScan 1212u USB scanner and up until today it has worked fine. Then suddenly it started causing Kernal Panics. It happens about 30% of the time. It scans the first 10% then throws up the Kernel Panic message and I'm forced to restart. I have run the Disk Repair Utility, repaired permissions, reinstalled the Agfa Scanwise driver, deleted all scanner related preferences and disconnected all other USB devices but nothing seems to work. The only software update I've done recently is the August and Java Security updates. Could either of these things be the problem? This is the first time I've had Kernel Panics on my Mac Mini. I doubt it's caused by the ram. It has worked flawlessly since I put in the 1GB module in July.
Does anyone have any ideas?
Cheers
djonWell, I downloaded Vuescan and set it up but now I have another problem. Vuescan constantly crashes. Sometimes it crashes when I'm changing settings and sometimes is crashes after a scan. I set the memory settings very high so it shouldn't be a memory issue. I've tried just about everything to get this scanner working with Vuescan. I even installed a fresh copy of Panther on my Firewire drive but it only reduced the crashes not eliminate them. I'd like to get Vuescan working because it seems to make better scans than Scanwise did. At least it doesn't cause Kernel Panics. Does anyone have any idea what's going on? I'm beginning to think that it might be a hardware problem with the scanner.
djon -
Readynas duo mounted over ethernet causes kernel panics
I've found out what is causing kernel panics on my machines, but i'm not sure how to resolve it. I have a g4 laptop and a new mac mini, both mount the readynas via mount_afp using a LoginHook. When the laptop or the mini go to sleep, the ethernet connection is powered off and at some point the readynas goes to sleep as well. So, when the laptop/mini wake from sleep, they have trouble re-establishing the mount to the readynas (as it needs time to spin it's drives up) and then the laptop/mini kernel panic...shouldn't this really be just a lost connection message, rather than a full fledged panic!
This is where we have a difference of opinion...If i can mount an external box over ethernet/firewire/usb and it causes the machine to kernel panic, then the software is not robust enough to handle the exception cases. Running 10.4.x for years with the same external hardware never yielded such results.
-
External LaCie Multi Recorder causing kernel panics since reloading OS
I just replaced my main internal hd with a new 1TB WD Caviar Black. I migrated all of my user information from my old drive via Time Machine & all seemed well. Since I did a fresh, zero out data install of the OS on the new drive, I need to reinstall my programs. Some of my older programs are kept on DVD-RAM disks that I've had since my old G4. To access these files I use my LaCie Multi recorder which was working fine prior to the HD switch.
When I put my DVD-RAM disk into the drive it's now causing kernel panics.
Anyone know what could have caused this or how I might correct the problem?
Thanks.Okay, it seems that I've got a bad disk. I connected the drive to my laptop & used another dvd & all worked as it should. Put my program back-up disk in & it caused a panic.
New question, is there any way to repair the disk?
I've got DiskWarrior & TechTool Deluxe but I'm not sure how I might go about the repair as the panic occurs while the drive is trying to access the disk. -
Hi all,
I've got an rt3062 chipset wireless card and it's been causing kernel panics ever since the upgrade to linux-3.0.
I was using the driver and firmware supplied by ralink and compiling it as the rt3562sta driver and it used to work great but it doesnt seem to support anything higher than kernel 2.6.39.
I'm not exactly sure which error logs to post, so...
Anybody else having this issue? and maybe find a workaround?
ThanksI am using the same combination, successfully, with kernel 3.0.7-1. I do not recall having to do anything special to get it to work.
06:00.0 Network controller: Ralink corp. Device 3062
Subsystem: Ralink corp. Device 3062
Flags: bus master, slow devsel, latency 32, IRQ 19
Memory at fbdf0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Kernel driver in use: rt2860
Kernel modules: rt3562sta, rt2800pci
Tim -
ITunes causing kernel panics because I'm streaming to multiple Airplay Speakers?
Any idea what is causing kernel panics that seems to have started when I began streaming to multiple Airplay Speakers? iTunes is listed as the culprit in the crash report.
My question: is there a way to select multiple speakers from AppleTV for Airplay?
Unfortunately not. -
CF Adapter ExpressCard causing kernel panic
I purchased a ExpressCard Compact Flash Adapter. This is a generic adapter which
seems to be made by JMicron with Model DR25. There seems to be several branded versions of this DR25 model.
JMicron create compliant cards to the standard (I am presuming it is the card I have)
http://www.expresscard.org/web/do/pub/product/view?id=111
System Profiler shows
Vendor ID: 0x197b (which is JMicron)
Device ID: 0x2368 (Does this hex value correspond with product number from above URL)
Anyway, I mention the compliance above, as in the first hour of use cause 3 kernel panics. I have attached the latest panic report as a result. I have seen at least one other report on the web of problems with a variant of this card.
Is there a known hardware issue with this card? Either way, the kernel should not panic. Is this issue know/being looked at by Apple? I can provide more information if needed.
This card actually works quite well when it works, and I can read and write at 40MB/sec to my Sandisk Extreme IV.
BTW, the panics occurred in several different scenarios. The first was when browsing in coverflow mode. The panic thread was quicklookd. The second was when powered off the card, and the third was when pulling out the card, having unmounted the CF card.
Tue Nov 11 14:39:44 2008
panic(cpu 0 caller 0x001A9C5C): Kernel trap at 0x0042166f, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x01946000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x07ed9f60, ECX: 0x00000000, EDX: 0x07ed9f00
CR2: 0x00000000, EBP: 0x56bfbfa8, ESI: 0x07ed9f00, EDI: 0x07ed9f00
EFL: 0x00010202, EIP: 0x0042166f, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x56bfbdc8 : 0x12b4c9 (0x45aaac 0x56bfbdfc 0x1335ba 0x0)
0x56bfbe18 : 0x1a9c5c (0x464070 0x42166f 0xe 0x463820)
0x56bfbef8 : 0x1a026d (0x56bfbf10 0x258f96a0 0x56bfbfa8 0x42166f)
0x56bfbf08 : 0x42166f (0xe 0x56bf0048 0x140010 0x10)
0x56bfbfa8 : 0xa8b75f (0x743f840 0x1 0xa8b746 0x13672d)
0x56bfbfc8 : 0x1a005c (0x7ed9f00 0x0 0x1a30b5 0x6d66128)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOATABlockStorage(2.0.4)@0xa82000->0xa8ffff
dependency: com.apple.iokit.IOATAFamily(2.0.0)@0x78b000
dependency: com.apple.iokit.IOStorageFamily(1.5.4)@0x6cd000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9F2114
Kernel version:
Darwin Kernel Version 9.5.1: Fri Sep 19 16:19:24 PDT 2008; root:xnu-1228.8.30~1/RELEASE_I386
System model name: MacBookPro5,1 (Mac-F42D86C8)For clarification there are no drivers required for this card, if using Leopard.
Also I noticed this other entry for a different branded card on the expresscard.org website, using the DR25 model number. The picture in the provided product link is what my card looks like.
http://www.expresscard.org/web/do/pub/product/view?id=123
Message was edited by: leffatus -
10.6.8 causes Kernel Panic on MacPro 3,1 - Help Please
Hi All,
Made the mistake of updating to 10.6.8 yesterday and now I'm stuck in safe mode as any other restart cause a Kernel Panic. Below is my log if anyone has any thoughts on fixing the non-sense I'd appreciate it.
thanks!
Wed Jun 29 09:36:45 2011
panic(cpu 1 caller 0x560821): "getPhysicalSegment() out of 32b range 0x3f10000000, len 0x0, class IOGeneralMemoryDescriptor"@/SourceCache/xnu/xnu-1504.15.3/iokit/Kernel/IOMemory Descriptor.cpp:1594
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x86ea3ca8 : 0x21b837 (0x5dd7fc 0x86ea3cdc 0x223ce1 0x0)
0x86ea3cf8 : 0x560821 (0x5e6dfc 0x10000000 0x3f 0x0)
0x86ea3d48 : 0x55d2df (0xe4fd100 0x0 0x0 0xf853a00)
0x86ea3d68 : 0x55ceee (0xf853a00 0x0 0x0 0x86ea3d94)
0x86ea3d88 : 0x879c59bc (0xf853a00 0x0 0x0 0xf90aae0)
0x86ea3e18 : 0x543f60 (0x879e4000 0xe36c080 0x1 0x506b76)
0x86ea3e78 : 0x542137 (0xe36c080 0x879e4000 0xf933c80 0x51a1b0)
0x86ea3f28 : 0x5426e9 (0xe36c080 0xf90e880 0x0 0x516766)
0x86ea3f78 : 0x5443d5 (0xe36c080 0x8 0x86ea3fac 0x1)
0x86ea3fc8 : 0x2a179c (0xdf85520 0x0 0x10 0x0)
Kernel Extensions in backtrace (with dependencies):
com.aja.iokit.kona3(9.0.1)@0x8798e000->0x879e3fff
dependency: com.apple.iokit.IOSerialFamily(10.0.3)@0x875e8000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7c838000
dependency: com.apple.iokit.IOAudioFamily(1.8.3fc2)@0x876ad000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x87861000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 32866843218
unloaded kexts:
(none)
loaded kexts:
com.aja.iokit.kona3 9.0.1 - last loaded 32666152759
com.Seagate.driver.PowSecDriver 4.4.10
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.CSRHIDTransitionDriver 2.4.5f3
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.driver.PioneerSuperDrive 2.6.1
com.apple.driver.AppleRAID 4.0.6
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleIntel8254XEthernet 2.1.3b1
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.CSRUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.0
com.apple.iokit.IOFireWireSBP2 4.0.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0Get your files off the boot drive to a external drive. Not to the Seagate drive.
Any files on the Seagate drive, copy them off as well.
Hold c and boot off the installer disk 10.6, reinstall OS X.
These kexts are a bit strange and might be causing your issue. 10.6.8 broke a lot of third party kexts.
com.aja.iokit.kona3 9.0.1 - last loaded 32666152759
com.Seagate.driver.PowSecDriver 4.4.10
Follow these documents.
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/TS1440
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/ht3964
Maybe you are looking for
-
Possible to switch ide drives back to hdX or at least boot by UUID?
I have been messing around for a while on this machine trying to get it to boot properly from a compact flash card connected to the ide controller. It boots fine by using the /dev/sda designation in grub but will not work using UUID. Here is the set
-
How to create a trigger for particular value insertion?
If I have a Table T, which has columns as A,B,C,D. I want to create a trigger to give an error message if someone inserts or updates T with values in A as '001' AND value in B as '99' Please reply soon.... Thanks
-
Photoshop elements 9 freezes and crashes on Windows 7
I've just got Elements 9 - my first, Photoshop product, and I'm still very much finding my way around BUT... every time I've used it at some point it 'fails to respond' and I get the windows blue circle. This usually rights itself after 30secs or so
-
Storing and Linking from background
Hi Experts, We have documents stored in OmniDocs Document Management systems. These documents need to be linked to SAP Business Objects (Sales Order etc.). Our development environment is Java/JCo. I had seen several posts with this scenario but need
-
What is the status of Quicken that will run in iOS5?
What is the status of Quicken that will run on iOS5?